! Started logfile: /image_prod/ug002_uva//J0730-1141_X_e_dfm.log on Wed Mar 4 21:50:36 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0730-1141_X_e_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0730-1141_X_e_uva.fits ! AN table 1: 6 integrations on 36 of 36 possible baselines. ! AN table 2: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.658333 visibilities/baseline/integration-bin. ! Found source: J0730-1141 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5688 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0730-1141_X_e] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=4.438458Jy sigma=8.127698 ! Fit after self-cal, rms=3.345426Jy sigma=6.029852 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6245 mas, bmaj=1.639 mas, bpa=-3.365 degrees ! Estimated noise=6.8568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12368 Jy ! Component: 100 - total flux cleaned = 3.83981 Jy ! Total flux subtracted in 100 components = 3.83981 Jy ! Clean residual min=-0.143842 max=0.268490 Jy/beam ! Clean residual mean=-0.000035 rms=0.032179 Jy/beam ! Combined flux in latest and established models = 3.83981 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 3.83981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.839223Jy sigma=1.433707 ! Fit after self-cal, rms=0.839030Jy sigma=1.433571 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.285675 Jy ! Component: 100 - total flux cleaned = 0.430623 Jy ! Total flux subtracted in 100 components = 0.430623 Jy ! Clean residual min=-0.112305 max=0.142276 Jy/beam ! Clean residual mean=-0.000035 rms=0.027071 Jy/beam ! Combined flux in latest and established models = 4.27043 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 4.27043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.660706Jy sigma=1.220653 ! Fit after self-cal, rms=0.660172Jy sigma=1.219841 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8126 mas, bmaj=1.982 mas, bpa=-1.062 degrees ! Estimated noise=5.26572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131208 Jy ! Component: 100 - total flux cleaned = 0.196612 Jy ! Component: 150 - total flux cleaned = 0.231376 Jy ! Component: 200 - total flux cleaned = 0.249999 Jy ! Total flux subtracted in 200 components = 0.249999 Jy ! Clean residual min=-0.143925 max=0.207160 Jy/beam ! Clean residual mean=-0.000373 rms=0.043447 Jy/beam ! Combined flux in latest and established models = 4.52043 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 4.52043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.617363Jy sigma=1.204068 ! Fit after self-cal, rms=0.617088Jy sigma=1.202953 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8126 x 1.982 at -1.062 degrees (North through East) ! Clean map min=-0.14082 max=4.1303 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.95 KP 1.02 ! LA 1.23 MK 1.00 NL 1.16 OV 0.90 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.27 HN 0.95 KP 1.02 ! LA 1.00 MK 0.98 OV 0.93 PT 0.87 ! SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.92 KP 1.02 ! LA 1.24 MK 1.00 NL 1.15 OV 0.91 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.28 HN 0.94 KP 1.01 ! LA 1.02 MK 0.96 OV 0.93 PT 0.88 ! SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.93 KP 1.02 ! LA 1.23 MK 1.03 NL 1.16 OV 0.91 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.25 HN 0.95 KP 1.01 ! LA 1.01 MK 0.99 OV 0.94 PT 0.87 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.93 KP 1.01 ! LA 1.22 MK 1.00 NL 1.16 OV 0.89 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.23 HN 0.93 KP 1.00 ! LA 1.00 MK 0.97 OV 0.93 PT 0.86 ! SC 1.00 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.94 KP 1.01 ! LA 1.22 MK 1.01 NL 1.17 OV 0.91 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.25 HN 0.94 KP 0.99 ! LA 0.99 MK 1.02 OV 0.91 PT 0.84 ! SC 0.99 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.94 KP 1.02 ! LA 1.22 MK 1.02 NL 1.15 OV 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.25 HN 0.96 KP 1.01 ! LA 0.99 MK 1.01 OV 0.90 PT 0.85 ! SC 1.02 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.92 KP 1.01 ! LA 1.25 MK 1.02 NL 1.15 OV 0.90 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.28 HN 0.93 KP 1.00 ! LA 1.02 MK 1.02 OV 0.88 PT 0.87 ! SC 1.00 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.94 KP 1.01 ! LA 1.24 MK 1.02 NL 1.17 OV 0.90 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.23 HN 0.95 KP 1.01 ! LA 1.02 MK 1.02 OV 0.90 PT 0.87 ! SC 0.97 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.95 KP 1.02 ! LA 1.22 MK 0.99 NL 1.17 OV 0.92 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.23 HN 0.95 KP 1.03 ! LA 0.99 MK 0.98 OV 0.92 PT 0.86 ! SC 1.01 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.95 KP 1.00 ! LA 1.24 MK 1.02 NL 1.15 OV 0.92 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.25 HN 0.93 KP 0.99 ! LA 1.01 MK 1.04 OV 0.92 PT 0.84 ! SC 1.00 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.94 KP 1.02 ! LA 1.23 MK 1.03 NL 1.16 OV 0.92 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.26 HN 0.95 KP 1.02 ! LA 1.02 MK 0.99 OV 0.90 PT 0.87 ! SC 1.01 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.95 KP 1.01 ! LA 1.23 MK 1.10 NL 1.15 OV 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.19 HN 0.95 KP 1.01 ! LA 1.01 MK 1.04 OV 0.90 PT 0.89 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.617088Jy sigma=1.202953 ! Fit after self-cal, rms=0.383959Jy sigma=0.580141 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8101 mas, bmaj=1.98 mas, bpa=-1.044 degrees ! Estimated noise=5.30379 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0343304 Jy ! Component: 100 - total flux cleaned = 0.0374859 Jy ! Component: 150 - total flux cleaned = 0.0388927 Jy ! Component: 200 - total flux cleaned = 0.0388827 Jy ! Total flux subtracted in 200 components = 0.0388827 Jy ! Clean residual min=-0.069569 max=0.072885 Jy/beam ! Clean residual mean=-0.000005 rms=0.019267 Jy/beam ! Combined flux in latest and established models = 4.55931 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 4.55931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.377854Jy sigma=0.576303 ! Fit after self-cal, rms=0.377742Jy sigma=0.574932 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.377742Jy sigma=0.574932 ! Fit after self-cal, rms=0.144988Jy sigma=0.247073 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8101 mas, bmaj=1.981 mas, bpa=-1.016 degrees ! Estimated noise=5.32137 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013016 Jy ! Component: 100 - total flux cleaned = 0.0134855 Jy ! Component: 150 - total flux cleaned = 0.0142739 Jy ! Component: 200 - total flux cleaned = 0.013918 Jy ! Total flux subtracted in 200 components = 0.013918 Jy ! Clean residual min=-0.022446 max=0.059063 Jy/beam ! Clean residual mean=-0.000037 rms=0.006225 Jy/beam ! Combined flux in latest and established models = 4.57323 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 4.57323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139523Jy sigma=0.238865 ! Fit after self-cal, rms=0.139135Jy sigma=0.236714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503408 Jy ! Component: 100 - total flux cleaned = 0.0702666 Jy ! Component: 150 - total flux cleaned = 0.0744003 Jy ! Component: 200 - total flux cleaned = 0.0773099 Jy ! Total flux subtracted in 200 components = 0.0773099 Jy ! Clean residual min=-0.020604 max=0.021989 Jy/beam ! Clean residual mean=0.000011 rms=0.004619 Jy/beam ! Combined flux in latest and established models = 4.65054 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 4.65054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116666Jy sigma=0.200176 ! Fit after self-cal, rms=0.114365Jy sigma=0.196645 ! Inverting map ! Added new window around map position (-3.4, -21.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200488 Jy ! Component: 100 - total flux cleaned = 0.0272206 Jy ! Component: 150 - total flux cleaned = 0.0316451 Jy ! Component: 200 - total flux cleaned = 0.0329248 Jy ! Total flux subtracted in 200 components = 0.0329248 Jy ! Clean residual min=-0.018522 max=0.018906 Jy/beam ! Clean residual mean=0.000016 rms=0.004166 Jy/beam ! Combined flux in latest and established models = 4.68347 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 4.68347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108227Jy sigma=0.186005 ! Fit after self-cal, rms=0.107530Jy sigma=0.185113 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107530Jy sigma=0.185113 ! Fit after self-cal, rms=0.090228Jy sigma=0.159654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8091 mas, bmaj=1.981 mas, bpa=-1.036 degrees ! Estimated noise=5.32237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178172 Jy ! Component: 100 - total flux cleaned = 0.0213628 Jy ! Component: 150 - total flux cleaned = 0.0217897 Jy ! Component: 200 - total flux cleaned = 0.0221549 Jy ! Total flux subtracted in 200 components = 0.0221549 Jy ! Clean residual min=-0.010997 max=0.012562 Jy/beam ! Clean residual mean=-0.000010 rms=0.002475 Jy/beam ! Combined flux in latest and established models = 4.70562 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 4.70562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085130Jy sigma=0.150936 ! Fit after self-cal, rms=0.084542Jy sigma=0.150144 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128858 Jy ! Component: 100 - total flux cleaned = 0.0182445 Jy ! Component: 150 - total flux cleaned = 0.0190923 Jy ! Component: 200 - total flux cleaned = 0.0198505 Jy ! Total flux subtracted in 200 components = 0.0198505 Jy ! Clean residual min=-0.010264 max=0.009272 Jy/beam ! Clean residual mean=-0.000002 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 4.72547 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 4.72547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081639Jy sigma=0.145501 ! Fit after self-cal, rms=0.081430Jy sigma=0.145216 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081430Jy sigma=0.145216 ! Fit after self-cal, rms=0.080193Jy sigma=0.143787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.204 mas, bmaj=3.831 mas, bpa=13.26 degrees ! Estimated noise=7.35392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00773083 Jy ! Component: 100 - total flux cleaned = 0.0102419 Jy ! Component: 150 - total flux cleaned = 0.0111414 Jy ! Component: 200 - total flux cleaned = 0.0119684 Jy ! Total flux subtracted in 200 components = 0.0119684 Jy ! Clean residual min=-0.008254 max=0.010155 Jy/beam ! Clean residual mean=-0.000012 rms=0.002673 Jy/beam ! Combined flux in latest and established models = 4.73744 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 4.73744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079051Jy sigma=0.142617 ! Fit after self-cal, rms=0.078747Jy sigma=0.142151 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339458 Jy ! Component: 100 - total flux cleaned = 0.000780803 Jy ! Component: 150 - total flux cleaned = 0.00136532 Jy ! Component: 200 - total flux cleaned = 0.00147101 Jy ! Total flux subtracted in 200 components = 0.00147101 Jy ! Clean residual min=-0.007932 max=0.009987 Jy/beam ! Clean residual mean=-0.000009 rms=0.002608 Jy/beam ! Combined flux in latest and established models = 4.73891 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 114 components and 4.73891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078487Jy sigma=0.141976 ! Fit after self-cal, rms=0.078387Jy sigma=0.141825 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8085 mas, bmaj=1.98 mas, bpa=-1.05 degrees ! Estimated noise=5.32174 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8085 x 1.98 at -1.05 degrees (North through East) ! Clean map min=-0.0077085 max=4.1548 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078387Jy sigma=0.141825 ! Fit after self-cal, rms=0.066842Jy sigma=0.114386 ! Inverting map and beam ! Estimated beam: bmin=0.8082 mas, bmaj=1.98 mas, bpa=-1.1 degrees ! Estimated noise=5.32097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414833 Jy ! Component: 100 - total flux cleaned = 0.0052306 Jy ! Component: 150 - total flux cleaned = 0.00504233 Jy ! Component: 200 - total flux cleaned = 0.00487653 Jy ! Total flux subtracted in 200 components = 0.00487653 Jy ! Clean residual min=-0.007203 max=0.008266 Jy/beam ! Clean residual mean=-0.000015 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 4.74379 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 126 components and 4.74379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065667Jy sigma=0.111778 ! Fit after self-cal, rms=0.065539Jy sigma=0.111616 ! Inverting map ! Added new window around map position (-11.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624551 Jy ! Component: 100 - total flux cleaned = 0.00769124 Jy ! Component: 150 - total flux cleaned = 0.00842286 Jy ! Component: 200 - total flux cleaned = 0.00792708 Jy ! Total flux subtracted in 200 components = 0.00792708 Jy ! Clean residual min=-0.006278 max=0.006978 Jy/beam ! Clean residual mean=-0.000010 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 4.75171 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 142 components and 4.75171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064218Jy sigma=0.109208 ! Fit after self-cal, rms=0.064154Jy sigma=0.109080 ! Inverting map ! Added new window around map position (-22.4, 20.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00630927 Jy ! Component: 100 - total flux cleaned = 0.00837134 Jy ! Component: 150 - total flux cleaned = 0.00898516 Jy ! Component: 200 - total flux cleaned = 0.00898676 Jy ! Total flux subtracted in 200 components = 0.00898676 Jy ! Clean residual min=-0.006031 max=0.006168 Jy/beam ! Clean residual mean=-0.000005 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 4.7607 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 157 components and 4.7607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063213Jy sigma=0.107273 ! Fit after self-cal, rms=0.063179Jy sigma=0.107205 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063179Jy sigma=0.107205 ! Fit after self-cal, rms=0.062687Jy sigma=0.106702 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.622 mas, bmaj=1.636 mas, bpa=-3.136 degrees ! Estimated noise=6.88664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12477 Jy ! Component: 100 - total flux cleaned = 3.85222 Jy ! Component: 150 - total flux cleaned = 4.15634 Jy ! Component: 200 - total flux cleaned = 4.31412 Jy ! Total flux subtracted in 200 components = 4.31412 Jy ! Clean residual min=-0.031360 max=0.077483 Jy/beam ! Clean residual mean=-0.000019 rms=0.008009 Jy/beam ! Combined flux in latest and established models = 4.31412 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 4.31412 Jy ! Inverting map and beam ! Estimated beam: bmin=0.808 mas, bmaj=1.98 mas, bpa=-1.101 degrees ! Estimated noise=5.3223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144553 Jy ! Component: 100 - total flux cleaned = 0.225668 Jy ! Component: 150 - total flux cleaned = 0.278347 Jy ! Component: 200 - total flux cleaned = 0.31405 Jy ! Total flux subtracted in 200 components = 0.31405 Jy ! Clean residual min=-0.012374 max=0.021532 Jy/beam ! Clean residual mean=-0.000073 rms=0.003641 Jy/beam ! Combined flux in latest and established models = 4.62817 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 46 components and 4.62817 Jy ! Inverting map ! Added new window around map position (0, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025593 Jy ! Component: 100 - total flux cleaned = 0.0441663 Jy ! Component: 150 - total flux cleaned = 0.0587846 Jy ! Component: 200 - total flux cleaned = 0.0709189 Jy ! Total flux subtracted in 200 components = 0.0709189 Jy ! Clean residual min=-0.008741 max=0.010831 Jy/beam ! Clean residual mean=-0.000038 rms=0.002138 Jy/beam ! Combined flux in latest and established models = 4.69909 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 83 components and 4.69909 Jy ! Inverting map ! Added new window around map position (-3.4, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114897 Jy ! Component: 100 - total flux cleaned = 0.0206486 Jy ! Component: 150 - total flux cleaned = 0.0286335 Jy ! Component: 200 - total flux cleaned = 0.0356891 Jy ! Total flux subtracted in 200 components = 0.0356891 Jy ! Clean residual min=-0.006707 max=0.007030 Jy/beam ! Clean residual mean=-0.000020 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 4.73478 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 114 components and 4.73478 Jy ! Inverting map ! Added new window around map position (-9, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711992 Jy ! Component: 100 - total flux cleaned = 0.0128756 Jy ! Component: 150 - total flux cleaned = 0.0173997 Jy ! Component: 200 - total flux cleaned = 0.0205735 Jy ! Total flux subtracted in 200 components = 0.0205735 Jy ! Clean residual min=-0.005861 max=0.006310 Jy/beam ! Clean residual mean=-0.000009 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 4.75536 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 129 components and 4.75535 Jy ! Inverting map ! Added new window around map position (-6.8, 18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567619 Jy ! Component: 100 - total flux cleaned = 0.0093212 Jy ! Component: 150 - total flux cleaned = 0.0114444 Jy ! Component: 200 - total flux cleaned = 0.0128687 Jy ! Total flux subtracted in 200 components = 0.0128687 Jy ! Clean residual min=-0.005671 max=0.005634 Jy/beam ! Clean residual mean=-0.000003 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 4.76822 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 151 components and 4.76822 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.202 mas, bmaj=3.829 mas, bpa=13.22 degrees ! Estimated noise=7.36149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472647 Jy ! Component: 100 - total flux cleaned = 0.00748442 Jy ! Component: 150 - total flux cleaned = 0.00915177 Jy ! Component: 200 - total flux cleaned = 0.0107918 Jy ! Total flux subtracted in 200 components = 0.0107918 Jy ! Clean residual min=-0.006969 max=0.006775 Jy/beam ! Clean residual mean=0.000004 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 4.77901 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108719 Jy ! Component: 100 - total flux cleaned = 0.00190871 Jy ! Component: 150 - total flux cleaned = 0.00268523 Jy ! Component: 200 - total flux cleaned = 0.00323808 Jy ! Total flux subtracted in 200 components = 0.00323808 Jy ! Clean residual min=-0.006669 max=0.006568 Jy/beam ! Clean residual mean=0.000007 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 4.78225 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 179 components and 4.78225 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.808 mas, bmaj=1.98 mas, bpa=-1.101 degrees ! Estimated noise=5.3223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179051 Jy ! Component: 100 - total flux cleaned = -0.00190935 Jy ! Component: 150 - total flux cleaned = -0.00158534 Jy ! Component: 200 - total flux cleaned = -0.00128107 Jy ! Total flux subtracted in 200 components = -0.00128107 Jy ! Clean residual min=-0.004956 max=0.005131 Jy/beam ! Clean residual mean=0.000003 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 4.78097 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 203 components and 4.78097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060016Jy sigma=0.102091 ! Fit after self-cal, rms=0.059744Jy sigma=0.101518 wmodel J0730-1141_X_e_map.mod ! Writing 203 model components to file: J0730-1141_X_e_map.mod wobs J0730-1141_X_e_uvs.fits ! Writing UV FITS file: J0730-1141_X_e_uvs.fits wwins J0730-1141_X_e_map.win ! wwins: Wrote 10 windows to J0730-1141_X_e_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484245 Jy ! Component: 100 - total flux cleaned = 0.000730972 Jy ! Component: 150 - total flux cleaned = 0.0013562 Jy ! Component: 200 - total flux cleaned = 0.00165725 Jy ! Component: 250 - total flux cleaned = 0.00216561 Jy ! Component: 300 - total flux cleaned = 0.00237496 Jy ! Component: 350 - total flux cleaned = 0.00264629 Jy ! Component: 400 - total flux cleaned = 0.00290897 Jy ! Component: 450 - total flux cleaned = 0.00316343 Jy ! Component: 500 - total flux cleaned = 0.00310019 Jy ! Component: 550 - total flux cleaned = 0.0032223 Jy ! Component: 600 - total flux cleaned = 0.00339932 Jy ! Component: 650 - total flux cleaned = 0.00339779 Jy ! Component: 700 - total flux cleaned = 0.00317044 Jy ! Component: 750 - total flux cleaned = 0.00317235 Jy ! Component: 800 - total flux cleaned = 0.00333522 Jy ! Component: 850 - total flux cleaned = 0.00333602 Jy ! Component: 900 - total flux cleaned = 0.00344063 Jy ! Component: 950 - total flux cleaned = 0.0035439 Jy ! Component: 1000 - total flux cleaned = 0.00369694 Jy ! Component: 1050 - total flux cleaned = 0.00379739 Jy ! Component: 1100 - total flux cleaned = 0.0038955 Jy ! Component: 1150 - total flux cleaned = 0.00389584 Jy ! Component: 1200 - total flux cleaned = 0.00394316 Jy ! Component: 1250 - total flux cleaned = 0.0038963 Jy ! Component: 1300 - total flux cleaned = 0.00380525 Jy ! Component: 1350 - total flux cleaned = 0.00394107 Jy ! Component: 1400 - total flux cleaned = 0.00398524 Jy ! Component: 1450 - total flux cleaned = 0.0038532 Jy ! Component: 1500 - total flux cleaned = 0.00393936 Jy ! Component: 1550 - total flux cleaned = 0.00389731 Jy ! Component: 1600 - total flux cleaned = 0.00402319 Jy ! Component: 1650 - total flux cleaned = 0.00410672 Jy ! Component: 1700 - total flux cleaned = 0.00410691 Jy ! Component: 1750 - total flux cleaned = 0.0041867 Jy ! Component: 1800 - total flux cleaned = 0.00398837 Jy ! Component: 1850 - total flux cleaned = 0.00418381 Jy ! Component: 1900 - total flux cleaned = 0.00410588 Jy ! Component: 1950 - total flux cleaned = 0.00410603 Jy ! Component: 2000 - total flux cleaned = 0.00410597 Jy ! Component: 2050 - total flux cleaned = 0.00395705 Jy ! Component: 2100 - total flux cleaned = 0.0040309 Jy ! Component: 2150 - total flux cleaned = 0.00388475 Jy ! Component: 2200 - total flux cleaned = 0.0038126 Jy ! Component: 2250 - total flux cleaned = 0.0037414 Jy ! Component: 2300 - total flux cleaned = 0.00360116 Jy ! Component: 2350 - total flux cleaned = 0.00346186 Jy ! Component: 2400 - total flux cleaned = 0.00336008 Jy ! Component: 2450 - total flux cleaned = 0.00335958 Jy ! Component: 2500 - total flux cleaned = 0.00319167 Jy ! Component: 2550 - total flux cleaned = 0.00312549 Jy ! Component: 2600 - total flux cleaned = 0.0029941 Jy ! Component: 2650 - total flux cleaned = 0.00292885 Jy ! Component: 2700 - total flux cleaned = 0.00279952 Jy ! Component: 2750 - total flux cleaned = 0.00273567 Jy ! Component: 2800 - total flux cleaned = 0.00248367 Jy ! Component: 2850 - total flux cleaned = 0.00248381 Jy ! Component: 2900 - total flux cleaned = 0.00251487 Jy ! Component: 2950 - total flux cleaned = 0.00236189 Jy ! Component: 3000 - total flux cleaned = 0.00236157 Jy ! Component: 3050 - total flux cleaned = 0.00221241 Jy ! Component: 3100 - total flux cleaned = 0.00209329 Jy ! Component: 3150 - total flux cleaned = 0.00197616 Jy ! Component: 3200 - total flux cleaned = 0.00180179 Jy ! Component: 3250 - total flux cleaned = 0.00180218 Jy ! Component: 3300 - total flux cleaned = 0.0017171 Jy ! Component: 3350 - total flux cleaned = 0.00157584 Jy ! Component: 3400 - total flux cleaned = 0.00157544 Jy ! Component: 3450 - total flux cleaned = 0.00143708 Jy ! Component: 3500 - total flux cleaned = 0.0014094 Jy ! Component: 3550 - total flux cleaned = 0.00132791 Jy ! Component: 3600 - total flux cleaned = 0.00135505 Jy ! Component: 3650 - total flux cleaned = 0.00119478 Jy ! Component: 3700 - total flux cleaned = 0.00119477 Jy ! Component: 3750 - total flux cleaned = 0.000958291 Jy ! Component: 3800 - total flux cleaned = 0.000854152 Jy ! Component: 3850 - total flux cleaned = 0.000802641 Jy ! Component: 3900 - total flux cleaned = 0.000777195 Jy ! Component: 3950 - total flux cleaned = 0.000701172 Jy ! Component: 4000 - total flux cleaned = 0.000701044 Jy ! Component: 4050 - total flux cleaned = 0.000601714 Jy ! Total flux subtracted in 4096 components = 0.0005768 Jy ! Clean residual min=-0.001317 max=0.001481 Jy/beam ! Clean residual mean=0.000002 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 4.78155 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 497 components and 4.78155 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0730-1141_X_e_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.808 x 1.98 at -1.101 degrees (North through East) ! Clean map min=-0.0028516 max=4.1556 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0730-1141_X_e_map.fits wmodel /image_prod/ug002_uva//J0730-1141_X_e_map.mod ! Writing 497 model components to file: /image_prod/ug002_uva//J0730-1141_X_e_map.mod wobs /image_prod/ug002_uva//J0730-1141_X_e_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0730-1141_X_e_uvs.fits wwins /image_prod/ug002_uva//J0730-1141_X_e_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0730-1141_X_e_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 4.15558 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000435807 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0314618 0.0314618 0.0629235 0.125847 0.251694 0.503388 1.00678 2.01355 4.0271 8.05421 16.1084 32.2168 64.4337 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 4.155 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 9535.39 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0730-1141_X_e_dfm.log closed on Wed Mar 4 21:50:41 2020