! Started logfile: /image_prod/ug002_uva//J0719-1955_S_dfm.log on Wed Mar  4 21:44:02 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0719-1955_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0719-1955_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.997222 visibilities/baseline/integration-bin.
! Found source: J0719-1955
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 6462 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0719-1955_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.009817Jy  sigma=6.782116
! Fit after  self-cal, rms=0.947980Jy  sigma=6.349754
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.576 mas, bmaj=6.79 mas, bpa=-1.758 degrees
! Estimated noise=2.06397 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0430708 Jy
! Component: 100  -  total flux cleaned = 0.0527542 Jy
! Total flux subtracted in 100 components = 0.0527542 Jy
! Clean residual min=-0.004860 max=0.005370 Jy/beam
! Clean residual mean=-0.000011 rms=0.001233 Jy/beam
! Combined flux in latest and established models = 0.0527542 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0527542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088202Jy  sigma=0.480035
! Fit after  self-cal, rms=0.086646Jy  sigma=0.468731
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.143 mas, bmaj=7.888 mas, bpa=-3.85 degrees
! Estimated noise=1.37962 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0057286 Jy
! Component: 100  -  total flux cleaned = 0.00690796 Jy
! Component: 150  -  total flux cleaned = 0.00718488 Jy
! Component: 200  -  total flux cleaned = 0.00736109 Jy
! Total flux subtracted in 200 components = 0.00736109 Jy
! Clean residual min=-0.003015 max=0.003217 Jy/beam
! Clean residual mean=-0.000011 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.0601153 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.0601153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086305Jy  sigma=0.465739
! Fit after  self-cal, rms=0.086296Jy  sigma=0.465684
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.143 x 7.888 at -3.85 degrees (North through East)
! Clean map  min=-0.0029145  max=0.058851 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.04     HN        1.07     KP        0.91     
!   LA        1.02     MK        1.03     OV        0.86     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.98     KP        1.01     
!   LA        1.00     MK        0.98     OV        0.94     PT        1.00     
!   SC        0.85     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        1.06     HN        1.10     KP        0.99     
!   LA        0.99     MK        0.97     OV        0.94     PT        1.01     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.086296Jy  sigma=0.465684
! Fit after  self-cal, rms=0.088754Jy  sigma=0.464373
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.124 mas, bmaj=7.837 mas, bpa=-3.208 degrees
! Estimated noise=1.36513 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.67147e-05 Jy
! Component: 100  -  total flux cleaned = 0.000109717 Jy
! Component: 150  -  total flux cleaned = 0.000177476 Jy
! Component: 200  -  total flux cleaned = 0.000237901 Jy
! Total flux subtracted in 200 components = 0.000237901 Jy
! Clean residual min=-0.002632 max=0.002907 Jy/beam
! Clean residual mean=-0.000011 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.0603532 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 24 components and 0.0603532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088703Jy  sigma=0.464200
! Fit after  self-cal, rms=0.088798Jy  sigma=0.464022
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088798Jy  sigma=0.464022
! Fit after  self-cal, rms=0.086851Jy  sigma=0.462987
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.117 mas, bmaj=7.854 mas, bpa=-2.993 degrees
! Estimated noise=1.36502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.94434e-05 Jy
! Component: 100  -  total flux cleaned = 9.85753e-05 Jy
! Component: 150  -  total flux cleaned = 0.000159092 Jy
! Component: 200  -  total flux cleaned = 0.000185899 Jy
! Total flux subtracted in 200 components = 0.000185899 Jy
! Clean residual min=-0.002571 max=0.002822 Jy/beam
! Clean residual mean=-0.000013 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.0605391 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 27 components and 0.0605391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086810Jy  sigma=0.462839
! Fit after  self-cal, rms=0.086822Jy  sigma=0.462728
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140097 Jy
! Component: 100  -  total flux cleaned = -0.000113438 Jy
! Component: 150  -  total flux cleaned = -6.60265e-05 Jy
! Component: 200  -  total flux cleaned = -4.54965e-05 Jy
! Total flux subtracted in 200 components = -4.54965e-05 Jy
! Clean residual min=-0.002618 max=0.002828 Jy/beam
! Clean residual mean=-0.000013 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.0604936 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 32 components and 0.0604936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086798Jy  sigma=0.462648
! Fit after  self-cal, rms=0.086786Jy  sigma=0.462628
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086786Jy  sigma=0.462628
! Fit after  self-cal, rms=0.086876Jy  sigma=0.462575
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.11 mas, bmaj=7.859 mas, bpa=-2.914 degrees
! Estimated noise=1.3637 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.26522e-05 Jy
! Component: 100  -  total flux cleaned = 0.000127957 Jy
! Component: 150  -  total flux cleaned = 0.000175663 Jy
! Component: 200  -  total flux cleaned = 0.000217346 Jy
! Total flux subtracted in 200 components = 0.000217346 Jy
! Clean residual min=-0.002570 max=0.002790 Jy/beam
! Clean residual mean=-0.000013 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.0607109 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.0607109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086852Jy  sigma=0.462492
! Fit after  self-cal, rms=0.086855Jy  sigma=0.462472
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.62419e-05 Jy
! Component: 100  -  total flux cleaned = -7.45213e-05 Jy
! Component: 150  -  total flux cleaned = -5.46426e-05 Jy
! Component: 200  -  total flux cleaned = -3.685e-05 Jy
! Total flux subtracted in 200 components = -3.685e-05 Jy
! Clean residual min=-0.002601 max=0.002797 Jy/beam
! Clean residual mean=-0.000013 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.0606741 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 42 components and 0.0606741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086839Jy  sigma=0.462425
! Fit after  self-cal, rms=0.086831Jy  sigma=0.462415
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086831Jy  sigma=0.462415
! Fit after  self-cal, rms=0.086747Jy  sigma=0.462387
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.305 mas, bmaj=16.67 mas, bpa=2.655 degrees
! Estimated noise=1.73576 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000705838 Jy
! Component: 100  -  total flux cleaned = 0.000709798 Jy
! Component: 150  -  total flux cleaned = 0.000710975 Jy
! Component: 200  -  total flux cleaned = 0.00071109 Jy
! Total flux subtracted in 200 components = 0.00071109 Jy
! Clean residual min=-0.002963 max=0.003717 Jy/beam
! Clean residual mean=-0.000025 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.0613852 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 49 components and 0.0613852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086742Jy  sigma=0.462369
! Fit after  self-cal, rms=0.086746Jy  sigma=0.462345
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.55287e-05 Jy
! Component: 100  -  total flux cleaned = 3.77247e-05 Jy
! Component: 150  -  total flux cleaned = 3.86349e-05 Jy
! Component: 200  -  total flux cleaned = 3.79713e-05 Jy
! Total flux subtracted in 200 components = 3.79713e-05 Jy
! Clean residual min=-0.002942 max=0.003728 Jy/beam
! Clean residual mean=-0.000024 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.0614231 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.0614231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086744Jy  sigma=0.462350
! Fit after  self-cal, rms=0.086740Jy  sigma=0.462330
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.104 mas, bmaj=7.86 mas, bpa=-2.822 degrees
! Estimated noise=1.36088 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.104 x 7.86 at -2.822 degrees (North through East)
! Clean map  min=-0.0028832  max=0.057984 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=6.795 mas, bpa=-0.9156 degrees
! Estimated noise=2.03848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0439785 Jy
! Component: 100  -  total flux cleaned = 0.0550874 Jy
! Component: 150  -  total flux cleaned = 0.0564036 Jy
! Component: 200  -  total flux cleaned = 0.0576335 Jy
! Total flux subtracted in 200 components = 0.0576335 Jy
! Clean residual min=-0.004331 max=0.003913 Jy/beam
! Clean residual mean=-0.000013 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 0.0576335 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0576335 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.104 mas, bmaj=7.86 mas, bpa=-2.822 degrees
! Estimated noise=1.36088 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259392 Jy
! Component: 100  -  total flux cleaned = 0.00286173 Jy
! Component: 150  -  total flux cleaned = 0.00297031 Jy
! Component: 200  -  total flux cleaned = 0.00301598 Jy
! Total flux subtracted in 200 components = 0.00301598 Jy
! Clean residual min=-0.002628 max=0.002816 Jy/beam
! Clean residual mean=-0.000014 rms=0.000688 Jy/beam
! Combined flux in latest and established models = 0.0606495 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 24 components and 0.0606495 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.305 mas, bmaj=16.67 mas, bpa=2.655 degrees
! Estimated noise=1.73576 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000738597 Jy
! Component: 100  -  total flux cleaned = 0.000739095 Jy
! Component: 150  -  total flux cleaned = 0.000763133 Jy
! Component: 200  -  total flux cleaned = 0.000783224 Jy
! Total flux subtracted in 200 components = 0.000783224 Jy
! Clean residual min=-0.002921 max=0.003797 Jy/beam
! Clean residual mean=-0.000024 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.0614327 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.79308e-05 Jy
! Component: 100  -  total flux cleaned = 1.83132e-05 Jy
! Component: 150  -  total flux cleaned = 1.58714e-05 Jy
! Component: 200  -  total flux cleaned = 1.65995e-05 Jy
! Total flux subtracted in 200 components = 1.65995e-05 Jy
! Clean residual min=-0.002930 max=0.003778 Jy/beam
! Clean residual mean=-0.000024 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 0.0614493 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 35 components and 0.0614493 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.104 mas, bmaj=7.86 mas, bpa=-2.822 degrees
! Estimated noise=1.36088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000409071 Jy
! Component: 100  -  total flux cleaned = -0.000440802 Jy
! Component: 150  -  total flux cleaned = -0.000441777 Jy
! Component: 200  -  total flux cleaned = -0.000442148 Jy
! Total flux subtracted in 200 components = -0.000442148 Jy
! Clean residual min=-0.002514 max=0.002833 Jy/beam
! Clean residual mean=-0.000013 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.0610072 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 41 components and 0.0610072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086747Jy  sigma=0.462359
! Fit after  self-cal, rms=0.086744Jy  sigma=0.462337
wmodel J0719-1955_S_map.mod
! Writing 41 model components to file: J0719-1955_S_map.mod
wobs   J0719-1955_S_uvs.fits
! Writing UV FITS file: J0719-1955_S_uvs.fits
wwins  J0719-1955_S_map.win
! wwins: Wrote 1 windows to J0719-1955_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000910574 Jy
! Component: 100  -  total flux cleaned = 0.00130515 Jy
! Component: 150  -  total flux cleaned = 0.000899198 Jy
! Component: 200  -  total flux cleaned = 0.000667837 Jy
! Component: 250  -  total flux cleaned = 0.0004832 Jy
! Component: 300  -  total flux cleaned = 0.00030479 Jy
! Component: 350  -  total flux cleaned = 0.000235232 Jy
! Component: 400  -  total flux cleaned = 0.000167481 Jy
! Component: 450  -  total flux cleaned = 0.000167505 Jy
! Component: 500  -  total flux cleaned = 0.000136565 Jy
! Component: 550  -  total flux cleaned = 0.00013661 Jy
! Component: 600  -  total flux cleaned = 0.000166617 Jy
! Component: 650  -  total flux cleaned = 0.00010811 Jy
! Component: 700  -  total flux cleaned = 7.89303e-05 Jy
! Component: 750  -  total flux cleaned = -6.15167e-06 Jy
! Component: 800  -  total flux cleaned = -8.83318e-05 Jy
! Component: 850  -  total flux cleaned = -8.84261e-05 Jy
! Component: 900  -  total flux cleaned = -0.000247112 Jy
! Component: 950  -  total flux cleaned = -0.000272799 Jy
! Component: 1000  -  total flux cleaned = -0.000424835 Jy
! Component: 1050  -  total flux cleaned = -0.000474171 Jy
! Component: 1100  -  total flux cleaned = -0.000572202 Jy
! Component: 1150  -  total flux cleaned = -0.000595801 Jy
! Component: 1200  -  total flux cleaned = -0.000714046 Jy
! Component: 1250  -  total flux cleaned = -0.000737335 Jy
! Component: 1300  -  total flux cleaned = -0.000828933 Jy
! Component: 1350  -  total flux cleaned = -0.000919021 Jy
! Component: 1400  -  total flux cleaned = -0.000985597 Jy
! Component: 1450  -  total flux cleaned = -0.00111679 Jy
! Component: 1500  -  total flux cleaned = -0.00126723 Jy
! Component: 1550  -  total flux cleaned = -0.00139409 Jy
! Component: 1600  -  total flux cleaned = -0.0014778 Jy
! Component: 1650  -  total flux cleaned = -0.00162133 Jy
! Component: 1700  -  total flux cleaned = -0.0016417 Jy
! Component: 1750  -  total flux cleaned = -0.00174149 Jy
! Component: 1800  -  total flux cleaned = -0.00185968 Jy
! Component: 1850  -  total flux cleaned = -0.00199526 Jy
! Component: 1900  -  total flux cleaned = -0.00207175 Jy
! Component: 1950  -  total flux cleaned = -0.00218553 Jy
! Component: 2000  -  total flux cleaned = -0.00226007 Jy
! Component: 2050  -  total flux cleaned = -0.00240735 Jy
! Component: 2100  -  total flux cleaned = -0.00251627 Jy
! Component: 2150  -  total flux cleaned = -0.00260575 Jy
! Component: 2200  -  total flux cleaned = -0.0026591 Jy
! Component: 2250  -  total flux cleaned = -0.00272926 Jy
! Component: 2300  -  total flux cleaned = -0.00281629 Jy
! Component: 2350  -  total flux cleaned = -0.00295319 Jy
! Component: 2400  -  total flux cleaned = -0.00303785 Jy
! Component: 2450  -  total flux cleaned = -0.00308781 Jy
! Component: 2500  -  total flux cleaned = -0.00320375 Jy
! Component: 2550  -  total flux cleaned = -0.00328586 Jy
! Component: 2600  -  total flux cleaned = -0.00338321 Jy
! Component: 2650  -  total flux cleaned = -0.00347969 Jy
! Component: 2700  -  total flux cleaned = -0.00359101 Jy
! Component: 2750  -  total flux cleaned = -0.00368545 Jy
! Component: 2800  -  total flux cleaned = -0.00374766 Jy
! Component: 2850  -  total flux cleaned = -0.00382511 Jy
! Component: 2900  -  total flux cleaned = -0.00397813 Jy
! Component: 2950  -  total flux cleaned = -0.00409929 Jy
! Component: 3000  -  total flux cleaned = -0.0041143 Jy
! Component: 3050  -  total flux cleaned = -0.00421856 Jy
! Component: 3100  -  total flux cleaned = -0.00427748 Jy
! Component: 3150  -  total flux cleaned = -0.00433602 Jy
! Component: 3200  -  total flux cleaned = -0.00439413 Jy
! Component: 3250  -  total flux cleaned = -0.00443732 Jy
! Component: 3300  -  total flux cleaned = -0.00452318 Jy
! Component: 3350  -  total flux cleaned = -0.0045799 Jy
! Component: 3400  -  total flux cleaned = -0.00463603 Jy
! Component: 3450  -  total flux cleaned = -0.0047618 Jy
! Component: 3500  -  total flux cleaned = -0.00485866 Jy
! Component: 3550  -  total flux cleaned = -0.00492747 Jy
! Component: 3600  -  total flux cleaned = -0.00499581 Jy
! Component: 3650  -  total flux cleaned = -0.00506355 Jy
! Component: 3700  -  total flux cleaned = -0.00510399 Jy
! Component: 3750  -  total flux cleaned = -0.0051308 Jy
! Component: 3800  -  total flux cleaned = -0.00514425 Jy
! Component: 3850  -  total flux cleaned = -0.00519721 Jy
! Component: 3900  -  total flux cleaned = -0.00527609 Jy
! Component: 3950  -  total flux cleaned = -0.00530218 Jy
! Component: 4000  -  total flux cleaned = -0.00534097 Jy
! Component: 4050  -  total flux cleaned = -0.00536674 Jy
! Total flux subtracted in 4096 components = -0.00545665 Jy
! Clean residual min=-0.000705 max=0.000816 Jy/beam
! Clean residual mean=-0.000002 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0555505 Jy
keep
! Adding 273 model components to the UV plane model.
! The established model now contains 314 components and 0.0555505 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0719-1955_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.104 x 7.86 at -2.822 degrees (North through East)
! Clean map  min=-0.0028854  max=0.057623 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0719-1955_S_map.fits
wmodel /image_prod/ug002_uva//J0719-1955_S_map.mod
! Writing 314 model components to file: /image_prod/ug002_uva//J0719-1955_S_map.mod
wobs   /image_prod/ug002_uva//J0719-1955_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0719-1955_S_uvs.fits
wwins  /image_prod/ug002_uva//J0719-1955_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0719-1955_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0576227 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00021837 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13689 1.13689 2.27379 4.54758 9.09516 18.1903 36.3806 72.7612
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  263.876 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0719-1955_S_dfm.log closed on Wed Mar  4 21:44:05 2020