! Started logfile: /image_prod/ug002_uva//J0733+5022_X_dfm.log on Wed Mar 4 21:52:42 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0733+5022_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0733+5022_X_uva.fits ! AN table 1: 80 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.963194 visibilities/baseline/integration-bin. ! Found source: J0733+5022 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 33288 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0733+5022_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.098244Jy sigma=8.699834 ! Fit after self-cal, rms=0.569119Jy sigma=4.535965 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7979 mas, bmaj=1.485 mas, bpa=-24.93 degrees ! Estimated noise=1.02568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.325997 Jy ! Component: 100 - total flux cleaned = 0.399856 Jy ! Total flux subtracted in 100 components = 0.399856 Jy ! Clean residual min=-0.013650 max=0.031481 Jy/beam ! Clean residual mean=0.000031 rms=0.003386 Jy/beam ! Combined flux in latest and established models = 0.399856 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.399856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114813Jy sigma=0.871014 ! Fit after self-cal, rms=0.114774Jy sigma=0.870711 ! Inverting map ! Added new window around map position (-1, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346231 Jy ! Component: 100 - total flux cleaned = 0.0567996 Jy ! Total flux subtracted in 100 components = 0.0567996 Jy ! Clean residual min=-0.012403 max=0.016823 Jy/beam ! Clean residual mean=0.000021 rms=0.002730 Jy/beam ! Combined flux in latest and established models = 0.456656 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 0.456655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096513Jy sigma=0.719979 ! Fit after self-cal, rms=0.096026Jy sigma=0.715770 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181617 Jy ! Component: 100 - total flux cleaned = 0.0316131 Jy ! Total flux subtracted in 100 components = 0.0316131 Jy ! Clean residual min=-0.010637 max=0.012829 Jy/beam ! Clean residual mean=0.000016 rms=0.002444 Jy/beam ! Combined flux in latest and established models = 0.488269 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.488269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089747Jy sigma=0.663886 ! Fit after self-cal, rms=0.089601Jy sigma=0.662446 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.073 mas, bmaj=1.762 mas, bpa=-22.51 degrees ! Estimated noise=0.497103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182583 Jy ! Component: 100 - total flux cleaned = 0.0300323 Jy ! Component: 150 - total flux cleaned = 0.0372547 Jy ! Component: 200 - total flux cleaned = 0.039536 Jy ! Total flux subtracted in 200 components = 0.039536 Jy ! Clean residual min=-0.009939 max=0.011900 Jy/beam ! Clean residual mean=0.000027 rms=0.002590 Jy/beam ! Combined flux in latest and established models = 0.527805 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 57 components and 0.527805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085288Jy sigma=0.624282 ! Fit after self-cal, rms=0.085199Jy sigma=0.622998 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.073 x 1.762 at -22.51 degrees (North through East) ! Clean map min=-0.0096753 max=0.42553 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.03 HN 0.99 KP 1.10 ! LA 1.02 MK 1.09 NL 1.13 OV 0.95 ! PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.03 HN 0.98 KP 1.09 ! LA 1.02 MK 1.06 NL 1.14 OV 0.94 ! PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.02 HN 1.00 KP 1.09 ! LA 1.01 MK 1.09 NL 1.13 OV 0.93 ! PT 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.01 HN 1.00 KP 1.10 ! LA 1.01 MK 1.08 NL 1.14 OV 0.93 ! PT 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.97 KP 1.09 ! LA 1.00 MK 1.06 NL 1.13 OV 0.94 ! PT 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.02 HN 0.99 KP 1.09 ! LA 1.01 MK 1.06 NL 1.12 OV 0.93 ! PT 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.01 HN 0.97 KP 1.08 ! LA 1.00 MK 1.05 NL 1.13 OV 0.92 ! PT 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.99 HN 0.97 KP 1.08 ! LA 1.01 MK 1.06 NL 1.12 OV 0.93 ! PT 0.90 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00 HN 0.97 KP 1.05 ! LA 1.02 MK 1.06 NL 1.11 OV 0.92 ! PT 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00 HN 0.98 KP 1.08 ! LA 0.99 MK 1.05 NL 1.13 OV 0.94 ! PT 0.90 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00 HN 0.96 KP 1.10 ! LA 1.00 MK 1.06 NL 1.09 OV 0.92 ! PT 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.01 HN 0.97 KP 1.08 ! LA 1.01 MK 1.09 NL 1.09 OV 0.91 ! PT 0.91 ! ! ! Fit before self-cal, rms=0.085199Jy sigma=0.622998 ! Fit after self-cal, rms=0.070223Jy sigma=0.505900 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.096 mas, bmaj=1.766 mas, bpa=-22.34 degrees ! Estimated noise=0.49465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010124 Jy ! Component: 100 - total flux cleaned = 0.0121876 Jy ! Component: 150 - total flux cleaned = 0.0138102 Jy ! Component: 200 - total flux cleaned = 0.0147358 Jy ! Total flux subtracted in 200 components = 0.0147358 Jy ! Clean residual min=-0.005010 max=0.006254 Jy/beam ! Clean residual mean=0.000005 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.542541 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 0.542541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067840Jy sigma=0.486549 ! Fit after self-cal, rms=0.067724Jy sigma=0.485105 ! Inverting map ! Added new window around map position (-5.2, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413594 Jy ! Component: 100 - total flux cleaned = 0.00626786 Jy ! Component: 150 - total flux cleaned = 0.00763208 Jy ! Component: 200 - total flux cleaned = 0.00830821 Jy ! Total flux subtracted in 200 components = 0.00830821 Jy ! Clean residual min=-0.004583 max=0.005312 Jy/beam ! Clean residual mean=0.000000 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.550849 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 101 components and 0.550849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066813Jy sigma=0.478260 ! Fit after self-cal, rms=0.066789Jy sigma=0.477932 ! Inverting map ! Added new window around map position (-38.6, -24.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414944 Jy ! Component: 100 - total flux cleaned = 0.00587526 Jy ! Component: 150 - total flux cleaned = 0.00659007 Jy ! Component: 200 - total flux cleaned = 0.00703162 Jy ! Total flux subtracted in 200 components = 0.00703162 Jy ! Clean residual min=-0.004345 max=0.004963 Jy/beam ! Clean residual mean=-0.000003 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.557881 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 118 components and 0.557881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066196Jy sigma=0.474032 ! Fit after self-cal, rms=0.066179Jy sigma=0.473855 ! Inverting map ! Added new window around map position (9.6, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309739 Jy ! Component: 100 - total flux cleaned = 0.00411353 Jy ! Component: 150 - total flux cleaned = 0.00463021 Jy ! Component: 200 - total flux cleaned = 0.00492042 Jy ! Total flux subtracted in 200 components = 0.00492042 Jy ! Clean residual min=-0.004394 max=0.004873 Jy/beam ! Clean residual mean=-0.000002 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.562801 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 131 components and 0.562801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065704Jy sigma=0.470844 ! Fit after self-cal, rms=0.065695Jy sigma=0.470675 ! Inverting map ! Added new window around map position (1.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235941 Jy ! Component: 100 - total flux cleaned = 0.00234334 Jy ! Component: 150 - total flux cleaned = 0.0026429 Jy ! Component: 200 - total flux cleaned = 0.00283243 Jy ! Total flux subtracted in 200 components = 0.00283243 Jy ! Clean residual min=-0.004391 max=0.003772 Jy/beam ! Clean residual mean=-0.000003 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.565634 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 154 components and 0.565634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065248Jy sigma=0.467740 ! Fit after self-cal, rms=0.065225Jy sigma=0.467558 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065225Jy sigma=0.467558 ! Fit after self-cal, rms=0.064034Jy sigma=0.445767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.093 mas, bmaj=1.78 mas, bpa=-22.65 degrees ! Estimated noise=0.495401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000666268 Jy ! Component: 100 - total flux cleaned = 0.00117409 Jy ! Component: 150 - total flux cleaned = 0.000769155 Jy ! Component: 200 - total flux cleaned = 0.00062375 Jy ! Total flux subtracted in 200 components = 0.00062375 Jy ! Clean residual min=-0.002001 max=0.002274 Jy/beam ! Clean residual mean=-0.000001 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.566257 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 173 components and 0.566257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063765Jy sigma=0.443335 ! Fit after self-cal, rms=0.063770Jy sigma=0.443110 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 20.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112313 Jy ! Component: 100 - total flux cleaned = 0.00119962 Jy ! Component: 150 - total flux cleaned = 0.000889243 Jy ! Component: 200 - total flux cleaned = 0.000889533 Jy ! Total flux subtracted in 200 components = 0.000889533 Jy ! Clean residual min=-0.001756 max=0.001875 Jy/beam ! Clean residual mean=-0.000003 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.567147 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 183 components and 0.567147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063634Jy sigma=0.441860 ! Fit after self-cal, rms=0.063623Jy sigma=0.441796 ! Inverting map ! Added new window around map position (-11.4, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000922803 Jy ! Component: 100 - total flux cleaned = 0.00109959 Jy ! Component: 150 - total flux cleaned = 0.000933798 Jy ! Component: 200 - total flux cleaned = 0.000730464 Jy ! Total flux subtracted in 200 components = 0.000730464 Jy ! Clean residual min=-0.001587 max=0.001647 Jy/beam ! Clean residual mean=-0.000003 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.567877 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 203 components and 0.567877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063523Jy sigma=0.440916 ! Fit after self-cal, rms=0.063520Jy sigma=0.440901 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063520Jy sigma=0.440901 ! Fit after self-cal, rms=0.063689Jy sigma=0.440488 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.093 mas, bmaj=1.781 mas, bpa=-22.72 degrees ! Estimated noise=0.495452 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000322989 Jy ! Component: 100 - total flux cleaned = -0.000663107 Jy ! Component: 150 - total flux cleaned = -0.000966107 Jy ! Component: 200 - total flux cleaned = -0.00120306 Jy ! Total flux subtracted in 200 components = -0.00120306 Jy ! Clean residual min=-0.001486 max=0.001455 Jy/beam ! Clean residual mean=-0.000003 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.566674 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 217 components and 0.566674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063606Jy sigma=0.439721 ! Fit after self-cal, rms=0.063602Jy sigma=0.439692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018633 Jy ! Component: 100 - total flux cleaned = -0.00053781 Jy ! Component: 150 - total flux cleaned = -0.000746903 Jy ! Component: 200 - total flux cleaned = -0.000907814 Jy ! Total flux subtracted in 200 components = -0.000907814 Jy ! Clean residual min=-0.001449 max=0.001364 Jy/beam ! Clean residual mean=-0.000003 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.565767 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 228 components and 0.565766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063550Jy sigma=0.439240 ! Fit after self-cal, rms=0.063546Jy sigma=0.439230 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063546Jy sigma=0.439230 ! Fit after self-cal, rms=0.063630Jy sigma=0.439141 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=2.521 mas, bpa=-4.876 degrees ! Estimated noise=0.594672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00053661 Jy ! Component: 100 - total flux cleaned = -0.000777531 Jy ! Component: 150 - total flux cleaned = -0.00112374 Jy ! Component: 200 - total flux cleaned = -0.00142651 Jy ! Total flux subtracted in 200 components = -0.00142651 Jy ! Clean residual min=-0.001312 max=0.001356 Jy/beam ! Clean residual mean=-0.000005 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.56434 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 251 components and 0.56434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063599Jy sigma=0.438836 ! Fit after self-cal, rms=0.063597Jy sigma=0.438817 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198909 Jy ! Component: 100 - total flux cleaned = -0.000421603 Jy ! Component: 150 - total flux cleaned = -0.000678891 Jy ! Component: 200 - total flux cleaned = -0.000895969 Jy ! Total flux subtracted in 200 components = -0.000895969 Jy ! Clean residual min=-0.001290 max=0.001356 Jy/beam ! Clean residual mean=-0.000005 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.563444 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 261 components and 0.563444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063581Jy sigma=0.438663 ! Fit after self-cal, rms=0.063579Jy sigma=0.438653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.093 mas, bmaj=1.782 mas, bpa=-22.77 degrees ! Estimated noise=0.495368 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.093 x 1.782 at -22.77 degrees (North through East) ! Clean map min=-0.002209 max=0.42131 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8106 mas, bmaj=1.512 mas, bpa=-25.22 degrees ! Estimated noise=1.03619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.3289 Jy ! Component: 100 - total flux cleaned = 0.405489 Jy ! Component: 150 - total flux cleaned = 0.438483 Jy ! Component: 200 - total flux cleaned = 0.458582 Jy ! Total flux subtracted in 200 components = 0.458582 Jy ! Clean residual min=-0.005153 max=0.011247 Jy/beam ! Clean residual mean=0.000017 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.458581 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.458581 Jy ! Inverting map and beam ! Estimated beam: bmin=1.093 mas, bmaj=1.782 mas, bpa=-22.77 degrees ! Estimated noise=0.495368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238121 Jy ! Component: 100 - total flux cleaned = 0.0395455 Jy ! Component: 150 - total flux cleaned = 0.0507733 Jy ! Component: 200 - total flux cleaned = 0.0591187 Jy ! Total flux subtracted in 200 components = 0.0591187 Jy ! Clean residual min=-0.002926 max=0.004817 Jy/beam ! Clean residual mean=0.000023 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.5177 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 76 components and 0.5177 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637064 Jy ! Component: 100 - total flux cleaned = 0.0114679 Jy ! Component: 150 - total flux cleaned = 0.0156507 Jy ! Component: 200 - total flux cleaned = 0.0191827 Jy ! Total flux subtracted in 200 components = 0.0191827 Jy ! Clean residual min=-0.002086 max=0.002280 Jy/beam ! Clean residual mean=0.000010 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.536883 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 110 components and 0.536883 Jy ! Inverting map ! Added new window around map position (-15.4, 26.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302467 Jy ! Component: 100 - total flux cleaned = 0.00563626 Jy ! Component: 150 - total flux cleaned = 0.00785879 Jy ! Component: 200 - total flux cleaned = 0.00935955 Jy ! Total flux subtracted in 200 components = 0.00935955 Jy ! Clean residual min=-0.001821 max=0.001877 Jy/beam ! Clean residual mean=0.000006 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.546243 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 135 components and 0.546242 Jy ! Inverting map ! Added new window around map position (-4.4, 28.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171872 Jy ! Component: 100 - total flux cleaned = 0.0028408 Jy ! Component: 150 - total flux cleaned = 0.0040065 Jy ! Component: 200 - total flux cleaned = 0.00515138 Jy ! Total flux subtracted in 200 components = 0.00515138 Jy ! Clean residual min=-0.001640 max=0.001462 Jy/beam ! Clean residual mean=0.000003 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.551394 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 157 components and 0.551394 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=2.521 mas, bpa=-4.876 degrees ! Estimated noise=0.594672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209467 Jy ! Component: 100 - total flux cleaned = 0.00356281 Jy ! Component: 150 - total flux cleaned = 0.0046249 Jy ! Component: 200 - total flux cleaned = 0.00528486 Jy ! Total flux subtracted in 200 components = 0.00528486 Jy ! Clean residual min=-0.001464 max=0.001700 Jy/beam ! Clean residual mean=0.000001 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.556679 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.8, 30.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001496 Jy ! Component: 100 - total flux cleaned = 0.00201577 Jy ! Component: 150 - total flux cleaned = 0.00237795 Jy ! Component: 200 - total flux cleaned = 0.00261384 Jy ! Total flux subtracted in 200 components = 0.00261384 Jy ! Clean residual min=-0.001233 max=0.001319 Jy/beam ! Clean residual mean=0.000001 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.559292 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 244 components and 0.559293 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.093 mas, bmaj=1.782 mas, bpa=-22.77 degrees ! Estimated noise=0.495368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427455 Jy ! Component: 100 - total flux cleaned = 0.000473848 Jy ! Component: 150 - total flux cleaned = 0.000515317 Jy ! Component: 200 - total flux cleaned = 0.000515224 Jy ! Total flux subtracted in 200 components = 0.000515224 Jy ! Clean residual min=-0.001382 max=0.001318 Jy/beam ! Clean residual mean=0.000000 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.559808 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 273 components and 0.559808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063546Jy sigma=0.438148 ! Fit after self-cal, rms=0.063505Jy sigma=0.437908 wmodel J0733+5022_X_map.mod ! Writing 273 model components to file: J0733+5022_X_map.mod wobs J0733+5022_X_uvs.fits ! Writing UV FITS file: J0733+5022_X_uvs.fits wwins J0733+5022_X_map.win ! wwins: Wrote 12 windows to J0733+5022_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.29807e-05 Jy ! Component: 100 - total flux cleaned = -0.000156827 Jy ! Component: 150 - total flux cleaned = -0.000264035 Jy ! Component: 200 - total flux cleaned = -0.000388518 Jy ! Component: 250 - total flux cleaned = -0.000569686 Jy ! Component: 300 - total flux cleaned = -0.000589259 Jy ! Component: 350 - total flux cleaned = -0.000627546 Jy ! Component: 400 - total flux cleaned = -0.000590292 Jy ! Component: 450 - total flux cleaned = -0.000553857 Jy ! Component: 500 - total flux cleaned = -0.000553478 Jy ! Component: 550 - total flux cleaned = -0.000482627 Jy ! Component: 600 - total flux cleaned = -0.000395908 Jy ! Component: 650 - total flux cleaned = -0.000310846 Jy ! Component: 700 - total flux cleaned = -0.000260666 Jy ! Component: 750 - total flux cleaned = -0.000227621 Jy ! Component: 800 - total flux cleaned = -0.000146031 Jy ! Component: 850 - total flux cleaned = -0.000113862 Jy ! Component: 900 - total flux cleaned = -6.61855e-05 Jy ! Component: 950 - total flux cleaned = -8.21933e-05 Jy ! Component: 1000 - total flux cleaned = -5.11348e-05 Jy ! Component: 1050 - total flux cleaned = -2.04375e-05 Jy ! Component: 1100 - total flux cleaned = -5.18764e-06 Jy ! Component: 1150 - total flux cleaned = 2.46554e-05 Jy ! Component: 1200 - total flux cleaned = 9.68388e-06 Jy ! Component: 1250 - total flux cleaned = 1.01059e-05 Jy ! Component: 1300 - total flux cleaned = 6.81232e-05 Jy ! Component: 1350 - total flux cleaned = 1.04497e-05 Jy ! Component: 1400 - total flux cleaned = -1.78834e-05 Jy ! Component: 1450 - total flux cleaned = -3.19787e-05 Jy ! Component: 1500 - total flux cleaned = -3.19181e-05 Jy ! Component: 1550 - total flux cleaned = -4.55651e-05 Jy ! Component: 1600 - total flux cleaned = -4.56331e-05 Jy ! Component: 1650 - total flux cleaned = -7.27905e-05 Jy ! Component: 1700 - total flux cleaned = -9.9538e-05 Jy ! Component: 1750 - total flux cleaned = -4.63963e-05 Jy ! Component: 1800 - total flux cleaned = -4.62964e-05 Jy ! Component: 1850 - total flux cleaned = -0.000111788 Jy ! Component: 1900 - total flux cleaned = -0.000124713 Jy ! Component: 1950 - total flux cleaned = -8.63068e-05 Jy ! Component: 2000 - total flux cleaned = -0.000111876 Jy ! Component: 2050 - total flux cleaned = -0.000137205 Jy ! Component: 2100 - total flux cleaned = -9.97244e-05 Jy ! Component: 2150 - total flux cleaned = -0.000174326 Jy ! Component: 2200 - total flux cleaned = -0.000199171 Jy ! Component: 2250 - total flux cleaned = -0.000199335 Jy ! Component: 2300 - total flux cleaned = -0.000150851 Jy ! Component: 2350 - total flux cleaned = -0.000163018 Jy ! Component: 2400 - total flux cleaned = -0.000162931 Jy ! Component: 2450 - total flux cleaned = -0.000151 Jy ! Component: 2500 - total flux cleaned = -0.000174608 Jy ! Component: 2550 - total flux cleaned = -0.000162935 Jy ! Component: 2600 - total flux cleaned = -0.000139887 Jy ! Component: 2650 - total flux cleaned = -0.0001629 Jy ! Component: 2700 - total flux cleaned = -0.000185617 Jy ! Component: 2750 - total flux cleaned = -0.000185589 Jy ! Component: 2800 - total flux cleaned = -0.000129173 Jy ! Component: 2850 - total flux cleaned = -0.000185151 Jy ! Component: 2900 - total flux cleaned = -0.000185149 Jy ! Component: 2950 - total flux cleaned = -0.000173962 Jy ! Component: 3000 - total flux cleaned = -0.00021777 Jy ! Component: 3050 - total flux cleaned = -0.00015237 Jy ! Component: 3100 - total flux cleaned = -0.000184822 Jy ! Component: 3150 - total flux cleaned = -0.00013101 Jy ! Component: 3200 - total flux cleaned = -0.000163057 Jy ! Component: 3250 - total flux cleaned = -0.000141828 Jy ! Component: 3300 - total flux cleaned = -0.00017347 Jy ! Component: 3350 - total flux cleaned = -0.000184054 Jy ! Component: 3400 - total flux cleaned = -0.000152746 Jy ! Component: 3450 - total flux cleaned = -0.000173468 Jy ! Component: 3500 - total flux cleaned = -0.000194032 Jy ! Component: 3550 - total flux cleaned = -0.0001327 Jy ! Component: 3600 - total flux cleaned = -0.000153119 Jy ! Component: 3650 - total flux cleaned = -0.000193502 Jy ! Component: 3700 - total flux cleaned = -0.000213448 Jy ! Component: 3750 - total flux cleaned = -0.000153582 Jy ! Component: 3800 - total flux cleaned = -0.000143737 Jy ! Component: 3850 - total flux cleaned = -0.000133796 Jy ! Component: 3900 - total flux cleaned = -0.000143562 Jy ! Component: 3950 - total flux cleaned = -0.000153362 Jy ! Component: 4000 - total flux cleaned = -0.000172689 Jy ! Component: 4050 - total flux cleaned = -0.000153425 Jy ! Total flux subtracted in 4096 components = -0.00017264 Jy ! Clean residual min=-0.000592 max=0.000507 Jy/beam ! Clean residual mean=0.000000 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.559635 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 585 components and 0.559635 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0733+5022_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.093 x 1.782 at -22.77 degrees (North through East) ! Clean map min=-0.0012117 max=0.42246 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0733+5022_X_map.fits wmodel /image_prod/ug002_uva//J0733+5022_X_map.mod ! Writing 585 model components to file: /image_prod/ug002_uva//J0733+5022_X_map.mod wobs /image_prod/ug002_uva//J0733+5022_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0733+5022_X_uvs.fits wwins /image_prod/ug002_uva//J0733+5022_X_map.win ! wwins: Wrote 13 windows to /image_prod/ug002_uva//J0733+5022_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.422464 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000166695 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.118374 0.118374 0.236747 0.473494 0.946989 1.89398 3.78795 7.57591 15.1518 30.3036 60.6073 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.422 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2534.35 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0733+5022_X_dfm.log closed on Wed Mar 4 21:52:49 2020