! Started logfile: /image_prod/ug002_uva//J0711-0137_S_dfm.log on Wed Mar 4 21:41:58 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0711-0137_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0711-0137_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.626667 visibilities/baseline/integration-bin. ! Found source: J0711-0137 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 3807 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0711-0137_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021548Jy sigma=7.737852 ! Fit after self-cal, rms=0.862634Jy sigma=6.556624 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=7.359 mas, bpa=4.197 degrees ! Estimated noise=1.97923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108641 Jy ! Component: 100 - total flux cleaned = 0.13236 Jy ! Total flux subtracted in 100 components = 0.13236 Jy ! Clean residual min=-0.004756 max=0.006688 Jy/beam ! Clean residual mean=0.000000 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.13236 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.13236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070150Jy sigma=0.461743 ! Fit after self-cal, rms=0.070145Jy sigma=0.461691 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=8.351 mas, bpa=4.1 degrees ! Estimated noise=1.55589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572735 Jy ! Component: 100 - total flux cleaned = 0.00823482 Jy ! Component: 150 - total flux cleaned = 0.0090595 Jy ! Component: 200 - total flux cleaned = 0.00914624 Jy ! Total flux subtracted in 200 components = 0.00914624 Jy ! Clean residual min=-0.004499 max=0.004186 Jy/beam ! Clean residual mean=-0.000006 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.141506 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 28 components and 0.141506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069566Jy sigma=0.458625 ! Fit after self-cal, rms=0.069580Jy sigma=0.458595 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.713 x 8.351 at 4.1 degrees (North through East) ! Clean map min=-0.0044011 max=0.13853 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.01 KP 1.00 ! LA 1.09 MK 1.03 NL 0.99 OV 0.95 ! PT 1.07 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.02 KP 1.06 ! LA 1.05 MK 1.07 NL 0.89 OV 0.94 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.01 HN 1.01 KP 1.06 ! LA 1.07 MK 0.97 NL 0.87 OV 0.92 ! PT 1.10 SC 1.03 ! ! ! Fit before self-cal, rms=0.069580Jy sigma=0.458595 ! Fit after self-cal, rms=0.066434Jy sigma=0.450438 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.733 mas, bmaj=8.35 mas, bpa=4.093 degrees ! Estimated noise=1.5543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.94982e-05 Jy ! Component: 100 - total flux cleaned = 0.000174804 Jy ! Component: 150 - total flux cleaned = 0.000286286 Jy ! Component: 200 - total flux cleaned = 0.000380615 Jy ! Total flux subtracted in 200 components = 0.000380615 Jy ! Clean residual min=-0.002655 max=0.002752 Jy/beam ! Clean residual mean=0.000005 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.141887 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.141887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066414Jy sigma=0.450342 ! Fit after self-cal, rms=0.066428Jy sigma=0.450214 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066428Jy sigma=0.450214 ! Fit after self-cal, rms=0.065709Jy sigma=0.447509 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=8.356 mas, bpa=3.996 degrees ! Estimated noise=1.55947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268723 Jy ! Component: 100 - total flux cleaned = 0.000352569 Jy ! Component: 150 - total flux cleaned = 0.000416025 Jy ! Component: 200 - total flux cleaned = 0.000470479 Jy ! Total flux subtracted in 200 components = 0.000470479 Jy ! Clean residual min=-0.002557 max=0.002401 Jy/beam ! Clean residual mean=0.000005 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.142357 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.142357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065697Jy sigma=0.447467 ! Fit after self-cal, rms=0.065697Jy sigma=0.447444 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.53652e-06 Jy ! Component: 100 - total flux cleaned = 8.55802e-06 Jy ! Component: 150 - total flux cleaned = 8.63415e-06 Jy ! Component: 200 - total flux cleaned = 1.72792e-05 Jy ! Total flux subtracted in 200 components = 1.72792e-05 Jy ! Clean residual min=-0.002552 max=0.002407 Jy/beam ! Clean residual mean=0.000005 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.142374 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.142374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065693Jy sigma=0.447429 ! Fit after self-cal, rms=0.065693Jy sigma=0.447428 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065693Jy sigma=0.447428 ! Fit after self-cal, rms=0.065087Jy sigma=0.446699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.738 mas, bmaj=8.355 mas, bpa=4.001 degrees ! Estimated noise=1.55983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.67507e-05 Jy ! Component: 100 - total flux cleaned = 5.94534e-05 Jy ! Component: 150 - total flux cleaned = 9.90694e-05 Jy ! Component: 200 - total flux cleaned = 0.000117113 Jy ! Total flux subtracted in 200 components = 0.000117113 Jy ! Clean residual min=-0.002446 max=0.002294 Jy/beam ! Clean residual mean=0.000005 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.142491 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.142491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065084Jy sigma=0.446670 ! Fit after self-cal, rms=0.065079Jy sigma=0.446663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.45342e-06 Jy ! Component: 100 - total flux cleaned = 5.46528e-06 Jy ! Component: 150 - total flux cleaned = 1.36504e-05 Jy ! Component: 200 - total flux cleaned = 2.10518e-05 Jy ! Total flux subtracted in 200 components = 2.10518e-05 Jy ! Clean residual min=-0.002437 max=0.002280 Jy/beam ! Clean residual mean=0.000005 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.142512 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.142512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065077Jy sigma=0.446650 ! Fit after self-cal, rms=0.065077Jy sigma=0.446649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065077Jy sigma=0.446649 ! Fit after self-cal, rms=0.065067Jy sigma=0.446646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.15 mas, bmaj=12.84 mas, bpa=-6.773 degrees ! Estimated noise=1.84197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123198 Jy ! Component: 100 - total flux cleaned = -0.000103906 Jy ! Component: 150 - total flux cleaned = -0.000108516 Jy ! Component: 200 - total flux cleaned = -0.000108564 Jy ! Total flux subtracted in 200 components = -0.000108564 Jy ! Clean residual min=-0.002585 max=0.002625 Jy/beam ! Clean residual mean=0.000010 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.142404 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.142404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065067Jy sigma=0.446650 ! Fit after self-cal, rms=0.065066Jy sigma=0.446648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.58278e-05 Jy ! Component: 100 - total flux cleaned = -4.06868e-05 Jy ! Component: 150 - total flux cleaned = -4.11515e-05 Jy ! Component: 200 - total flux cleaned = -4.86147e-05 Jy ! Total flux subtracted in 200 components = -4.86147e-05 Jy ! Clean residual min=-0.002587 max=0.002618 Jy/beam ! Clean residual mean=0.000010 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.142355 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.142355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065067Jy sigma=0.446652 ! Fit after self-cal, rms=0.065067Jy sigma=0.446650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=8.356 mas, bpa=4.012 degrees ! Estimated noise=1.56031 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.739 x 8.356 at 4.012 degrees (North through East) ! Clean map min=-0.0023341 max=0.13858 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.371 mas, bpa=4.159 degrees ! Estimated noise=1.97993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108661 Jy ! Component: 100 - total flux cleaned = 0.132411 Jy ! Component: 150 - total flux cleaned = 0.137731 Jy ! Component: 200 - total flux cleaned = 0.139791 Jy ! Total flux subtracted in 200 components = 0.139791 Jy ! Clean residual min=-0.003382 max=0.003223 Jy/beam ! Clean residual mean=0.000005 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.139791 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.139791 Jy ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=8.356 mas, bpa=4.012 degrees ! Estimated noise=1.56031 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217079 Jy ! Component: 100 - total flux cleaned = 0.00267432 Jy ! Component: 150 - total flux cleaned = 0.00267626 Jy ! Component: 200 - total flux cleaned = 0.00269352 Jy ! Total flux subtracted in 200 components = 0.00269352 Jy ! Clean residual min=-0.002517 max=0.002302 Jy/beam ! Clean residual mean=0.000005 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.142484 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.142484 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.15 mas, bmaj=12.84 mas, bpa=-6.773 degrees ! Estimated noise=1.84197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010006 Jy ! Component: 100 - total flux cleaned = -0.000111011 Jy ! Component: 150 - total flux cleaned = -0.000111542 Jy ! Component: 200 - total flux cleaned = -0.000125232 Jy ! Total flux subtracted in 200 components = -0.000125232 Jy ! Clean residual min=-0.002598 max=0.002620 Jy/beam ! Clean residual mean=0.000010 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.142359 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.28203e-05 Jy ! Component: 100 - total flux cleaned = -1.90631e-05 Jy ! Component: 150 - total flux cleaned = -3.09618e-05 Jy ! Component: 200 - total flux cleaned = -3.69208e-05 Jy ! Total flux subtracted in 200 components = -3.69208e-05 Jy ! Clean residual min=-0.002597 max=0.002621 Jy/beam ! Clean residual mean=0.000010 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.142322 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.142322 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=8.356 mas, bpa=4.012 degrees ! Estimated noise=1.56031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127467 Jy ! Component: 100 - total flux cleaned = 0.000154924 Jy ! Component: 150 - total flux cleaned = 0.000154265 Jy ! Component: 200 - total flux cleaned = 0.000153986 Jy ! Total flux subtracted in 200 components = 0.000153986 Jy ! Clean residual min=-0.002480 max=0.002263 Jy/beam ! Clean residual mean=0.000005 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.142476 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.142476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065079Jy sigma=0.446703 ! Fit after self-cal, rms=0.065075Jy sigma=0.446693 wmodel J0711-0137_S_map.mod ! Writing 46 model components to file: J0711-0137_S_map.mod wobs J0711-0137_S_uvs.fits ! Writing UV FITS file: J0711-0137_S_uvs.fits wwins J0711-0137_S_map.win ! wwins: Wrote 1 windows to J0711-0137_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000549988 Jy ! Component: 100 - total flux cleaned = -0.000550644 Jy ! Component: 150 - total flux cleaned = -0.000318293 Jy ! Component: 200 - total flux cleaned = 5.47086e-05 Jy ! Component: 250 - total flux cleaned = 0.000379204 Jy ! Component: 300 - total flux cleaned = 0.000730058 Jy ! Component: 350 - total flux cleaned = 0.00107129 Jy ! Component: 400 - total flux cleaned = 0.00140355 Jy ! Component: 450 - total flux cleaned = 0.0016307 Jy ! Component: 500 - total flux cleaned = 0.00185216 Jy ! Component: 550 - total flux cleaned = 0.00213093 Jy ! Component: 600 - total flux cleaned = 0.00234273 Jy ! Component: 650 - total flux cleaned = 0.00252052 Jy ! Component: 700 - total flux cleaned = 0.00269538 Jy ! Component: 750 - total flux cleaned = 0.00280981 Jy ! Component: 800 - total flux cleaned = 0.00289378 Jy ! Component: 850 - total flux cleaned = 0.00303089 Jy ! Component: 900 - total flux cleaned = 0.00311134 Jy ! Component: 950 - total flux cleaned = 0.00316375 Jy ! Component: 1000 - total flux cleaned = 0.00326817 Jy ! Component: 1050 - total flux cleaned = 0.00334504 Jy ! Component: 1100 - total flux cleaned = 0.00332019 Jy ! Component: 1150 - total flux cleaned = 0.00337046 Jy ! Component: 1200 - total flux cleaned = 0.00332175 Jy ! Component: 1250 - total flux cleaned = 0.00341804 Jy ! Component: 1300 - total flux cleaned = 0.00341789 Jy ! Component: 1350 - total flux cleaned = 0.00346486 Jy ! Component: 1400 - total flux cleaned = 0.0034875 Jy ! Component: 1450 - total flux cleaned = 0.0035098 Jy ! Component: 1500 - total flux cleaned = 0.00353154 Jy ! Component: 1550 - total flux cleaned = 0.00357586 Jy ! Component: 1600 - total flux cleaned = 0.00364093 Jy ! Component: 1650 - total flux cleaned = 0.00376927 Jy ! Component: 1700 - total flux cleaned = 0.00379041 Jy ! Component: 1750 - total flux cleaned = 0.0037901 Jy ! Component: 1800 - total flux cleaned = 0.00385174 Jy ! Component: 1850 - total flux cleaned = 0.00387227 Jy ! Component: 1900 - total flux cleaned = 0.00387251 Jy ! Component: 1950 - total flux cleaned = 0.00393187 Jy ! Component: 2000 - total flux cleaned = 0.00395162 Jy ! Component: 2050 - total flux cleaned = 0.00399043 Jy ! Component: 2100 - total flux cleaned = 0.00402845 Jy ! Component: 2150 - total flux cleaned = 0.00406625 Jy ! Component: 2200 - total flux cleaned = 0.00402896 Jy ! Component: 2250 - total flux cleaned = 0.00402891 Jy ! Component: 2300 - total flux cleaned = 0.00404736 Jy ! Component: 2350 - total flux cleaned = 0.0040476 Jy ! Component: 2400 - total flux cleaned = 0.00417359 Jy ! Component: 2450 - total flux cleaned = 0.00413814 Jy ! Component: 2500 - total flux cleaned = 0.0041556 Jy ! Component: 2550 - total flux cleaned = 0.00420812 Jy ! Component: 2600 - total flux cleaned = 0.00429469 Jy ! Component: 2650 - total flux cleaned = 0.00434581 Jy ! Component: 2700 - total flux cleaned = 0.00446475 Jy ! Component: 2750 - total flux cleaned = 0.00454872 Jy ! Component: 2800 - total flux cleaned = 0.00461538 Jy ! Component: 2850 - total flux cleaned = 0.00468145 Jy ! Component: 2900 - total flux cleaned = 0.00473062 Jy ! Component: 2950 - total flux cleaned = 0.00482812 Jy ! Component: 3000 - total flux cleaned = 0.00479595 Jy ! Component: 3050 - total flux cleaned = 0.00486024 Jy ! Component: 3100 - total flux cleaned = 0.00492353 Jy ! Component: 3150 - total flux cleaned = 0.00497069 Jy ! Component: 3200 - total flux cleaned = 0.00497064 Jy ! Component: 3250 - total flux cleaned = 0.00503247 Jy ! Component: 3300 - total flux cleaned = 0.00495546 Jy ! Component: 3350 - total flux cleaned = 0.00500113 Jy ! Component: 3400 - total flux cleaned = 0.00501642 Jy ! Component: 3450 - total flux cleaned = 0.00509163 Jy ! Component: 3500 - total flux cleaned = 0.00512152 Jy ! Component: 3550 - total flux cleaned = 0.00513619 Jy ! Component: 3600 - total flux cleaned = 0.00510662 Jy ! Component: 3650 - total flux cleaned = 0.00512137 Jy ! Component: 3700 - total flux cleaned = 0.00512151 Jy ! Component: 3750 - total flux cleaned = 0.0052082 Jy ! Component: 3800 - total flux cleaned = 0.00517945 Jy ! Component: 3850 - total flux cleaned = 0.00515103 Jy ! Component: 3900 - total flux cleaned = 0.00517938 Jy ! Component: 3950 - total flux cleaned = 0.00519325 Jy ! Component: 4000 - total flux cleaned = 0.00520722 Jy ! Component: 4050 - total flux cleaned = 0.00523476 Jy ! Total flux subtracted in 4096 components = 0.00517965 Jy ! Clean residual min=-0.001076 max=0.000836 Jy/beam ! Clean residual mean=0.000002 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.147656 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 323 components and 0.147656 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0711-0137_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.739 x 8.356 at 4.012 degrees (North through East) ! Clean map min=-0.0017134 max=0.13854 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0711-0137_S_map.fits wmodel /image_prod/ug002_uva//J0711-0137_S_map.mod ! Writing 323 model components to file: /image_prod/ug002_uva//J0711-0137_S_map.mod wobs /image_prod/ug002_uva//J0711-0137_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0711-0137_S_uvs.fits wwins /image_prod/ug002_uva//J0711-0137_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0711-0137_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.138537 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254305 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.550693 0.550693 1.10139 2.20277 4.40554 8.81109 17.6222 35.2443 70.4887 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.138 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 544.768 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0711-0137_S_dfm.log closed on Wed Mar 4 21:42:01 2020