! Started logfile: /image_prod/ug002_uva//J0714+8151_S_a_dfm.log on Wed Mar  4 21:43:09 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0714+8151_S_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0714+8151_S_a_uva.fits
! AN table 1: 30 integrations on 10 of 10 possible baselines.
! AN table 2: 15 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.666667 visibilities/baseline/integration-bin.
! Found source: J0714+8151
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 630 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0714+8151_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 30 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 30 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 30 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.997318Jy  sigma=8.539585
! Fit after  self-cal, rms=0.958341Jy  sigma=8.070209
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.25 mas, bmaj=29.71 mas, bpa=64.84 degrees
! Estimated noise=6.03502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0352705 Jy
! Component: 100  -  total flux cleaned = 0.0365412 Jy
! Total flux subtracted in 100 components = 0.0365412 Jy
! Clean residual min=-0.006357 max=0.006323 Jy/beam
! Clean residual mean=0.000044 rms=0.002608 Jy/beam
! Combined flux in latest and established models = 0.0365412 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0365412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049726Jy  sigma=0.380899
! Fit after  self-cal, rms=0.048512Jy  sigma=0.370916
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.782 mas, bmaj=27.14 mas, bpa=63.83 degrees
! Estimated noise=3.5452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00572713 Jy
! Component: 100  -  total flux cleaned = -0.00648489 Jy
! Component: 150  -  total flux cleaned = -0.00663202 Jy
! Component: 200  -  total flux cleaned = -0.0063209 Jy
! Total flux subtracted in 200 components = -0.0063209 Jy
! Clean residual min=-0.001574 max=0.001584 Jy/beam
! Clean residual mean=-0.000005 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.0302203 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 101 components and 0.0302203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.046989Jy  sigma=0.359610
! Fit after  self-cal, rms=0.046683Jy  sigma=0.357945
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.782 x 27.14 at 63.83 degrees (North through East)
! Clean map  min=-0.0086634  max=0.039075 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     LA        0.97     OV        0.90     
!   PT        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    
! 
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.25     LA        0.98     OV        0.81     
!   PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    
! 
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.91     LA        1.08     OV        0.95     
!   PT        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    
! 
! 
! Fit before self-cal, rms=0.046683Jy  sigma=0.357945
! Fit after  self-cal, rms=0.046146Jy  sigma=0.375686
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.731 mas, bmaj=26.99 mas, bpa=62.72 degrees
! Estimated noise=3.89852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000814885 Jy
! Component: 100  -  total flux cleaned = 0.000886695 Jy
! Component: 150  -  total flux cleaned = 0.000836662 Jy
! Component: 200  -  total flux cleaned = 0.000686325 Jy
! Total flux subtracted in 200 components = 0.000686325 Jy
! Clean residual min=-0.000818 max=0.000816 Jy/beam
! Clean residual mean=-0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.0309066 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 151 components and 0.0309066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.045958Jy  sigma=0.374259
! Fit after  self-cal, rms=0.045822Jy  sigma=0.373494
! Inverting map 
! Added new window around map position (-81.5, 36.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000666668 Jy
! Component: 100  -  total flux cleaned = 0.000778261 Jy
! Component: 150  -  total flux cleaned = 0.000780057 Jy
! Component: 200  -  total flux cleaned = 0.000650729 Jy
! Total flux subtracted in 200 components = 0.000650729 Jy
! Clean residual min=-0.001060 max=0.001269 Jy/beam
! Clean residual mean=-0.000005 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.0315574 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 190 components and 0.0315574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.045780Jy  sigma=0.373197
! Fit after  self-cal, rms=0.045759Jy  sigma=0.373110
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.045759Jy  sigma=0.373110
! Fit after  self-cal, rms=0.045917Jy  sigma=0.372906
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.761 mas, bmaj=26.9 mas, bpa=62.42 degrees
! Estimated noise=3.89532 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00013009 Jy
! Component: 100  -  total flux cleaned = -4.19053e-05 Jy
! Component: 150  -  total flux cleaned = -0.000193032 Jy
! Component: 200  -  total flux cleaned = -0.000402827 Jy
! Total flux subtracted in 200 components = -0.000402827 Jy
! Clean residual min=-0.000984 max=0.001362 Jy/beam
! Clean residual mean=-0.000003 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0311545 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 233 components and 0.0311545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.045891Jy  sigma=0.372772
! Fit after  self-cal, rms=0.045898Jy  sigma=0.372659
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6, -105).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114233 Jy
! Component: 100  -  total flux cleaned = 0.00118127 Jy
! Component: 150  -  total flux cleaned = 0.00118263 Jy
! Component: 200  -  total flux cleaned = 0.00113858 Jy
! Total flux subtracted in 200 components = 0.00113858 Jy
! Clean residual min=-0.000737 max=0.000952 Jy/beam
! Clean residual mean=-0.000001 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.0322931 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 263 components and 0.0322931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.045862Jy  sigma=0.372275
! Fit after  self-cal, rms=0.045838Jy  sigma=0.372200
! Inverting map 
! Added new window around map position (95, -98).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043413 Jy
! Component: 100  -  total flux cleaned = 0.00059913 Jy
! Component: 150  -  total flux cleaned = 0.000661429 Jy
! Component: 200  -  total flux cleaned = 0.000662148 Jy
! Total flux subtracted in 200 components = 0.000662148 Jy
! Clean residual min=-0.000802 max=0.000758 Jy/beam
! Clean residual mean=-0.000000 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.0329553 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 302 components and 0.0329553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.045798Jy  sigma=0.371817
! Fit after  self-cal, rms=0.045772Jy  sigma=0.371751
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.045772Jy  sigma=0.371751
! Fit after  self-cal, rms=0.046167Jy  sigma=0.371604
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.795 mas, bmaj=26.87 mas, bpa=62.15 degrees
! Estimated noise=3.88716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000815936 Jy
! Component: 100  -  total flux cleaned = 0.00103434 Jy
! Component: 150  -  total flux cleaned = 0.00108816 Jy
! Component: 200  -  total flux cleaned = 0.00106461 Jy
! Total flux subtracted in 200 components = 0.00106461 Jy
! Clean residual min=-0.000844 max=0.000725 Jy/beam
! Clean residual mean=0.000001 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.0340199 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 329 components and 0.0340199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.046129Jy  sigma=0.371308
! Fit after  self-cal, rms=0.046149Jy  sigma=0.371178
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000183615 Jy
! Component: 100  -  total flux cleaned = 0.000300779 Jy
! Component: 150  -  total flux cleaned = 0.0003007 Jy
! Component: 200  -  total flux cleaned = 0.000301139 Jy
! Total flux subtracted in 200 components = 0.000301139 Jy
! Clean residual min=-0.000786 max=0.000757 Jy/beam
! Clean residual mean=0.000001 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.034321 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 362 components and 0.034321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.046120Jy  sigma=0.370907
! Fit after  self-cal, rms=0.046109Jy  sigma=0.370849
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.046109Jy  sigma=0.370849
! Fit after  self-cal, rms=0.046875Jy  sigma=0.370697
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.745 mas, bmaj=27.21 mas, bpa=60.44 degrees
! Estimated noise=3.8795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000800892 Jy
! Component: 100  -  total flux cleaned = 0.000943802 Jy
! Component: 150  -  total flux cleaned = 0.000992884 Jy
! Component: 200  -  total flux cleaned = 0.00110973 Jy
! Total flux subtracted in 200 components = 0.00110973 Jy
! Clean residual min=-0.000804 max=0.000602 Jy/beam
! Clean residual mean=0.000001 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.0354307 Jy
selfcal
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 385 components and 0.0354307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.046843Jy  sigma=0.370450
! Fit after  self-cal, rms=0.046860Jy  sigma=0.370153
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149557 Jy
! Component: 100  -  total flux cleaned = 0.000622117 Jy
! Component: 150  -  total flux cleaned = 0.000879493 Jy
! Component: 200  -  total flux cleaned = 0.00109229 Jy
! Total flux subtracted in 200 components = 0.00109229 Jy
! Clean residual min=-0.000828 max=0.000600 Jy/beam
! Clean residual mean=-0.000002 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.036523 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 447 components and 0.036523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.046784Jy  sigma=0.369651
! Fit after  self-cal, rms=0.046759Jy  sigma=0.369517
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.828 mas, bmaj=26.83 mas, bpa=61.9 degrees
! Estimated noise=3.88198 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.828 x 26.83 at 61.9 degrees (North through East)
! Clean map  min=-0.0060502  max=0.037558 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.685 mas, bmaj=29.86 mas, bpa=63.38 degrees
! Estimated noise=7.26053 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274104 Jy
! Component: 100  -  total flux cleaned = 0.0377509 Jy
! Component: 150  -  total flux cleaned = 0.0369689 Jy
! Component: 200  -  total flux cleaned = 0.0345833 Jy
! Total flux subtracted in 200 components = 0.0345833 Jy
! Clean residual min=-0.011952 max=0.011868 Jy/beam
! Clean residual mean=-0.000129 rms=0.003062 Jy/beam
! Combined flux in latest and established models = 0.0345833 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0345833 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.828 mas, bmaj=26.83 mas, bpa=61.9 degrees
! Estimated noise=3.88198 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00483791 Jy
! Component: 100  -  total flux cleaned = -0.00639338 Jy
! Component: 150  -  total flux cleaned = -0.00713975 Jy
! Component: 200  -  total flux cleaned = -0.00803347 Jy
! Total flux subtracted in 200 components = -0.00803347 Jy
! Clean residual min=-0.004339 max=0.004619 Jy/beam
! Clean residual mean=-0.000060 rms=0.001197 Jy/beam
! Combined flux in latest and established models = 0.0265498 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 68 components and 0.0265498 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.745 mas, bmaj=27.21 mas, bpa=60.44 degrees
! Estimated noise=3.8795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00241127 Jy
! Component: 100  -  total flux cleaned = -0.00291215 Jy
! Component: 150  -  total flux cleaned = -0.00317636 Jy
! Component: 200  -  total flux cleaned = -0.00341612 Jy
! Total flux subtracted in 200 components = -0.00341612 Jy
! Clean residual min=-0.002924 max=0.003588 Jy/beam
! Clean residual mean=-0.000032 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.0231337 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-49, 117).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175933 Jy
! Component: 100  -  total flux cleaned = 0.00193746 Jy
! Component: 150  -  total flux cleaned = 0.0020041 Jy
! Component: 200  -  total flux cleaned = 0.00180492 Jy
! Total flux subtracted in 200 components = 0.00180492 Jy
! Clean residual min=-0.001657 max=0.001498 Jy/beam
! Clean residual mean=-0.000003 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.0249386 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 138 components and 0.0249386 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.828 mas, bmaj=26.83 mas, bpa=61.9 degrees
! Estimated noise=3.88198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000862792 Jy
! Component: 100  -  total flux cleaned = -0.00113782 Jy
! Component: 150  -  total flux cleaned = -0.00133636 Jy
! Component: 200  -  total flux cleaned = -0.00147163 Jy
! Total flux subtracted in 200 components = -0.00147163 Jy
! Clean residual min=-0.001182 max=0.001187 Jy/beam
! Clean residual mean=0.000006 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.023467 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 181 components and 0.023467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.046996Jy  sigma=0.372721
! Fit after  self-cal, rms=0.046909Jy  sigma=0.372132
wmodel J0714+8151_S_a_map.mod
! Writing 181 model components to file: J0714+8151_S_a_map.mod
wobs   J0714+8151_S_a_uvs.fits
! Writing UV FITS file: J0714+8151_S_a_uvs.fits
wwins  J0714+8151_S_a_map.win
! wwins: Wrote 4 windows to J0714+8151_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000338977 Jy
! Component: 100  -  total flux cleaned = -0.000468268 Jy
! Component: 150  -  total flux cleaned = -0.000539036 Jy
! Component: 200  -  total flux cleaned = -0.000590269 Jy
! Component: 250  -  total flux cleaned = -0.000639807 Jy
! Component: 300  -  total flux cleaned = -0.000656069 Jy
! Component: 350  -  total flux cleaned = -0.000640418 Jy
! Component: 400  -  total flux cleaned = -0.000625296 Jy
! Component: 450  -  total flux cleaned = -0.000610696 Jy
! Component: 500  -  total flux cleaned = -0.000639622 Jy
! Component: 550  -  total flux cleaned = -0.000668019 Jy
! Component: 600  -  total flux cleaned = -0.000682075 Jy
! Component: 650  -  total flux cleaned = -0.000723433 Jy
! Component: 700  -  total flux cleaned = -0.000764478 Jy
! Component: 750  -  total flux cleaned = -0.000791551 Jy
! Component: 800  -  total flux cleaned = -0.000791467 Jy
! Component: 850  -  total flux cleaned = -0.000805011 Jy
! Component: 900  -  total flux cleaned = -0.000818621 Jy
! Component: 950  -  total flux cleaned = -0.000832187 Jy
! Component: 1000  -  total flux cleaned = -0.000859744 Jy
! Component: 1050  -  total flux cleaned = -0.00084564 Jy
! Component: 1100  -  total flux cleaned = -0.000859514 Jy
! Component: 1150  -  total flux cleaned = -0.000873612 Jy
! Component: 1200  -  total flux cleaned = -0.000888284 Jy
! Component: 1250  -  total flux cleaned = -0.000918033 Jy
! Component: 1300  -  total flux cleaned = -0.000933166 Jy
! Component: 1350  -  total flux cleaned = -0.000948769 Jy
! Component: 1400  -  total flux cleaned = -0.000964683 Jy
! Component: 1450  -  total flux cleaned = -0.000964327 Jy
! Component: 1500  -  total flux cleaned = -0.000980885 Jy
! Component: 1550  -  total flux cleaned = -0.000980614 Jy
! Component: 1600  -  total flux cleaned = -0.000980445 Jy
! Component: 1650  -  total flux cleaned = -0.000998967 Jy
! Component: 1700  -  total flux cleaned = -0.000998824 Jy
! Component: 1750  -  total flux cleaned = -0.00101908 Jy
! Component: 1800  -  total flux cleaned = -0.0009987 Jy
! Component: 1850  -  total flux cleaned = -0.000977499 Jy
! Component: 1900  -  total flux cleaned = -0.000977029 Jy
! Component: 1950  -  total flux cleaned = -0.000931355 Jy
! Component: 2000  -  total flux cleaned = -0.000931407 Jy
! Component: 2050  -  total flux cleaned = -0.000907197 Jy
! Component: 2100  -  total flux cleaned = -0.00088201 Jy
! Component: 2150  -  total flux cleaned = -0.000855565 Jy
! Component: 2200  -  total flux cleaned = -0.000828266 Jy
! Component: 2250  -  total flux cleaned = -0.000771764 Jy
! Component: 2300  -  total flux cleaned = -0.000801022 Jy
! Component: 2350  -  total flux cleaned = -0.000710931 Jy
! Component: 2400  -  total flux cleaned = -0.000711435 Jy
! Component: 2450  -  total flux cleaned = -0.000647609 Jy
! Component: 2500  -  total flux cleaned = -0.000613629 Jy
! Component: 2550  -  total flux cleaned = -0.000578567 Jy
! Component: 2600  -  total flux cleaned = -0.000542389 Jy
! Component: 2650  -  total flux cleaned = -0.000504582 Jy
! Component: 2700  -  total flux cleaned = -0.00046566 Jy
! Component: 2750  -  total flux cleaned = -0.000465008 Jy
! Component: 2800  -  total flux cleaned = -0.000380783 Jy
! Component: 2850  -  total flux cleaned = -0.000381203 Jy
! Component: 2900  -  total flux cleaned = -0.000337359 Jy
! Component: 2950  -  total flux cleaned = -0.000337731 Jy
! Component: 3000  -  total flux cleaned = -0.000289467 Jy
! Component: 3050  -  total flux cleaned = -0.00023957 Jy
! Component: 3100  -  total flux cleaned = -0.000187898 Jy
! Component: 3150  -  total flux cleaned = -0.00013251 Jy
! Component: 3200  -  total flux cleaned = -0.000188747 Jy
! Component: 3250  -  total flux cleaned = -0.000131334 Jy
! Component: 3300  -  total flux cleaned = -7.07879e-05 Jy
! Component: 3350  -  total flux cleaned = -7.08787e-05 Jy
! Component: 3400  -  total flux cleaned = -5.71004e-06 Jy
! Component: 3450  -  total flux cleaned = -7.25744e-06 Jy
! Component: 3500  -  total flux cleaned = 6.1623e-05 Jy
! Component: 3550  -  total flux cleaned = 0.000135819 Jy
! Component: 3600  -  total flux cleaned = 0.000134533 Jy
! Component: 3650  -  total flux cleaned = 0.000213763 Jy
! Component: 3700  -  total flux cleaned = 0.000295655 Jy
! Component: 3750  -  total flux cleaned = 0.000297307 Jy
! Component: 3800  -  total flux cleaned = 0.000384735 Jy
! Component: 3850  -  total flux cleaned = 0.00038338 Jy
! Component: 3900  -  total flux cleaned = 0.0004779 Jy
! Component: 3950  -  total flux cleaned = 0.000476673 Jy
! Component: 4000  -  total flux cleaned = 0.000578312 Jy
! Component: 4050  -  total flux cleaned = 0.000578241 Jy
! Total flux subtracted in 4096 components = 0.000687549 Jy
! Clean residual min=-0.006052 max=0.005940 Jy/beam
! Clean residual mean=-0.000092 rms=0.001802 Jy/beam
! Combined flux in latest and established models = 0.0241545 Jy
keep
! Adding 399 model components to the UV plane model.
! The established model now contains 577 components and 0.0241545 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0714+8151_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.828 x 26.83 at 61.9 degrees (North through East)
! Clean map  min=-0.015972  max=0.020677 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0714+8151_S_a_map.fits
wmodel /image_prod/ug002_uva//J0714+8151_S_a_map.mod
! Writing 577 model components to file: /image_prod/ug002_uva//J0714+8151_S_a_map.mod
wobs   /image_prod/ug002_uva//J0714+8151_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0714+8151_S_a_uvs.fits
wwins  /image_prod/ug002_uva//J0714+8151_S_a_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0714+8151_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0206771 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00133047 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -19.3035 19.3035 38.607 77.2141
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0039 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.02 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  15.541 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0714+8151_S_a_dfm.log closed on Wed Mar  4 21:43:13 2020