! Started logfile: /image_prod/ug002_uva//J0710-3850_S_dfm.log on Wed Mar  4 21:41:28 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0710-3850_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0710-3850_S_uva.fits
! AN table 1: 30 integrations on 21 of 21 possible baselines.
! AN table 2: 30 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.984354 visibilities/baseline/integration-bin.
! Found source: J0710-3850
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4341 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0710-3850_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.085547Jy  sigma=6.133214
! Fit after  self-cal, rms=0.711517Jy  sigma=3.780032
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.879 mas, bmaj=8.358 mas, bpa=-1.476 degrees
! Estimated noise=3.44215 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.245448 Jy
! Component: 100  -  total flux cleaned = 0.344683 Jy
! Total flux subtracted in 100 components = 0.344683 Jy
! Clean residual min=-0.023701 max=0.053508 Jy/beam
! Clean residual mean=-0.000295 rms=0.008348 Jy/beam
! Combined flux in latest and established models = 0.344683 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.344683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.141121Jy  sigma=0.817443
! Fit after  self-cal, rms=0.140440Jy  sigma=0.814295
! Inverting map 
! Added new window around map position (5, -9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0590954 Jy
! Component: 100  -  total flux cleaned = 0.095169 Jy
! Total flux subtracted in 100 components = 0.095169 Jy
! Clean residual min=-0.014947 max=0.021738 Jy/beam
! Clean residual mean=-0.000171 rms=0.004257 Jy/beam
! Combined flux in latest and established models = 0.439852 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 56 components and 0.439852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107157Jy  sigma=0.571432
! Fit after  self-cal, rms=0.106486Jy  sigma=0.569624
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.509 mas, bmaj=10.42 mas, bpa=-3.66 degrees
! Estimated noise=1.96596 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.5, 3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0345812 Jy
! Component: 100  -  total flux cleaned = 0.0543645 Jy
! Component: 150  -  total flux cleaned = 0.0666864 Jy
! Component: 200  -  total flux cleaned = 0.0745245 Jy
! Total flux subtracted in 200 components = 0.0745245 Jy
! Clean residual min=-0.012240 max=0.012084 Jy/beam
! Clean residual mean=-0.000083 rms=0.003110 Jy/beam
! Combined flux in latest and established models = 0.514376 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 116 components and 0.514376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096438Jy  sigma=0.486527
! Fit after  self-cal, rms=0.095697Jy  sigma=0.482698
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.509 x 10.42 at -3.66 degrees (North through East)
! Clean map  min=-0.011111  max=0.26032 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.37     KP        0.98     LA        0.96     
!   NL        1.00     OV        0.99     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.95     KP        1.02     LA        0.98     MK        0.94     
!   NL        1.14     OV        0.97     PT        1.00     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.36     KP        0.96     LA        0.98     
!   NL        1.12     OV        1.01     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.95     KP        0.97     LA        0.97     MK        0.94     
!   NL        1.24     OV        0.98     PT        1.02     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.39     KP        0.95     LA        0.99     
!   NL        0.98     OV        0.99     PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        0.94     LA        1.00     MK        1.11     
!   NL        1.12     OV        0.95     PT        1.02     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.095697Jy  sigma=0.482698
! Fit after  self-cal, rms=0.101086Jy  sigma=0.460061
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.534 mas, bmaj=10.34 mas, bpa=-3.414 degrees
! Estimated noise=1.99284 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000757941 Jy
! Component: 100  -  total flux cleaned = -0.000752488 Jy
! Component: 150  -  total flux cleaned = -0.00062186 Jy
! Component: 200  -  total flux cleaned = -0.000512232 Jy
! Total flux subtracted in 200 components = -0.000512232 Jy
! Clean residual min=-0.007112 max=0.008451 Jy/beam
! Clean residual mean=-0.000026 rms=0.001965 Jy/beam
! Combined flux in latest and established models = 0.513864 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 137 components and 0.513864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100602Jy  sigma=0.458700
! Fit after  self-cal, rms=0.100798Jy  sigma=0.458543
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100798Jy  sigma=0.458543
! Fit after  self-cal, rms=0.101510Jy  sigma=0.458472
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.524 mas, bmaj=10.31 mas, bpa=-3.508 degrees
! Estimated noise=1.98885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000903596 Jy
! Component: 100  -  total flux cleaned = -0.000910612 Jy
! Component: 150  -  total flux cleaned = -0.000906552 Jy
! Component: 200  -  total flux cleaned = -0.000808948 Jy
! Total flux subtracted in 200 components = -0.000808948 Jy
! Clean residual min=-0.006737 max=0.008250 Jy/beam
! Clean residual mean=-0.000024 rms=0.001906 Jy/beam
! Combined flux in latest and established models = 0.513055 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 140 components and 0.513055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101188Jy  sigma=0.457656
! Fit after  self-cal, rms=0.101238Jy  sigma=0.457614
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17.5, -16.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00713196 Jy
! Component: 100  -  total flux cleaned = 0.0084182 Jy
! Component: 150  -  total flux cleaned = 0.00889093 Jy
! Component: 200  -  total flux cleaned = 0.00897213 Jy
! Total flux subtracted in 200 components = 0.00897213 Jy
! Clean residual min=-0.005911 max=0.006106 Jy/beam
! Clean residual mean=0.000018 rms=0.001667 Jy/beam
! Combined flux in latest and established models = 0.522028 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 162 components and 0.522028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100716Jy  sigma=0.454501
! Fit after  self-cal, rms=0.100632Jy  sigma=0.454100
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100632Jy  sigma=0.454100
! Fit after  self-cal, rms=0.101501Jy  sigma=0.453755
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.514 mas, bmaj=10.27 mas, bpa=-3.569 degrees
! Estimated noise=1.98389 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160994 Jy
! Component: 100  -  total flux cleaned = 0.00177639 Jy
! Component: 150  -  total flux cleaned = 0.00192252 Jy
! Component: 200  -  total flux cleaned = 0.0020536 Jy
! Total flux subtracted in 200 components = 0.0020536 Jy
! Clean residual min=-0.005423 max=0.005956 Jy/beam
! Clean residual mean=0.000024 rms=0.001566 Jy/beam
! Combined flux in latest and established models = 0.524081 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 176 components and 0.524081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101316Jy  sigma=0.453002
! Fit after  self-cal, rms=0.101329Jy  sigma=0.452941
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000760559 Jy
! Component: 100  -  total flux cleaned = 0.000883826 Jy
! Component: 150  -  total flux cleaned = 0.000999378 Jy
! Component: 200  -  total flux cleaned = 0.00105099 Jy
! Total flux subtracted in 200 components = 0.00105099 Jy
! Clean residual min=-0.005174 max=0.006023 Jy/beam
! Clean residual mean=0.000028 rms=0.001545 Jy/beam
! Combined flux in latest and established models = 0.525132 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 182 components and 0.525132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101229Jy  sigma=0.452662
! Fit after  self-cal, rms=0.101243Jy  sigma=0.452649
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101243Jy  sigma=0.452649
! Fit after  self-cal, rms=0.101921Jy  sigma=0.452538
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.136 mas, bmaj=34.14 mas, bpa=-6.373 degrees
! Estimated noise=2.24632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000977336 Jy
! Component: 100  -  total flux cleaned = 0.00103887 Jy
! Component: 150  -  total flux cleaned = 0.000968724 Jy
! Component: 200  -  total flux cleaned = 0.000937513 Jy
! Total flux subtracted in 200 components = 0.000937513 Jy
! Clean residual min=-0.006685 max=0.007529 Jy/beam
! Clean residual mean=0.000047 rms=0.002150 Jy/beam
! Combined flux in latest and established models = 0.52607 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 193 components and 0.52607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101869Jy  sigma=0.452398
! Fit after  self-cal, rms=0.101892Jy  sigma=0.452372
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000195491 Jy
! Component: 100  -  total flux cleaned = 0.000226961 Jy
! Component: 150  -  total flux cleaned = 0.000197828 Jy
! Component: 200  -  total flux cleaned = 0.000167604 Jy
! Total flux subtracted in 200 components = 0.000167604 Jy
! Clean residual min=-0.006685 max=0.007586 Jy/beam
! Clean residual mean=0.000048 rms=0.002146 Jy/beam
! Combined flux in latest and established models = 0.526237 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 200 components and 0.526237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101864Jy  sigma=0.452316
! Fit after  self-cal, rms=0.101872Jy  sigma=0.452303
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.502 mas, bmaj=10.24 mas, bpa=-3.647 degrees
! Estimated noise=1.9794 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.502 x 10.24 at -3.647 degrees (North through East)
! Clean map  min=-0.0051685  max=0.26638 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.852 mas, bmaj=8.194 mas, bpa=-1.367 degrees
! Estimated noise=3.49327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.24909 Jy
! Component: 100  -  total flux cleaned = 0.347579 Jy
! Component: 150  -  total flux cleaned = 0.402366 Jy
! Component: 200  -  total flux cleaned = 0.435281 Jy
! Total flux subtracted in 200 components = 0.435281 Jy
! Clean residual min=-0.012348 max=0.017053 Jy/beam
! Clean residual mean=-0.000161 rms=0.003517 Jy/beam
! Combined flux in latest and established models = 0.435281 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 59 model components to the UV plane model.
! The established model now contains 59 components and 0.435281 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.502 mas, bmaj=10.24 mas, bpa=-3.647 degrees
! Estimated noise=1.9794 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0297926 Jy
! Component: 100  -  total flux cleaned = 0.0483122 Jy
! Component: 150  -  total flux cleaned = 0.0605669 Jy
! Component: 200  -  total flux cleaned = 0.0688735 Jy
! Total flux subtracted in 200 components = 0.0688735 Jy
! Clean residual min=-0.006278 max=0.005994 Jy/beam
! Clean residual mean=-0.000057 rms=0.001829 Jy/beam
! Combined flux in latest and established models = 0.504154 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 133 components and 0.504154 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.136 mas, bmaj=34.14 mas, bpa=-6.373 degrees
! Estimated noise=2.24632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00834287 Jy
! Component: 100  -  total flux cleaned = 0.0131436 Jy
! Component: 150  -  total flux cleaned = 0.0161982 Jy
! Component: 200  -  total flux cleaned = 0.0181768 Jy
! Total flux subtracted in 200 components = 0.0181768 Jy
! Clean residual min=-0.006804 max=0.007126 Jy/beam
! Clean residual mean=0.000021 rms=0.002173 Jy/beam
! Combined flux in latest and established models = 0.522331 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000583565 Jy
! Component: 100  -  total flux cleaned = 0.000923014 Jy
! Component: 150  -  total flux cleaned = 0.00121484 Jy
! Component: 200  -  total flux cleaned = 0.00136322 Jy
! Total flux subtracted in 200 components = 0.00136322 Jy
! Clean residual min=-0.006700 max=0.007326 Jy/beam
! Clean residual mean=0.000028 rms=0.002137 Jy/beam
! Combined flux in latest and established models = 0.523694 Jy
! Adding 92 model components to the UV plane model.
! The established model now contains 218 components and 0.523694 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.502 mas, bmaj=10.24 mas, bpa=-3.647 degrees
! Estimated noise=1.9794 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.46524e-05 Jy
! Component: 100  -  total flux cleaned = -0.000138322 Jy
! Component: 150  -  total flux cleaned = -0.00028243 Jy
! Component: 200  -  total flux cleaned = -0.000416356 Jy
! Total flux subtracted in 200 components = -0.000416356 Jy
! Clean residual min=-0.005684 max=0.005271 Jy/beam
! Clean residual mean=0.000016 rms=0.001488 Jy/beam
! Combined flux in latest and established models = 0.523278 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 233 components and 0.523278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101863Jy  sigma=0.452222
! Fit after  self-cal, rms=0.101816Jy  sigma=0.451925
wmodel J0710-3850_S_map.mod
! Writing 233 model components to file: J0710-3850_S_map.mod
wobs   J0710-3850_S_uvs.fits
! Writing UV FITS file: J0710-3850_S_uvs.fits
wwins  J0710-3850_S_map.win
! wwins: Wrote 4 windows to J0710-3850_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167409 Jy
! Component: 100  -  total flux cleaned = 0.000588226 Jy
! Component: 150  -  total flux cleaned = 0.00113836 Jy
! Component: 200  -  total flux cleaned = 0.00114143 Jy
! Component: 250  -  total flux cleaned = 0.0011429 Jy
! Component: 300  -  total flux cleaned = 0.00133453 Jy
! Component: 350  -  total flux cleaned = 0.0014566 Jy
! Component: 400  -  total flux cleaned = 0.00134153 Jy
! Component: 450  -  total flux cleaned = 0.00117541 Jy
! Component: 500  -  total flux cleaned = 0.000803309 Jy
! Component: 550  -  total flux cleaned = 0.000496501 Jy
! Component: 600  -  total flux cleaned = 5.35274e-05 Jy
! Component: 650  -  total flux cleaned = -0.000420601 Jy
! Component: 700  -  total flux cleaned = -0.000742127 Jy
! Component: 750  -  total flux cleaned = -0.0010552 Jy
! Component: 800  -  total flux cleaned = -0.00149031 Jy
! Component: 850  -  total flux cleaned = -0.00187197 Jy
! Component: 900  -  total flux cleaned = -0.00236756 Jy
! Component: 950  -  total flux cleaned = -0.00276941 Jy
! Component: 1000  -  total flux cleaned = -0.0030839 Jy
! Component: 1050  -  total flux cleaned = -0.00331372 Jy
! Component: 1100  -  total flux cleaned = -0.0033516 Jy
! Component: 1150  -  total flux cleaned = -0.00338951 Jy
! Component: 1200  -  total flux cleaned = -0.00349884 Jy
! Component: 1250  -  total flux cleaned = -0.00353493 Jy
! Component: 1300  -  total flux cleaned = -0.00367525 Jy
! Component: 1350  -  total flux cleaned = -0.00367572 Jy
! Component: 1400  -  total flux cleaned = -0.00384487 Jy
! Component: 1450  -  total flux cleaned = -0.00374505 Jy
! Component: 1500  -  total flux cleaned = -0.00384389 Jy
! Component: 1550  -  total flux cleaned = -0.00381182 Jy
! Component: 1600  -  total flux cleaned = -0.00381213 Jy
! Component: 1650  -  total flux cleaned = -0.00390594 Jy
! Component: 1700  -  total flux cleaned = -0.00399812 Jy
! Component: 1750  -  total flux cleaned = -0.00393763 Jy
! Component: 1800  -  total flux cleaned = -0.00393798 Jy
! Component: 1850  -  total flux cleaned = -0.00402667 Jy
! Component: 1900  -  total flux cleaned = -0.00402664 Jy
! Component: 1950  -  total flux cleaned = -0.00396881 Jy
! Component: 2000  -  total flux cleaned = -0.00396914 Jy
! Component: 2050  -  total flux cleaned = -0.00396926 Jy
! Component: 2100  -  total flux cleaned = -0.00399706 Jy
! Component: 2150  -  total flux cleaned = -0.00396972 Jy
! Component: 2200  -  total flux cleaned = -0.00391567 Jy
! Component: 2250  -  total flux cleaned = -0.00388889 Jy
! Component: 2300  -  total flux cleaned = -0.00386297 Jy
! Component: 2350  -  total flux cleaned = -0.00391536 Jy
! Component: 2400  -  total flux cleaned = -0.00391519 Jy
! Component: 2450  -  total flux cleaned = -0.00383921 Jy
! Component: 2500  -  total flux cleaned = -0.00388989 Jy
! Component: 2550  -  total flux cleaned = -0.00396399 Jy
! Component: 2600  -  total flux cleaned = -0.00393921 Jy
! Component: 2650  -  total flux cleaned = -0.00393934 Jy
! Component: 2700  -  total flux cleaned = -0.00401147 Jy
! Component: 2750  -  total flux cleaned = -0.00396409 Jy
! Component: 2800  -  total flux cleaned = -0.00408153 Jy
! Component: 2850  -  total flux cleaned = -0.00408151 Jy
! Component: 2900  -  total flux cleaned = -0.00412746 Jy
! Component: 2950  -  total flux cleaned = -0.00417339 Jy
! Component: 3000  -  total flux cleaned = -0.00419614 Jy
! Component: 3050  -  total flux cleaned = -0.00415163 Jy
! Component: 3100  -  total flux cleaned = -0.0041741 Jy
! Component: 3150  -  total flux cleaned = -0.00415204 Jy
! Component: 3200  -  total flux cleaned = -0.00410845 Jy
! Component: 3250  -  total flux cleaned = -0.00410851 Jy
! Component: 3300  -  total flux cleaned = -0.00400127 Jy
! Component: 3350  -  total flux cleaned = -0.00400125 Jy
! Component: 3400  -  total flux cleaned = -0.00393792 Jy
! Component: 3450  -  total flux cleaned = -0.00383317 Jy
! Component: 3500  -  total flux cleaned = -0.0038539 Jy
! Component: 3550  -  total flux cleaned = -0.00377122 Jy
! Component: 3600  -  total flux cleaned = -0.00373014 Jy
! Component: 3650  -  total flux cleaned = -0.00364854 Jy
! Component: 3700  -  total flux cleaned = -0.00354722 Jy
! Component: 3750  -  total flux cleaned = -0.00346674 Jy
! Component: 3800  -  total flux cleaned = -0.00340664 Jy
! Component: 3850  -  total flux cleaned = -0.00332707 Jy
! Component: 3900  -  total flux cleaned = -0.00330727 Jy
! Component: 3950  -  total flux cleaned = -0.00316948 Jy
! Component: 4000  -  total flux cleaned = -0.00314978 Jy
! Component: 4050  -  total flux cleaned = -0.00305226 Jy
! Total flux subtracted in 4096 components = -0.00293572 Jy
! Clean residual min=-0.001069 max=0.001143 Jy/beam
! Clean residual mean=0.000007 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.520342 Jy
keep
! Adding 338 model components to the UV plane model.
! The established model now contains 571 components and 0.520343 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0710-3850_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.502 x 10.24 at -3.647 degrees (North through East)
! Clean map  min=-0.0030643  max=0.27254 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0710-3850_S_map.fits
wmodel /image_prod/ug002_uva//J0710-3850_S_map.mod
! Writing 571 model components to file: /image_prod/ug002_uva//J0710-3850_S_map.mod
wobs   /image_prod/ug002_uva//J0710-3850_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0710-3850_S_uvs.fits
wwins  /image_prod/ug002_uva//J0710-3850_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0710-3850_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.272542 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000382488 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.421024 0.421024 0.842047 1.68409 3.36819 6.73638 13.4728 26.9455 53.891
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.272 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  712.549 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0710-3850_S_dfm.log closed on Wed Mar  4 21:41:32 2020