! Started logfile: /image_prod/ug002_uva//J0750+1919_S_dfm.log on Wed Mar 4 22:01:19 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0750+1919_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0750+1919_S_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.902593 visibilities/baseline/integration-bin. ! Found source: J0750+1919 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 7311 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0750+1919_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011913Jy sigma=8.677458 ! Fit after self-cal, rms=0.900768Jy sigma=7.731539 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=7.585 mas, bpa=-9.243 degrees ! Estimated noise=1.60223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0788928 Jy ! Component: 100 - total flux cleaned = 0.0961087 Jy ! Total flux subtracted in 100 components = 0.0961087 Jy ! Clean residual min=-0.004163 max=0.004858 Jy/beam ! Clean residual mean=0.000002 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.0961087 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0961087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063399Jy sigma=0.465068 ! Fit after self-cal, rms=0.063380Jy sigma=0.464980 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=8.549 mas, bpa=-7.575 degrees ! Estimated noise=0.998559 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357336 Jy ! Component: 100 - total flux cleaned = 0.00379671 Jy ! Component: 150 - total flux cleaned = 0.00367536 Jy ! Component: 200 - total flux cleaned = 0.00362641 Jy ! Total flux subtracted in 200 components = 0.00362641 Jy ! Clean residual min=-0.004006 max=0.003185 Jy/beam ! Clean residual mean=0.000005 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.0997351 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.0997351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063080Jy sigma=0.463071 ! Fit after self-cal, rms=0.063069Jy sigma=0.463057 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.527 x 8.549 at -7.575 degrees (North through East) ! Clean map min=-0.0038922 max=0.10071 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.00 KP 0.98 ! LA 1.06 MK 1.01 OV 0.84 PT 1.08 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.03 HN 0.99 KP 1.02 ! LA 1.11 MK 1.03 OV 0.89 PT 1.06 ! SC 0.79 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.99 KP 1.00 ! LA 1.01 MK 0.96 OV 0.88 PT 1.04 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.063069Jy sigma=0.463057 ! Fit after self-cal, rms=0.060192Jy sigma=0.454906 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=8.458 mas, bpa=-6.733 degrees ! Estimated noise=0.9923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388656 Jy ! Component: 100 - total flux cleaned = 0.000358704 Jy ! Component: 150 - total flux cleaned = 0.000331062 Jy ! Component: 200 - total flux cleaned = 0.000354393 Jy ! Total flux subtracted in 200 components = 0.000354393 Jy ! Clean residual min=-0.002145 max=0.002082 Jy/beam ! Clean residual mean=-0.000006 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.100089 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.100089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060163Jy sigma=0.454715 ! Fit after self-cal, rms=0.060163Jy sigma=0.454541 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060163Jy sigma=0.454541 ! Fit after self-cal, rms=0.059450Jy sigma=0.452644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=8.438 mas, bpa=-6.869 degrees ! Estimated noise=0.991846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184025 Jy ! Component: 100 - total flux cleaned = 0.000201124 Jy ! Component: 150 - total flux cleaned = 0.000199886 Jy ! Component: 200 - total flux cleaned = 0.000199878 Jy ! Total flux subtracted in 200 components = 0.000199878 Jy ! Clean residual min=-0.001699 max=0.001695 Jy/beam ! Clean residual mean=0.000000 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.100289 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.100289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059438Jy sigma=0.452579 ! Fit after self-cal, rms=0.059442Jy sigma=0.452551 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58162e-05 Jy ! Component: 100 - total flux cleaned = 3.98579e-05 Jy ! Component: 150 - total flux cleaned = 5.13499e-05 Jy ! Component: 200 - total flux cleaned = 6.19711e-05 Jy ! Total flux subtracted in 200 components = 6.19711e-05 Jy ! Clean residual min=-0.001707 max=0.001670 Jy/beam ! Clean residual mean=0.000000 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.100351 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.100351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059437Jy sigma=0.452521 ! Fit after self-cal, rms=0.059437Jy sigma=0.452518 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059437Jy sigma=0.452518 ! Fit after self-cal, rms=0.059374Jy sigma=0.452492 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=8.428 mas, bpa=-6.786 degrees ! Estimated noise=0.991547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233293 Jy ! Component: 100 - total flux cleaned = 0.000218775 Jy ! Component: 150 - total flux cleaned = 0.000218646 Jy ! Component: 200 - total flux cleaned = 0.000218852 Jy ! Total flux subtracted in 200 components = 0.000218852 Jy ! Clean residual min=-0.001677 max=0.001649 Jy/beam ! Clean residual mean=0.000000 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.10057 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.10057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059367Jy sigma=0.452449 ! Fit after self-cal, rms=0.059367Jy sigma=0.452446 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.08917e-06 Jy ! Component: 100 - total flux cleaned = 2.39777e-05 Jy ! Component: 150 - total flux cleaned = 2.44625e-05 Jy ! Component: 200 - total flux cleaned = 2.48644e-05 Jy ! Total flux subtracted in 200 components = 2.48644e-05 Jy ! Clean residual min=-0.001683 max=0.001642 Jy/beam ! Clean residual mean=0.000000 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.100595 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.100595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059363Jy sigma=0.452422 ! Fit after self-cal, rms=0.059363Jy sigma=0.452422 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059363Jy sigma=0.452422 ! Fit after self-cal, rms=0.059318Jy sigma=0.452405 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.911 mas, bmaj=11.83 mas, bpa=-1.255 degrees ! Estimated noise=1.19117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268358 Jy ! Component: 100 - total flux cleaned = 0.000253062 Jy ! Component: 150 - total flux cleaned = 0.000246363 Jy ! Component: 200 - total flux cleaned = 0.00024026 Jy ! Total flux subtracted in 200 components = 0.00024026 Jy ! Clean residual min=-0.001773 max=0.002048 Jy/beam ! Clean residual mean=0.000002 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.100835 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.100835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059317Jy sigma=0.452403 ! Fit after self-cal, rms=0.059316Jy sigma=0.452401 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.16612e-05 Jy ! Component: 100 - total flux cleaned = -2.15689e-05 Jy ! Component: 150 - total flux cleaned = -2.6051e-05 Jy ! Component: 200 - total flux cleaned = -2.99657e-05 Jy ! Total flux subtracted in 200 components = -2.99657e-05 Jy ! Clean residual min=-0.001763 max=0.002052 Jy/beam ! Clean residual mean=0.000002 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.100805 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 0.100805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059317Jy sigma=0.452406 ! Fit after self-cal, rms=0.059316Jy sigma=0.452404 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=8.418 mas, bpa=-6.716 degrees ! Estimated noise=0.991374 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 8.418 at -6.716 degrees (North through East) ! Clean map min=-0.0015904 max=0.10004 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=7.458 mas, bpa=-8.514 degrees ! Estimated noise=1.56956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0773103 Jy ! Component: 100 - total flux cleaned = 0.0942883 Jy ! Component: 150 - total flux cleaned = 0.0989631 Jy ! Component: 200 - total flux cleaned = 0.100567 Jy ! Total flux subtracted in 200 components = 0.100567 Jy ! Clean residual min=-0.002947 max=0.002830 Jy/beam ! Clean residual mean=-0.000001 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.100567 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.100567 Jy ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=8.418 mas, bpa=-6.716 degrees ! Estimated noise=0.991374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504476 Jy ! Component: 100 - total flux cleaned = 0.000422293 Jy ! Component: 150 - total flux cleaned = 0.000323149 Jy ! Component: 200 - total flux cleaned = 0.0002406 Jy ! Total flux subtracted in 200 components = 0.0002406 Jy ! Clean residual min=-0.001781 max=0.001694 Jy/beam ! Clean residual mean=0.000000 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.100808 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.100808 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.911 mas, bmaj=11.83 mas, bpa=-1.255 degrees ! Estimated noise=1.19117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.60762e-05 Jy ! Component: 100 - total flux cleaned = -3.58906e-06 Jy ! Component: 150 - total flux cleaned = -1.65244e-05 Jy ! Component: 200 - total flux cleaned = -3.9578e-05 Jy ! Total flux subtracted in 200 components = -3.9578e-05 Jy ! Clean residual min=-0.001788 max=0.002048 Jy/beam ! Clean residual mean=0.000002 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.100768 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.96082e-06 Jy ! Component: 100 - total flux cleaned = -1.93504e-05 Jy ! Component: 150 - total flux cleaned = -3.61584e-05 Jy ! Component: 200 - total flux cleaned = -5.10819e-05 Jy ! Total flux subtracted in 200 components = -5.10819e-05 Jy ! Clean residual min=-0.001779 max=0.002063 Jy/beam ! Clean residual mean=0.000002 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.100717 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.100717 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=8.418 mas, bpa=-6.716 degrees ! Estimated noise=0.991374 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.815e-05 Jy ! Component: 100 - total flux cleaned = -1.0354e-05 Jy ! Component: 150 - total flux cleaned = -4.775e-05 Jy ! Component: 200 - total flux cleaned = -5.97873e-05 Jy ! Total flux subtracted in 200 components = -5.97873e-05 Jy ! Clean residual min=-0.001744 max=0.001706 Jy/beam ! Clean residual mean=0.000000 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.100657 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.100657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059328Jy sigma=0.452482 ! Fit after self-cal, rms=0.059334Jy sigma=0.452473 wmodel J0750+1919_S_map.mod ! Writing 51 model components to file: J0750+1919_S_map.mod wobs J0750+1919_S_uvs.fits ! Writing UV FITS file: J0750+1919_S_uvs.fits wwins J0750+1919_S_map.win ! wwins: Wrote 1 windows to J0750+1919_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.75854e-05 Jy ! Component: 100 - total flux cleaned = 0.00010878 Jy ! Component: 150 - total flux cleaned = 0.000248951 Jy ! Component: 200 - total flux cleaned = 0.000384036 Jy ! Component: 250 - total flux cleaned = 0.00041008 Jy ! Component: 300 - total flux cleaned = 0.00040996 Jy ! Component: 350 - total flux cleaned = 0.000434786 Jy ! Component: 400 - total flux cleaned = 0.000506281 Jy ! Component: 450 - total flux cleaned = 0.000552813 Jy ! Component: 500 - total flux cleaned = 0.000643443 Jy ! Component: 550 - total flux cleaned = 0.000731678 Jy ! Component: 600 - total flux cleaned = 0.000796 Jy ! Component: 650 - total flux cleaned = 0.000795591 Jy ! Component: 700 - total flux cleaned = 0.00085787 Jy ! Component: 750 - total flux cleaned = 0.000939352 Jy ! Component: 800 - total flux cleaned = 0.00103923 Jy ! Component: 850 - total flux cleaned = 0.00117652 Jy ! Component: 900 - total flux cleaned = 0.00127303 Jy ! Component: 950 - total flux cleaned = 0.00136836 Jy ! Component: 1000 - total flux cleaned = 0.00155471 Jy ! Component: 1050 - total flux cleaned = 0.0017194 Jy ! Component: 1100 - total flux cleaned = 0.0017913 Jy ! Component: 1150 - total flux cleaned = 0.00189803 Jy ! Component: 1200 - total flux cleaned = 0.00205566 Jy ! Component: 1250 - total flux cleaned = 0.00221073 Jy ! Component: 1300 - total flux cleaned = 0.0023638 Jy ! Component: 1350 - total flux cleaned = 0.00256465 Jy ! Component: 1400 - total flux cleaned = 0.0027132 Jy ! Component: 1450 - total flux cleaned = 0.00287638 Jy ! Component: 1500 - total flux cleaned = 0.00302154 Jy ! Component: 1550 - total flux cleaned = 0.00322829 Jy ! Component: 1600 - total flux cleaned = 0.00336939 Jy ! Component: 1650 - total flux cleaned = 0.00352477 Jy ! Component: 1700 - total flux cleaned = 0.00366312 Jy ! Component: 1750 - total flux cleaned = 0.00382994 Jy ! Component: 1800 - total flux cleaned = 0.00397971 Jy ! Component: 1850 - total flux cleaned = 0.00412785 Jy ! Component: 1900 - total flux cleaned = 0.00426007 Jy ! Component: 1950 - total flux cleaned = 0.00439078 Jy ! Component: 2000 - total flux cleaned = 0.00453437 Jy ! Component: 2050 - total flux cleaned = 0.00464816 Jy ! Component: 2100 - total flux cleaned = 0.0048031 Jy ! Component: 2150 - total flux cleaned = 0.00494236 Jy ! Component: 2200 - total flux cleaned = 0.00506635 Jy ! Component: 2250 - total flux cleaned = 0.00518951 Jy ! Component: 2300 - total flux cleaned = 0.00531119 Jy ! Component: 2350 - total flux cleaned = 0.00537801 Jy ! Component: 2400 - total flux cleaned = 0.00549745 Jy ! Component: 2450 - total flux cleaned = 0.00562871 Jy ! Component: 2500 - total flux cleaned = 0.00568071 Jy ! Component: 2550 - total flux cleaned = 0.00573231 Jy ! Component: 2600 - total flux cleaned = 0.00582196 Jy ! Component: 2650 - total flux cleaned = 0.0059361 Jy ! Component: 2700 - total flux cleaned = 0.00594852 Jy ! Component: 2750 - total flux cleaned = 0.00602361 Jy ! Component: 2800 - total flux cleaned = 0.00606057 Jy ! Component: 2850 - total flux cleaned = 0.00613438 Jy ! Component: 2900 - total flux cleaned = 0.00619524 Jy ! Component: 2950 - total flux cleaned = 0.00623159 Jy ! Component: 3000 - total flux cleaned = 0.00631524 Jy ! Component: 3050 - total flux cleaned = 0.00630338 Jy ! Component: 3100 - total flux cleaned = 0.0063742 Jy ! Component: 3150 - total flux cleaned = 0.00639757 Jy ! Component: 3200 - total flux cleaned = 0.00645552 Jy ! Component: 3250 - total flux cleaned = 0.00644398 Jy ! Component: 3300 - total flux cleaned = 0.00647833 Jy ! Component: 3350 - total flux cleaned = 0.00652385 Jy ! Component: 3400 - total flux cleaned = 0.00651261 Jy ! Component: 3450 - total flux cleaned = 0.00656848 Jy ! Component: 3500 - total flux cleaned = 0.00657955 Jy ! Component: 3550 - total flux cleaned = 0.00657956 Jy ! Component: 3600 - total flux cleaned = 0.00656878 Jy ! Component: 3650 - total flux cleaned = 0.00665556 Jy ! Component: 3700 - total flux cleaned = 0.00662305 Jy ! Component: 3750 - total flux cleaned = 0.00664453 Jy ! Component: 3800 - total flux cleaned = 0.00667652 Jy ! Component: 3850 - total flux cleaned = 0.00666593 Jy ! Component: 3900 - total flux cleaned = 0.00666584 Jy ! Component: 3950 - total flux cleaned = 0.00665534 Jy ! Component: 4000 - total flux cleaned = 0.00665534 Jy ! Component: 4050 - total flux cleaned = 0.0066554 Jy ! Total flux subtracted in 4096 components = 0.00666568 Jy ! Clean residual min=-0.000624 max=0.000762 Jy/beam ! Clean residual mean=-0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.107323 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 339 components and 0.107323 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0750+1919_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 8.418 at -6.716 degrees (North through East) ! Clean map min=-0.0012692 max=0.10003 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0750+1919_S_map.fits wmodel /image_prod/ug002_uva//J0750+1919_S_map.mod ! Writing 339 model components to file: /image_prod/ug002_uva//J0750+1919_S_map.mod wobs /image_prod/ug002_uva//J0750+1919_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0750+1919_S_uvs.fits wwins /image_prod/ug002_uva//J0750+1919_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0750+1919_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.100028 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000186401 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.559046 0.559046 1.11809 2.23619 4.47237 8.94474 17.8895 35.779 71.5579 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.1 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 536.628 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0750+1919_S_dfm.log closed on Wed Mar 4 22:01:23 2020