! Started logfile: /image_prod/ug002_uva//J0726+7911_S_h_dfm.log on Wed Mar  4 21:47:04 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0726+7911_S_h_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0726+7911_S_h_uva.fits
! AN table 1: 8 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.916667 visibilities/baseline/integration-bin.
! Found source: J0726+7911
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 990 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0726+7911_S_h]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.246561Jy  sigma=11.540916
! Fit after  self-cal, rms=0.332414Jy  sigma=3.058688
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.706 mas, bmaj=10.33 mas, bpa=55.63 degrees
! Estimated noise=3.3193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.535632 Jy
! Component: 100  -  total flux cleaned = 0.655397 Jy
! Total flux subtracted in 100 components = 0.655397 Jy
! Clean residual min=-0.028246 max=0.047440 Jy/beam
! Clean residual mean=-0.000192 rms=0.009825 Jy/beam
! Combined flux in latest and established models = 0.655397 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.655397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.197599Jy  sigma=1.251111
! Fit after  self-cal, rms=0.197591Jy  sigma=1.251028
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.158 mas, bmaj=10.92 mas, bpa=55.48 degrees
! Estimated noise=2.4955 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0532215 Jy
! Component: 100  -  total flux cleaned = 0.0776619 Jy
! Component: 150  -  total flux cleaned = 0.0828155 Jy
! Component: 200  -  total flux cleaned = 0.0821324 Jy
! Total flux subtracted in 200 components = 0.0821324 Jy
! Clean residual min=-0.021905 max=0.025114 Jy/beam
! Clean residual mean=-0.000060 rms=0.005750 Jy/beam
! Combined flux in latest and established models = 0.737529 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 34 components and 0.737529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.177288Jy  sigma=1.044150
! Fit after  self-cal, rms=0.177288Jy  sigma=1.043936
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.158 x 10.92 at 55.48 degrees (North through East)
! Clean map  min=-0.020529  max=0.70678 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.06     KP        0.98     
!   LA        1.00     MK        1.08     NL        0.96     OV        0.99     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        1.12     KP        0.97     
!   LA        1.01     MK        1.09     NL        1.05     OV        1.01     
!   PT        1.00     SC        0.54     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.08     KP        0.92     
!   LA        0.99     MK        1.09     NL        0.92     OV        0.99     
!   PT        1.00     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.177288Jy  sigma=1.043936
! Fit after  self-cal, rms=0.076309Jy  sigma=0.659028
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.163 mas, bmaj=11.07 mas, bpa=55.39 degrees
! Estimated noise=2.46997 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153741 Jy
! Component: 100  -  total flux cleaned = 0.0020993 Jy
! Component: 150  -  total flux cleaned = 0.00254336 Jy
! Component: 200  -  total flux cleaned = 0.00290724 Jy
! Total flux subtracted in 200 components = 0.00290724 Jy
! Clean residual min=-0.007137 max=0.008407 Jy/beam
! Clean residual mean=-0.000028 rms=0.002031 Jy/beam
! Combined flux in latest and established models = 0.740436 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 56 components and 0.740436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074517Jy  sigma=0.645188
! Fit after  self-cal, rms=0.074474Jy  sigma=0.644708
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074474Jy  sigma=0.644708
! Fit after  self-cal, rms=0.074052Jy  sigma=0.642359
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.161 mas, bmaj=11.09 mas, bpa=55.33 degrees
! Estimated noise=2.47598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186174 Jy
! Component: 100  -  total flux cleaned = 0.00224431 Jy
! Component: 150  -  total flux cleaned = 0.00226203 Jy
! Component: 200  -  total flux cleaned = 0.00226493 Jy
! Total flux subtracted in 200 components = 0.00226493 Jy
! Clean residual min=-0.006219 max=0.007085 Jy/beam
! Clean residual mean=-0.000030 rms=0.001803 Jy/beam
! Combined flux in latest and established models = 0.742701 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 66 components and 0.742701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073229Jy  sigma=0.635982
! Fit after  self-cal, rms=0.073222Jy  sigma=0.635917
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000290323 Jy
! Component: 100  -  total flux cleaned = -0.00079779 Jy
! Component: 150  -  total flux cleaned = -0.00107519 Jy
! Component: 200  -  total flux cleaned = -0.0013345 Jy
! Total flux subtracted in 200 components = -0.0013345 Jy
! Clean residual min=-0.006134 max=0.006636 Jy/beam
! Clean residual mean=-0.000034 rms=0.001755 Jy/beam
! Combined flux in latest and established models = 0.741367 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 82 components and 0.741367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072934Jy  sigma=0.634132
! Fit after  self-cal, rms=0.072932Jy  sigma=0.634101
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072932Jy  sigma=0.634101
! Fit after  self-cal, rms=0.072514Jy  sigma=0.632331
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=11.1 mas, bpa=55.29 degrees
! Estimated noise=2.47863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172182 Jy
! Component: 100  -  total flux cleaned = 0.00173322 Jy
! Component: 150  -  total flux cleaned = 0.00164431 Jy
! Component: 200  -  total flux cleaned = 0.00156443 Jy
! Total flux subtracted in 200 components = 0.00156443 Jy
! Clean residual min=-0.005687 max=0.006081 Jy/beam
! Clean residual mean=-0.000032 rms=0.001625 Jy/beam
! Combined flux in latest and established models = 0.742931 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 0.742931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072196Jy  sigma=0.629828
! Fit after  self-cal, rms=0.072196Jy  sigma=0.629811
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000139471 Jy
! Component: 100  -  total flux cleaned = -0.000341238 Jy
! Component: 150  -  total flux cleaned = -0.000526605 Jy
! Component: 200  -  total flux cleaned = -0.000754576 Jy
! Total flux subtracted in 200 components = -0.000754576 Jy
! Clean residual min=-0.005639 max=0.006062 Jy/beam
! Clean residual mean=-0.000035 rms=0.001604 Jy/beam
! Combined flux in latest and established models = 0.742177 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 96 components and 0.742177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072075Jy  sigma=0.628995
! Fit after  self-cal, rms=0.072077Jy  sigma=0.628987
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072077Jy  sigma=0.628987
! Fit after  self-cal, rms=0.071837Jy  sigma=0.628236
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.18 mas, bmaj=12.92 mas, bpa=52.84 degrees
! Estimated noise=3.00809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.23891e-05 Jy
! Component: 100  -  total flux cleaned = 3.20393e-05 Jy
! Component: 150  -  total flux cleaned = 0.000137016 Jy
! Component: 200  -  total flux cleaned = 0.000200487 Jy
! Total flux subtracted in 200 components = 0.000200487 Jy
! Clean residual min=-0.005065 max=0.006371 Jy/beam
! Clean residual mean=-0.000078 rms=0.001667 Jy/beam
! Combined flux in latest and established models = 0.742377 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 112 components and 0.742377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071816Jy  sigma=0.628151
! Fit after  self-cal, rms=0.071816Jy  sigma=0.628120
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117371 Jy
! Component: 100  -  total flux cleaned = -8.82748e-06 Jy
! Component: 150  -  total flux cleaned = 1.63789e-05 Jy
! Component: 200  -  total flux cleaned = -6.21302e-06 Jy
! Total flux subtracted in 200 components = -6.21302e-06 Jy
! Clean residual min=-0.005005 max=0.006376 Jy/beam
! Clean residual mean=-0.000078 rms=0.001661 Jy/beam
! Combined flux in latest and established models = 0.742371 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 120 components and 0.742371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071807Jy  sigma=0.628053
! Fit after  self-cal, rms=0.071808Jy  sigma=0.628044
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.152 mas, bmaj=11.1 mas, bpa=55.27 degrees
! Estimated noise=2.47967 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.152 x 11.1 at 55.27 degrees (North through East)
! Clean map  min=-0.0053709  max=0.70245 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071808Jy  sigma=0.628044
! Fit after  self-cal, rms=0.068987Jy  sigma=0.599052
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=11.11 mas, bpa=55.25 degrees
! Estimated noise=2.4842 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145325 Jy
! Component: 100  -  total flux cleaned = 0.00131182 Jy
! Component: 150  -  total flux cleaned = 0.00119007 Jy
! Component: 200  -  total flux cleaned = 0.00113492 Jy
! Total flux subtracted in 200 components = 0.00113492 Jy
! Clean residual min=-0.005465 max=0.005915 Jy/beam
! Clean residual mean=-0.000030 rms=0.001527 Jy/beam
! Combined flux in latest and established models = 0.743506 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 124 components and 0.743506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068848Jy  sigma=0.597926
! Fit after  self-cal, rms=0.068848Jy  sigma=0.597918
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104176 Jy
! Component: 100  -  total flux cleaned = -0.000150447 Jy
! Component: 150  -  total flux cleaned = -0.000151868 Jy
! Component: 200  -  total flux cleaned = -0.000234548 Jy
! Total flux subtracted in 200 components = -0.000234548 Jy
! Clean residual min=-0.005445 max=0.005908 Jy/beam
! Clean residual mean=-0.000030 rms=0.001516 Jy/beam
! Combined flux in latest and established models = 0.743271 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 128 components and 0.743272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068797Jy  sigma=0.597417
! Fit after  self-cal, rms=0.068795Jy  sigma=0.597411
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068795Jy  sigma=0.597411
! Fit after  self-cal, rms=0.068679Jy  sigma=0.597115
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.709 mas, bmaj=10.51 mas, bpa=55.38 degrees
! Estimated noise=3.34412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.539616 Jy
! Component: 100  -  total flux cleaned = 0.660772 Jy
! Component: 150  -  total flux cleaned = 0.706823 Jy
! Component: 200  -  total flux cleaned = 0.729585 Jy
! Total flux subtracted in 200 components = 0.729585 Jy
! Clean residual min=-0.010601 max=0.011644 Jy/beam
! Clean residual mean=-0.000047 rms=0.002914 Jy/beam
! Combined flux in latest and established models = 0.729584 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.729584 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.149 mas, bmaj=11.11 mas, bpa=55.24 degrees
! Estimated noise=2.48505 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108146 Jy
! Component: 100  -  total flux cleaned = 0.0139249 Jy
! Component: 150  -  total flux cleaned = 0.0141046 Jy
! Component: 200  -  total flux cleaned = 0.0138189 Jy
! Total flux subtracted in 200 components = 0.0138189 Jy
! Clean residual min=-0.006137 max=0.006556 Jy/beam
! Clean residual mean=-0.000032 rms=0.001686 Jy/beam
! Combined flux in latest and established models = 0.743403 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.743403 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.178 mas, bmaj=12.92 mas, bpa=52.82 degrees
! Estimated noise=3.01716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000560181 Jy
! Component: 100  -  total flux cleaned = 0.000555648 Jy
! Component: 150  -  total flux cleaned = 0.000670226 Jy
! Component: 200  -  total flux cleaned = 0.000721572 Jy
! Total flux subtracted in 200 components = 0.000721572 Jy
! Clean residual min=-0.005283 max=0.005982 Jy/beam
! Clean residual mean=-0.000064 rms=0.001642 Jy/beam
! Combined flux in latest and established models = 0.744125 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.36514e-05 Jy
! Component: 100  -  total flux cleaned = 4.58254e-05 Jy
! Component: 150  -  total flux cleaned = 4.46345e-05 Jy
! Component: 200  -  total flux cleaned = 4.50405e-05 Jy
! Total flux subtracted in 200 components = 4.50405e-05 Jy
! Clean residual min=-0.005104 max=0.006064 Jy/beam
! Clean residual mean=-0.000064 rms=0.001627 Jy/beam
! Combined flux in latest and established models = 0.74417 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 45 components and 0.74417 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.149 mas, bmaj=11.11 mas, bpa=55.24 degrees
! Estimated noise=2.48505 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000978125 Jy
! Component: 100  -  total flux cleaned = -0.00145283 Jy
! Component: 150  -  total flux cleaned = -0.00135716 Jy
! Component: 200  -  total flux cleaned = -0.0013592 Jy
! Total flux subtracted in 200 components = -0.0013592 Jy
! Clean residual min=-0.005413 max=0.006114 Jy/beam
! Clean residual mean=-0.000033 rms=0.001579 Jy/beam
! Combined flux in latest and established models = 0.742811 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.742811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069069Jy  sigma=0.600480
! Fit after  self-cal, rms=0.069057Jy  sigma=0.600310
wmodel J0726+7911_S_h_map.mod
! Writing 57 model components to file: J0726+7911_S_h_map.mod
wobs   J0726+7911_S_h_uvs.fits
! Writing UV FITS file: J0726+7911_S_h_uvs.fits
wwins  J0726+7911_S_h_map.win
! wwins: Wrote 1 windows to J0726+7911_S_h_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000405273 Jy
! Component: 100  -  total flux cleaned = 0.000111117 Jy
! Component: 150  -  total flux cleaned = -7.14188e-05 Jy
! Component: 200  -  total flux cleaned = -0.000246132 Jy
! Component: 250  -  total flux cleaned = -0.000498111 Jy
! Component: 300  -  total flux cleaned = -0.000656529 Jy
! Component: 350  -  total flux cleaned = -0.000582197 Jy
! Component: 400  -  total flux cleaned = -0.000365419 Jy
! Component: 450  -  total flux cleaned = -8.81559e-05 Jy
! Component: 500  -  total flux cleaned = -8.88862e-05 Jy
! Component: 550  -  total flux cleaned = 0.000104771 Jy
! Component: 600  -  total flux cleaned = 0.000104372 Jy
! Component: 650  -  total flux cleaned = 0.00035132 Jy
! Component: 700  -  total flux cleaned = 0.000410832 Jy
! Component: 750  -  total flux cleaned = 0.000410711 Jy
! Component: 800  -  total flux cleaned = 0.000526025 Jy
! Component: 850  -  total flux cleaned = 0.000581682 Jy
! Component: 900  -  total flux cleaned = 0.000691132 Jy
! Component: 950  -  total flux cleaned = 0.000636802 Jy
! Component: 1000  -  total flux cleaned = 0.00074275 Jy
! Component: 1050  -  total flux cleaned = 0.000690705 Jy
! Component: 1100  -  total flux cleaned = 0.000843521 Jy
! Component: 1150  -  total flux cleaned = 0.00104223 Jy
! Component: 1200  -  total flux cleaned = 0.00128651 Jy
! Component: 1250  -  total flux cleaned = 0.00147845 Jy
! Component: 1300  -  total flux cleaned = 0.00162097 Jy
! Component: 1350  -  total flux cleaned = 0.00185509 Jy
! Component: 1400  -  total flux cleaned = 0.00213005 Jy
! Component: 1450  -  total flux cleaned = 0.00226548 Jy
! Component: 1500  -  total flux cleaned = 0.00262089 Jy
! Component: 1550  -  total flux cleaned = 0.00279563 Jy
! Component: 1600  -  total flux cleaned = 0.00305309 Jy
! Component: 1650  -  total flux cleaned = 0.00317974 Jy
! Component: 1700  -  total flux cleaned = 0.0033469 Jy
! Component: 1750  -  total flux cleaned = 0.00351163 Jy
! Component: 1800  -  total flux cleaned = 0.00359317 Jy
! Component: 1850  -  total flux cleaned = 0.00383413 Jy
! Component: 1900  -  total flux cleaned = 0.00391294 Jy
! Component: 1950  -  total flux cleaned = 0.00395172 Jy
! Component: 2000  -  total flux cleaned = 0.00418247 Jy
! Component: 2050  -  total flux cleaned = 0.00433491 Jy
! Component: 2100  -  total flux cleaned = 0.00452292 Jy
! Component: 2150  -  total flux cleaned = 0.00467165 Jy
! Component: 2200  -  total flux cleaned = 0.00489171 Jy
! Component: 2250  -  total flux cleaned = 0.00514496 Jy
! Component: 2300  -  total flux cleaned = 0.00532349 Jy
! Component: 2350  -  total flux cleaned = 0.00546483 Jy
! Component: 2400  -  total flux cleaned = 0.00564005 Jy
! Component: 2450  -  total flux cleaned = 0.00577887 Jy
! Component: 2500  -  total flux cleaned = 0.0058823 Jy
! Component: 2550  -  total flux cleaned = 0.0062205 Jy
! Component: 2600  -  total flux cleaned = 0.00628749 Jy
! Component: 2650  -  total flux cleaned = 0.00651968 Jy
! Component: 2700  -  total flux cleaned = 0.00658594 Jy
! Component: 2750  -  total flux cleaned = 0.00691059 Jy
! Component: 2800  -  total flux cleaned = 0.00707127 Jy
! Component: 2850  -  total flux cleaned = 0.00723006 Jy
! Component: 2900  -  total flux cleaned = 0.00745043 Jy
! Component: 2950  -  total flux cleaned = 0.00757559 Jy
! Component: 3000  -  total flux cleaned = 0.00776117 Jy
! Component: 3050  -  total flux cleaned = 0.0078224 Jy
! Component: 3100  -  total flux cleaned = 0.00806559 Jy
! Component: 3150  -  total flux cleaned = 0.00833622 Jy
! Component: 3200  -  total flux cleaned = 0.0082467 Jy
! Component: 3250  -  total flux cleaned = 0.00851309 Jy
! Component: 3300  -  total flux cleaned = 0.00860107 Jy
! Component: 3350  -  total flux cleaned = 0.00871687 Jy
! Component: 3400  -  total flux cleaned = 0.00883256 Jy
! Component: 3450  -  total flux cleaned = 0.00903244 Jy
! Component: 3500  -  total flux cleaned = 0.00917391 Jy
! Component: 3550  -  total flux cleaned = 0.00928597 Jy
! Component: 3600  -  total flux cleaned = 0.00928615 Jy
! Component: 3650  -  total flux cleaned = 0.00945207 Jy
! Component: 3700  -  total flux cleaned = 0.00958916 Jy
! Component: 3750  -  total flux cleaned = 0.00964346 Jy
! Component: 3800  -  total flux cleaned = 0.00977803 Jy
! Component: 3850  -  total flux cleaned = 0.00980499 Jy
! Component: 3900  -  total flux cleaned = 0.0100173 Jy
! Component: 3950  -  total flux cleaned = 0.0101223 Jy
! Component: 4000  -  total flux cleaned = 0.0102006 Jy
! Component: 4050  -  total flux cleaned = 0.0103043 Jy
! Total flux subtracted in 4096 components = 0.0104845 Jy
! Clean residual min=-0.001407 max=0.001422 Jy/beam
! Clean residual mean=-0.000003 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.753295 Jy
keep
! Adding 256 model components to the UV plane model.
! The established model now contains 313 components and 0.753295 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0726+7911_S_h_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.149 x 11.11 at 55.24 degrees (North through East)
! Clean map  min=-0.0032671  max=0.70305 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0726+7911_S_h_map.fits
wmodel /image_prod/ug002_uva//J0726+7911_S_h_map.mod
! Writing 313 model components to file: /image_prod/ug002_uva//J0726+7911_S_h_map.mod
wobs   /image_prod/ug002_uva//J0726+7911_S_h_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0726+7911_S_h_uvs.fits
wwins  /image_prod/ug002_uva//J0726+7911_S_h_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0726+7911_S_h_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.703049 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000459336 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.196004 0.196004 0.392009 0.784018 1.56804 3.13607 6.27214 12.5443 25.0886 50.1772
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.703 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1530.58 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0726+7911_S_h_dfm.log closed on Wed Mar  4 21:47:07 2020