! Started logfile: /image_prod/ug002_uva//J0710+4220_X_dfm.log on Wed Mar  4 21:41:12 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0710+4220_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0710+4220_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.907407 visibilities/baseline/integration-bin.
! Found source: J0710+4220
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0710+4220_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001166Jy  sigma=9.043040
! Fit after  self-cal, rms=0.894172Jy  sigma=8.065546
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7525 mas, bmaj=1.22 mas, bpa=13.15 degrees
! Estimated noise=1.07428 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0746281 Jy
! Component: 100  -  total flux cleaned = 0.0951791 Jy
! Total flux subtracted in 100 components = 0.0951791 Jy
! Clean residual min=-0.006481 max=0.018093 Jy/beam
! Clean residual mean=0.000017 rms=0.001554 Jy/beam
! Combined flux in latest and established models = 0.0951791 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0951791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065764Jy  sigma=0.574413
! Fit after  self-cal, rms=0.065721Jy  sigma=0.573881
! Inverting map 
! Added new window around map position (1, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162669 Jy
! Component: 100  -  total flux cleaned = 0.0248206 Jy
! Total flux subtracted in 100 components = 0.0248206 Jy
! Clean residual min=-0.004785 max=0.008466 Jy/beam
! Clean residual mean=0.000010 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.12 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.12 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059951Jy  sigma=0.518806
! Fit after  self-cal, rms=0.059492Jy  sigma=0.514565
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00781722 Jy
! Component: 100  -  total flux cleaned = 0.0120582 Jy
! Total flux subtracted in 100 components = 0.0120582 Jy
! Clean residual min=-0.004387 max=0.005645 Jy/beam
! Clean residual mean=0.000006 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.132058 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.132058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058040Jy  sigma=0.500746
! Fit after  self-cal, rms=0.057888Jy  sigma=0.499262
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.592 mas, bpa=13.67 degrees
! Estimated noise=0.517012 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, -4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00787541 Jy
! Component: 100  -  total flux cleaned = 0.0130371 Jy
! Component: 150  -  total flux cleaned = 0.0171323 Jy
! Component: 200  -  total flux cleaned = 0.0204474 Jy
! Total flux subtracted in 200 components = 0.0204474 Jy
! Clean residual min=-0.004048 max=0.004611 Jy/beam
! Clean residual mean=-0.000004 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 0.152505 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 67 components and 0.152505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056515Jy  sigma=0.486489
! Fit after  self-cal, rms=0.056422Jy  sigma=0.485495
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.003 x 1.592 at 13.67 degrees (North through East)
! Clean map  min=-0.0037287  max=0.10141 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     KP        1.07     LA        0.96     
!   MK        1.04     NL        1.10     OV        0.94     PT        0.87     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.02     KP        1.07     LA        1.02     
!   MK        1.05     NL        1.14     OV        0.95     PT        0.86     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     KP        1.08     LA        0.96     
!   MK        1.04     NL        1.20     OV        0.95     PT        0.88     
!   SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     KP        1.07     LA        1.01     
!   MK        1.07     NL        1.15     OV        0.94     PT        0.86     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     KP        1.10     LA        0.98     
!   MK        1.02     NL        1.14     OV        0.92     PT        0.88     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     KP        1.13     LA        1.01     
!   MK        1.02     NL        1.14     OV        0.91     PT        0.86     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     KP        1.08     LA        0.96     
!   MK        1.07     NL        1.12     OV        0.92     PT        0.89     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     KP        1.09     LA        0.97     
!   MK        1.07     NL        1.14     OV        0.92     PT        0.89     
!   SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     KP        1.09     LA        0.97     
!   MK        1.06     NL        1.13     OV        0.93     PT        0.90     
!   SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     KP        1.05     LA        0.97     
!   MK        1.03     NL        1.12     OV        0.92     PT        0.87     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     KP        1.07     LA        0.97     
!   MK        1.01     NL        1.13     OV        0.94     PT        0.90     
!   SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     KP        1.06     LA        1.02     
!   MK        1.00     NL        1.19     OV        0.95     PT        0.91     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.056422Jy  sigma=0.485495
! Fit after  self-cal, rms=0.054345Jy  sigma=0.473834
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.603 mas, bpa=14.25 degrees
! Estimated noise=0.512481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.4, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00345089 Jy
! Component: 100  -  total flux cleaned = 0.00578459 Jy
! Component: 150  -  total flux cleaned = 0.00753714 Jy
! Component: 200  -  total flux cleaned = 0.00865924 Jy
! Total flux subtracted in 200 components = 0.00865924 Jy
! Clean residual min=-0.001868 max=0.002169 Jy/beam
! Clean residual mean=-0.000013 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.161165 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 92 components and 0.161165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054063Jy  sigma=0.471132
! Fit after  self-cal, rms=0.054079Jy  sigma=0.470842
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054079Jy  sigma=0.470842
! Fit after  self-cal, rms=0.054408Jy  sigma=0.468833
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=1.599 mas, bpa=14 degrees
! Estimated noise=0.513032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134308 Jy
! Component: 100  -  total flux cleaned = 0.00221291 Jy
! Component: 150  -  total flux cleaned = 0.00289811 Jy
! Component: 200  -  total flux cleaned = 0.00326364 Jy
! Total flux subtracted in 200 components = 0.00326364 Jy
! Clean residual min=-0.001513 max=0.001804 Jy/beam
! Clean residual mean=-0.000006 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.164428 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 110 components and 0.164428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054341Jy  sigma=0.468176
! Fit after  self-cal, rms=0.054348Jy  sigma=0.468109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.2, 22).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144177 Jy
! Component: 100  -  total flux cleaned = 0.00209637 Jy
! Component: 150  -  total flux cleaned = 0.00265714 Jy
! Component: 200  -  total flux cleaned = 0.00309468 Jy
! Total flux subtracted in 200 components = 0.00309468 Jy
! Clean residual min=-0.001389 max=0.001565 Jy/beam
! Clean residual mean=-0.000009 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.167523 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 133 components and 0.167523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054294Jy  sigma=0.467580
! Fit after  self-cal, rms=0.054290Jy  sigma=0.467547
! Inverting map 
! Added new window around map position (11.8, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157634 Jy
! Component: 100  -  total flux cleaned = 0.00233495 Jy
! Component: 150  -  total flux cleaned = 0.00286325 Jy
! Component: 200  -  total flux cleaned = 0.00324596 Jy
! Total flux subtracted in 200 components = 0.00324596 Jy
! Clean residual min=-0.001223 max=0.001256 Jy/beam
! Clean residual mean=-0.000008 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.170769 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 159 components and 0.170769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054236Jy  sigma=0.467017
! Fit after  self-cal, rms=0.054228Jy  sigma=0.466960
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054228Jy  sigma=0.466960
! Fit after  self-cal, rms=0.054171Jy  sigma=0.466862
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.596 mas, bpa=13.87 degrees
! Estimated noise=0.512445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000735205 Jy
! Component: 100  -  total flux cleaned = 0.00121324 Jy
! Component: 150  -  total flux cleaned = 0.00165558 Jy
! Component: 200  -  total flux cleaned = 0.00191802 Jy
! Total flux subtracted in 200 components = 0.00191802 Jy
! Clean residual min=-0.001126 max=0.001272 Jy/beam
! Clean residual mean=-0.000006 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.172687 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 175 components and 0.172687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054147Jy  sigma=0.466625
! Fit after  self-cal, rms=0.054145Jy  sigma=0.466606
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000927279 Jy
! Component: 100  -  total flux cleaned = 0.0010367 Jy
! Component: 150  -  total flux cleaned = 0.00120712 Jy
! Component: 200  -  total flux cleaned = 0.00136019 Jy
! Total flux subtracted in 200 components = 0.00136019 Jy
! Clean residual min=-0.001044 max=0.001058 Jy/beam
! Clean residual mean=-0.000006 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.174047 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 192 components and 0.174047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054113Jy  sigma=0.466297
! Fit after  self-cal, rms=0.054110Jy  sigma=0.466273
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054110Jy  sigma=0.466273
! Fit after  self-cal, rms=0.054019Jy  sigma=0.466228
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.377 mas, bmaj=2.96 mas, bpa=24.96 degrees
! Estimated noise=0.619703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000967208 Jy
! Component: 100  -  total flux cleaned = 0.00151012 Jy
! Component: 150  -  total flux cleaned = 0.00173042 Jy
! Component: 200  -  total flux cleaned = 0.00180665 Jy
! Total flux subtracted in 200 components = 0.00180665 Jy
! Clean residual min=-0.001223 max=0.001497 Jy/beam
! Clean residual mean=-0.000012 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.175854 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 213 components and 0.175854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054007Jy  sigma=0.466092
! Fit after  self-cal, rms=0.054006Jy  sigma=0.466077
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15.4, -10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136078 Jy
! Component: 100  -  total flux cleaned = 0.00219786 Jy
! Component: 150  -  total flux cleaned = 0.00282129 Jy
! Component: 200  -  total flux cleaned = 0.00315162 Jy
! Total flux subtracted in 200 components = 0.00315162 Jy
! Clean residual min=-0.001015 max=0.000948 Jy/beam
! Clean residual mean=-0.000008 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.179005 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 252 components and 0.179005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053982Jy  sigma=0.465847
! Fit after  self-cal, rms=0.053980Jy  sigma=0.465820
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.596 mas, bpa=13.81 degrees
! Estimated noise=0.511753 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 1.596 at 13.81 degrees (North through East)
! Clean map  min=-0.0008226  max=0.099697 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7576 mas, bmaj=1.219 mas, bpa=13.1 degrees
! Estimated noise=1.07119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0740657 Jy
! Component: 100  -  total flux cleaned = 0.0996363 Jy
! Component: 150  -  total flux cleaned = 0.113378 Jy
! Component: 200  -  total flux cleaned = 0.121772 Jy
! Total flux subtracted in 200 components = 0.121772 Jy
! Clean residual min=-0.002924 max=0.004477 Jy/beam
! Clean residual mean=0.000006 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.121772 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.121772 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.596 mas, bpa=13.81 degrees
! Estimated noise=0.511753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00945427 Jy
! Component: 100  -  total flux cleaned = 0.0154838 Jy
! Component: 150  -  total flux cleaned = 0.0202698 Jy
! Component: 200  -  total flux cleaned = 0.0242667 Jy
! Total flux subtracted in 200 components = 0.0242667 Jy
! Clean residual min=-0.002073 max=0.002442 Jy/beam
! Clean residual mean=-0.000002 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.146039 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 58 components and 0.146039 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.377 mas, bmaj=2.96 mas, bpa=24.96 degrees
! Estimated noise=0.619703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00581118 Jy
! Component: 100  -  total flux cleaned = 0.0101823 Jy
! Component: 150  -  total flux cleaned = 0.0135938 Jy
! Component: 200  -  total flux cleaned = 0.0163413 Jy
! Total flux subtracted in 200 components = 0.0163413 Jy
! Clean residual min=-0.001933 max=0.001671 Jy/beam
! Clean residual mean=-0.000006 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.16238 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00230832 Jy
! Component: 100  -  total flux cleaned = 0.00426636 Jy
! Component: 150  -  total flux cleaned = 0.00594905 Jy
! Component: 200  -  total flux cleaned = 0.00740577 Jy
! Total flux subtracted in 200 components = 0.00740577 Jy
! Clean residual min=-0.001517 max=0.001139 Jy/beam
! Clean residual mean=-0.000005 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.169786 Jy
! Adding 143 model components to the UV plane model.
! The established model now contains 186 components and 0.169786 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.596 mas, bpa=13.81 degrees
! Estimated noise=0.511753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132271 Jy
! Component: 100  -  total flux cleaned = 0.00242073 Jy
! Component: 150  -  total flux cleaned = 0.00339441 Jy
! Component: 200  -  total flux cleaned = 0.00413472 Jy
! Total flux subtracted in 200 components = 0.00413472 Jy
! Clean residual min=-0.001080 max=0.000998 Jy/beam
! Clean residual mean=-0.000003 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.173921 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 222 components and 0.173921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054033Jy  sigma=0.466178
! Fit after  self-cal, rms=0.054012Jy  sigma=0.466068
wmodel J0710+4220_X_map.mod
! Writing 222 model components to file: J0710+4220_X_map.mod
wobs   J0710+4220_X_uvs.fits
! Writing UV FITS file: J0710+4220_X_uvs.fits
wwins  J0710+4220_X_map.win
! wwins: Wrote 8 windows to J0710+4220_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000307633 Jy
! Component: 100  -  total flux cleaned = -0.000589042 Jy
! Component: 150  -  total flux cleaned = -0.00072296 Jy
! Component: 200  -  total flux cleaned = -0.000755025 Jy
! Component: 250  -  total flux cleaned = -0.000786258 Jy
! Component: 300  -  total flux cleaned = -0.000771231 Jy
! Component: 350  -  total flux cleaned = -0.000816034 Jy
! Component: 400  -  total flux cleaned = -0.000815804 Jy
! Component: 450  -  total flux cleaned = -0.0008013 Jy
! Component: 500  -  total flux cleaned = -0.000786858 Jy
! Component: 550  -  total flux cleaned = -0.000745337 Jy
! Component: 600  -  total flux cleaned = -0.000758577 Jy
! Component: 650  -  total flux cleaned = -0.000771801 Jy
! Component: 700  -  total flux cleaned = -0.00077148 Jy
! Component: 750  -  total flux cleaned = -0.000797355 Jy
! Component: 800  -  total flux cleaned = -0.000810025 Jy
! Component: 850  -  total flux cleaned = -0.000848 Jy
! Component: 900  -  total flux cleaned = -0.000822757 Jy
! Component: 950  -  total flux cleaned = -0.000822911 Jy
! Component: 1000  -  total flux cleaned = -0.000847527 Jy
! Component: 1050  -  total flux cleaned = -0.000896026 Jy
! Component: 1100  -  total flux cleaned = -0.00090814 Jy
! Component: 1150  -  total flux cleaned = -0.000955803 Jy
! Component: 1200  -  total flux cleaned = -0.00101434 Jy
! Component: 1250  -  total flux cleaned = -0.00104891 Jy
! Component: 1300  -  total flux cleaned = -0.0010834 Jy
! Component: 1350  -  total flux cleaned = -0.00111771 Jy
! Component: 1400  -  total flux cleaned = -0.00121912 Jy
! Component: 1450  -  total flux cleaned = -0.00127486 Jy
! Component: 1500  -  total flux cleaned = -0.00133021 Jy
! Component: 1550  -  total flux cleaned = -0.00139606 Jy
! Component: 1600  -  total flux cleaned = -0.00148298 Jy
! Component: 1650  -  total flux cleaned = -0.00148295 Jy
! Component: 1700  -  total flux cleaned = -0.00158973 Jy
! Component: 1750  -  total flux cleaned = -0.00160053 Jy
! Component: 1800  -  total flux cleaned = -0.00166349 Jy
! Component: 1850  -  total flux cleaned = -0.0016948 Jy
! Component: 1900  -  total flux cleaned = -0.00173613 Jy
! Component: 1950  -  total flux cleaned = -0.00176679 Jy
! Component: 2000  -  total flux cleaned = -0.00183796 Jy
! Component: 2050  -  total flux cleaned = -0.00183779 Jy
! Component: 2100  -  total flux cleaned = -0.00187788 Jy
! Component: 2150  -  total flux cleaned = -0.00193755 Jy
! Component: 2200  -  total flux cleaned = -0.00196716 Jy
! Component: 2250  -  total flux cleaned = -0.00203587 Jy
! Component: 2300  -  total flux cleaned = -0.00208465 Jy
! Component: 2350  -  total flux cleaned = -0.00207496 Jy
! Component: 2400  -  total flux cleaned = -0.00214227 Jy
! Component: 2450  -  total flux cleaned = -0.00221851 Jy
! Component: 2500  -  total flux cleaned = -0.00225646 Jy
! Component: 2550  -  total flux cleaned = -0.00225643 Jy
! Component: 2600  -  total flux cleaned = -0.00225652 Jy
! Component: 2650  -  total flux cleaned = -0.00236806 Jy
! Component: 2700  -  total flux cleaned = -0.00240492 Jy
! Component: 2750  -  total flux cleaned = -0.00246004 Jy
! Component: 2800  -  total flux cleaned = -0.00247823 Jy
! Component: 2850  -  total flux cleaned = -0.00250548 Jy
! Component: 2900  -  total flux cleaned = -0.00252354 Jy
! Component: 2950  -  total flux cleaned = -0.00263097 Jy
! Component: 3000  -  total flux cleaned = -0.00265755 Jy
! Component: 3050  -  total flux cleaned = -0.00270183 Jy
! Component: 3100  -  total flux cleaned = -0.00273693 Jy
! Component: 3150  -  total flux cleaned = -0.00276312 Jy
! Component: 3200  -  total flux cleaned = -0.00278048 Jy
! Component: 3250  -  total flux cleaned = -0.00282356 Jy
! Component: 3300  -  total flux cleaned = -0.00286649 Jy
! Component: 3350  -  total flux cleaned = -0.00287492 Jy
! Component: 3400  -  total flux cleaned = -0.00288343 Jy
! Component: 3450  -  total flux cleaned = -0.0028834 Jy
! Component: 3500  -  total flux cleaned = -0.00291692 Jy
! Component: 3550  -  total flux cleaned = -0.00294197 Jy
! Component: 3600  -  total flux cleaned = -0.00295863 Jy
! Component: 3650  -  total flux cleaned = -0.00302464 Jy
! Component: 3700  -  total flux cleaned = -0.00299999 Jy
! Component: 3750  -  total flux cleaned = -0.00299173 Jy
! Component: 3800  -  total flux cleaned = -0.0030242 Jy
! Component: 3850  -  total flux cleaned = -0.00302418 Jy
! Component: 3900  -  total flux cleaned = -0.00304021 Jy
! Component: 3950  -  total flux cleaned = -0.00305624 Jy
! Component: 4000  -  total flux cleaned = -0.0030722 Jy
! Component: 4050  -  total flux cleaned = -0.003088 Jy
! Total flux subtracted in 4096 components = -0.00310371 Jy
! Clean residual min=-0.000523 max=0.000508 Jy/beam
! Clean residual mean=-0.000001 rms=0.000133 Jy/beam
! Combined flux in latest and established models = 0.170817 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 525 components and 0.170817 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0710+4220_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 1.596 at 13.81 degrees (North through East)
! Clean map  min=-0.00068725  max=0.10065 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0710+4220_X_map.fits
wmodel /image_prod/ug002_uva//J0710+4220_X_map.mod
! Writing 525 model components to file: /image_prod/ug002_uva//J0710+4220_X_map.mod
wobs   /image_prod/ug002_uva//J0710+4220_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0710+4220_X_uvs.fits
wwins  /image_prod/ug002_uva//J0710+4220_X_map.win
! wwins: Wrote 9 windows to /image_prod/ug002_uva//J0710+4220_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.100645 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000132472 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.394868 0.394868 0.789737 1.57947 3.15895 6.3179 12.6358 25.2716 50.5432
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.1 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  759.746 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0710+4220_X_dfm.log closed on Wed Mar  4 21:41:17 2020