! Started logfile: /image_prod/ug002_uva//J0750+8241_S_dfm.log on Wed Mar  4 22:02:02 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0750+8241_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0750+8241_S_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.872963 visibilities/baseline/integration-bin.
! Found source: J0750+8241
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7071 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0750+8241_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.144800Jy  sigma=7.371562
! Fit after  self-cal, rms=0.523283Jy  sigma=3.395344
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.232 mas, bmaj=3.324 mas, bpa=-46.78 degrees
! Estimated noise=1.91906 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.360105 Jy
! Component: 100  -  total flux cleaned = 0.475198 Jy
! Total flux subtracted in 100 components = 0.475198 Jy
! Clean residual min=-0.019783 max=0.050435 Jy/beam
! Clean residual mean=-0.000258 rms=0.005730 Jy/beam
! Combined flux in latest and established models = 0.475198 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.475198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.176753Jy  sigma=1.003930
! Fit after  self-cal, rms=0.176638Jy  sigma=1.003101
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0566521 Jy
! Component: 100  -  total flux cleaned = 0.0890776 Jy
! Total flux subtracted in 100 components = 0.0890776 Jy
! Clean residual min=-0.016961 max=0.032541 Jy/beam
! Clean residual mean=-0.000165 rms=0.004301 Jy/beam
! Combined flux in latest and established models = 0.564275 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.564275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.147310Jy  sigma=0.819002
! Fit after  self-cal, rms=0.147152Jy  sigma=0.818081
! Inverting map 
! Added new window around map position (-1, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0311342 Jy
! Component: 100  -  total flux cleaned = 0.0503686 Jy
! Total flux subtracted in 100 components = 0.0503686 Jy
! Clean residual min=-0.016040 max=0.017955 Jy/beam
! Clean residual mean=-0.000112 rms=0.003764 Jy/beam
! Combined flux in latest and established models = 0.614644 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 40 components and 0.614644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.135547Jy  sigma=0.747271
! Fit after  self-cal, rms=0.134759Jy  sigma=0.741718
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.032 mas, bmaj=4.115 mas, bpa=-53.94 degrees
! Estimated noise=1.34658 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.5, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278788 Jy
! Component: 100  -  total flux cleaned = 0.0444754 Jy
! Component: 150  -  total flux cleaned = 0.0560153 Jy
! Component: 200  -  total flux cleaned = 0.0613259 Jy
! Total flux subtracted in 200 components = 0.0613259 Jy
! Clean residual min=-0.014903 max=0.017696 Jy/beam
! Clean residual mean=-0.000114 rms=0.004104 Jy/beam
! Combined flux in latest and established models = 0.67597 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 82 components and 0.67597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.127216Jy  sigma=0.697238
! Fit after  self-cal, rms=0.126267Jy  sigma=0.690176
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.032 x 4.115 at -53.94 degrees (North through East)
! Clean map  min=-0.01422  max=0.47602 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.94     HN        1.02     KP        0.99     
!   LA        0.99     MK        1.00     NL        0.97     OV        0.91     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.97     HN        0.97     KP        1.02     
!   LA        1.00     MK        1.00     NL        0.99     OV        1.25     
!   PT        1.00     SC        0.86     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.94     HN        1.02     KP        1.01     
!   LA        1.01     MK        1.01     NL        0.95     OV        0.94     
!   PT        1.01     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.126267Jy  sigma=0.690176
! Fit after  self-cal, rms=0.122711Jy  sigma=0.628830
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.017 mas, bmaj=4.082 mas, bpa=-50.85 degrees
! Estimated noise=1.34305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, 23.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199771 Jy
! Component: 100  -  total flux cleaned = 0.0318366 Jy
! Component: 150  -  total flux cleaned = 0.0380127 Jy
! Component: 200  -  total flux cleaned = 0.042106 Jy
! Total flux subtracted in 200 components = 0.042106 Jy
! Clean residual min=-0.011061 max=0.014731 Jy/beam
! Clean residual mean=-0.000007 rms=0.003185 Jy/beam
! Combined flux in latest and established models = 0.718076 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 105 components and 0.718076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118818Jy  sigma=0.599825
! Fit after  self-cal, rms=0.118558Jy  sigma=0.597537
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118558Jy  sigma=0.597537
! Fit after  self-cal, rms=0.072907Jy  sigma=0.419346
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.982 mas, bmaj=4.111 mas, bpa=-52.27 degrees
! Estimated noise=1.33256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100098 Jy
! Component: 100  -  total flux cleaned = 0.0127108 Jy
! Component: 150  -  total flux cleaned = 0.0137266 Jy
! Component: 200  -  total flux cleaned = 0.0143775 Jy
! Total flux subtracted in 200 components = 0.0143775 Jy
! Clean residual min=-0.003574 max=0.004940 Jy/beam
! Clean residual mean=0.000011 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 0.732454 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 125 components and 0.732453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071351Jy  sigma=0.408759
! Fit after  self-cal, rms=0.071276Jy  sigma=0.407492
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-23.5, -48).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00422031 Jy
! Component: 100  -  total flux cleaned = 0.00593199 Jy
! Component: 150  -  total flux cleaned = 0.00710675 Jy
! Component: 200  -  total flux cleaned = 0.00809573 Jy
! Total flux subtracted in 200 components = 0.00809573 Jy
! Clean residual min=-0.003389 max=0.003665 Jy/beam
! Clean residual mean=0.000018 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.740549 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 146 components and 0.740549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070842Jy  sigma=0.404467
! Fit after  self-cal, rms=0.070818Jy  sigma=0.404316
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070818Jy  sigma=0.404316
! Fit after  self-cal, rms=0.070364Jy  sigma=0.401895
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.966 mas, bmaj=4.113 mas, bpa=-53.43 degrees
! Estimated noise=1.33194 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407665 Jy
! Component: 100  -  total flux cleaned = 0.00540768 Jy
! Component: 150  -  total flux cleaned = 0.00610043 Jy
! Component: 200  -  total flux cleaned = 0.00647972 Jy
! Total flux subtracted in 200 components = 0.00647972 Jy
! Clean residual min=-0.002614 max=0.002991 Jy/beam
! Clean residual mean=0.000005 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.747029 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 159 components and 0.747029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070024Jy  sigma=0.399514
! Fit after  self-cal, rms=0.069999Jy  sigma=0.399326
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000960622 Jy
! Component: 100  -  total flux cleaned = 0.00149527 Jy
! Component: 150  -  total flux cleaned = 0.00161072 Jy
! Component: 200  -  total flux cleaned = 0.00182474 Jy
! Total flux subtracted in 200 components = 0.00182474 Jy
! Clean residual min=-0.002547 max=0.002791 Jy/beam
! Clean residual mean=0.000009 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.748854 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 172 components and 0.748854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069887Jy  sigma=0.398590
! Fit after  self-cal, rms=0.069882Jy  sigma=0.398539
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069882Jy  sigma=0.398539
! Fit after  self-cal, rms=0.069735Jy  sigma=0.397953
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.946 mas, bmaj=9.086 mas, bpa=78.05 degrees
! Estimated noise=1.76266 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00343499 Jy
! Component: 100  -  total flux cleaned = 0.00343567 Jy
! Component: 150  -  total flux cleaned = 0.00343562 Jy
! Component: 200  -  total flux cleaned = 0.00348091 Jy
! Total flux subtracted in 200 components = 0.00348091 Jy
! Clean residual min=-0.002823 max=0.003173 Jy/beam
! Clean residual mean=0.000013 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.752335 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 207 components and 0.752335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069665Jy  sigma=0.397433
! Fit after  self-cal, rms=0.069645Jy  sigma=0.397298
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000526225 Jy
! Component: 100  -  total flux cleaned = 0.000671828 Jy
! Component: 150  -  total flux cleaned = 0.000668623 Jy
! Component: 200  -  total flux cleaned = 0.000739028 Jy
! Total flux subtracted in 200 components = 0.000739028 Jy
! Clean residual min=-0.002882 max=0.003181 Jy/beam
! Clean residual mean=0.000018 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.753074 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 223 components and 0.753074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069616Jy  sigma=0.397116
! Fit after  self-cal, rms=0.069608Jy  sigma=0.397065
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.955 mas, bmaj=4.114 mas, bpa=-53.51 degrees
! Estimated noise=1.33158 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.955 x 4.114 at -53.51 degrees (North through East)
! Clean map  min=-0.0022397  max=0.46903 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.189 mas, bmaj=3.338 mas, bpa=-48.31 degrees
! Estimated noise=1.8821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.353401 Jy
! Component: 100  -  total flux cleaned = 0.467514 Jy
! Component: 150  -  total flux cleaned = 0.526819 Jy
! Component: 200  -  total flux cleaned = 0.566353 Jy
! Total flux subtracted in 200 components = 0.566353 Jy
! Clean residual min=-0.009271 max=0.021941 Jy/beam
! Clean residual mean=-0.000183 rms=0.002849 Jy/beam
! Combined flux in latest and established models = 0.566354 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.566354 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.955 mas, bmaj=4.114 mas, bpa=-53.51 degrees
! Estimated noise=1.33158 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0480606 Jy
! Component: 100  -  total flux cleaned = 0.0797289 Jy
! Component: 150  -  total flux cleaned = 0.102514 Jy
! Component: 200  -  total flux cleaned = 0.1194 Jy
! Total flux subtracted in 200 components = 0.1194 Jy
! Clean residual min=-0.005499 max=0.009819 Jy/beam
! Clean residual mean=-0.000152 rms=0.001600 Jy/beam
! Combined flux in latest and established models = 0.685753 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 74 components and 0.685753 Jy
! Inverting map 
! Added new window around map position (2, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129015 Jy
! Component: 100  -  total flux cleaned = 0.02291 Jy
! Component: 150  -  total flux cleaned = 0.0307462 Jy
! Component: 200  -  total flux cleaned = 0.0369373 Jy
! Total flux subtracted in 200 components = 0.0369373 Jy
! Clean residual min=-0.003513 max=0.004230 Jy/beam
! Clean residual mean=-0.000057 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.722691 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 126 components and 0.722691 Jy
! Inverting map 
! Added new window around map position (-5.5, 31.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00511286 Jy
! Component: 100  -  total flux cleaned = 0.00931475 Jy
! Component: 150  -  total flux cleaned = 0.0128656 Jy
! Component: 200  -  total flux cleaned = 0.0159051 Jy
! Total flux subtracted in 200 components = 0.0159051 Jy
! Clean residual min=-0.002725 max=0.002965 Jy/beam
! Clean residual mean=-0.000021 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.738596 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 175 components and 0.738596 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.946 mas, bmaj=9.086 mas, bpa=78.05 degrees
! Estimated noise=1.76266 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00457367 Jy
! Component: 100  -  total flux cleaned = 0.00778264 Jy
! Component: 150  -  total flux cleaned = 0.00948192 Jy
! Component: 200  -  total flux cleaned = 0.0107757 Jy
! Total flux subtracted in 200 components = 0.0107757 Jy
! Clean residual min=-0.003207 max=0.002841 Jy/beam
! Clean residual mean=-0.000000 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.749372 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100371 Jy
! Component: 100  -  total flux cleaned = 0.00151864 Jy
! Component: 150  -  total flux cleaned = 0.00201521 Jy
! Component: 200  -  total flux cleaned = 0.00240623 Jy
! Total flux subtracted in 200 components = 0.00240623 Jy
! Clean residual min=-0.003170 max=0.002696 Jy/beam
! Clean residual mean=0.000011 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.751778 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 247 components and 0.751778 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.955 mas, bmaj=4.114 mas, bpa=-53.51 degrees
! Estimated noise=1.33158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014104 Jy
! Component: 100  -  total flux cleaned = -1.68612e-05 Jy
! Component: 150  -  total flux cleaned = 9.36234e-05 Jy
! Component: 200  -  total flux cleaned = 0.000196493 Jy
! Total flux subtracted in 200 components = 0.000196493 Jy
! Clean residual min=-0.002375 max=0.002725 Jy/beam
! Clean residual mean=0.000005 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.751974 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 268 components and 0.751974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069541Jy  sigma=0.396728
! Fit after  self-cal, rms=0.069485Jy  sigma=0.396388
wmodel J0750+8241_S_map.mod
! Writing 268 model components to file: J0750+8241_S_map.mod
wobs   J0750+8241_S_uvs.fits
! Writing UV FITS file: J0750+8241_S_uvs.fits
wwins  J0750+8241_S_map.win
! wwins: Wrote 7 windows to J0750+8241_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000466196 Jy
! Component: 100  -  total flux cleaned = 0.000724946 Jy
! Component: 150  -  total flux cleaned = 0.00084936 Jy
! Component: 200  -  total flux cleaned = 0.000929053 Jy
! Component: 250  -  total flux cleaned = 0.000850464 Jy
! Component: 300  -  total flux cleaned = 0.000927514 Jy
! Component: 350  -  total flux cleaned = 0.000890564 Jy
! Component: 400  -  total flux cleaned = 0.00074508 Jy
! Component: 450  -  total flux cleaned = 0.000602946 Jy
! Component: 500  -  total flux cleaned = 0.00035949 Jy
! Component: 550  -  total flux cleaned = 0.000360283 Jy
! Component: 600  -  total flux cleaned = 0.000159173 Jy
! Component: 650  -  total flux cleaned = 6.08452e-05 Jy
! Component: 700  -  total flux cleaned = -4.27021e-06 Jy
! Component: 750  -  total flux cleaned = -0.000162929 Jy
! Component: 800  -  total flux cleaned = -0.000287465 Jy
! Component: 850  -  total flux cleaned = -0.000379047 Jy
! Component: 900  -  total flux cleaned = -0.000318775 Jy
! Component: 950  -  total flux cleaned = -0.000437266 Jy
! Component: 1000  -  total flux cleaned = -0.000378386 Jy
! Component: 1050  -  total flux cleaned = -0.000378922 Jy
! Component: 1100  -  total flux cleaned = -0.000378831 Jy
! Component: 1150  -  total flux cleaned = -0.000350537 Jy
! Component: 1200  -  total flux cleaned = -0.000350489 Jy
! Component: 1250  -  total flux cleaned = -0.000378356 Jy
! Component: 1300  -  total flux cleaned = -0.000405473 Jy
! Component: 1350  -  total flux cleaned = -0.000432184 Jy
! Component: 1400  -  total flux cleaned = -0.000405643 Jy
! Component: 1450  -  total flux cleaned = -0.000405924 Jy
! Component: 1500  -  total flux cleaned = -0.000406261 Jy
! Component: 1550  -  total flux cleaned = -0.000406003 Jy
! Component: 1600  -  total flux cleaned = -0.000355424 Jy
! Component: 1650  -  total flux cleaned = -0.000380674 Jy
! Component: 1700  -  total flux cleaned = -0.000380762 Jy
! Component: 1750  -  total flux cleaned = -0.000307351 Jy
! Component: 1800  -  total flux cleaned = -0.000283294 Jy
! Component: 1850  -  total flux cleaned = -0.000331541 Jy
! Component: 1900  -  total flux cleaned = -0.000331543 Jy
! Component: 1950  -  total flux cleaned = -0.000355124 Jy
! Component: 2000  -  total flux cleaned = -0.00033187 Jy
! Component: 2050  -  total flux cleaned = -0.000308936 Jy
! Component: 2100  -  total flux cleaned = -0.0004236 Jy
! Component: 2150  -  total flux cleaned = -0.000355732 Jy
! Component: 2200  -  total flux cleaned = -0.000400824 Jy
! Component: 2250  -  total flux cleaned = -0.000378586 Jy
! Component: 2300  -  total flux cleaned = -0.000334737 Jy
! Component: 2350  -  total flux cleaned = -0.000378639 Jy
! Component: 2400  -  total flux cleaned = -0.000335264 Jy
! Component: 2450  -  total flux cleaned = -0.000357115 Jy
! Component: 2500  -  total flux cleaned = -0.000335748 Jy
! Component: 2550  -  total flux cleaned = -0.000293359 Jy
! Component: 2600  -  total flux cleaned = -0.000293197 Jy
! Component: 2650  -  total flux cleaned = -0.00027219 Jy
! Component: 2700  -  total flux cleaned = -0.000292737 Jy
! Component: 2750  -  total flux cleaned = -0.000230959 Jy
! Component: 2800  -  total flux cleaned = -0.000190025 Jy
! Component: 2850  -  total flux cleaned = -6.91453e-05 Jy
! Component: 2900  -  total flux cleaned = -0.000109177 Jy
! Component: 2950  -  total flux cleaned = -4.95439e-05 Jy
! Component: 3000  -  total flux cleaned = -6.93383e-05 Jy
! Component: 3050  -  total flux cleaned = -1.09491e-05 Jy
! Component: 3100  -  total flux cleaned = 8.59932e-05 Jy
! Component: 3150  -  total flux cleaned = 2.83547e-05 Jy
! Component: 3200  -  total flux cleaned = 2.82865e-05 Jy
! Component: 3250  -  total flux cleaned = 0.000104364 Jy
! Component: 3300  -  total flux cleaned = 1.02219e-05 Jy
! Component: 3350  -  total flux cleaned = 8.5187e-05 Jy
! Component: 3400  -  total flux cleaned = 4.79576e-05 Jy
! Component: 3450  -  total flux cleaned = 1.09447e-05 Jy
! Component: 3500  -  total flux cleaned = 0.000120872 Jy
! Component: 3550  -  total flux cleaned = 4.81727e-05 Jy
! Component: 3600  -  total flux cleaned = 0.000102483 Jy
! Component: 3650  -  total flux cleaned = 8.47447e-05 Jy
! Component: 3700  -  total flux cleaned = 0.00013823 Jy
! Component: 3750  -  total flux cleaned = 0.000120664 Jy
! Component: 3800  -  total flux cleaned = 8.5509e-05 Jy
! Component: 3850  -  total flux cleaned = 0.000138142 Jy
! Component: 3900  -  total flux cleaned = 0.000138295 Jy
! Component: 3950  -  total flux cleaned = 0.000155703 Jy
! Component: 4000  -  total flux cleaned = 0.000172859 Jy
! Component: 4050  -  total flux cleaned = 0.000138783 Jy
! Total flux subtracted in 4096 components = 0.000240579 Jy
! Clean residual min=-0.001089 max=0.000887 Jy/beam
! Clean residual mean=0.000004 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.752215 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 571 components and 0.752215 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0750+8241_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.955 x 4.114 at -53.51 degrees (North through East)
! Clean map  min=-0.0016757  max=0.46925 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0750+8241_S_map.fits
wmodel /image_prod/ug002_uva//J0750+8241_S_map.mod
! Writing 571 model components to file: /image_prod/ug002_uva//J0750+8241_S_map.mod
wobs   /image_prod/ug002_uva//J0750+8241_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0750+8241_S_uvs.fits
wwins  /image_prod/ug002_uva//J0750+8241_S_map.win
! wwins: Wrote 8 windows to /image_prod/ug002_uva//J0750+8241_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.46925 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000307824 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.196797 0.196797 0.393595 0.78719 1.57438 3.14876 6.29752 12.595 25.1901 50.3801
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.469 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1524.41 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0750+8241_S_dfm.log closed on Wed Mar  4 22:02:06 2020