! Started logfile: /image_prod/ug002_uva//J0738-3322_X_dfm.log on Wed Mar  4 21:55:15 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0738-3322_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0738-3322_X_uva.fits
! AN table 1: 74 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.880255 visibilities/baseline/integration-bin.
! Found source: J0738-3322
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 28140 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0738-3322_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.025753Jy  sigma=7.601682
! Fit after  self-cal, rms=0.863572Jy  sigma=6.367502
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6845 mas, bmaj=3.571 mas, bpa=-19.26 degrees
! Estimated noise=1.6027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0937246 Jy
! Component: 100  -  total flux cleaned = 0.140634 Jy
! Total flux subtracted in 100 components = 0.140634 Jy
! Clean residual min=-0.019363 max=0.054116 Jy/beam
! Clean residual mean=-0.000099 rms=0.005925 Jy/beam
! Combined flux in latest and established models = 0.140634 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.140634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.133873Jy  sigma=0.959545
! Fit after  self-cal, rms=0.133495Jy  sigma=0.956319
! Inverting map 
! Added new window around map position (11, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0493001 Jy
! Component: 100  -  total flux cleaned = 0.0803811 Jy
! Total flux subtracted in 100 components = 0.0803811 Jy
! Clean residual min=-0.013459 max=0.018110 Jy/beam
! Clean residual mean=-0.000071 rms=0.003809 Jy/beam
! Combined flux in latest and established models = 0.221015 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 46 components and 0.221015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104133Jy  sigma=0.724367
! Fit after  self-cal, rms=0.103103Jy  sigma=0.717930
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0260223 Jy
! Component: 100  -  total flux cleaned = 0.0457391 Jy
! Total flux subtracted in 100 components = 0.0457391 Jy
! Clean residual min=-0.010432 max=0.011772 Jy/beam
! Clean residual mean=-0.000052 rms=0.002910 Jy/beam
! Combined flux in latest and established models = 0.266755 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 62 components and 0.266755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091281Jy  sigma=0.621823
! Fit after  self-cal, rms=0.091182Jy  sigma=0.621254
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9586 mas, bmaj=4.199 mas, bpa=-16.88 degrees
! Estimated noise=0.581488 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0264833 Jy
! Component: 100  -  total flux cleaned = 0.045257 Jy
! Component: 150  -  total flux cleaned = 0.059159 Jy
! Component: 200  -  total flux cleaned = 0.0697146 Jy
! Total flux subtracted in 200 components = 0.0697146 Jy
! Clean residual min=-0.008196 max=0.009352 Jy/beam
! Clean residual mean=-0.000027 rms=0.002466 Jy/beam
! Combined flux in latest and established models = 0.336469 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 110 components and 0.336469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080817Jy  sigma=0.535960
! Fit after  self-cal, rms=0.080713Jy  sigma=0.535418
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9586 x 4.199 at -16.88 degrees (North through East)
! Clean map  min=-0.0083803  max=0.12512 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.81     FD        1.01     HN        1.09     KP        1.01     
!   LA        0.97     MK        1.05     NL        1.17     OV        0.90     
!   PT        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.01     HN        1.17     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.18     OV        0.90     
!   PT        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.00     HN        1.27     KP        1.01     
!   LA        0.98     MK        1.01     NL        1.17     OV        0.91     
!   PT        0.86     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.01     HN        1.20     KP        1.03     
!   LA        0.99     MK        1.02     NL        1.17     OV        0.91     
!   PT        0.89     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.00     HN        1.14     KP        1.02     
!   LA        0.97     MK        0.98     NL        1.18     OV        0.93     
!   PT        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.02     HN        1.17     KP        1.03     
!   LA        1.00     MK        1.08     NL        1.17     OV        0.90     
!   PT        0.90     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.01     HN        1.11     KP        1.03     
!   LA        1.00     MK        1.04     NL        1.17     OV        0.91     
!   PT        0.88     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.00     HN        1.09     KP        1.02     
!   LA        1.01     MK        1.04     NL        1.18     OV        0.92     
!   PT        0.89     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.02     HN        1.17     KP        1.00     
!   LA        1.00     MK        1.07     NL        1.17     OV        0.92     
!   PT        0.91     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.03     HN        1.09     KP        1.03     
!   LA        0.98     MK        1.04     NL        1.19     OV        0.94     
!   PT        0.90     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.02     HN        1.04     KP        1.06     
!   LA        1.01     MK        0.98     NL        1.15     OV        0.93     
!   PT        0.92     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.03     HN        1.13     KP        1.02     
!   LA        1.02     MK        1.05     NL        1.16     OV        0.92     
!   PT        0.93     
! 
! 
! Fit before self-cal, rms=0.080713Jy  sigma=0.535418
! Fit after  self-cal, rms=0.074358Jy  sigma=0.499122
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9906 mas, bmaj=4.18 mas, bpa=-16.97 degrees
! Estimated noise=0.566027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00327024 Jy
! Component: 100  -  total flux cleaned = 0.0048387 Jy
! Component: 150  -  total flux cleaned = 0.00644154 Jy
! Component: 200  -  total flux cleaned = 0.0076411 Jy
! Total flux subtracted in 200 components = 0.0076411 Jy
! Clean residual min=-0.003869 max=0.003560 Jy/beam
! Clean residual mean=0.000006 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.34411 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 128 components and 0.34411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073492Jy  sigma=0.491254
! Fit after  self-cal, rms=0.073551Jy  sigma=0.490897
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073551Jy  sigma=0.490897
! Fit after  self-cal, rms=0.073449Jy  sigma=0.485334
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9881 mas, bmaj=4.185 mas, bpa=-17.22 degrees
! Estimated noise=0.562538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000983 Jy
! Component: 100  -  total flux cleaned = 0.00166927 Jy
! Component: 150  -  total flux cleaned = 0.0023209 Jy
! Component: 200  -  total flux cleaned = 0.00271917 Jy
! Total flux subtracted in 200 components = 0.00271917 Jy
! Clean residual min=-0.002319 max=0.002268 Jy/beam
! Clean residual mean=0.000002 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.346829 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 137 components and 0.346829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073306Jy  sigma=0.484238
! Fit after  self-cal, rms=0.073323Jy  sigma=0.484198
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17.8, 12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139658 Jy
! Component: 100  -  total flux cleaned = 0.00144411 Jy
! Component: 150  -  total flux cleaned = 0.00153399 Jy
! Component: 200  -  total flux cleaned = 0.0015776 Jy
! Total flux subtracted in 200 components = 0.0015776 Jy
! Clean residual min=-0.002174 max=0.001831 Jy/beam
! Clean residual mean=0.000001 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.348407 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 155 components and 0.348407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073232Jy  sigma=0.483671
! Fit after  self-cal, rms=0.073235Jy  sigma=0.483647
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073235Jy  sigma=0.483647
! Fit after  self-cal, rms=0.073237Jy  sigma=0.483459
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9856 mas, bmaj=4.183 mas, bpa=-17.24 degrees
! Estimated noise=0.560588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000461695 Jy
! Component: 100  -  total flux cleaned = 0.000697237 Jy
! Component: 150  -  total flux cleaned = 0.00076868 Jy
! Component: 200  -  total flux cleaned = 0.000868822 Jy
! Total flux subtracted in 200 components = 0.000868822 Jy
! Clean residual min=-0.001861 max=0.001796 Jy/beam
! Clean residual mean=0.000000 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.349276 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 164 components and 0.349276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073193Jy  sigma=0.483210
! Fit after  self-cal, rms=0.073197Jy  sigma=0.483205
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125542 Jy
! Component: 100  -  total flux cleaned = 0.000155285 Jy
! Component: 150  -  total flux cleaned = 0.00018281 Jy
! Component: 200  -  total flux cleaned = 0.000209394 Jy
! Total flux subtracted in 200 components = 0.000209394 Jy
! Clean residual min=-0.001760 max=0.001695 Jy/beam
! Clean residual mean=0.000000 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.349485 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 166 components and 0.349485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073172Jy  sigma=0.483067
! Fit after  self-cal, rms=0.073172Jy  sigma=0.483064
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073172Jy  sigma=0.483064
! Fit after  self-cal, rms=0.073157Jy  sigma=0.483024
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.457 mas, bmaj=7.772 mas, bpa=1.659 degrees
! Estimated noise=0.640316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000691386 Jy
! Component: 100  -  total flux cleaned = 0.00110606 Jy
! Component: 150  -  total flux cleaned = 0.0012393 Jy
! Component: 200  -  total flux cleaned = 0.00133532 Jy
! Total flux subtracted in 200 components = 0.00133532 Jy
! Clean residual min=-0.001571 max=0.001533 Jy/beam
! Clean residual mean=0.000001 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.350821 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 179 components and 0.350821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073146Jy  sigma=0.482940
! Fit after  self-cal, rms=0.073147Jy  sigma=0.482934
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.44174e-05 Jy
! Component: 100  -  total flux cleaned = -3.46664e-05 Jy
! Component: 150  -  total flux cleaned = -3.4788e-05 Jy
! Component: 200  -  total flux cleaned = -1.69726e-05 Jy
! Total flux subtracted in 200 components = -1.69726e-05 Jy
! Clean residual min=-0.001501 max=0.001472 Jy/beam
! Clean residual mean=0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.350804 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 184 components and 0.350804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073142Jy  sigma=0.482902
! Fit after  self-cal, rms=0.073141Jy  sigma=0.482898
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9845 mas, bmaj=4.18 mas, bpa=-17.23 degrees
! Estimated noise=0.560067 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9845 x 4.18 at -17.23 degrees (North through East)
! Clean map  min=-0.0015741  max=0.12455 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7016 mas, bmaj=3.568 mas, bpa=-19.62 degrees
! Estimated noise=1.58722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0946843 Jy
! Component: 100  -  total flux cleaned = 0.152101 Jy
! Component: 150  -  total flux cleaned = 0.19111 Jy
! Component: 200  -  total flux cleaned = 0.219783 Jy
! Total flux subtracted in 200 components = 0.219783 Jy
! Clean residual min=-0.010658 max=0.016762 Jy/beam
! Clean residual mean=-0.000059 rms=0.003128 Jy/beam
! Combined flux in latest and established models = 0.219783 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.219783 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9845 mas, bmaj=4.18 mas, bpa=-17.23 degrees
! Estimated noise=0.560067 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344259 Jy
! Component: 100  -  total flux cleaned = 0.0575663 Jy
! Component: 150  -  total flux cleaned = 0.0738755 Jy
! Component: 200  -  total flux cleaned = 0.0858529 Jy
! Total flux subtracted in 200 components = 0.0858529 Jy
! Clean residual min=-0.004227 max=0.006996 Jy/beam
! Clean residual mean=-0.000028 rms=0.001477 Jy/beam
! Combined flux in latest and established models = 0.305635 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 96 components and 0.305635 Jy
! Inverting map 
! Added new window around map position (9.6, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00911998 Jy
! Component: 100  -  total flux cleaned = 0.0161781 Jy
! Component: 150  -  total flux cleaned = 0.0217405 Jy
! Component: 200  -  total flux cleaned = 0.0261733 Jy
! Total flux subtracted in 200 components = 0.0261733 Jy
! Clean residual min=-0.002294 max=0.003302 Jy/beam
! Clean residual mean=-0.000010 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.331809 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 130 components and 0.331809 Jy
! Inverting map 
! Added new window around map position (1.8, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0037866 Jy
! Component: 100  -  total flux cleaned = 0.0068054 Jy
! Component: 150  -  total flux cleaned = 0.00929844 Jy
! Component: 200  -  total flux cleaned = 0.0113843 Jy
! Total flux subtracted in 200 components = 0.0113843 Jy
! Clean residual min=-0.001780 max=0.001766 Jy/beam
! Clean residual mean=-0.000004 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.343193 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 150 components and 0.343193 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.457 mas, bmaj=7.772 mas, bpa=1.659 degrees
! Estimated noise=0.640316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232595 Jy
! Component: 100  -  total flux cleaned = 0.00397078 Jy
! Component: 150  -  total flux cleaned = 0.00469076 Jy
! Component: 200  -  total flux cleaned = 0.0053027 Jy
! Total flux subtracted in 200 components = 0.0053027 Jy
! Clean residual min=-0.001465 max=0.001358 Jy/beam
! Clean residual mean=-0.000002 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.348496 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000492661 Jy
! Component: 100  -  total flux cleaned = 0.000894963 Jy
! Component: 150  -  total flux cleaned = 0.00128654 Jy
! Component: 200  -  total flux cleaned = 0.00163353 Jy
! Total flux subtracted in 200 components = 0.00163353 Jy
! Clean residual min=-0.001279 max=0.001243 Jy/beam
! Clean residual mean=-0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.350129 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 233 components and 0.350129 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9845 mas, bmaj=4.18 mas, bpa=-17.23 degrees
! Estimated noise=0.560067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.32208e-05 Jy
! Component: 100  -  total flux cleaned = 0.000125967 Jy
! Component: 150  -  total flux cleaned = 0.000343935 Jy
! Component: 200  -  total flux cleaned = 0.000542736 Jy
! Total flux subtracted in 200 components = 0.000542736 Jy
! Clean residual min=-0.001305 max=0.001266 Jy/beam
! Clean residual mean=-0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.350672 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 252 components and 0.350672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073086Jy  sigma=0.482353
! Fit after  self-cal, rms=0.073059Jy  sigma=0.482264
wmodel J0738-3322_X_map.mod
! Writing 252 model components to file: J0738-3322_X_map.mod
wobs   J0738-3322_X_uvs.fits
! Writing UV FITS file: J0738-3322_X_uvs.fits
wwins  J0738-3322_X_map.win
! wwins: Wrote 5 windows to J0738-3322_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110879 Jy
! Component: 100  -  total flux cleaned = -0.00011044 Jy
! Component: 150  -  total flux cleaned = -0.00014746 Jy
! Component: 200  -  total flux cleaned = -0.000183392 Jy
! Component: 250  -  total flux cleaned = -0.000269557 Jy
! Component: 300  -  total flux cleaned = -0.000387488 Jy
! Component: 350  -  total flux cleaned = -0.000469718 Jy
! Component: 400  -  total flux cleaned = -0.000597291 Jy
! Component: 450  -  total flux cleaned = -0.000674731 Jy
! Component: 500  -  total flux cleaned = -0.000735527 Jy
! Component: 550  -  total flux cleaned = -0.000795087 Jy
! Component: 600  -  total flux cleaned = -0.000867902 Jy
! Component: 650  -  total flux cleaned = -0.000938826 Jy
! Component: 700  -  total flux cleaned = -0.000994349 Jy
! Component: 750  -  total flux cleaned = -0.00100808 Jy
! Component: 800  -  total flux cleaned = -0.00108813 Jy
! Component: 850  -  total flux cleaned = -0.00115351 Jy
! Component: 900  -  total flux cleaned = -0.00117898 Jy
! Component: 950  -  total flux cleaned = -0.00121714 Jy
! Component: 1000  -  total flux cleaned = -0.00121737 Jy
! Component: 1050  -  total flux cleaned = -0.00125411 Jy
! Component: 1100  -  total flux cleaned = -0.00124196 Jy
! Component: 1150  -  total flux cleaned = -0.00126584 Jy
! Component: 1200  -  total flux cleaned = -0.00131278 Jy
! Component: 1250  -  total flux cleaned = -0.00127847 Jy
! Component: 1300  -  total flux cleaned = -0.00128998 Jy
! Component: 1350  -  total flux cleaned = -0.0013124 Jy
! Component: 1400  -  total flux cleaned = -0.00126803 Jy
! Component: 1450  -  total flux cleaned = -0.00129007 Jy
! Component: 1500  -  total flux cleaned = -0.00127936 Jy
! Component: 1550  -  total flux cleaned = -0.0012689 Jy
! Component: 1600  -  total flux cleaned = -0.00127956 Jy
! Component: 1650  -  total flux cleaned = -0.00125887 Jy
! Component: 1700  -  total flux cleaned = -0.00128971 Jy
! Component: 1750  -  total flux cleaned = -0.00128966 Jy
! Component: 1800  -  total flux cleaned = -0.00128964 Jy
! Component: 1850  -  total flux cleaned = -0.0013495 Jy
! Component: 1900  -  total flux cleaned = -0.00136907 Jy
! Component: 1950  -  total flux cleaned = -0.00139838 Jy
! Component: 2000  -  total flux cleaned = -0.00141781 Jy
! Component: 2050  -  total flux cleaned = -0.00140819 Jy
! Component: 2100  -  total flux cleaned = -0.00141773 Jy
! Component: 2150  -  total flux cleaned = -0.00143656 Jy
! Component: 2200  -  total flux cleaned = -0.00146466 Jy
! Component: 2250  -  total flux cleaned = -0.00145528 Jy
! Component: 2300  -  total flux cleaned = -0.00146446 Jy
! Component: 2350  -  total flux cleaned = -0.00147363 Jy
! Component: 2400  -  total flux cleaned = -0.0014555 Jy
! Component: 2450  -  total flux cleaned = -0.00148254 Jy
! Component: 2500  -  total flux cleaned = -0.00149136 Jy
! Component: 2550  -  total flux cleaned = -0.00149129 Jy
! Component: 2600  -  total flux cleaned = -0.00148251 Jy
! Component: 2650  -  total flux cleaned = -0.00149999 Jy
! Component: 2700  -  total flux cleaned = -0.00148267 Jy
! Component: 2750  -  total flux cleaned = -0.00150851 Jy
! Component: 2800  -  total flux cleaned = -0.00151701 Jy
! Component: 2850  -  total flux cleaned = -0.00153392 Jy
! Component: 2900  -  total flux cleaned = -0.00154238 Jy
! Component: 2950  -  total flux cleaned = -0.00154236 Jy
! Component: 3000  -  total flux cleaned = -0.00150918 Jy
! Component: 3050  -  total flux cleaned = -0.00153391 Jy
! Component: 3100  -  total flux cleaned = -0.00154202 Jy
! Component: 3150  -  total flux cleaned = -0.00152585 Jy
! Component: 3200  -  total flux cleaned = -0.00153396 Jy
! Component: 3250  -  total flux cleaned = -0.00157396 Jy
! Component: 3300  -  total flux cleaned = -0.00155807 Jy
! Component: 3350  -  total flux cleaned = -0.0015817 Jy
! Component: 3400  -  total flux cleaned = -0.00157389 Jy
! Component: 3450  -  total flux cleaned = -0.00156603 Jy
! Component: 3500  -  total flux cleaned = -0.00158928 Jy
! Component: 3550  -  total flux cleaned = -0.0015739 Jy
! Component: 3600  -  total flux cleaned = -0.00158153 Jy
! Component: 3650  -  total flux cleaned = -0.00155872 Jy
! Component: 3700  -  total flux cleaned = -0.00158144 Jy
! Component: 3750  -  total flux cleaned = -0.00158128 Jy
! Component: 3800  -  total flux cleaned = -0.00155883 Jy
! Component: 3850  -  total flux cleaned = -0.00158853 Jy
! Component: 3900  -  total flux cleaned = -0.00157374 Jy
! Component: 3950  -  total flux cleaned = -0.00157382 Jy
! Component: 4000  -  total flux cleaned = -0.00158835 Jy
! Component: 4050  -  total flux cleaned = -0.00160282 Jy
! Total flux subtracted in 4096 components = -0.00158837 Jy
! Clean residual min=-0.000393 max=0.000435 Jy/beam
! Clean residual mean=-0.000001 rms=0.000129 Jy/beam
! Combined flux in latest and established models = 0.349084 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 530 components and 0.349084 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0738-3322_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9845 x 4.18 at -17.23 degrees (North through East)
! Clean map  min=-0.0012594  max=0.12961 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0738-3322_X_map.fits
wmodel /image_prod/ug002_uva//J0738-3322_X_map.mod
! Writing 530 model components to file: /image_prod/ug002_uva//J0738-3322_X_map.mod
wobs   /image_prod/ug002_uva//J0738-3322_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0738-3322_X_uvs.fits
wwins  /image_prod/ug002_uva//J0738-3322_X_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J0738-3322_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.129613 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000127368 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.294803 0.294803 0.589607 1.17921 2.35843 4.71685 9.43371 18.8674 37.7348 75.4697
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.129 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1017.63 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0738-3322_X_dfm.log closed on Wed Mar  4 21:55:20 2020