! Started logfile: /image_prod/ug002_uva//J0743-3803_S_dfm.log on Wed Mar  4 21:57:27 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0743-3803_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0743-3803_S_uva.fits
! AN table 1: 38 integrations on 21 of 21 possible baselines.
! AN table 2: 37 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.987302 visibilities/baseline/integration-bin.
! Found source: J0743-3803
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4665 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0743-3803_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.041481Jy  sigma=5.732730
! Fit after  self-cal, rms=0.827152Jy  sigma=4.306002
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.11 mas, bmaj=39.64 mas, bpa=0.02031 degrees
! Estimated noise=3.61477 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.154449 Jy
! Component: 100  -  total flux cleaned = 0.21273 Jy
! Total flux subtracted in 100 components = 0.21273 Jy
! Clean residual min=-0.015882 max=0.025860 Jy/beam
! Clean residual mean=0.000102 rms=0.005781 Jy/beam
! Combined flux in latest and established models = 0.212731 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 0.212731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106843Jy  sigma=0.530704
! Fit after  self-cal, rms=0.105771Jy  sigma=0.527950
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.101 mas, bmaj=40.78 mas, bpa=0.8252 degrees
! Estimated noise=1.97697 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0303144 Jy
! Component: 100  -  total flux cleaned = 0.0460071 Jy
! Component: 150  -  total flux cleaned = 0.0548521 Jy
! Component: 200  -  total flux cleaned = 0.0603996 Jy
! Total flux subtracted in 200 components = 0.0603996 Jy
! Clean residual min=-0.007333 max=0.007381 Jy/beam
! Clean residual mean=0.000057 rms=0.002494 Jy/beam
! Combined flux in latest and established models = 0.27313 Jy
! Performing phase self-cal
! Adding 134 model components to the UV plane model.
! The established model now contains 174 components and 0.27313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099546Jy  sigma=0.463083
! Fit after  self-cal, rms=0.099026Jy  sigma=0.462468
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.101 x 40.78 at 0.8252 degrees (North through East)
! Clean map  min=-0.0075645  max=0.18949 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.07     KP        0.96     LA        0.98     
!   NL        1.07     OV        1.03     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.18     FD        0.90     KP        0.94     LA        0.97     
!   NL        1.30     OV        0.96     PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.04     KP        0.96     LA        1.01     
!   NL        1.12     OV        1.01     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        2.16     FD        0.89     KP        0.98     LA        1.03     
!   NL        1.35     OV        0.95     PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        0.94     KP        0.96     LA        1.02     
!   NL        1.04     OV        1.01     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.30     FD        0.87     KP        0.96     LA        1.01     
!   NL        1.23     OV        0.90     PT        0.95     
! 
! 
! Fit before self-cal, rms=0.099026Jy  sigma=0.462468
! Fit after  self-cal, rms=0.122058Jy  sigma=0.441223
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.209 mas, bmaj=42.5 mas, bpa=0.3979 degrees
! Estimated noise=2.0093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000598568 Jy
! Component: 100  -  total flux cleaned = -0.000527215 Jy
! Component: 150  -  total flux cleaned = -0.000530333 Jy
! Component: 200  -  total flux cleaned = -0.000471376 Jy
! Total flux subtracted in 200 components = -0.000471376 Jy
! Clean residual min=-0.002815 max=0.003738 Jy/beam
! Clean residual mean=0.000008 rms=0.000840 Jy/beam
! Combined flux in latest and established models = 0.272659 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 201 components and 0.272659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.121922Jy  sigma=0.440888
! Fit after  self-cal, rms=0.122213Jy  sigma=0.440678
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122213Jy  sigma=0.440678
! Fit after  self-cal, rms=0.123087Jy  sigma=0.440652
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.205 mas, bmaj=42.59 mas, bpa=0.3652 degrees
! Estimated noise=2.00655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000594273 Jy
! Component: 100  -  total flux cleaned = -0.000594157 Jy
! Component: 150  -  total flux cleaned = -0.000543292 Jy
! Component: 200  -  total flux cleaned = -0.000542363 Jy
! Total flux subtracted in 200 components = -0.000542363 Jy
! Clean residual min=-0.002557 max=0.003501 Jy/beam
! Clean residual mean=0.000007 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.272117 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 212 components and 0.272117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123002Jy  sigma=0.440472
! Fit after  self-cal, rms=0.123003Jy  sigma=0.440453
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13, -7.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0029193 Jy
! Component: 100  -  total flux cleaned = 0.00338814 Jy
! Component: 150  -  total flux cleaned = 0.00338656 Jy
! Component: 200  -  total flux cleaned = 0.00333219 Jy
! Total flux subtracted in 200 components = 0.00333219 Jy
! Clean residual min=-0.002155 max=0.002458 Jy/beam
! Clean residual mean=0.000021 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.275449 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 236 components and 0.275449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122878Jy  sigma=0.439892
! Fit after  self-cal, rms=0.122838Jy  sigma=0.439838
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122838Jy  sigma=0.439838
! Fit after  self-cal, rms=0.122891Jy  sigma=0.439769
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.203 mas, bmaj=42.6 mas, bpa=0.3353 degrees
! Estimated noise=2.00078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00086145 Jy
! Component: 100  -  total flux cleaned = 0.000815071 Jy
! Component: 150  -  total flux cleaned = 0.00072327 Jy
! Component: 200  -  total flux cleaned = 0.0005935 Jy
! Total flux subtracted in 200 components = 0.0005935 Jy
! Clean residual min=-0.002043 max=0.002110 Jy/beam
! Clean residual mean=0.000014 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.276042 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 262 components and 0.276042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122829Jy  sigma=0.439541
! Fit after  self-cal, rms=0.122777Jy  sigma=0.439518
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.34859e-05 Jy
! Component: 100  -  total flux cleaned = -6.71275e-05 Jy
! Component: 150  -  total flux cleaned = -0.000146961 Jy
! Component: 200  -  total flux cleaned = -0.000184036 Jy
! Total flux subtracted in 200 components = -0.000184036 Jy
! Clean residual min=-0.001940 max=0.001929 Jy/beam
! Clean residual mean=0.000013 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.275858 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 275 components and 0.275858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122739Jy  sigma=0.439383
! Fit after  self-cal, rms=0.122714Jy  sigma=0.439372
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122714Jy  sigma=0.439372
! Fit after  self-cal, rms=0.122668Jy  sigma=0.439341
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.815 mas, bmaj=45.76 mas, bpa=2.309 degrees
! Estimated noise=1.97553 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00024531 Jy
! Component: 100  -  total flux cleaned = -0.000416959 Jy
! Component: 150  -  total flux cleaned = -0.000443314 Jy
! Component: 200  -  total flux cleaned = -0.00044385 Jy
! Total flux subtracted in 200 components = -0.00044385 Jy
! Clean residual min=-0.001613 max=0.001680 Jy/beam
! Clean residual mean=0.000015 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.275414 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 292 components and 0.275414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122645Jy  sigma=0.439264
! Fit after  self-cal, rms=0.122631Jy  sigma=0.439259
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.4849e-05 Jy
! Component: 100  -  total flux cleaned = -3.25115e-05 Jy
! Component: 150  -  total flux cleaned = -1.22105e-05 Jy
! Component: 200  -  total flux cleaned = -4.93065e-05 Jy
! Total flux subtracted in 200 components = -4.93065e-05 Jy
! Clean residual min=-0.001522 max=0.001622 Jy/beam
! Clean residual mean=0.000015 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.275365 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 311 components and 0.275365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122617Jy  sigma=0.439224
! Fit after  self-cal, rms=0.122607Jy  sigma=0.439221
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.192 mas, bmaj=42.61 mas, bpa=0.3104 degrees
! Estimated noise=1.99536 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.192 x 42.61 at 0.3104 degrees (North through East)
! Clean map  min=-0.0023029  max=0.1911 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.123 mas, bmaj=41.81 mas, bpa=-0.4727 degrees
! Estimated noise=3.65219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.156102 Jy
! Component: 100  -  total flux cleaned = 0.21348 Jy
! Component: 150  -  total flux cleaned = 0.239113 Jy
! Component: 200  -  total flux cleaned = 0.252896 Jy
! Total flux subtracted in 200 components = 0.252896 Jy
! Clean residual min=-0.007103 max=0.008285 Jy/beam
! Clean residual mean=0.000004 rms=0.002386 Jy/beam
! Combined flux in latest and established models = 0.252896 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 104 model components to the UV plane model.
! The established model now contains 104 components and 0.252896 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.192 mas, bmaj=42.61 mas, bpa=0.3104 degrees
! Estimated noise=1.99536 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00890954 Jy
! Component: 100  -  total flux cleaned = 0.0137828 Jy
! Component: 150  -  total flux cleaned = 0.0171628 Jy
! Component: 200  -  total flux cleaned = 0.0185945 Jy
! Total flux subtracted in 200 components = 0.0185945 Jy
! Clean residual min=-0.002308 max=0.002566 Jy/beam
! Clean residual mean=0.000006 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.27149 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 178 components and 0.27149 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.815 mas, bmaj=45.76 mas, bpa=2.309 degrees
! Estimated noise=1.97553 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120726 Jy
! Component: 100  -  total flux cleaned = 0.0018685 Jy
! Component: 150  -  total flux cleaned = 0.00236381 Jy
! Component: 200  -  total flux cleaned = 0.00266415 Jy
! Total flux subtracted in 200 components = 0.00266415 Jy
! Clean residual min=-0.001872 max=0.001815 Jy/beam
! Clean residual mean=0.000013 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.274155 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000163201 Jy
! Component: 100  -  total flux cleaned = 0.000192391 Jy
! Component: 150  -  total flux cleaned = 0.000245797 Jy
! Component: 200  -  total flux cleaned = 0.000269919 Jy
! Total flux subtracted in 200 components = 0.000269919 Jy
! Clean residual min=-0.001787 max=0.001685 Jy/beam
! Clean residual mean=0.000013 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.274424 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 248 components and 0.274424 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.192 mas, bmaj=42.61 mas, bpa=0.3104 degrees
! Estimated noise=1.99536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000136348 Jy
! Component: 100  -  total flux cleaned = -8.28904e-05 Jy
! Component: 150  -  total flux cleaned = -8.2113e-05 Jy
! Component: 200  -  total flux cleaned = 4.94856e-06 Jy
! Total flux subtracted in 200 components = 4.94856e-06 Jy
! Clean residual min=-0.002011 max=0.001825 Jy/beam
! Clean residual mean=0.000011 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.274429 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 284 components and 0.274429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122627Jy  sigma=0.439398
! Fit after  self-cal, rms=0.122574Jy  sigma=0.439299
wmodel J0743-3803_S_map.mod
! Writing 284 model components to file: J0743-3803_S_map.mod
wobs   J0743-3803_S_uvs.fits
! Writing UV FITS file: J0743-3803_S_uvs.fits
wwins  J0743-3803_S_map.win
! wwins: Wrote 2 windows to J0743-3803_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000446648 Jy
! Component: 100  -  total flux cleaned = -0.000594201 Jy
! Component: 150  -  total flux cleaned = -0.000511808 Jy
! Component: 200  -  total flux cleaned = -0.000329603 Jy
! Component: 250  -  total flux cleaned = -3.34763e-05 Jy
! Component: 300  -  total flux cleaned = 0.000203733 Jy
! Component: 350  -  total flux cleaned = 0.000501138 Jy
! Component: 400  -  total flux cleaned = 0.00074585 Jy
! Component: 450  -  total flux cleaned = 0.00100486 Jy
! Component: 500  -  total flux cleaned = 0.001195 Jy
! Component: 550  -  total flux cleaned = 0.00140116 Jy
! Component: 600  -  total flux cleaned = 0.00150187 Jy
! Component: 650  -  total flux cleaned = 0.00162007 Jy
! Component: 700  -  total flux cleaned = 0.00165928 Jy
! Component: 750  -  total flux cleaned = 0.00175373 Jy
! Component: 800  -  total flux cleaned = 0.00180942 Jy
! Component: 850  -  total flux cleaned = 0.00188231 Jy
! Component: 900  -  total flux cleaned = 0.00193591 Jy
! Component: 950  -  total flux cleaned = 0.00204149 Jy
! Component: 1000  -  total flux cleaned = 0.00212797 Jy
! Component: 1050  -  total flux cleaned = 0.00221345 Jy
! Component: 1100  -  total flux cleaned = 0.00233174 Jy
! Component: 1150  -  total flux cleaned = 0.00238182 Jy
! Component: 1200  -  total flux cleaned = 0.0024804 Jy
! Component: 1250  -  total flux cleaned = 0.00257738 Jy
! Component: 1300  -  total flux cleaned = 0.00259326 Jy
! Component: 1350  -  total flux cleaned = 0.00264071 Jy
! Component: 1400  -  total flux cleaned = 0.00270332 Jy
! Component: 1450  -  total flux cleaned = 0.00276471 Jy
! Component: 1500  -  total flux cleaned = 0.00278015 Jy
! Component: 1550  -  total flux cleaned = 0.00287023 Jy
! Component: 1600  -  total flux cleaned = 0.00289997 Jy
! Component: 1650  -  total flux cleaned = 0.0029731 Jy
! Component: 1700  -  total flux cleaned = 0.00297307 Jy
! Component: 1750  -  total flux cleaned = 0.00301591 Jy
! Component: 1800  -  total flux cleaned = 0.00298754 Jy
! Component: 1850  -  total flux cleaned = 0.00297374 Jy
! Component: 1900  -  total flux cleaned = 0.00301531 Jy
! Component: 1950  -  total flux cleaned = 0.00297433 Jy
! Component: 2000  -  total flux cleaned = 0.00296083 Jy
! Component: 2050  -  total flux cleaned = 0.00298776 Jy
! Component: 2100  -  total flux cleaned = 0.00300098 Jy
! Component: 2150  -  total flux cleaned = 0.00297457 Jy
! Component: 2200  -  total flux cleaned = 0.0029485 Jy
! Component: 2250  -  total flux cleaned = 0.00293554 Jy
! Component: 2300  -  total flux cleaned = 0.00290986 Jy
! Component: 2350  -  total flux cleaned = 0.00288441 Jy
! Component: 2400  -  total flux cleaned = 0.00284641 Jy
! Component: 2450  -  total flux cleaned = 0.00280872 Jy
! Component: 2500  -  total flux cleaned = 0.00279622 Jy
! Component: 2550  -  total flux cleaned = 0.00275894 Jy
! Component: 2600  -  total flux cleaned = 0.00272199 Jy
! Component: 2650  -  total flux cleaned = 0.0027097 Jy
! Component: 2700  -  total flux cleaned = 0.00267324 Jy
! Component: 2750  -  total flux cleaned = 0.00266123 Jy
! Component: 2800  -  total flux cleaned = 0.00263733 Jy
! Component: 2850  -  total flux cleaned = 0.00264925 Jy
! Component: 2900  -  total flux cleaned = 0.00261391 Jy
! Component: 2950  -  total flux cleaned = 0.00259056 Jy
! Component: 3000  -  total flux cleaned = 0.00259063 Jy
! Component: 3050  -  total flux cleaned = 0.00257902 Jy
! Component: 3100  -  total flux cleaned = 0.00257903 Jy
! Component: 3150  -  total flux cleaned = 0.0025561 Jy
! Component: 3200  -  total flux cleaned = 0.00255615 Jy
! Component: 3250  -  total flux cleaned = 0.00251097 Jy
! Component: 3300  -  total flux cleaned = 0.00247721 Jy
! Component: 3350  -  total flux cleaned = 0.00245481 Jy
! Component: 3400  -  total flux cleaned = 0.00243261 Jy
! Component: 3450  -  total flux cleaned = 0.00242152 Jy
! Component: 3500  -  total flux cleaned = 0.00238857 Jy
! Component: 3550  -  total flux cleaned = 0.0023776 Jy
! Component: 3600  -  total flux cleaned = 0.00234476 Jy
! Component: 3650  -  total flux cleaned = 0.00237746 Jy
! Component: 3700  -  total flux cleaned = 0.0024209 Jy
! Component: 3750  -  total flux cleaned = 0.00243173 Jy
! Component: 3800  -  total flux cleaned = 0.00245333 Jy
! Component: 3850  -  total flux cleaned = 0.00247492 Jy
! Component: 3900  -  total flux cleaned = 0.00251781 Jy
! Component: 3950  -  total flux cleaned = 0.00254992 Jy
! Component: 4000  -  total flux cleaned = 0.00254989 Jy
! Component: 4050  -  total flux cleaned = 0.00252858 Jy
! Total flux subtracted in 4096 components = 0.00257109 Jy
! Clean residual min=-0.000584 max=0.000753 Jy/beam
! Clean residual mean=0.000002 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.277 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 587 components and 0.277 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0743-3803_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.192 x 42.61 at 0.3104 degrees (North through East)
! Clean map  min=-0.0019957  max=0.19207 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0743-3803_S_map.fits
wmodel /image_prod/ug002_uva//J0743-3803_S_map.mod
! Writing 587 model components to file: /image_prod/ug002_uva//J0743-3803_S_map.mod
wobs   /image_prod/ug002_uva//J0743-3803_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0743-3803_S_uvs.fits
wwins  /image_prod/ug002_uva//J0743-3803_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0743-3803_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.192067 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212465 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.331862 0.331862 0.663723 1.32745 2.65489 5.30979 10.6196 21.2392 42.4783 84.9566
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.192 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  903.99 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0743-3803_S_dfm.log closed on Wed Mar  4 21:57:31 2020