! Started logfile: /image_prod/ug002_uva//J0730-1141_X_b_dfm.log on Wed Mar 4 21:50:21 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0730-1141_X_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0730-1141_X_b_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.811111 visibilities/baseline/integration-bin. ! Found source: J0730-1141 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8760 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0730-1141_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=4.864464Jy sigma=8.159395 ! Fit after self-cal, rms=3.761471Jy sigma=6.198657 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6768 mas, bmaj=1.713 mas, bpa=-1.99 degrees ! Estimated noise=6.35688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.35056 Jy ! Component: 100 - total flux cleaned = 4.15493 Jy ! Total flux subtracted in 100 components = 4.15493 Jy ! Clean residual min=-0.153908 max=0.325526 Jy/beam ! Clean residual mean=0.000394 rms=0.038520 Jy/beam ! Combined flux in latest and established models = 4.15493 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 4.15493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.014104Jy sigma=1.650956 ! Fit after self-cal, rms=1.013718Jy sigma=1.650374 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.339401 Jy ! Component: 100 - total flux cleaned = 0.516579 Jy ! Total flux subtracted in 100 components = 0.516579 Jy ! Clean residual min=-0.140747 max=0.304474 Jy/beam ! Clean residual mean=0.000327 rms=0.033323 Jy/beam ! Combined flux in latest and established models = 4.67151 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 4.67151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.787830Jy sigma=1.416545 ! Fit after self-cal, rms=0.787653Jy sigma=1.416369 ! Inverting map ! Added new window around map position (-1.8, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.282472 Jy ! Component: 100 - total flux cleaned = 0.430202 Jy ! Total flux subtracted in 100 components = 0.430202 Jy ! Clean residual min=-0.128073 max=0.261017 Jy/beam ! Clean residual mean=0.000245 rms=0.028104 Jy/beam ! Combined flux in latest and established models = 5.10171 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 5.10171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.653425Jy sigma=1.195679 ! Fit after self-cal, rms=0.640489Jy sigma=1.174258 ! Inverting map ! Added new window around map position (2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200666 Jy ! Component: 100 - total flux cleaned = 0.326096 Jy ! Total flux subtracted in 100 components = 0.326096 Jy ! Clean residual min=-0.111204 max=0.129804 Jy/beam ! Clean residual mean=0.000179 rms=0.024010 Jy/beam ! Combined flux in latest and established models = 5.4278 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 5.4278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.558950Jy sigma=1.032122 ! Fit after self-cal, rms=0.555387Jy sigma=1.027213 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8542 mas, bmaj=2.014 mas, bpa=-0.9879 degrees ! Estimated noise=4.60542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13236 Jy ! Component: 100 - total flux cleaned = 0.223043 Jy ! Component: 150 - total flux cleaned = 0.268301 Jy ! Component: 200 - total flux cleaned = 0.296541 Jy ! Total flux subtracted in 200 components = 0.296541 Jy ! Clean residual min=-0.124339 max=0.124055 Jy/beam ! Clean residual mean=0.000164 rms=0.027250 Jy/beam ! Combined flux in latest and established models = 5.72434 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 5.72435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.509249Jy sigma=0.959661 ! Fit after self-cal, rms=0.508583Jy sigma=0.958846 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8542 x 2.014 at -0.9879 degrees (North through East) ! Clean map min=-0.12086 max=4.3738 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.99 KP 1.04 ! LA 1.00 MK 1.03 NL 1.20 OV 0.99 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.98 KP 1.03 ! LA 0.97 MK 1.03 NL 1.10 OV 0.99 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.97 KP 1.04 ! LA 0.98 MK 1.02 NL 1.19 OV 1.00 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 0.96 KP 1.04 ! LA 0.98 MK 1.02 NL 1.12 OV 1.00 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.97 KP 1.03 ! LA 0.99 MK 1.02 NL 1.09 OV 1.00 ! PT 0.88 SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.97 KP 1.05 ! LA 0.98 MK 1.04 NL 1.27 OV 1.02 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.99 KP 1.04 ! LA 0.98 MK 1.04 NL 1.16 OV 1.00 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.98 KP 1.03 ! LA 0.96 MK 1.03 NL 1.16 OV 1.02 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.96 KP 1.03 ! LA 1.00 MK 1.04 NL 1.15 OV 1.00 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.98 KP 1.05 ! LA 0.97 MK 1.04 NL 1.16 OV 1.03 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.99 KP 1.04 ! LA 0.98 MK 1.04 NL 1.17 OV 1.01 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.97 KP 1.01 ! LA 0.98 MK 1.04 NL 1.17 OV 1.01 ! PT 0.89 SC 1.02 ! ! ! Fit before self-cal, rms=0.508583Jy sigma=0.958846 ! Fit after self-cal, rms=0.437342Jy sigma=0.701616 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8605 mas, bmaj=2.03 mas, bpa=-0.8662 degrees ! Estimated noise=4.66074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0949008 Jy ! Component: 100 - total flux cleaned = -0.121225 Jy ! Component: 150 - total flux cleaned = -0.146022 Jy ! Component: 200 - total flux cleaned = -0.167576 Jy ! Total flux subtracted in 200 components = -0.167576 Jy ! Clean residual min=-0.081493 max=0.082427 Jy/beam ! Clean residual mean=-0.000162 rms=0.018582 Jy/beam ! Combined flux in latest and established models = 5.55677 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 5.55677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.397619Jy sigma=0.666427 ! Fit after self-cal, rms=0.397173Jy sigma=0.665731 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.397173Jy sigma=0.665731 ! Fit after self-cal, rms=0.272446Jy sigma=0.411789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8609 mas, bmaj=2.024 mas, bpa=-0.9118 degrees ! Estimated noise=4.67897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0915828 Jy ! Component: 100 - total flux cleaned = -0.114367 Jy ! Component: 150 - total flux cleaned = -0.130895 Jy ! Component: 200 - total flux cleaned = -0.142494 Jy ! Total flux subtracted in 200 components = -0.142494 Jy ! Clean residual min=-0.036672 max=0.039069 Jy/beam ! Clean residual mean=-0.000065 rms=0.009092 Jy/beam ! Combined flux in latest and established models = 5.41428 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 80 components and 5.41428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.224055Jy sigma=0.344651 ! Fit after self-cal, rms=0.223805Jy sigma=0.344279 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.6, 19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181452 Jy ! Component: 100 - total flux cleaned = 0.0141485 Jy ! Component: 150 - total flux cleaned = 0.0107618 Jy ! Component: 200 - total flux cleaned = 0.00929403 Jy ! Total flux subtracted in 200 components = 0.00929403 Jy ! Clean residual min=-0.036002 max=0.037010 Jy/beam ! Clean residual mean=-0.000058 rms=0.008572 Jy/beam ! Combined flux in latest and established models = 5.42357 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 5.42357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.213835Jy sigma=0.330261 ! Fit after self-cal, rms=0.213229Jy sigma=0.329259 ! Inverting map ! Added new window around map position (1, -19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286769 Jy ! Component: 100 - total flux cleaned = 0.0295069 Jy ! Component: 150 - total flux cleaned = 0.0273181 Jy ! Component: 200 - total flux cleaned = 0.0247314 Jy ! Total flux subtracted in 200 components = 0.0247314 Jy ! Clean residual min=-0.032240 max=0.034104 Jy/beam ! Clean residual mean=-0.000057 rms=0.008159 Jy/beam ! Combined flux in latest and established models = 5.4483 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 113 components and 5.4483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.205887Jy sigma=0.316600 ! Fit after self-cal, rms=0.205505Jy sigma=0.315660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.205505Jy sigma=0.315660 ! Fit after self-cal, rms=0.159249Jy sigma=0.249439 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8615 mas, bmaj=2.023 mas, bpa=-0.907 degrees ! Estimated noise=4.67634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.038732 Jy ! Component: 100 - total flux cleaned = -0.0621832 Jy ! Component: 150 - total flux cleaned = -0.074375 Jy ! Component: 200 - total flux cleaned = -0.081686 Jy ! Total flux subtracted in 200 components = -0.081686 Jy ! Clean residual min=-0.024497 max=0.021768 Jy/beam ! Clean residual mean=-0.000024 rms=0.005347 Jy/beam ! Combined flux in latest and established models = 5.36661 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 121 components and 5.36661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145753Jy sigma=0.230990 ! Fit after self-cal, rms=0.145568Jy sigma=0.230754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00476705 Jy ! Component: 100 - total flux cleaned = -0.00775572 Jy ! Component: 150 - total flux cleaned = -0.00959984 Jy ! Component: 200 - total flux cleaned = -0.0113132 Jy ! Total flux subtracted in 200 components = -0.0113132 Jy ! Clean residual min=-0.023284 max=0.021081 Jy/beam ! Clean residual mean=-0.000018 rms=0.005173 Jy/beam ! Combined flux in latest and established models = 5.3553 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 133 components and 5.3553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142481Jy sigma=0.225976 ! Fit after self-cal, rms=0.142377Jy sigma=0.225814 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142377Jy sigma=0.225814 ! Fit after self-cal, rms=0.137379Jy sigma=0.217057 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.088 mas, bmaj=3.554 mas, bpa=2.318 degrees ! Estimated noise=6.59877 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0390683 Jy ! Component: 100 - total flux cleaned = -0.0589938 Jy ! Component: 150 - total flux cleaned = -0.062858 Jy ! Component: 200 - total flux cleaned = -0.0665756 Jy ! Total flux subtracted in 200 components = -0.0665756 Jy ! Clean residual min=-0.027944 max=0.025001 Jy/beam ! Clean residual mean=-0.000000 rms=0.007016 Jy/beam ! Combined flux in latest and established models = 5.28872 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 143 components and 5.28872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131006Jy sigma=0.211401 ! Fit after self-cal, rms=0.130794Jy sigma=0.210875 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010496 Jy ! Component: 100 - total flux cleaned = -0.00399006 Jy ! Component: 150 - total flux cleaned = -0.00663297 Jy ! Component: 200 - total flux cleaned = -0.00906599 Jy ! Total flux subtracted in 200 components = -0.00906599 Jy ! Clean residual min=-0.026999 max=0.025014 Jy/beam ! Clean residual mean=0.000009 rms=0.006847 Jy/beam ! Combined flux in latest and established models = 5.27966 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 156 components and 5.27966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.129834Jy sigma=0.210191 ! Fit after self-cal, rms=0.129731Jy sigma=0.209961 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8622 mas, bmaj=2.023 mas, bpa=-0.8562 degrees ! Estimated noise=4.67407 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8622 x 2.023 at -0.8562 degrees (North through East) ! Clean map min=-0.042611 max=4.4653 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.129731Jy sigma=0.209961 ! Fit after self-cal, rms=0.122497Jy sigma=0.191722 ! Inverting map and beam ! Estimated beam: bmin=0.8628 mas, bmaj=2.024 mas, bpa=-0.7609 degrees ! Estimated noise=4.67254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.021577 Jy ! Component: 100 - total flux cleaned = -0.0294978 Jy ! Component: 150 - total flux cleaned = -0.0323141 Jy ! Component: 200 - total flux cleaned = -0.0357388 Jy ! Total flux subtracted in 200 components = -0.0357388 Jy ! Clean residual min=-0.018728 max=0.018566 Jy/beam ! Clean residual mean=0.000004 rms=0.003872 Jy/beam ! Combined flux in latest and established models = 5.24392 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 166 components and 5.24392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117052Jy sigma=0.182603 ! Fit after self-cal, rms=0.116861Jy sigma=0.182382 ! Inverting map ! Added new window around map position (-1.6, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163965 Jy ! Component: 100 - total flux cleaned = 0.0154896 Jy ! Component: 150 - total flux cleaned = 0.0142765 Jy ! Component: 200 - total flux cleaned = 0.0124336 Jy ! Total flux subtracted in 200 components = 0.0124336 Jy ! Clean residual min=-0.016387 max=0.014825 Jy/beam ! Clean residual mean=-0.000004 rms=0.003604 Jy/beam ! Combined flux in latest and established models = 5.25635 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 184 components and 5.25636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112753Jy sigma=0.175652 ! Fit after self-cal, rms=0.112431Jy sigma=0.175226 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112431Jy sigma=0.175226 ! Fit after self-cal, rms=0.109860Jy sigma=0.171958 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6822 mas, bmaj=1.713 mas, bpa=-1.81 degrees ! Estimated noise=6.48945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.41203 Jy ! Component: 100 - total flux cleaned = 4.21422 Jy ! Component: 150 - total flux cleaned = 4.54387 Jy ! Component: 200 - total flux cleaned = 4.71595 Jy ! Total flux subtracted in 200 components = 4.71595 Jy ! Clean residual min=-0.045624 max=0.089434 Jy/beam ! Clean residual mean=0.000100 rms=0.009939 Jy/beam ! Combined flux in latest and established models = 4.71595 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 4.71595 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8632 mas, bmaj=2.024 mas, bpa=-0.7423 degrees ! Estimated noise=4.66887 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160051 Jy ! Component: 100 - total flux cleaned = 0.255113 Jy ! Component: 150 - total flux cleaned = 0.320667 Jy ! Component: 200 - total flux cleaned = 0.368573 Jy ! Total flux subtracted in 200 components = 0.368573 Jy ! Clean residual min=-0.023245 max=0.031680 Jy/beam ! Clean residual mean=0.000062 rms=0.005529 Jy/beam ! Combined flux in latest and established models = 5.08453 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 5.08453 Jy ! Inverting map ! Added new window around map position (1, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.037896 Jy ! Component: 100 - total flux cleaned = 0.0681673 Jy ! Component: 150 - total flux cleaned = 0.0919941 Jy ! Component: 200 - total flux cleaned = 0.100448 Jy ! Total flux subtracted in 200 components = 0.100448 Jy ! Clean residual min=-0.021812 max=0.019633 Jy/beam ! Clean residual mean=0.000015 rms=0.004066 Jy/beam ! Combined flux in latest and established models = 5.18497 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 66 components and 5.18497 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.093 mas, bmaj=3.557 mas, bpa=2.461 degrees ! Estimated noise=6.58113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230226 Jy ! Component: 100 - total flux cleaned = 0.0285456 Jy ! Component: 150 - total flux cleaned = 0.0330198 Jy ! Component: 200 - total flux cleaned = 0.0368325 Jy ! Total flux subtracted in 200 components = 0.0368325 Jy ! Clean residual min=-0.018881 max=0.021505 Jy/beam ! Clean residual mean=-0.000006 rms=0.005138 Jy/beam ! Combined flux in latest and established models = 5.22181 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333424 Jy ! Component: 100 - total flux cleaned = 0.00658816 Jy ! Component: 150 - total flux cleaned = 0.00882178 Jy ! Component: 200 - total flux cleaned = 0.00996433 Jy ! Total flux subtracted in 200 components = 0.00996433 Jy ! Clean residual min=-0.018727 max=0.021437 Jy/beam ! Clean residual mean=-0.000015 rms=0.004931 Jy/beam ! Combined flux in latest and established models = 5.23177 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 107 components and 5.23177 Jy ! Inverting map ! Added new window around map position (-30.6, 34.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00828843 Jy ! Component: 100 - total flux cleaned = 0.00817396 Jy ! Component: 150 - total flux cleaned = 0.00977182 Jy ! Component: 200 - total flux cleaned = 0.0112278 Jy ! Total flux subtracted in 200 components = 0.0112278 Jy ! Clean residual min=-0.016949 max=0.014538 Jy/beam ! Clean residual mean=-0.000019 rms=0.004302 Jy/beam ! Combined flux in latest and established models = 5.243 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 141 components and 5.243 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8632 mas, bmaj=2.024 mas, bpa=-0.7423 degrees ! Estimated noise=4.66887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00376471 Jy ! Component: 100 - total flux cleaned = -0.00425991 Jy ! Component: 150 - total flux cleaned = -0.00522705 Jy ! Component: 200 - total flux cleaned = -0.0048202 Jy ! Total flux subtracted in 200 components = -0.0048202 Jy ! Clean residual min=-0.015095 max=0.014465 Jy/beam ! Clean residual mean=-0.000008 rms=0.003069 Jy/beam ! Combined flux in latest and established models = 5.23818 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 155 components and 5.23818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104269Jy sigma=0.170574 ! Fit after self-cal, rms=0.103130Jy sigma=0.168068 wmodel J0730-1141_X_b_map.mod ! Writing 155 model components to file: J0730-1141_X_b_map.mod wobs J0730-1141_X_b_uvs.fits ! Writing UV FITS file: J0730-1141_X_b_uvs.fits wwins J0730-1141_X_b_map.win ! wwins: Wrote 8 windows to J0730-1141_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00297298 Jy ! Component: 100 - total flux cleaned = -0.00395701 Jy ! Component: 150 - total flux cleaned = -0.00511455 Jy ! Component: 200 - total flux cleaned = -0.0064379 Jy ! Component: 250 - total flux cleaned = -0.00728677 Jy ! Component: 300 - total flux cleaned = -0.00811295 Jy ! Component: 350 - total flux cleaned = -0.00951628 Jy ! Component: 400 - total flux cleaned = -0.00990948 Jy ! Component: 450 - total flux cleaned = -0.0106786 Jy ! Component: 500 - total flux cleaned = -0.0114263 Jy ! Component: 550 - total flux cleaned = -0.0127084 Jy ! Component: 600 - total flux cleaned = -0.0136017 Jy ! Component: 650 - total flux cleaned = -0.0141288 Jy ! Component: 700 - total flux cleaned = -0.0151665 Jy ! Component: 750 - total flux cleaned = -0.0158459 Jy ! Component: 800 - total flux cleaned = -0.016682 Jy ! Component: 850 - total flux cleaned = -0.0175033 Jy ! Component: 900 - total flux cleaned = -0.0184726 Jy ! Component: 950 - total flux cleaned = -0.0194256 Jy ! Component: 1000 - total flux cleaned = -0.0203598 Jy ! Component: 1050 - total flux cleaned = -0.0205164 Jy ! Component: 1100 - total flux cleaned = -0.0218843 Jy ! Component: 1150 - total flux cleaned = -0.0224822 Jy ! Component: 1200 - total flux cleaned = -0.0232198 Jy ! Component: 1250 - total flux cleaned = -0.0238002 Jy ! Component: 1300 - total flux cleaned = -0.0243717 Jy ! Component: 1350 - total flux cleaned = -0.0250785 Jy ! Component: 1400 - total flux cleaned = -0.0260518 Jy ! Component: 1450 - total flux cleaned = -0.026736 Jy ! Component: 1500 - total flux cleaned = -0.0271414 Jy ! Component: 1550 - total flux cleaned = -0.0280717 Jy ! Component: 1600 - total flux cleaned = -0.0285971 Jy ! Component: 1650 - total flux cleaned = -0.0291141 Jy ! Component: 1700 - total flux cleaned = -0.0293733 Jy ! Component: 1750 - total flux cleaned = -0.0302543 Jy ! Component: 1800 - total flux cleaned = -0.0311228 Jy ! Component: 1850 - total flux cleaned = -0.0314891 Jy ! Component: 1900 - total flux cleaned = -0.0318512 Jy ! Component: 1950 - total flux cleaned = -0.0324496 Jy ! Component: 2000 - total flux cleaned = -0.03304 Jy ! Component: 2050 - total flux cleaned = -0.0335052 Jy ! Component: 2100 - total flux cleaned = -0.0339667 Jy ! Component: 2150 - total flux cleaned = -0.0348781 Jy ! Component: 2200 - total flux cleaned = -0.0353267 Jy ! Component: 2250 - total flux cleaned = -0.0353271 Jy ! Component: 2300 - total flux cleaned = -0.0358798 Jy ! Component: 2350 - total flux cleaned = -0.036317 Jy ! Component: 2400 - total flux cleaned = -0.0370694 Jy ! Component: 2450 - total flux cleaned = -0.0370692 Jy ! Component: 2500 - total flux cleaned = -0.037806 Jy ! Component: 2550 - total flux cleaned = -0.0383244 Jy ! Component: 2600 - total flux cleaned = -0.0384261 Jy ! Component: 2650 - total flux cleaned = -0.0390366 Jy ! Component: 2700 - total flux cleaned = -0.0392382 Jy ! Component: 2750 - total flux cleaned = -0.0390381 Jy ! Component: 2800 - total flux cleaned = -0.039728 Jy ! Component: 2850 - total flux cleaned = -0.0399221 Jy ! Component: 2900 - total flux cleaned = -0.0396346 Jy ! Component: 2950 - total flux cleaned = -0.0404922 Jy ! Component: 3000 - total flux cleaned = -0.0406808 Jy ! Component: 3050 - total flux cleaned = -0.0404943 Jy ! Component: 3100 - total flux cleaned = -0.0415101 Jy ! Component: 3150 - total flux cleaned = -0.0416004 Jy ! Component: 3200 - total flux cleaned = -0.0414183 Jy ! Component: 3250 - total flux cleaned = -0.0420468 Jy ! Component: 3300 - total flux cleaned = -0.042048 Jy ! Component: 3350 - total flux cleaned = -0.0424869 Jy ! Component: 3400 - total flux cleaned = -0.0428342 Jy ! Component: 3450 - total flux cleaned = -0.0429204 Jy ! Component: 3500 - total flux cleaned = -0.0433482 Jy ! Component: 3550 - total flux cleaned = -0.0436013 Jy ! Component: 3600 - total flux cleaned = -0.0437693 Jy ! Component: 3650 - total flux cleaned = -0.0440174 Jy ! Component: 3700 - total flux cleaned = -0.0445088 Jy ! Component: 3750 - total flux cleaned = -0.0446713 Jy ! Component: 3800 - total flux cleaned = -0.0450732 Jy ! Component: 3850 - total flux cleaned = -0.0453927 Jy ! Component: 3900 - total flux cleaned = -0.0459437 Jy ! Component: 3950 - total flux cleaned = -0.0460997 Jy ! Component: 4000 - total flux cleaned = -0.0462555 Jy ! Component: 4050 - total flux cleaned = -0.0465635 Jy ! Total flux subtracted in 4096 components = -0.0465633 Jy ! Clean residual min=-0.003867 max=0.004428 Jy/beam ! Clean residual mean=0.000004 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 5.19162 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 452 components and 5.19162 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0730-1141_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8632 x 2.024 at -0.7423 degrees (North through East) ! Clean map min=-0.018471 max=4.4909 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0730-1141_X_b_map.fits wmodel /image_prod/ug002_uva//J0730-1141_X_b_map.mod ! Writing 452 model components to file: /image_prod/ug002_uva//J0730-1141_X_b_map.mod wobs /image_prod/ug002_uva//J0730-1141_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0730-1141_X_b_uvs.fits wwins /image_prod/ug002_uva//J0730-1141_X_b_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J0730-1141_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 4.49086 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00133226 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0889984 0.0889984 0.177997 0.355994 0.711987 1.42397 2.84795 5.6959 11.3918 22.7836 45.5672 91.1343 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak= ", int(1000*peak_flux)/1000 ! peak= 4.49 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3370.85 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0730-1141_X_b_dfm.log closed on Wed Mar 4 21:50:25 2020