! Started logfile: /image_prod/ug002_uva//J0707+6110_X_dfm.log on Wed Mar 4 21:40:15 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0707+6110_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0707+6110_X_uva.fits ! AN table 1: 110 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.882222 visibilities/baseline/integration-bin. ! Found source: J0707+6110 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 52404 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0707+6110_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.024776Jy sigma=8.929278 ! Fit after self-cal, rms=0.812371Jy sigma=7.078190 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7537 mas, bmaj=0.9854 mas, bpa=16.38 degrees ! Estimated noise=0.877081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139648 Jy ! Component: 100 - total flux cleaned = 0.174414 Jy ! Total flux subtracted in 100 components = 0.174414 Jy ! Clean residual min=-0.007862 max=0.022359 Jy/beam ! Clean residual mean=-0.000006 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.174414 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.174414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086675Jy sigma=0.695500 ! Fit after self-cal, rms=0.086562Jy sigma=0.694276 ! Inverting map ! Added new window around map position (2.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218723 Jy ! Component: 100 - total flux cleaned = 0.0352039 Jy ! Total flux subtracted in 100 components = 0.0352039 Jy ! Clean residual min=-0.006096 max=0.012667 Jy/beam ! Clean residual mean=-0.000003 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.209618 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.209618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078397Jy sigma=0.615168 ! Fit after self-cal, rms=0.077956Jy sigma=0.611541 ! Inverting map ! Added new window around map position (1.2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125422 Jy ! Component: 100 - total flux cleaned = 0.0201288 Jy ! Total flux subtracted in 100 components = 0.0201288 Jy ! Clean residual min=-0.005522 max=0.009524 Jy/beam ! Clean residual mean=-0.000002 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.229746 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.229746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075034Jy sigma=0.584459 ! Fit after self-cal, rms=0.074742Jy sigma=0.582354 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679243 Jy ! Component: 100 - total flux cleaned = 0.0102226 Jy ! Total flux subtracted in 100 components = 0.0102226 Jy ! Clean residual min=-0.005228 max=0.006673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.239969 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 29 components and 0.239969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073869Jy sigma=0.575235 ! Fit after self-cal, rms=0.073791Jy sigma=0.574715 ! Inverting map ! Added new window around map position (4.4, -6.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054714 Jy ! Component: 100 - total flux cleaned = 0.00721323 Jy ! Total flux subtracted in 100 components = 0.00721323 Jy ! Clean residual min=-0.004866 max=0.005225 Jy/beam ! Clean residual mean=-0.000001 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.247182 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.247182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073257Jy sigma=0.569836 ! Fit after self-cal, rms=0.073222Jy sigma=0.569573 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.996 mas, bmaj=1.365 mas, bpa=20.58 degrees ! Estimated noise=0.364364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489743 Jy ! Component: 100 - total flux cleaned = 0.00790918 Jy ! Component: 150 - total flux cleaned = 0.00874282 Jy ! Component: 200 - total flux cleaned = 0.00920242 Jy ! Total flux subtracted in 200 components = 0.00920242 Jy ! Clean residual min=-0.005172 max=0.006776 Jy/beam ! Clean residual mean=-0.000005 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.256385 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 53 components and 0.256385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072825Jy sigma=0.565859 ! Fit after self-cal, rms=0.072769Jy sigma=0.565387 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.996 x 1.365 at 20.58 degrees (North through East) ! Clean map min=-0.0050032 max=0.18331 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.11 HN 0.93 KP 1.03 ! LA 1.02 MK 1.03 NL 1.09 OV 0.92 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.11 HN 0.94 KP 1.03 ! LA 1.03 MK 1.02 NL 1.08 OV 0.92 ! PT 0.90 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.12 HN 0.94 KP 1.03 ! LA 1.03 MK 1.03 NL 1.09 OV 0.92 ! PT 0.91 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 0.93 KP 1.02 ! LA 1.03 MK 1.02 NL 1.11 OV 0.92 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 0.94 KP 1.04 ! LA 1.03 MK 1.03 NL 1.10 OV 0.93 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 0.94 KP 1.02 ! LA 1.04 MK 1.03 NL 1.09 OV 0.92 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.11 HN 0.95 KP 1.03 ! LA 1.03 MK 1.04 NL 1.08 OV 0.92 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 0.94 KP 1.02 ! LA 1.03 MK 1.02 NL 1.09 OV 0.92 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.11 HN 0.95 KP 1.03 ! LA 1.03 MK 1.02 NL 1.10 OV 0.92 ! PT 0.92 SC 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.10 HN 0.94 KP 1.03 ! LA 1.03 MK 1.03 NL 1.08 OV 0.92 ! PT 0.91 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 0.95 KP 1.04 ! LA 1.03 MK 1.02 NL 1.10 OV 0.92 ! PT 0.91 SC 0.93 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 HN 0.97 KP 1.03 ! LA 1.04 MK 1.03 NL 1.09 OV 0.92 ! PT 0.92 SC 0.94 ! ! ! Fit before self-cal, rms=0.072769Jy sigma=0.565387 ! Fit after self-cal, rms=0.069821Jy sigma=0.544460 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9872 mas, bmaj=1.364 mas, bpa=20.99 degrees ! Estimated noise=0.362406 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109082 Jy ! Component: 100 - total flux cleaned = -0.00159046 Jy ! Component: 150 - total flux cleaned = -0.00196907 Jy ! Component: 200 - total flux cleaned = -0.00227501 Jy ! Total flux subtracted in 200 components = -0.00227501 Jy ! Clean residual min=-0.003170 max=0.003278 Jy/beam ! Clean residual mean=-0.000007 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.25411 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.25411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069618Jy sigma=0.542963 ! Fit after self-cal, rms=0.069583Jy sigma=0.542715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069583Jy sigma=0.542715 ! Fit after self-cal, rms=0.072346Jy sigma=0.526575 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9892 mas, bmaj=1.357 mas, bpa=22.54 degrees ! Estimated noise=0.363059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196006 Jy ! Component: 100 - total flux cleaned = -0.00044325 Jy ! Component: 150 - total flux cleaned = -0.000732048 Jy ! Component: 200 - total flux cleaned = -0.000931662 Jy ! Total flux subtracted in 200 components = -0.000931662 Jy ! Clean residual min=-0.001456 max=0.001713 Jy/beam ! Clean residual mean=-0.000003 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.253178 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.253178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072223Jy sigma=0.525640 ! Fit after self-cal, rms=0.072258Jy sigma=0.525508 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.4, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137693 Jy ! Component: 100 - total flux cleaned = 0.00183393 Jy ! Component: 150 - total flux cleaned = 0.00200436 Jy ! Component: 200 - total flux cleaned = 0.0020984 Jy ! Total flux subtracted in 200 components = 0.0020984 Jy ! Clean residual min=-0.001378 max=0.001508 Jy/beam ! Clean residual mean=-0.000002 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.255276 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 89 components and 0.255276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072203Jy sigma=0.525090 ! Fit after self-cal, rms=0.072200Jy sigma=0.525076 ! Inverting map ! Added new window around map position (21.8, 34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000981231 Jy ! Component: 100 - total flux cleaned = 0.0012327 Jy ! Component: 150 - total flux cleaned = 0.00145402 Jy ! Component: 200 - total flux cleaned = 0.00154104 Jy ! Total flux subtracted in 200 components = 0.00154104 Jy ! Clean residual min=-0.001300 max=0.001433 Jy/beam ! Clean residual mean=-0.000001 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.256817 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 104 components and 0.256817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072158Jy sigma=0.524736 ! Fit after self-cal, rms=0.072158Jy sigma=0.524723 ! Inverting map ! Added new window around map position (-24.8, -51). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000632701 Jy ! Component: 100 - total flux cleaned = 0.000560668 Jy ! Component: 150 - total flux cleaned = 0.000557288 Jy ! Component: 200 - total flux cleaned = 0.000670661 Jy ! Total flux subtracted in 200 components = 0.000670661 Jy ! Clean residual min=-0.001377 max=0.001426 Jy/beam ! Clean residual mean=-0.000001 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.257488 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 114 components and 0.257488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072115Jy sigma=0.524403 ! Fit after self-cal, rms=0.072112Jy sigma=0.524380 ! Inverting map ! Added new window around map position (51, 41.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110147 Jy ! Component: 100 - total flux cleaned = 0.0010677 Jy ! Component: 150 - total flux cleaned = 0.00106705 Jy ! Component: 200 - total flux cleaned = 0.00112045 Jy ! Total flux subtracted in 200 components = 0.00112045 Jy ! Clean residual min=-0.001324 max=0.001303 Jy/beam ! Clean residual mean=-0.000002 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.258608 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 125 components and 0.258608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072076Jy sigma=0.524105 ! Fit after self-cal, rms=0.072074Jy sigma=0.524084 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072074Jy sigma=0.524084 ! Fit after self-cal, rms=0.072246Jy sigma=0.523907 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9882 mas, bmaj=1.355 mas, bpa=22.67 degrees ! Estimated noise=0.362681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.75654e-05 Jy ! Component: 100 - total flux cleaned = -7.84578e-05 Jy ! Component: 150 - total flux cleaned = 7.68289e-06 Jy ! Component: 200 - total flux cleaned = 9.06286e-05 Jy ! Total flux subtracted in 200 components = 9.06286e-05 Jy ! Clean residual min=-0.001302 max=0.001269 Jy/beam ! Clean residual mean=-0.000002 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.258699 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 134 components and 0.258699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072216Jy sigma=0.523726 ! Fit after self-cal, rms=0.072218Jy sigma=0.523719 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.15097e-05 Jy ! Component: 100 - total flux cleaned = 0.000159947 Jy ! Component: 150 - total flux cleaned = 0.000185396 Jy ! Component: 200 - total flux cleaned = 0.000258976 Jy ! Total flux subtracted in 200 components = 0.000258976 Jy ! Clean residual min=-0.001305 max=0.001260 Jy/beam ! Clean residual mean=-0.000002 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.258958 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 140 components and 0.258958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072197Jy sigma=0.523596 ! Fit after self-cal, rms=0.072197Jy sigma=0.523592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072197Jy sigma=0.523592 ! Fit after self-cal, rms=0.072240Jy sigma=0.523576 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.361 mas, bmaj=2.723 mas, bpa=54.19 degrees ! Estimated noise=0.448539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671727 Jy ! Component: 100 - total flux cleaned = 0.000933306 Jy ! Component: 150 - total flux cleaned = 0.00104259 Jy ! Component: 200 - total flux cleaned = 0.00118026 Jy ! Total flux subtracted in 200 components = 0.00118026 Jy ! Clean residual min=-0.001178 max=0.001288 Jy/beam ! Clean residual mean=-0.000003 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.260138 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 152 components and 0.260138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072232Jy sigma=0.523515 ! Fit after self-cal, rms=0.072231Jy sigma=0.523493 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197662 Jy ! Component: 100 - total flux cleaned = 0.000262408 Jy ! Component: 150 - total flux cleaned = 0.00026307 Jy ! Component: 200 - total flux cleaned = 0.000263943 Jy ! Total flux subtracted in 200 components = 0.000263943 Jy ! Clean residual min=-0.001151 max=0.001196 Jy/beam ! Clean residual mean=-0.000003 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.260402 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 156 components and 0.260402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072229Jy sigma=0.523490 ! Fit after self-cal, rms=0.072228Jy sigma=0.523483 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9879 mas, bmaj=1.354 mas, bpa=22.7 degrees ! Estimated noise=0.362587 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9879 x 1.354 at 22.7 degrees (North through East) ! Clean map min=-0.0011258 max=0.18246 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.75 mas, bmaj=0.9786 mas, bpa=19.98 degrees ! Estimated noise=0.865842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13749 Jy ! Component: 100 - total flux cleaned = 0.175219 Jy ! Component: 150 - total flux cleaned = 0.197559 Jy ! Component: 200 - total flux cleaned = 0.212115 Jy ! Total flux subtracted in 200 components = 0.212115 Jy ! Clean residual min=-0.003132 max=0.007990 Jy/beam ! Clean residual mean=-0.000004 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.212115 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.212115 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9879 mas, bmaj=1.354 mas, bpa=22.7 degrees ! Estimated noise=0.362587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016528 Jy ! Component: 100 - total flux cleaned = 0.0256502 Jy ! Component: 150 - total flux cleaned = 0.0311637 Jy ! Component: 200 - total flux cleaned = 0.0346475 Jy ! Total flux subtracted in 200 components = 0.0346475 Jy ! Clean residual min=-0.001563 max=0.002107 Jy/beam ! Clean residual mean=-0.000003 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.246762 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 0.246762 Jy ! Inverting map ! Added new window around map position (3.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257417 Jy ! Component: 100 - total flux cleaned = 0.00467828 Jy ! Component: 150 - total flux cleaned = 0.00627016 Jy ! Component: 200 - total flux cleaned = 0.0075481 Jy ! Total flux subtracted in 200 components = 0.0075481 Jy ! Clean residual min=-0.001338 max=0.001623 Jy/beam ! Clean residual mean=-0.000002 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.25431 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 72 components and 0.25431 Jy ! Inverting map ! Added new window around map position (-12.6, -34.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127203 Jy ! Component: 100 - total flux cleaned = 0.00197467 Jy ! Component: 150 - total flux cleaned = 0.00247766 Jy ! Component: 200 - total flux cleaned = 0.00299427 Jy ! Total flux subtracted in 200 components = 0.00299427 Jy ! Clean residual min=-0.001283 max=0.001328 Jy/beam ! Clean residual mean=-0.000002 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.257305 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 97 components and 0.257305 Jy ! Inverting map ! Added new window around map position (15.4, 35.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00084555 Jy ! Component: 100 - total flux cleaned = 0.00122666 Jy ! Component: 150 - total flux cleaned = 0.00142796 Jy ! Component: 200 - total flux cleaned = 0.00169482 Jy ! Total flux subtracted in 200 components = 0.00169482 Jy ! Clean residual min=-0.001288 max=0.001329 Jy/beam ! Clean residual mean=-0.000002 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.258999 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 114 components and 0.258999 Jy ! Inverting map ! Added new window around map position (-28.6, -42.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000868532 Jy ! Component: 100 - total flux cleaned = 0.000866523 Jy ! Component: 150 - total flux cleaned = 0.000973244 Jy ! Component: 200 - total flux cleaned = 0.00107568 Jy ! Total flux subtracted in 200 components = 0.00107568 Jy ! Clean residual min=-0.001250 max=0.001296 Jy/beam ! Clean residual mean=-0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.260075 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 134 components and 0.260075 Jy ! Inverting map ! Added new window around map position (24.6, 38.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000875235 Jy ! Component: 100 - total flux cleaned = 0.00112525 Jy ! Component: 150 - total flux cleaned = 0.00142289 Jy ! Component: 200 - total flux cleaned = 0.00161209 Jy ! Total flux subtracted in 200 components = 0.00161209 Jy ! Clean residual min=-0.001264 max=0.001113 Jy/beam ! Clean residual mean=-0.000001 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.261687 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 147 components and 0.261687 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.361 mas, bmaj=2.723 mas, bpa=54.19 degrees ! Estimated noise=0.448539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464383 Jy ! Component: 100 - total flux cleaned = 0.00085288 Jy ! Component: 150 - total flux cleaned = 0.00123473 Jy ! Component: 200 - total flux cleaned = 0.00159109 Jy ! Total flux subtracted in 200 components = 0.00159109 Jy ! Clean residual min=-0.001495 max=0.001124 Jy/beam ! Clean residual mean=-0.000001 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.263278 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252899 Jy ! Component: 100 - total flux cleaned = 0.000463437 Jy ! Component: 150 - total flux cleaned = 0.000639972 Jy ! Component: 200 - total flux cleaned = 0.000771214 Jy ! Total flux subtracted in 200 components = 0.000771214 Jy ! Clean residual min=-0.001526 max=0.001100 Jy/beam ! Clean residual mean=-0.000001 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.264049 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 183 components and 0.264049 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9879 mas, bmaj=1.354 mas, bpa=22.7 degrees ! Estimated noise=0.362587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.67788e-05 Jy ! Component: 100 - total flux cleaned = -6.80712e-05 Jy ! Component: 150 - total flux cleaned = -4.03862e-05 Jy ! Component: 200 - total flux cleaned = -1.45072e-05 Jy ! Total flux subtracted in 200 components = -1.45072e-05 Jy ! Clean residual min=-0.001239 max=0.001150 Jy/beam ! Clean residual mean=-0.000000 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.264035 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 196 components and 0.264035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072099Jy sigma=0.522705 ! Fit after self-cal, rms=0.072082Jy sigma=0.522584 wmodel J0707+6110_X_map.mod ! Writing 196 model components to file: J0707+6110_X_map.mod wobs J0707+6110_X_uvs.fits ! Writing UV FITS file: J0707+6110_X_uvs.fits wwins J0707+6110_X_map.win ! wwins: Wrote 13 windows to J0707+6110_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000386347 Jy ! Component: 100 - total flux cleaned = -0.000701309 Jy ! Component: 150 - total flux cleaned = -0.000962927 Jy ! Component: 200 - total flux cleaned = -0.00123543 Jy ! Component: 250 - total flux cleaned = -0.00150085 Jy ! Component: 300 - total flux cleaned = -0.00179665 Jy ! Component: 350 - total flux cleaned = -0.00203226 Jy ! Component: 400 - total flux cleaned = -0.00222837 Jy ! Component: 450 - total flux cleaned = -0.00243901 Jy ! Component: 500 - total flux cleaned = -0.00266367 Jy ! Component: 550 - total flux cleaned = -0.00286817 Jy ! Component: 600 - total flux cleaned = -0.00305311 Jy ! Component: 650 - total flux cleaned = -0.00316956 Jy ! Component: 700 - total flux cleaned = -0.00331774 Jy ! Component: 750 - total flux cleaned = -0.00341553 Jy ! Component: 800 - total flux cleaned = -0.00351214 Jy ! Component: 850 - total flux cleaned = -0.00360797 Jy ! Component: 900 - total flux cleaned = -0.00363976 Jy ! Component: 950 - total flux cleaned = -0.00368702 Jy ! Component: 1000 - total flux cleaned = -0.00381163 Jy ! Component: 1050 - total flux cleaned = -0.00379604 Jy ! Component: 1100 - total flux cleaned = -0.00382696 Jy ! Component: 1150 - total flux cleaned = -0.00382686 Jy ! Component: 1200 - total flux cleaned = -0.00390265 Jy ! Component: 1250 - total flux cleaned = -0.00390266 Jy ! Component: 1300 - total flux cleaned = -0.00399234 Jy ! Component: 1350 - total flux cleaned = -0.00400722 Jy ! Component: 1400 - total flux cleaned = -0.00408103 Jy ! Component: 1450 - total flux cleaned = -0.00402225 Jy ! Component: 1500 - total flux cleaned = -0.00415371 Jy ! Component: 1550 - total flux cleaned = -0.00418277 Jy ! Component: 1600 - total flux cleaned = -0.00419724 Jy ! Component: 1650 - total flux cleaned = -0.00425457 Jy ! Component: 1700 - total flux cleaned = -0.00422597 Jy ! Component: 1750 - total flux cleaned = -0.00431122 Jy ! Component: 1800 - total flux cleaned = -0.00425472 Jy ! Component: 1850 - total flux cleaned = -0.00433915 Jy ! Component: 1900 - total flux cleaned = -0.00432515 Jy ! Component: 1950 - total flux cleaned = -0.00435309 Jy ! Component: 2000 - total flux cleaned = -0.00445003 Jy ! Component: 2050 - total flux cleaned = -0.00439477 Jy ! Component: 2100 - total flux cleaned = -0.00449088 Jy ! Component: 2150 - total flux cleaned = -0.00449084 Jy ! Component: 2200 - total flux cleaned = -0.00454522 Jy ! Component: 2250 - total flux cleaned = -0.0045452 Jy ! Component: 2300 - total flux cleaned = -0.00454521 Jy ! Component: 2350 - total flux cleaned = -0.00462581 Jy ! Component: 2400 - total flux cleaned = -0.0046793 Jy ! Component: 2450 - total flux cleaned = -0.00470584 Jy ! Component: 2500 - total flux cleaned = -0.00475897 Jy ! Component: 2550 - total flux cleaned = -0.00475889 Jy ! Component: 2600 - total flux cleaned = -0.00485104 Jy ! Component: 2650 - total flux cleaned = -0.00485102 Jy ! Component: 2700 - total flux cleaned = -0.00487723 Jy ! Component: 2750 - total flux cleaned = -0.00494217 Jy ! Component: 2800 - total flux cleaned = -0.00501989 Jy ! Component: 2850 - total flux cleaned = -0.00507153 Jy ! Component: 2900 - total flux cleaned = -0.0050587 Jy ! Component: 2950 - total flux cleaned = -0.00512263 Jy ! Component: 3000 - total flux cleaned = -0.00514816 Jy ! Component: 3050 - total flux cleaned = -0.00513547 Jy ! Component: 3100 - total flux cleaned = -0.0051608 Jy ! Component: 3150 - total flux cleaned = -0.00521133 Jy ! Component: 3200 - total flux cleaned = -0.00523656 Jy ! Component: 3250 - total flux cleaned = -0.00527417 Jy ! Component: 3300 - total flux cleaned = -0.00533663 Jy ! Component: 3350 - total flux cleaned = -0.00533659 Jy ! Component: 3400 - total flux cleaned = -0.00532418 Jy ! Component: 3450 - total flux cleaned = -0.00537367 Jy ! Component: 3500 - total flux cleaned = -0.00539825 Jy ! Component: 3550 - total flux cleaned = -0.00542277 Jy ! Component: 3600 - total flux cleaned = -0.00543504 Jy ! Component: 3650 - total flux cleaned = -0.00538628 Jy ! Component: 3700 - total flux cleaned = -0.00548351 Jy ! Component: 3750 - total flux cleaned = -0.00549559 Jy ! Component: 3800 - total flux cleaned = -0.00553173 Jy ! Component: 3850 - total flux cleaned = -0.00555581 Jy ! Component: 3900 - total flux cleaned = -0.0055798 Jy ! Component: 3950 - total flux cleaned = -0.00554392 Jy ! Component: 4000 - total flux cleaned = -0.00555579 Jy ! Component: 4050 - total flux cleaned = -0.00556769 Jy ! Total flux subtracted in 4096 components = -0.00561509 Jy ! Clean residual min=-0.000739 max=0.000788 Jy/beam ! Clean residual mean=0.000001 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.25842 Jy keep ! Adding 344 model components to the UV plane model. ! The established model now contains 540 components and 0.25842 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0707+6110_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9879 x 1.354 at 22.7 degrees (North through East) ! Clean map min=-0.001186 max=0.18259 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0707+6110_X_map.fits wmodel /image_prod/ug002_uva//J0707+6110_X_map.mod ! Writing 540 model components to file: /image_prod/ug002_uva//J0707+6110_X_map.mod wobs /image_prod/ug002_uva//J0707+6110_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0707+6110_X_uvs.fits wwins /image_prod/ug002_uva//J0707+6110_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J0707+6110_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.182591 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000208215 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.3421 0.3421 0.684201 1.3684 2.7368 5.47361 10.9472 21.8944 43.7889 87.5777 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.182 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 876.935 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0707+6110_X_dfm.log closed on Wed Mar 4 21:40:23 2020