! Started logfile: /image_prod/ug002_uva//J0721-3528_S_dfm.log on Wed Mar  4 21:45:12 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0721-3528_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0721-3528_S_uva.fits
! AN table 1: 76 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J0721-3528
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2850 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0721-3528_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004671Jy  sigma=7.561929
! Fit after  self-cal, rms=0.932590Jy  sigma=7.032129
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.167 mas, bmaj=35.39 mas, bpa=-15.04 degrees
! Estimated noise=2.59967 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0493226 Jy
! Component: 100  -  total flux cleaned = 0.0679252 Jy
! Total flux subtracted in 100 components = 0.0679252 Jy
! Clean residual min=-0.004950 max=0.007611 Jy/beam
! Clean residual mean=-0.000045 rms=0.001673 Jy/beam
! Combined flux in latest and established models = 0.0679253 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0679253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059990Jy  sigma=0.442517
! Fit after  self-cal, rms=0.059489Jy  sigma=0.438836
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.372 mas, bmaj=35.9 mas, bpa=-14.61 degrees
! Estimated noise=1.77013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00893249 Jy
! Component: 100  -  total flux cleaned = 0.0119653 Jy
! Component: 150  -  total flux cleaned = 0.0126176 Jy
! Component: 200  -  total flux cleaned = 0.0126235 Jy
! Total flux subtracted in 200 components = 0.0126235 Jy
! Clean residual min=-0.002816 max=0.002418 Jy/beam
! Clean residual mean=0.000020 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.0805487 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 73 components and 0.0805488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058321Jy  sigma=0.430308
! Fit after  self-cal, rms=0.058308Jy  sigma=0.430229
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.372 x 35.9 at -14.61 degrees (North through East)
! Clean map  min=-0.0028215  max=0.06648 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     KP        1.05     LA        1.01     MK        1.01     
!   OV        1.02     PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        0.98     LA        0.98     MK        1.02     
!   OV        1.00     PT        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     KP        0.96     LA        0.95     MK        0.98     
!   OV        1.01     PT        0.97     
! 
! 
! Fit before self-cal, rms=0.058308Jy  sigma=0.430229
! Fit after  self-cal, rms=0.058111Jy  sigma=0.429290
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.38 mas, bmaj=35.95 mas, bpa=-14.59 degrees
! Estimated noise=1.76355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132189 Jy
! Component: 100  -  total flux cleaned = -0.000302699 Jy
! Component: 150  -  total flux cleaned = -0.000422763 Jy
! Component: 200  -  total flux cleaned = -0.000503155 Jy
! Total flux subtracted in 200 components = -0.000503155 Jy
! Clean residual min=-0.003098 max=0.002328 Jy/beam
! Clean residual mean=0.000021 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.0800456 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 83 components and 0.0800456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058076Jy  sigma=0.429003
! Fit after  self-cal, rms=0.058098Jy  sigma=0.428808
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058098Jy  sigma=0.428808
! Fit after  self-cal, rms=0.058260Jy  sigma=0.427825
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.358 mas, bmaj=36.1 mas, bpa=-14.62 degrees
! Estimated noise=1.76322 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00021963 Jy
! Component: 100  -  total flux cleaned = -0.0003223 Jy
! Component: 150  -  total flux cleaned = -0.000456057 Jy
! Component: 200  -  total flux cleaned = -0.00051568 Jy
! Total flux subtracted in 200 components = -0.00051568 Jy
! Clean residual min=-0.003146 max=0.002038 Jy/beam
! Clean residual mean=0.000022 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.0795299 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.07953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058240Jy  sigma=0.427669
! Fit after  self-cal, rms=0.058246Jy  sigma=0.427605
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.18588e-06 Jy
! Component: 100  -  total flux cleaned = -0.000113234 Jy
! Component: 150  -  total flux cleaned = -0.000170463 Jy
! Component: 200  -  total flux cleaned = -0.000188358 Jy
! Total flux subtracted in 200 components = -0.000188358 Jy
! Clean residual min=-0.003185 max=0.002043 Jy/beam
! Clean residual mean=0.000021 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.0793416 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 111 components and 0.0793416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058233Jy  sigma=0.427502
! Fit after  self-cal, rms=0.058233Jy  sigma=0.427487
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058233Jy  sigma=0.427487
! Fit after  self-cal, rms=0.058380Jy  sigma=0.427471
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.327 mas, bmaj=36.1 mas, bpa=-14.65 degrees
! Estimated noise=1.76318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000191976 Jy
! Component: 100  -  total flux cleaned = 0.000135732 Jy
! Component: 150  -  total flux cleaned = 8.39647e-05 Jy
! Component: 200  -  total flux cleaned = 5.22262e-05 Jy
! Total flux subtracted in 200 components = 5.22262e-05 Jy
! Clean residual min=-0.003175 max=0.001971 Jy/beam
! Clean residual mean=0.000020 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.0793938 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 122 components and 0.0793938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058369Jy  sigma=0.427386
! Fit after  self-cal, rms=0.058374Jy  sigma=0.427367
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.87321e-05 Jy
! Component: 100  -  total flux cleaned = -7.51652e-05 Jy
! Component: 150  -  total flux cleaned = -0.000124004 Jy
! Component: 200  -  total flux cleaned = -0.000153496 Jy
! Total flux subtracted in 200 components = -0.000153496 Jy
! Clean residual min=-0.003159 max=0.001990 Jy/beam
! Clean residual mean=0.000019 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.0792403 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 133 components and 0.0792403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058366Jy  sigma=0.427294
! Fit after  self-cal, rms=0.058366Jy  sigma=0.427282
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058366Jy  sigma=0.427282
! Fit after  self-cal, rms=0.058254Jy  sigma=0.427278
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.94 mas, bmaj=45.93 mas, bpa=-2.429 degrees
! Estimated noise=1.98896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271122 Jy
! Component: 100  -  total flux cleaned = 0.000266425 Jy
! Component: 150  -  total flux cleaned = 0.000217759 Jy
! Component: 200  -  total flux cleaned = 0.000174332 Jy
! Total flux subtracted in 200 components = 0.000174332 Jy
! Clean residual min=-0.003071 max=0.002202 Jy/beam
! Clean residual mean=0.000024 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.0794147 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 157 components and 0.0794147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058250Jy  sigma=0.427261
! Fit after  self-cal, rms=0.058248Jy  sigma=0.427254
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.65671e-05 Jy
! Component: 100  -  total flux cleaned = -6.36873e-05 Jy
! Component: 150  -  total flux cleaned = -0.000110868 Jy
! Component: 200  -  total flux cleaned = -0.000144325 Jy
! Total flux subtracted in 200 components = -0.000144325 Jy
! Clean residual min=-0.003066 max=0.002168 Jy/beam
! Clean residual mean=0.000023 rms=0.000824 Jy/beam
! Combined flux in latest and established models = 0.0792703 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 171 components and 0.0792703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058246Jy  sigma=0.427244
! Fit after  self-cal, rms=0.058244Jy  sigma=0.427241
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.283 mas, bmaj=36.06 mas, bpa=-14.68 degrees
! Estimated noise=1.75757 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.283 x 36.06 at -14.68 degrees (North through East)
! Clean map  min=-0.0031164  max=0.065894 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.126 mas, bmaj=35.77 mas, bpa=-15.08 degrees
! Estimated noise=2.55057 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0489139 Jy
! Component: 100  -  total flux cleaned = 0.0679202 Jy
! Component: 150  -  total flux cleaned = 0.0760605 Jy
! Component: 200  -  total flux cleaned = 0.0801792 Jy
! Total flux subtracted in 200 components = 0.0801792 Jy
! Clean residual min=-0.004463 max=0.003200 Jy/beam
! Clean residual mean=0.000011 rms=0.001072 Jy/beam
! Combined flux in latest and established models = 0.0801792 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.0801792 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.283 mas, bmaj=36.06 mas, bpa=-14.68 degrees
! Estimated noise=1.75757 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00050953 Jy
! Component: 100  -  total flux cleaned = 0.000512385 Jy
! Component: 150  -  total flux cleaned = 0.000352208 Jy
! Component: 200  -  total flux cleaned = 0.000173405 Jy
! Total flux subtracted in 200 components = 0.000173405 Jy
! Clean residual min=-0.003320 max=0.002246 Jy/beam
! Clean residual mean=0.000023 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.0803526 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 56 components and 0.0803526 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.94 mas, bmaj=45.93 mas, bpa=-2.429 degrees
! Estimated noise=1.98896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000237606 Jy
! Component: 100  -  total flux cleaned = 6.96049e-05 Jy
! Component: 150  -  total flux cleaned = -9.88422e-05 Jy
! Component: 200  -  total flux cleaned = -0.000232611 Jy
! Total flux subtracted in 200 components = -0.000232611 Jy
! Clean residual min=-0.002915 max=0.002308 Jy/beam
! Clean residual mean=0.000030 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.08012 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120144 Jy
! Component: 100  -  total flux cleaned = -0.00022834 Jy
! Component: 150  -  total flux cleaned = -0.000326342 Jy
! Component: 200  -  total flux cleaned = -0.000403757 Jy
! Total flux subtracted in 200 components = -0.000403757 Jy
! Clean residual min=-0.002979 max=0.002238 Jy/beam
! Clean residual mean=0.000027 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 0.0797163 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 80 components and 0.0797162 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.283 mas, bmaj=36.06 mas, bpa=-14.68 degrees
! Estimated noise=1.75757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000333433 Jy
! Component: 100  -  total flux cleaned = -0.000408715 Jy
! Component: 150  -  total flux cleaned = -0.000431034 Jy
! Component: 200  -  total flux cleaned = -0.000430091 Jy
! Total flux subtracted in 200 components = -0.000430091 Jy
! Clean residual min=-0.003265 max=0.002057 Jy/beam
! Clean residual mean=0.000017 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.0792862 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 96 components and 0.0792862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058247Jy  sigma=0.427291
! Fit after  self-cal, rms=0.058242Jy  sigma=0.427258
wmodel J0721-3528_S_map.mod
! Writing 96 model components to file: J0721-3528_S_map.mod
wobs   J0721-3528_S_uvs.fits
! Writing UV FITS file: J0721-3528_S_uvs.fits
wwins  J0721-3528_S_map.win
! wwins: Wrote 1 windows to J0721-3528_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012898 Jy
! Component: 100  -  total flux cleaned = -0.00203207 Jy
! Component: 150  -  total flux cleaned = -0.00234755 Jy
! Component: 200  -  total flux cleaned = -0.00246161 Jy
! Component: 250  -  total flux cleaned = -0.00251448 Jy
! Component: 300  -  total flux cleaned = -0.00246673 Jy
! Component: 350  -  total flux cleaned = -0.00244448 Jy
! Component: 400  -  total flux cleaned = -0.00242335 Jy
! Component: 450  -  total flux cleaned = -0.00242326 Jy
! Component: 500  -  total flux cleaned = -0.00238592 Jy
! Component: 550  -  total flux cleaned = -0.00236797 Jy
! Component: 600  -  total flux cleaned = -0.00238481 Jy
! Component: 650  -  total flux cleaned = -0.00243296 Jy
! Component: 700  -  total flux cleaned = -0.00240294 Jy
! Component: 750  -  total flux cleaned = -0.00237379 Jy
! Component: 800  -  total flux cleaned = -0.00230276 Jy
! Component: 850  -  total flux cleaned = -0.00221966 Jy
! Component: 900  -  total flux cleaned = -0.00208503 Jy
! Component: 950  -  total flux cleaned = -0.00196724 Jy
! Component: 1000  -  total flux cleaned = -0.00187782 Jy
! Component: 1050  -  total flux cleaned = -0.00174126 Jy
! Component: 1100  -  total flux cleaned = -0.00163266 Jy
! Component: 1150  -  total flux cleaned = -0.00152677 Jy
! Component: 1200  -  total flux cleaned = -0.00142314 Jy
! Component: 1250  -  total flux cleaned = -0.0012659 Jy
! Component: 1300  -  total flux cleaned = -0.00113416 Jy
! Component: 1350  -  total flux cleaned = -0.0010373 Jy
! Component: 1400  -  total flux cleaned = -0.000910441 Jy
! Component: 1450  -  total flux cleaned = -0.000796327 Jy
! Component: 1500  -  total flux cleaned = -0.000684132 Jy
! Component: 1550  -  total flux cleaned = -0.000563758 Jy
! Component: 1600  -  total flux cleaned = -0.000494377 Jy
! Component: 1650  -  total flux cleaned = -0.000445368 Jy
! Component: 1700  -  total flux cleaned = -0.000396548 Jy
! Component: 1750  -  total flux cleaned = -0.000318886 Jy
! Component: 1800  -  total flux cleaned = -0.000260913 Jy
! Component: 1850  -  total flux cleaned = -0.000193382 Jy
! Component: 1900  -  total flux cleaned = -0.000145203 Jy
! Component: 1950  -  total flux cleaned = -7.77745e-05 Jy
! Component: 2000  -  total flux cleaned = -2.95719e-05 Jy
! Component: 2050  -  total flux cleaned = 3.78675e-05 Jy
! Component: 2100  -  total flux cleaned = 9.58103e-05 Jy
! Component: 2150  -  total flux cleaned = 0.000153735 Jy
! Component: 2200  -  total flux cleaned = 0.000192422 Jy
! Component: 2250  -  total flux cleaned = 0.000231269 Jy
! Component: 2300  -  total flux cleaned = 0.000270293 Jy
! Component: 2350  -  total flux cleaned = 0.000309639 Jy
! Component: 2400  -  total flux cleaned = 0.000369079 Jy
! Component: 2450  -  total flux cleaned = 0.00040901 Jy
! Component: 2500  -  total flux cleaned = 0.00045936 Jy
! Component: 2550  -  total flux cleaned = 0.000500028 Jy
! Component: 2600  -  total flux cleaned = 0.000530737 Jy
! Component: 2650  -  total flux cleaned = 0.000571885 Jy
! Component: 2700  -  total flux cleaned = 0.000613554 Jy
! Component: 2750  -  total flux cleaned = 0.000655517 Jy
! Component: 2800  -  total flux cleaned = 0.0006978 Jy
! Component: 2850  -  total flux cleaned = 0.000740482 Jy
! Component: 2900  -  total flux cleaned = 0.000772716 Jy
! Component: 2950  -  total flux cleaned = 0.000826958 Jy
! Component: 3000  -  total flux cleaned = 0.000870727 Jy
! Component: 3050  -  total flux cleaned = 0.000914843 Jy
! Component: 3100  -  total flux cleaned = 0.00094822 Jy
! Component: 3150  -  total flux cleaned = 0.00102692 Jy
! Component: 3200  -  total flux cleaned = 0.0010496 Jy
! Component: 3250  -  total flux cleaned = 0.00110679 Jy
! Component: 3300  -  total flux cleaned = 0.00114139 Jy
! Component: 3350  -  total flux cleaned = 0.00118802 Jy
! Component: 3400  -  total flux cleaned = 0.00124676 Jy
! Component: 3450  -  total flux cleaned = 0.00129411 Jy
! Component: 3500  -  total flux cleaned = 0.00135403 Jy
! Component: 3550  -  total flux cleaned = 0.00140245 Jy
! Component: 3600  -  total flux cleaned = 0.00143906 Jy
! Component: 3650  -  total flux cleaned = 0.00147607 Jy
! Component: 3700  -  total flux cleaned = 0.00155072 Jy
! Component: 3750  -  total flux cleaned = 0.00158839 Jy
! Component: 3800  -  total flux cleaned = 0.00163916 Jy
! Component: 3850  -  total flux cleaned = 0.00169052 Jy
! Component: 3900  -  total flux cleaned = 0.00175537 Jy
! Component: 3950  -  total flux cleaned = 0.00180772 Jy
! Component: 4000  -  total flux cleaned = 0.00187392 Jy
! Component: 4050  -  total flux cleaned = 0.00194099 Jy
! Total flux subtracted in 4096 components = 0.0019681 Jy
! Clean residual min=-0.000798 max=0.000774 Jy/beam
! Clean residual mean=-0.000006 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.0812543 Jy
keep
! Adding 258 model components to the UV plane model.
! The established model now contains 354 components and 0.0812542 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0721-3528_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.283 x 36.06 at -14.68 degrees (North through East)
! Clean map  min=-0.0019177  max=0.065109 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0721-3528_S_map.fits
wmodel /image_prod/ug002_uva//J0721-3528_S_map.mod
! Writing 354 model components to file: /image_prod/ug002_uva//J0721-3528_S_map.mod
wobs   /image_prod/ug002_uva//J0721-3528_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0721-3528_S_uvs.fits
wwins  /image_prod/ug002_uva//J0721-3528_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0721-3528_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0651089 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000274965 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.26695 1.26695 2.53389 5.06779 10.1356 20.2712 40.5423 81.0846
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  236.789 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0721-3528_S_dfm.log closed on Wed Mar  4 21:45:16 2020