! Started logfile: /image_prod/ug002_uva//J0752+5809_S_dfm.log on Wed Mar  4 22:03:28 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0752+5809_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0752+5809_S_uva.fits
! AN table 1: 45 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.805291 visibilities/baseline/integration-bin.
! Found source: J0752+5809
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2283 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0752+5809_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006036Jy  sigma=8.189044
! Fit after  self-cal, rms=0.944395Jy  sigma=7.671590
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.075 mas, bmaj=13.78 mas, bpa=81.91 degrees
! Estimated noise=2.19972 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0446617 Jy
! Component: 100  -  total flux cleaned = 0.0589353 Jy
! Total flux subtracted in 100 components = 0.0589353 Jy
! Clean residual min=-0.004302 max=0.006333 Jy/beam
! Clean residual mean=-0.000012 rms=0.001364 Jy/beam
! Combined flux in latest and established models = 0.0589353 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0589353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064331Jy  sigma=0.453683
! Fit after  self-cal, rms=0.063250Jy  sigma=0.446316
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.664 mas, bmaj=14.47 mas, bpa=81.24 degrees
! Estimated noise=1.88698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00905401 Jy
! Component: 100  -  total flux cleaned = 0.0143187 Jy
! Component: 150  -  total flux cleaned = 0.0176212 Jy
! Component: 200  -  total flux cleaned = 0.0197825 Jy
! Total flux subtracted in 200 components = 0.0197825 Jy
! Clean residual min=-0.003431 max=0.003899 Jy/beam
! Clean residual mean=0.000002 rms=0.001097 Jy/beam
! Combined flux in latest and established models = 0.0787179 Jy
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 103 components and 0.0787179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061707Jy  sigma=0.435228
! Fit after  self-cal, rms=0.061664Jy  sigma=0.434534
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.664 x 14.47 at 81.24 degrees (North through East)
! Clean map  min=-0.0034562  max=0.057805 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.96     KP        0.94     LA        1.07     
!   NL        1.14     OV        1.05     PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.03     KP        0.98     LA        1.03     
!   NL        1.07     OV        0.94     PT        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.99     KP        1.05     LA        1.07     
!   NL        1.02     OV        1.02     PT        0.99     
! 
! 
! Fit before self-cal, rms=0.061664Jy  sigma=0.434534
! Fit after  self-cal, rms=0.061167Jy  sigma=0.433144
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.631 mas, bmaj=14.43 mas, bpa=80.46 degrees
! Estimated noise=1.88617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225792 Jy
! Component: 100  -  total flux cleaned = 0.00362742 Jy
! Component: 150  -  total flux cleaned = 0.00428948 Jy
! Component: 200  -  total flux cleaned = 0.00449359 Jy
! Total flux subtracted in 200 components = 0.00449359 Jy
! Clean residual min=-0.003383 max=0.004249 Jy/beam
! Clean residual mean=0.000007 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 0.0832114 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 118 components and 0.0832114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061005Jy  sigma=0.432881
! Fit after  self-cal, rms=0.061024Jy  sigma=0.432734
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061024Jy  sigma=0.432734
! Fit after  self-cal, rms=0.057744Jy  sigma=0.425793
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.713 mas, bmaj=14.07 mas, bpa=78.57 degrees
! Estimated noise=1.86768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000973646 Jy
! Component: 100  -  total flux cleaned = 0.001235 Jy
! Component: 150  -  total flux cleaned = 0.00129606 Jy
! Component: 200  -  total flux cleaned = 0.00137167 Jy
! Total flux subtracted in 200 components = 0.00137167 Jy
! Clean residual min=-0.002127 max=0.002849 Jy/beam
! Clean residual mean=0.000028 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.0845831 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 144 components and 0.0845831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057683Jy  sigma=0.425548
! Fit after  self-cal, rms=0.057665Jy  sigma=0.425090
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000151552 Jy
! Component: 100  -  total flux cleaned = 0.000223164 Jy
! Component: 150  -  total flux cleaned = 0.000244419 Jy
! Component: 200  -  total flux cleaned = 0.000263656 Jy
! Total flux subtracted in 200 components = 0.000263656 Jy
! Clean residual min=-0.002004 max=0.002762 Jy/beam
! Clean residual mean=0.000029 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.0848468 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 162 components and 0.0848468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057637Jy  sigma=0.425023
! Fit after  self-cal, rms=0.057634Jy  sigma=0.425007
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057634Jy  sigma=0.425007
! Fit after  self-cal, rms=0.057006Jy  sigma=0.424844
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.694 mas, bmaj=13.92 mas, bpa=78.75 degrees
! Estimated noise=1.85166 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000420742 Jy
! Component: 100  -  total flux cleaned = 0.000623681 Jy
! Component: 150  -  total flux cleaned = 0.000727327 Jy
! Component: 200  -  total flux cleaned = 0.000798634 Jy
! Total flux subtracted in 200 components = 0.000798634 Jy
! Clean residual min=-0.001917 max=0.002787 Jy/beam
! Clean residual mean=0.000029 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.0856454 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 174 components and 0.0856454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056975Jy  sigma=0.424753
! Fit after  self-cal, rms=0.056975Jy  sigma=0.424727
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128301 Jy
! Component: 100  -  total flux cleaned = 0.000145388 Jy
! Component: 150  -  total flux cleaned = 0.000145395 Jy
! Component: 200  -  total flux cleaned = 0.000130839 Jy
! Total flux subtracted in 200 components = 0.000130839 Jy
! Clean residual min=-0.001977 max=0.002739 Jy/beam
! Clean residual mean=0.000030 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.0857762 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 189 components and 0.0857762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056959Jy  sigma=0.424693
! Fit after  self-cal, rms=0.056956Jy  sigma=0.424685
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056956Jy  sigma=0.424685
! Fit after  self-cal, rms=0.056405Jy  sigma=0.424639
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.1 mas, bmaj=14.99 mas, bpa=75.37 degrees
! Estimated noise=1.84537 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000362395 Jy
! Component: 100  -  total flux cleaned = 0.00048434 Jy
! Component: 150  -  total flux cleaned = 0.000497202 Jy
! Component: 200  -  total flux cleaned = 0.000497454 Jy
! Total flux subtracted in 200 components = 0.000497454 Jy
! Clean residual min=-0.001955 max=0.002561 Jy/beam
! Clean residual mean=0.000036 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.0862737 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 199 components and 0.0862737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056389Jy  sigma=0.424601
! Fit after  self-cal, rms=0.056385Jy  sigma=0.424593
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.41673e-05 Jy
! Component: 100  -  total flux cleaned = 2.83574e-05 Jy
! Component: 150  -  total flux cleaned = 2.789e-05 Jy
! Component: 200  -  total flux cleaned = 2.82208e-05 Jy
! Total flux subtracted in 200 components = 2.82208e-05 Jy
! Clean residual min=-0.001984 max=0.002531 Jy/beam
! Clean residual mean=0.000036 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.0863019 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 203 components and 0.0863019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056375Jy  sigma=0.424572
! Fit after  self-cal, rms=0.056371Jy  sigma=0.424568
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.663 mas, bmaj=13.83 mas, bpa=79.2 degrees
! Estimated noise=1.84043 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.663 x 13.83 at 79.2 degrees (North through East)
! Clean map  min=-0.0019739  max=0.05543 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.033 mas, bmaj=13.22 mas, bpa=80.07 degrees
! Estimated noise=2.16159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0448651 Jy
! Component: 100  -  total flux cleaned = 0.0615814 Jy
! Component: 150  -  total flux cleaned = 0.0704136 Jy
! Component: 200  -  total flux cleaned = 0.0758084 Jy
! Total flux subtracted in 200 components = 0.0758084 Jy
! Clean residual min=-0.002758 max=0.002831 Jy/beam
! Clean residual mean=0.000017 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.0758084 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 61 model components to the UV plane model.
! The established model now contains 61 components and 0.0758084 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.663 mas, bmaj=13.83 mas, bpa=79.2 degrees
! Estimated noise=1.84043 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00391156 Jy
! Component: 100  -  total flux cleaned = 0.00635854 Jy
! Component: 150  -  total flux cleaned = 0.00794835 Jy
! Component: 200  -  total flux cleaned = 0.00899091 Jy
! Total flux subtracted in 200 components = 0.00899091 Jy
! Clean residual min=-0.002101 max=0.002878 Jy/beam
! Clean residual mean=0.000027 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.0847993 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 91 components and 0.0847993 Jy
! Inverting map 
! Added new window around map position (-105, -126).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232917 Jy
! Component: 100  -  total flux cleaned = 0.00289323 Jy
! Component: 150  -  total flux cleaned = 0.00332401 Jy
! Component: 200  -  total flux cleaned = 0.00370188 Jy
! Total flux subtracted in 200 components = 0.00370188 Jy
! Clean residual min=-0.002287 max=0.002426 Jy/beam
! Clean residual mean=0.000013 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.0885012 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 120 components and 0.0885012 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.1 mas, bmaj=14.99 mas, bpa=75.37 degrees
! Estimated noise=1.84537 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000692633 Jy
! Component: 100  -  total flux cleaned = 0.000878205 Jy
! Component: 150  -  total flux cleaned = 0.00100623 Jy
! Component: 200  -  total flux cleaned = 0.00116591 Jy
! Total flux subtracted in 200 components = 0.00116591 Jy
! Clean residual min=-0.002302 max=0.002273 Jy/beam
! Clean residual mean=0.000015 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.0896671 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130374 Jy
! Component: 100  -  total flux cleaned = 0.000253036 Jy
! Component: 150  -  total flux cleaned = 0.000384994 Jy
! Component: 200  -  total flux cleaned = 0.000477819 Jy
! Total flux subtracted in 200 components = 0.000477819 Jy
! Clean residual min=-0.002253 max=0.002276 Jy/beam
! Clean residual mean=0.000014 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.0901449 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 161 components and 0.0901449 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.663 mas, bmaj=13.83 mas, bpa=79.2 degrees
! Estimated noise=1.84043 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.92011e-05 Jy
! Component: 100  -  total flux cleaned = 0.00013481 Jy
! Component: 150  -  total flux cleaned = 0.000187297 Jy
! Component: 200  -  total flux cleaned = 0.000237143 Jy
! Total flux subtracted in 200 components = 0.000237143 Jy
! Clean residual min=-0.002156 max=0.002472 Jy/beam
! Clean residual mean=0.000011 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.0903821 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 178 components and 0.0903821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056221Jy  sigma=0.423635
! Fit after  self-cal, rms=0.056208Jy  sigma=0.423397
wmodel J0752+5809_S_map.mod
! Writing 178 model components to file: J0752+5809_S_map.mod
wobs   J0752+5809_S_uvs.fits
! Writing UV FITS file: J0752+5809_S_uvs.fits
wwins  J0752+5809_S_map.win
! wwins: Wrote 2 windows to J0752+5809_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000529385 Jy
! Component: 100  -  total flux cleaned = 0.00109767 Jy
! Component: 150  -  total flux cleaned = 0.00145368 Jy
! Component: 200  -  total flux cleaned = 0.00156971 Jy
! Component: 250  -  total flux cleaned = 0.00162517 Jy
! Component: 300  -  total flux cleaned = 0.00162564 Jy
! Component: 350  -  total flux cleaned = 0.00157729 Jy
! Component: 400  -  total flux cleaned = 0.00157772 Jy
! Component: 450  -  total flux cleaned = 0.00148689 Jy
! Component: 500  -  total flux cleaned = 0.0014873 Jy
! Component: 550  -  total flux cleaned = 0.00150931 Jy
! Component: 600  -  total flux cleaned = 0.00153 Jy
! Component: 650  -  total flux cleaned = 0.00153005 Jy
! Component: 700  -  total flux cleaned = 0.00153023 Jy
! Component: 750  -  total flux cleaned = 0.00154947 Jy
! Component: 800  -  total flux cleaned = 0.00151227 Jy
! Component: 850  -  total flux cleaned = 0.0014759 Jy
! Component: 900  -  total flux cleaned = 0.00138653 Jy
! Component: 950  -  total flux cleaned = 0.00136905 Jy
! Component: 1000  -  total flux cleaned = 0.00131749 Jy
! Component: 1050  -  total flux cleaned = 0.00128423 Jy
! Component: 1100  -  total flux cleaned = 0.00126758 Jy
! Component: 1150  -  total flux cleaned = 0.00120249 Jy
! Component: 1200  -  total flux cleaned = 0.00110703 Jy
! Component: 1250  -  total flux cleaned = 0.00104453 Jy
! Component: 1300  -  total flux cleaned = 0.00102948 Jy
! Component: 1350  -  total flux cleaned = 0.000999215 Jy
! Component: 1400  -  total flux cleaned = 0.000969554 Jy
! Component: 1450  -  total flux cleaned = 0.000940422 Jy
! Component: 1500  -  total flux cleaned = 0.000897478 Jy
! Component: 1550  -  total flux cleaned = 0.000869694 Jy
! Component: 1600  -  total flux cleaned = 0.000883815 Jy
! Component: 1650  -  total flux cleaned = 0.000870357 Jy
! Component: 1700  -  total flux cleaned = 0.000883625 Jy
! Component: 1750  -  total flux cleaned = 0.000830577 Jy
! Component: 1800  -  total flux cleaned = 0.000804566 Jy
! Component: 1850  -  total flux cleaned = 0.000766174 Jy
! Component: 1900  -  total flux cleaned = 0.000728012 Jy
! Component: 1950  -  total flux cleaned = 0.000740699 Jy
! Component: 2000  -  total flux cleaned = 0.000715819 Jy
! Component: 2050  -  total flux cleaned = 0.000679026 Jy
! Component: 2100  -  total flux cleaned = 0.00063039 Jy
! Component: 2150  -  total flux cleaned = 0.000582389 Jy
! Component: 2200  -  total flux cleaned = 0.000570293 Jy
! Component: 2250  -  total flux cleaned = 0.0004878 Jy
! Component: 2300  -  total flux cleaned = 0.000476245 Jy
! Component: 2350  -  total flux cleaned = 0.000453154 Jy
! Component: 2400  -  total flux cleaned = 0.000464582 Jy
! Component: 2450  -  total flux cleaned = 0.00041906 Jy
! Component: 2500  -  total flux cleaned = 0.000385247 Jy
! Component: 2550  -  total flux cleaned = 0.000407668 Jy
! Component: 2600  -  total flux cleaned = 0.00038535 Jy
! Component: 2650  -  total flux cleaned = 0.000374198 Jy
! Component: 2700  -  total flux cleaned = 0.000352208 Jy
! Component: 2750  -  total flux cleaned = 0.000374072 Jy
! Component: 2800  -  total flux cleaned = 0.000395618 Jy
! Component: 2850  -  total flux cleaned = 0.000363206 Jy
! Component: 2900  -  total flux cleaned = 0.000363205 Jy
! Component: 2950  -  total flux cleaned = 0.000352603 Jy
! Component: 3000  -  total flux cleaned = 0.000342101 Jy
! Component: 3050  -  total flux cleaned = 0.000331664 Jy
! Component: 3100  -  total flux cleaned = 0.000352603 Jy
! Component: 3150  -  total flux cleaned = 0.000331833 Jy
! Component: 3200  -  total flux cleaned = 0.000331901 Jy
! Component: 3250  -  total flux cleaned = 0.000331839 Jy
! Component: 3300  -  total flux cleaned = 0.000290843 Jy
! Component: 3350  -  total flux cleaned = 0.000311225 Jy
! Component: 3400  -  total flux cleaned = 0.000311263 Jy
! Component: 3450  -  total flux cleaned = 0.000311231 Jy
! Component: 3500  -  total flux cleaned = 0.00032125 Jy
! Component: 3550  -  total flux cleaned = 0.000291209 Jy
! Component: 3600  -  total flux cleaned = 0.000291254 Jy
! Component: 3650  -  total flux cleaned = 0.000301175 Jy
! Component: 3700  -  total flux cleaned = 0.000311123 Jy
! Component: 3750  -  total flux cleaned = 0.00033086 Jy
! Component: 3800  -  total flux cleaned = 0.000340627 Jy
! Component: 3850  -  total flux cleaned = 0.000370055 Jy
! Component: 3900  -  total flux cleaned = 0.000379843 Jy
! Component: 3950  -  total flux cleaned = 0.000389617 Jy
! Component: 4000  -  total flux cleaned = 0.000399302 Jy
! Component: 4050  -  total flux cleaned = 0.000409039 Jy
! Total flux subtracted in 4096 components = 0.000428369 Jy
! Clean residual min=-0.000509 max=0.000536 Jy/beam
! Clean residual mean=-0.000006 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.0908105 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 469 components and 0.0908105 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0752+5809_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.663 x 13.83 at 79.2 degrees (North through East)
! Clean map  min=-0.0015737  max=0.05588 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0752+5809_S_map.fits
wmodel /image_prod/ug002_uva//J0752+5809_S_map.mod
! Writing 469 model components to file: /image_prod/ug002_uva//J0752+5809_S_map.mod
wobs   /image_prod/ug002_uva//J0752+5809_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0752+5809_S_uvs.fits
wwins  /image_prod/ug002_uva//J0752+5809_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0752+5809_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0558805 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000189212 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.0158 1.0158 2.03161 4.06321 8.12642 16.2528 32.5057 65.0114
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.055 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  295.332 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0752+5809_S_dfm.log closed on Wed Mar  4 22:03:32 2020