! Started logfile: /image_prod/ug002_uva//J0745+1011_X_dfm.log on Wed Mar 4 21:58:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0745+1011_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0745+1011_X_uva.fits ! AN table 1: 90 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977778 visibilities/baseline/integration-bin. ! Found source: J0745+1011 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 47520 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0745+1011_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.513713Jy sigma=8.125300 ! Fit after self-cal, rms=0.489135Jy sigma=2.561125 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6819 mas, bmaj=1.58 mas, bpa=-0.5921 degrees ! Estimated noise=1.03479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.640042 Jy ! Component: 100 - total flux cleaned = 0.846694 Jy ! Total flux subtracted in 100 components = 0.846694 Jy ! Clean residual min=-0.049552 max=0.132711 Jy/beam ! Clean residual mean=-0.000074 rms=0.011841 Jy/beam ! Combined flux in latest and established models = 0.846694 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.846694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.502938Jy sigma=2.226513 ! Fit after self-cal, rms=0.502558Jy sigma=2.215222 ! Inverting map ! Added new window around map position (-0.2, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148698 Jy ! Component: 100 - total flux cleaned = 0.251877 Jy ! Total flux subtracted in 100 components = 0.251877 Jy ! Clean residual min=-0.042454 max=0.062120 Jy/beam ! Clean residual mean=-0.000056 rms=0.008637 Jy/beam ! Combined flux in latest and established models = 1.09857 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 1.09857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.375889Jy sigma=1.658667 ! Fit after self-cal, rms=0.373935Jy sigma=1.634375 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0909764 Jy ! Component: 100 - total flux cleaned = 0.161114 Jy ! Total flux subtracted in 100 components = 0.161114 Jy ! Clean residual min=-0.033123 max=0.047482 Jy/beam ! Clean residual mean=-0.000044 rms=0.006741 Jy/beam ! Combined flux in latest and established models = 1.25969 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 1.25969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.299980Jy sigma=1.319341 ! Fit after self-cal, rms=0.299101Jy sigma=1.304259 ! Inverting map ! Added new window around map position (-1, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0652548 Jy ! Component: 100 - total flux cleaned = 0.117141 Jy ! Total flux subtracted in 100 components = 0.117141 Jy ! Clean residual min=-0.027248 max=0.032222 Jy/beam ! Clean residual mean=-0.000035 rms=0.005498 Jy/beam ! Combined flux in latest and established models = 1.37683 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 53 components and 1.37683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.249049Jy sigma=1.094942 ! Fit after self-cal, rms=0.248558Jy sigma=1.085228 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047882 Jy ! Component: 100 - total flux cleaned = 0.0869098 Jy ! Total flux subtracted in 100 components = 0.0869098 Jy ! Clean residual min=-0.022886 max=0.031094 Jy/beam ! Clean residual mean=-0.000029 rms=0.004710 Jy/beam ! Combined flux in latest and established models = 1.46374 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 68 components and 1.46374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.214129Jy sigma=0.946083 ! Fit after self-cal, rms=0.213922Jy sigma=0.940870 ! Inverting map ! Added new window around map position (1, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0384016 Jy ! Component: 100 - total flux cleaned = 0.070285 Jy ! Total flux subtracted in 100 components = 0.070285 Jy ! Clean residual min=-0.020210 max=0.026270 Jy/beam ! Clean residual mean=-0.000024 rms=0.004135 Jy/beam ! Combined flux in latest and established models = 1.53402 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 1.53402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.187745Jy sigma=0.836167 ! Fit after self-cal, rms=0.187677Jy sigma=0.832784 ! Inverting map ! Added new window around map position (-2, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314032 Jy ! Component: 100 - total flux cleaned = 0.0579037 Jy ! Total flux subtracted in 100 components = 0.0579037 Jy ! Clean residual min=-0.018719 max=0.020560 Jy/beam ! Clean residual mean=-0.000020 rms=0.003705 Jy/beam ! Combined flux in latest and established models = 1.59192 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 93 components and 1.59192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168607Jy sigma=0.758145 ! Fit after self-cal, rms=0.168613Jy sigma=0.756137 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8363 mas, bmaj=1.801 mas, bpa=1.225 degrees ! Estimated noise=0.579854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0534843 Jy ! Component: 100 - total flux cleaned = 0.0949258 Jy ! Component: 150 - total flux cleaned = 0.128891 Jy ! Component: 200 - total flux cleaned = 0.157156 Jy ! Total flux subtracted in 200 components = 0.157156 Jy ! Clean residual min=-0.020735 max=0.021564 Jy/beam ! Clean residual mean=-0.000034 rms=0.004664 Jy/beam ! Combined flux in latest and established models = 1.74908 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 125 components and 1.74908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125406Jy sigma=0.604873 ! Fit after self-cal, rms=0.125141Jy sigma=0.599996 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8363 x 1.801 at 1.225 degrees (North through East) ! Clean map min=-0.018864 max=0.87648 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.01 ! LA 0.99 MK 1.02 NL 1.07 OV 0.89 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.00 KP 1.02 ! LA 0.98 MK 1.03 NL 1.08 OV 0.91 ! PT 0.87 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 1.02 ! LA 1.00 MK 1.03 NL 1.08 OV 0.91 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.00 KP 1.00 ! LA 1.00 MK 1.02 NL 1.08 OV 0.91 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.99 KP 1.02 ! LA 0.99 MK 1.01 NL 1.09 OV 0.92 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 1.02 ! LA 1.00 MK 1.03 NL 1.08 OV 0.85 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.01 KP 1.00 ! LA 0.99 MK 1.04 NL 1.08 OV 0.91 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.99 KP 1.03 ! LA 1.00 MK 1.05 NL 1.08 OV 0.90 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.99 KP 1.01 ! LA 1.00 MK 1.04 NL 1.10 OV 0.92 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00 KP 1.01 ! LA 1.00 MK 1.05 NL 1.08 OV 0.92 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.00 KP 1.03 ! LA 0.99 MK 1.04 NL 1.08 OV 0.91 ! PT 0.89 SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.00 KP 1.03 ! LA 1.02 MK 1.03 NL 1.09 OV 0.93 ! PT 0.88 SC 1.04 ! ! ! Fit before self-cal, rms=0.125141Jy sigma=0.599996 ! Fit after self-cal, rms=0.065993Jy sigma=0.384692 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8454 mas, bmaj=1.822 mas, bpa=1.385 degrees ! Estimated noise=0.575793 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00935069 Jy ! Component: 100 - total flux cleaned = 0.0116254 Jy ! Component: 150 - total flux cleaned = 0.0116495 Jy ! Component: 200 - total flux cleaned = 0.0116643 Jy ! Total flux subtracted in 200 components = 0.0116643 Jy ! Clean residual min=-0.007817 max=0.006720 Jy/beam ! Clean residual mean=-0.000006 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 1.76074 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 143 components and 1.76074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062224Jy sigma=0.362718 ! Fit after self-cal, rms=0.062090Jy sigma=0.361608 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062090Jy sigma=0.361608 ! Fit after self-cal, rms=0.060073Jy sigma=0.350579 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8443 mas, bmaj=1.816 mas, bpa=1.369 degrees ! Estimated noise=0.574168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108963 Jy ! Component: 100 - total flux cleaned = 0.0011192 Jy ! Component: 150 - total flux cleaned = 0.00128708 Jy ! Component: 200 - total flux cleaned = 0.00159029 Jy ! Total flux subtracted in 200 components = 0.00159029 Jy ! Clean residual min=-0.005705 max=0.006597 Jy/beam ! Clean residual mean=-0.000007 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 1.76233 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 149 components and 1.76233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058657Jy sigma=0.342668 ! Fit after self-cal, rms=0.058624Jy sigma=0.341929 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00538378 Jy ! Component: 100 - total flux cleaned = 0.00783286 Jy ! Component: 150 - total flux cleaned = 0.00909529 Jy ! Component: 200 - total flux cleaned = 0.00995474 Jy ! Total flux subtracted in 200 components = 0.00995474 Jy ! Clean residual min=-0.005155 max=0.005949 Jy/beam ! Clean residual mean=-0.000005 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 1.77229 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 161 components and 1.77229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057415Jy sigma=0.336255 ! Fit after self-cal, rms=0.057398Jy sigma=0.335854 ! Inverting map ! Added new window around map position (-0.8, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563268 Jy ! Component: 100 - total flux cleaned = 0.00841717 Jy ! Component: 150 - total flux cleaned = 0.010441 Jy ! Component: 200 - total flux cleaned = 0.0117542 Jy ! Total flux subtracted in 200 components = 0.0117542 Jy ! Clean residual min=-0.004392 max=0.004603 Jy/beam ! Clean residual mean=-0.000005 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 1.78404 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 176 components and 1.78404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056392Jy sigma=0.331480 ! Fit after self-cal, rms=0.056374Jy sigma=0.331345 ! Inverting map ! Added new window around map position (4.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371425 Jy ! Component: 100 - total flux cleaned = 0.00530579 Jy ! Component: 150 - total flux cleaned = 0.00637904 Jy ! Component: 200 - total flux cleaned = 0.00704635 Jy ! Total flux subtracted in 200 components = 0.00704635 Jy ! Clean residual min=-0.003989 max=0.004331 Jy/beam ! Clean residual mean=-0.000004 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 1.79109 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 190 components and 1.79109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055719Jy sigma=0.328375 ! Fit after self-cal, rms=0.055694Jy sigma=0.328236 ! Inverting map ! Added new window around map position (10.4, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290161 Jy ! Component: 100 - total flux cleaned = 0.00455838 Jy ! Component: 150 - total flux cleaned = 0.00563433 Jy ! Component: 200 - total flux cleaned = 0.00613689 Jy ! Total flux subtracted in 200 components = 0.00613689 Jy ! Clean residual min=-0.003628 max=0.003564 Jy/beam ! Clean residual mean=-0.000002 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 1.79723 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 206 components and 1.79723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055174Jy sigma=0.325808 ! Fit after self-cal, rms=0.055164Jy sigma=0.325700 ! Inverting map ! Added new window around map position (7, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367654 Jy ! Component: 100 - total flux cleaned = 0.00498256 Jy ! Component: 150 - total flux cleaned = 0.00557108 Jy ! Component: 200 - total flux cleaned = 0.00593439 Jy ! Total flux subtracted in 200 components = 0.00593439 Jy ! Clean residual min=-0.003353 max=0.003175 Jy/beam ! Clean residual mean=-0.000001 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 1.80316 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 227 components and 1.80316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054704Jy sigma=0.323746 ! Fit after self-cal, rms=0.054702Jy sigma=0.323678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054702Jy sigma=0.323678 ! Fit after self-cal, rms=0.054347Jy sigma=0.322367 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8443 mas, bmaj=1.815 mas, bpa=1.368 degrees ! Estimated noise=0.573793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000589308 Jy ! Component: 100 - total flux cleaned = 0.000411605 Jy ! Component: 150 - total flux cleaned = 0.00158285 Jy ! Component: 200 - total flux cleaned = 0.00266744 Jy ! Total flux subtracted in 200 components = 0.00266744 Jy ! Clean residual min=-0.003052 max=0.002935 Jy/beam ! Clean residual mean=-0.000002 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 1.80583 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 239 components and 1.80583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054006Jy sigma=0.320526 ! Fit after self-cal, rms=0.054008Jy sigma=0.320473 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227904 Jy ! Component: 100 - total flux cleaned = 0.0032567 Jy ! Component: 150 - total flux cleaned = 0.00415241 Jy ! Component: 200 - total flux cleaned = 0.00478795 Jy ! Total flux subtracted in 200 components = 0.00478795 Jy ! Clean residual min=-0.002756 max=0.002370 Jy/beam ! Clean residual mean=-0.000002 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 1.81062 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 254 components and 1.81062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053752Jy sigma=0.319210 ! Fit after self-cal, rms=0.053755Jy sigma=0.319156 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053755Jy sigma=0.319156 ! Fit after self-cal, rms=0.053668Jy sigma=0.318888 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.971 mas, bmaj=2.616 mas, bpa=1.207 degrees ! Estimated noise=0.849478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134697 Jy ! Component: 100 - total flux cleaned = 0.00313669 Jy ! Component: 150 - total flux cleaned = 0.00469955 Jy ! Component: 200 - total flux cleaned = 0.00574978 Jy ! Total flux subtracted in 200 components = 0.00574978 Jy ! Clean residual min=-0.003006 max=0.002767 Jy/beam ! Clean residual mean=-0.000004 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 1.81637 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 287 components and 1.81637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053519Jy sigma=0.318348 ! Fit after self-cal, rms=0.053522Jy sigma=0.318249 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.22941e-05 Jy ! Component: 100 - total flux cleaned = 0.000863287 Jy ! Component: 150 - total flux cleaned = 0.00126465 Jy ! Component: 200 - total flux cleaned = 0.00173401 Jy ! Total flux subtracted in 200 components = 0.00173401 Jy ! Clean residual min=-0.002784 max=0.002626 Jy/beam ! Clean residual mean=-0.000003 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 1.8181 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 304 components and 1.8181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053474Jy sigma=0.318173 ! Fit after self-cal, rms=0.053475Jy sigma=0.318125 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8442 mas, bmaj=1.815 mas, bpa=1.373 degrees ! Estimated noise=0.573702 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8442 x 1.815 at 1.373 degrees (North through East) ! Clean map min=-0.0023843 max=0.86254 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053475Jy sigma=0.318125 ! Fit after self-cal, rms=0.050924Jy sigma=0.295466 ! Inverting map and beam ! Estimated beam: bmin=0.8443 mas, bmaj=1.815 mas, bpa=1.369 degrees ! Estimated noise=0.573747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215688 Jy ! Component: 100 - total flux cleaned = 0.00012946 Jy ! Component: 150 - total flux cleaned = 0.000505914 Jy ! Component: 200 - total flux cleaned = 0.00074083 Jy ! Total flux subtracted in 200 components = 0.00074083 Jy ! Clean residual min=-0.002329 max=0.002048 Jy/beam ! Clean residual mean=-0.000001 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 1.81884 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 316 components and 1.81884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050770Jy sigma=0.294497 ! Fit after self-cal, rms=0.050765Jy sigma=0.294463 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.49886e-05 Jy ! Component: 100 - total flux cleaned = 0.000335235 Jy ! Component: 150 - total flux cleaned = 0.000488453 Jy ! Component: 200 - total flux cleaned = 0.000733051 Jy ! Total flux subtracted in 200 components = 0.000733051 Jy ! Clean residual min=-0.002222 max=0.001951 Jy/beam ! Clean residual mean=-0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 1.81957 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 325 components and 1.81957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050670Jy sigma=0.293902 ! Fit after self-cal, rms=0.050670Jy sigma=0.293873 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050670Jy sigma=0.293873 ! Fit after self-cal, rms=0.050647Jy sigma=0.293794 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6868 mas, bmaj=1.586 mas, bpa=-0.4114 degrees ! Estimated noise=1.03451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.641252 Jy ! Component: 100 - total flux cleaned = 0.88247 Jy ! Component: 150 - total flux cleaned = 1.03165 Jy ! Component: 200 - total flux cleaned = 1.13981 Jy ! Total flux subtracted in 200 components = 1.13981 Jy ! Clean residual min=-0.031024 max=0.062296 Jy/beam ! Clean residual mean=-0.000048 rms=0.006815 Jy/beam ! Combined flux in latest and established models = 1.13981 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 1.13981 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8444 mas, bmaj=1.816 mas, bpa=1.368 degrees ! Estimated noise=0.573774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151766 Jy ! Component: 100 - total flux cleaned = 0.256267 Jy ! Component: 150 - total flux cleaned = 0.333278 Jy ! Component: 200 - total flux cleaned = 0.39118 Jy ! Total flux subtracted in 200 components = 0.39118 Jy ! Clean residual min=-0.014271 max=0.033671 Jy/beam ! Clean residual mean=-0.000054 rms=0.004534 Jy/beam ! Combined flux in latest and established models = 1.53099 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 69 components and 1.53099 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445106 Jy ! Component: 100 - total flux cleaned = 0.0796662 Jy ! Component: 150 - total flux cleaned = 0.107625 Jy ! Component: 200 - total flux cleaned = 0.13003 Jy ! Total flux subtracted in 200 components = 0.13003 Jy ! Clean residual min=-0.007489 max=0.013368 Jy/beam ! Clean residual mean=-0.000028 rms=0.002142 Jy/beam ! Combined flux in latest and established models = 1.66102 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 105 components and 1.66102 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182587 Jy ! Component: 100 - total flux cleaned = 0.0333322 Jy ! Component: 150 - total flux cleaned = 0.0460082 Jy ! Component: 200 - total flux cleaned = 0.0567489 Jy ! Total flux subtracted in 200 components = 0.0567489 Jy ! Clean residual min=-0.005405 max=0.006599 Jy/beam ! Clean residual mean=-0.000017 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 1.71777 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 132 components and 1.71777 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00915758 Jy ! Component: 100 - total flux cleaned = 0.0169961 Jy ! Component: 150 - total flux cleaned = 0.0238046 Jy ! Component: 200 - total flux cleaned = 0.0298094 Jy ! Total flux subtracted in 200 components = 0.0298094 Jy ! Clean residual min=-0.004417 max=0.004124 Jy/beam ! Clean residual mean=-0.000012 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 1.74758 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 148 components and 1.74758 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.972 mas, bmaj=2.616 mas, bpa=1.274 degrees ! Estimated noise=0.849355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102512 Jy ! Component: 100 - total flux cleaned = 0.0182341 Jy ! Component: 150 - total flux cleaned = 0.024905 Jy ! Component: 200 - total flux cleaned = 0.0305955 Jy ! Total flux subtracted in 200 components = 0.0305955 Jy ! Clean residual min=-0.003577 max=0.004023 Jy/beam ! Clean residual mean=-0.000018 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 1.77817 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496451 Jy ! Component: 100 - total flux cleaned = 0.00935395 Jy ! Component: 150 - total flux cleaned = 0.013263 Jy ! Component: 200 - total flux cleaned = 0.0167634 Jy ! Total flux subtracted in 200 components = 0.0167634 Jy ! Clean residual min=-0.002884 max=0.003067 Jy/beam ! Clean residual mean=-0.000012 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 1.79494 Jy ! Adding 150 model components to the UV plane model. ! The established model now contains 275 components and 1.79494 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8444 mas, bmaj=1.816 mas, bpa=1.368 degrees ! Estimated noise=0.573774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104552 Jy ! Component: 100 - total flux cleaned = 0.00143673 Jy ! Component: 150 - total flux cleaned = 0.00323749 Jy ! Component: 200 - total flux cleaned = 0.00499678 Jy ! Total flux subtracted in 200 components = 0.00499678 Jy ! Clean residual min=-0.002647 max=0.002967 Jy/beam ! Clean residual mean=-0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 1.79993 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 299 components and 1.79993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051500Jy sigma=0.298898 ! Fit after self-cal, rms=0.051313Jy sigma=0.297041 wmodel J0745+1011_X_map.mod ! Writing 299 model components to file: J0745+1011_X_map.mod wobs J0745+1011_X_uvs.fits ! Writing UV FITS file: J0745+1011_X_uvs.fits wwins J0745+1011_X_map.win ! wwins: Wrote 11 windows to J0745+1011_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940657 Jy ! Component: 100 - total flux cleaned = 0.00150463 Jy ! Component: 150 - total flux cleaned = 0.00183572 Jy ! Component: 200 - total flux cleaned = 0.00231303 Jy ! Component: 250 - total flux cleaned = 0.00265851 Jy ! Component: 300 - total flux cleaned = 0.00277084 Jy ! Component: 350 - total flux cleaned = 0.00280722 Jy ! Component: 400 - total flux cleaned = 0.00273735 Jy ! Component: 450 - total flux cleaned = 0.00273782 Jy ! Component: 500 - total flux cleaned = 0.0028046 Jy ! Component: 550 - total flux cleaned = 0.00270365 Jy ! Component: 600 - total flux cleaned = 0.00273655 Jy ! Component: 650 - total flux cleaned = 0.00263983 Jy ! Component: 700 - total flux cleaned = 0.00270313 Jy ! Component: 750 - total flux cleaned = 0.00260922 Jy ! Component: 800 - total flux cleaned = 0.00257822 Jy ! Component: 850 - total flux cleaned = 0.00251762 Jy ! Component: 900 - total flux cleaned = 0.0024582 Jy ! Component: 950 - total flux cleaned = 0.00239917 Jy ! Component: 1000 - total flux cleaned = 0.00228396 Jy ! Component: 1050 - total flux cleaned = 0.0022838 Jy ! Component: 1100 - total flux cleaned = 0.00225506 Jy ! Component: 1150 - total flux cleaned = 0.00217179 Jy ! Component: 1200 - total flux cleaned = 0.00217124 Jy ! Component: 1250 - total flux cleaned = 0.00206282 Jy ! Component: 1300 - total flux cleaned = 0.00195638 Jy ! Component: 1350 - total flux cleaned = 0.00193006 Jy ! Component: 1400 - total flux cleaned = 0.00185207 Jy ! Component: 1450 - total flux cleaned = 0.00182605 Jy ! Component: 1500 - total flux cleaned = 0.00180073 Jy ! Component: 1550 - total flux cleaned = 0.00185043 Jy ! Component: 1600 - total flux cleaned = 0.00182553 Jy ! Component: 1650 - total flux cleaned = 0.00182552 Jy ! Component: 1700 - total flux cleaned = 0.0018493 Jy ! Component: 1750 - total flux cleaned = 0.00182562 Jy ! Component: 1800 - total flux cleaned = 0.00191993 Jy ! Component: 1850 - total flux cleaned = 0.00198976 Jy ! Component: 1900 - total flux cleaned = 0.00201275 Jy ! Component: 1950 - total flux cleaned = 0.0020809 Jy ! Component: 2000 - total flux cleaned = 0.0021033 Jy ! Component: 2050 - total flux cleaned = 0.00210313 Jy ! Component: 2100 - total flux cleaned = 0.00223551 Jy ! Component: 2150 - total flux cleaned = 0.00221376 Jy ! Component: 2200 - total flux cleaned = 0.00232152 Jy ! Component: 2250 - total flux cleaned = 0.00238541 Jy ! Component: 2300 - total flux cleaned = 0.00244833 Jy ! Component: 2350 - total flux cleaned = 0.00253167 Jy ! Component: 2400 - total flux cleaned = 0.00249026 Jy ! Component: 2450 - total flux cleaned = 0.00253053 Jy ! Component: 2500 - total flux cleaned = 0.00247014 Jy ! Component: 2550 - total flux cleaned = 0.00253061 Jy ! Component: 2600 - total flux cleaned = 0.00258976 Jy ! Component: 2650 - total flux cleaned = 0.00262896 Jy ! Component: 2700 - total flux cleaned = 0.00260933 Jy ! Component: 2750 - total flux cleaned = 0.00262881 Jy ! Component: 2800 - total flux cleaned = 0.00264745 Jy ! Component: 2850 - total flux cleaned = 0.00259079 Jy ! Component: 2900 - total flux cleaned = 0.00268438 Jy ! Component: 2950 - total flux cleaned = 0.00262893 Jy ! Component: 3000 - total flux cleaned = 0.00264743 Jy ! Component: 3050 - total flux cleaned = 0.00270189 Jy ! Component: 3100 - total flux cleaned = 0.00275555 Jy ! Component: 3150 - total flux cleaned = 0.0027733 Jy ! Component: 3200 - total flux cleaned = 0.00280841 Jy ! Component: 3250 - total flux cleaned = 0.00279129 Jy ! Component: 3300 - total flux cleaned = 0.00284299 Jy ! Component: 3350 - total flux cleaned = 0.00284323 Jy ! Component: 3400 - total flux cleaned = 0.00287709 Jy ! Component: 3450 - total flux cleaned = 0.00287692 Jy ! Component: 3500 - total flux cleaned = 0.00287704 Jy ! Component: 3550 - total flux cleaned = 0.00304217 Jy ! Component: 3600 - total flux cleaned = 0.00304211 Jy ! Component: 3650 - total flux cleaned = 0.00307442 Jy ! Component: 3700 - total flux cleaned = 0.00312286 Jy ! Component: 3750 - total flux cleaned = 0.00315469 Jy ! Component: 3800 - total flux cleaned = 0.00313897 Jy ! Component: 3850 - total flux cleaned = 0.00317047 Jy ! Component: 3900 - total flux cleaned = 0.00323275 Jy ! Component: 3950 - total flux cleaned = 0.00324825 Jy ! Component: 4000 - total flux cleaned = 0.00337052 Jy ! Component: 4050 - total flux cleaned = 0.00340082 Jy ! Total flux subtracted in 4096 components = 0.00338562 Jy ! Clean residual min=-0.000751 max=0.000786 Jy/beam ! Clean residual mean=-0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 1.80332 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 591 components and 1.80332 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0745+1011_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8444 x 1.816 at 1.368 degrees (North through East) ! Clean map min=-0.0016772 max=0.86035 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0745+1011_X_map.fits wmodel /image_prod/ug002_uva//J0745+1011_X_map.mod ! Writing 591 model components to file: /image_prod/ug002_uva//J0745+1011_X_map.mod wobs /image_prod/ug002_uva//J0745+1011_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0745+1011_X_uvs.fits wwins /image_prod/ug002_uva//J0745+1011_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J0745+1011_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.860348 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000249424 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0869732 0.0869732 0.173946 0.347893 0.695786 1.39157 2.78314 5.56629 11.1326 22.2652 44.5303 89.0606 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.86 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3449.34 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0745+1011_X_dfm.log closed on Wed Mar 4 21:58:40 2020