! Started logfile: /image_prod/ug002_uva//J0702+8549_X_dfm.log on Wed Mar 4 21:37:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0702+8549_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0702+8549_X_uva.fits ! AN table 1: 80 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.835 visibilities/baseline/integration-bin. ! Found source: J0702+8549 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 36072 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0702+8549_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009501Jy sigma=8.634812 ! Fit after self-cal, rms=0.906421Jy sigma=7.749854 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7926 mas, bmaj=0.8466 mas, bpa=-67.7 degrees ! Estimated noise=0.914183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0652881 Jy ! Component: 100 - total flux cleaned = 0.0908457 Jy ! Total flux subtracted in 100 components = 0.0908457 Jy ! Clean residual min=-0.006011 max=0.028356 Jy/beam ! Clean residual mean=-0.000008 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.0908457 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0908457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078804Jy sigma=0.648592 ! Fit after self-cal, rms=0.078129Jy sigma=0.643056 ! Inverting map ! Added new window around map position (-1.4, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267272 Jy ! Component: 100 - total flux cleaned = 0.0404441 Jy ! Total flux subtracted in 100 components = 0.0404441 Jy ! Clean residual min=-0.004128 max=0.009778 Jy/beam ! Clean residual mean=-0.000005 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.13129 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 0.13129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065586Jy sigma=0.533328 ! Fit after self-cal, rms=0.064151Jy sigma=0.521166 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124534 Jy ! Component: 100 - total flux cleaned = 0.0199342 Jy ! Total flux subtracted in 100 components = 0.0199342 Jy ! Clean residual min=-0.003127 max=0.004478 Jy/beam ! Clean residual mean=-0.000004 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.151224 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.151224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060479Jy sigma=0.489785 ! Fit after self-cal, rms=0.060251Jy sigma=0.487897 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624901 Jy ! Component: 100 - total flux cleaned = 0.010338 Jy ! Total flux subtracted in 100 components = 0.010338 Jy ! Clean residual min=-0.002684 max=0.002782 Jy/beam ! Clean residual mean=-0.000003 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.161562 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.161562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059175Jy sigma=0.479226 ! Fit after self-cal, rms=0.059125Jy sigma=0.478817 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.063 mas, bmaj=1.111 mas, bpa=-76.38 degrees ! Estimated noise=0.4414 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509943 Jy ! Component: 100 - total flux cleaned = 0.00802469 Jy ! Component: 150 - total flux cleaned = 0.00991716 Jy ! Component: 200 - total flux cleaned = 0.0111755 Jy ! Total flux subtracted in 200 components = 0.0111755 Jy ! Clean residual min=-0.002354 max=0.003817 Jy/beam ! Clean residual mean=-0.000003 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.172737 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.172737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058604Jy sigma=0.475249 ! Fit after self-cal, rms=0.058571Jy sigma=0.474962 ! Inverting map ! Added new window around map position (-4.2, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367105 Jy ! Component: 100 - total flux cleaned = 0.00573317 Jy ! Component: 150 - total flux cleaned = 0.00719528 Jy ! Component: 200 - total flux cleaned = 0.00824956 Jy ! Total flux subtracted in 200 components = 0.00824956 Jy ! Clean residual min=-0.002159 max=0.002265 Jy/beam ! Clean residual mean=-0.000002 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.180987 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 64 components and 0.180987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058315Jy sigma=0.472833 ! Fit after self-cal, rms=0.058278Jy sigma=0.472486 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.063 x 1.111 at -76.38 degrees (North through East) ! Clean map min=-0.0020755 max=0.084929 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.98 KP 1.05 ! LA 1.04 MK 1.03 NL 1.10 OV 1.05 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.99 HN 0.98 KP 1.04 ! LA 1.02 MK 0.97 NL 1.12 OV 1.04 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.00 KP 1.05 ! LA 0.98 MK 1.01 NL 1.11 OV 1.02 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.02 KP 1.01 ! LA 1.04 MK 1.04 NL 1.08 OV 1.03 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 0.98 KP 1.04 ! LA 1.00 MK 0.98 NL 1.13 OV 1.04 ! PT 0.90 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.93 KP 1.02 ! LA 1.00 MK 1.04 NL 1.14 OV 1.04 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 0.96 KP 1.03 ! LA 0.99 MK 1.05 NL 1.14 OV 1.02 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.94 KP 1.07 ! LA 1.02 MK 0.95 NL 1.10 OV 1.05 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.01 KP 1.02 ! LA 1.02 MK 1.02 NL 1.12 OV 1.02 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.01 KP 1.03 ! LA 0.99 MK 1.01 NL 1.16 OV 1.08 ! PT 0.88 SC 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.94 KP 1.05 ! LA 1.03 MK 0.98 NL 1.11 OV 1.00 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.98 HN 1.01 KP 1.07 ! LA 0.99 MK 0.98 NL 1.14 OV 1.06 ! PT 0.90 SC 0.92 ! ! ! Fit before self-cal, rms=0.058278Jy sigma=0.472486 ! Fit after self-cal, rms=0.056418Jy sigma=0.465389 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.062 mas, bmaj=1.111 mas, bpa=-75.52 degrees ! Estimated noise=0.443117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.4, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135788 Jy ! Component: 100 - total flux cleaned = 0.00187602 Jy ! Component: 150 - total flux cleaned = 0.00201606 Jy ! Component: 200 - total flux cleaned = 0.00209047 Jy ! Total flux subtracted in 200 components = 0.00209047 Jy ! Clean residual min=-0.000924 max=0.000986 Jy/beam ! Clean residual mean=0.000001 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.183077 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 89 components and 0.183077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056376Jy sigma=0.465044 ! Fit after self-cal, rms=0.056358Jy sigma=0.464909 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056358Jy sigma=0.464909 ! Fit after self-cal, rms=0.056362Jy sigma=0.463789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.112 mas, bpa=-75.89 degrees ! Estimated noise=0.443249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450274 Jy ! Component: 100 - total flux cleaned = 0.000610641 Jy ! Component: 150 - total flux cleaned = 0.000707111 Jy ! Component: 200 - total flux cleaned = 0.000724788 Jy ! Total flux subtracted in 200 components = 0.000724788 Jy ! Clean residual min=-0.000821 max=0.000873 Jy/beam ! Clean residual mean=0.000001 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.183802 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 0.183802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056347Jy sigma=0.463664 ! Fit after self-cal, rms=0.056351Jy sigma=0.463631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.6, -27.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612278 Jy ! Component: 100 - total flux cleaned = 0.000855509 Jy ! Component: 150 - total flux cleaned = 0.000924224 Jy ! Component: 200 - total flux cleaned = 0.00095575 Jy ! Total flux subtracted in 200 components = 0.00095575 Jy ! Clean residual min=-0.000832 max=0.000888 Jy/beam ! Clean residual mean=0.000001 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.184758 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 100 components and 0.184758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056336Jy sigma=0.463508 ! Fit after self-cal, rms=0.056334Jy sigma=0.463497 ! Inverting map ! Added new window around map position (48.6, 35.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418452 Jy ! Component: 100 - total flux cleaned = 0.000394596 Jy ! Component: 150 - total flux cleaned = 0.000539745 Jy ! Component: 200 - total flux cleaned = 0.000749845 Jy ! Total flux subtracted in 200 components = 0.000749845 Jy ! Clean residual min=-0.000804 max=0.000859 Jy/beam ! Clean residual mean=0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.185508 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 114 components and 0.185508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056317Jy sigma=0.463359 ! Fit after self-cal, rms=0.056316Jy sigma=0.463348 ! Inverting map ! Added new window around map position (27.2, 24.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000684804 Jy ! Component: 100 - total flux cleaned = 0.000722506 Jy ! Component: 150 - total flux cleaned = 0.000791853 Jy ! Component: 200 - total flux cleaned = 0.000887706 Jy ! Total flux subtracted in 200 components = 0.000887706 Jy ! Clean residual min=-0.000748 max=0.000827 Jy/beam ! Clean residual mean=0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.186396 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 126 components and 0.186396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056301Jy sigma=0.463226 ! Fit after self-cal, rms=0.056300Jy sigma=0.463220 ! Inverting map ! Added new window around map position (-28.4, -41.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410476 Jy ! Component: 100 - total flux cleaned = 0.000445931 Jy ! Component: 150 - total flux cleaned = 0.000543431 Jy ! Component: 200 - total flux cleaned = 0.000573864 Jy ! Total flux subtracted in 200 components = 0.000573864 Jy ! Clean residual min=-0.000729 max=0.000810 Jy/beam ! Clean residual mean=0.000001 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.186969 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 138 components and 0.186969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056287Jy sigma=0.463109 ! Fit after self-cal, rms=0.056286Jy sigma=0.463101 ! Inverting map ! Added new window around map position (-1.4, -16.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515 Jy ! Component: 100 - total flux cleaned = 0.000534598 Jy ! Component: 150 - total flux cleaned = 0.000503805 Jy ! Component: 200 - total flux cleaned = 0.000475335 Jy ! Total flux subtracted in 200 components = 0.000475335 Jy ! Clean residual min=-0.000713 max=0.000735 Jy/beam ! Clean residual mean=0.000001 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.187445 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 150 components and 0.187445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056274Jy sigma=0.463006 ! Fit after self-cal, rms=0.056273Jy sigma=0.463001 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056273Jy sigma=0.463001 ! Fit after self-cal, rms=0.056127Jy sigma=0.462967 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=1.11 mas, bpa=-75.8 degrees ! Estimated noise=0.442344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394885 Jy ! Component: 100 - total flux cleaned = 0.000612696 Jy ! Component: 150 - total flux cleaned = 0.000699868 Jy ! Component: 200 - total flux cleaned = 0.000727681 Jy ! Total flux subtracted in 200 components = 0.000727681 Jy ! Clean residual min=-0.000709 max=0.000726 Jy/beam ! Clean residual mean=0.000000 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.188173 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 157 components and 0.188173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056119Jy sigma=0.462908 ! Fit after self-cal, rms=0.056119Jy sigma=0.462905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124547 Jy ! Component: 100 - total flux cleaned = 0.000150932 Jy ! Component: 150 - total flux cleaned = 0.000189386 Jy ! Component: 200 - total flux cleaned = 0.000214028 Jy ! Total flux subtracted in 200 components = 0.000214028 Jy ! Clean residual min=-0.000704 max=0.000723 Jy/beam ! Clean residual mean=0.000000 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.188387 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 159 components and 0.188387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056113Jy sigma=0.462864 ! Fit after self-cal, rms=0.056113Jy sigma=0.462863 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056113Jy sigma=0.462863 ! Fit after self-cal, rms=0.056080Jy sigma=0.462861 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.46 mas, bmaj=2.503 mas, bpa=54.32 degrees ! Estimated noise=0.577864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396444 Jy ! Component: 100 - total flux cleaned = 0.000595692 Jy ! Component: 150 - total flux cleaned = 0.00067863 Jy ! Component: 200 - total flux cleaned = 0.000735555 Jy ! Total flux subtracted in 200 components = 0.000735555 Jy ! Clean residual min=-0.000741 max=0.000666 Jy/beam ! Clean residual mean=0.000001 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.189122 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 172 components and 0.189122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056078Jy sigma=0.462846 ! Fit after self-cal, rms=0.056078Jy sigma=0.462844 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.82508e-05 Jy ! Component: 100 - total flux cleaned = 0.00010592 Jy ! Component: 150 - total flux cleaned = 0.000106154 Jy ! Component: 200 - total flux cleaned = 9.93349e-05 Jy ! Total flux subtracted in 200 components = 9.93349e-05 Jy ! Clean residual min=-0.000724 max=0.000645 Jy/beam ! Clean residual mean=0.000001 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.189221 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 178 components and 0.189221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056076Jy sigma=0.462832 ! Fit after self-cal, rms=0.056076Jy sigma=0.462832 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=1.11 mas, bpa=-75.89 degrees ! Estimated noise=0.442132 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.06 x 1.11 at -75.89 degrees (North through East) ! Clean map min=-0.00068607 max=0.08496 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.791 mas, bmaj=0.8475 mas, bpa=-67.6 degrees ! Estimated noise=0.912227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670153 Jy ! Component: 100 - total flux cleaned = 0.102389 Jy ! Component: 150 - total flux cleaned = 0.123788 Jy ! Component: 200 - total flux cleaned = 0.137742 Jy ! Total flux subtracted in 200 components = 0.137742 Jy ! Clean residual min=-0.003013 max=0.007652 Jy/beam ! Clean residual mean=-0.000004 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.137742 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.137742 Jy ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=1.11 mas, bpa=-75.89 degrees ! Estimated noise=0.442132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014814 Jy ! Component: 100 - total flux cleaned = 0.0232217 Jy ! Component: 150 - total flux cleaned = 0.028516 Jy ! Component: 200 - total flux cleaned = 0.0322772 Jy ! Total flux subtracted in 200 components = 0.0322772 Jy ! Clean residual min=-0.001218 max=0.002312 Jy/beam ! Clean residual mean=-0.000002 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.17002 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 45 components and 0.17002 Jy ! Inverting map ! Added new window around map position (-0.2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287575 Jy ! Component: 100 - total flux cleaned = 0.00509973 Jy ! Component: 150 - total flux cleaned = 0.00685102 Jy ! Component: 200 - total flux cleaned = 0.00832558 Jy ! Total flux subtracted in 200 components = 0.00832558 Jy ! Clean residual min=-0.000941 max=0.001120 Jy/beam ! Clean residual mean=-0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.178345 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 80 components and 0.178345 Jy ! Inverting map ! Added new window around map position (-2.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132105 Jy ! Component: 100 - total flux cleaned = 0.0024616 Jy ! Component: 150 - total flux cleaned = 0.00347848 Jy ! Component: 200 - total flux cleaned = 0.00439504 Jy ! Total flux subtracted in 200 components = 0.00439504 Jy ! Clean residual min=-0.000858 max=0.000851 Jy/beam ! Clean residual mean=-0.000000 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.18274 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 103 components and 0.18274 Jy ! Inverting map ! Added new window around map position (6.4, -36). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801967 Jy ! Component: 100 - total flux cleaned = 0.00148736 Jy ! Component: 150 - total flux cleaned = 0.00203329 Jy ! Component: 200 - total flux cleaned = 0.00248766 Jy ! Total flux subtracted in 200 components = 0.00248766 Jy ! Clean residual min=-0.000807 max=0.000744 Jy/beam ! Clean residual mean=-0.000000 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.185228 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 121 components and 0.185228 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.46 mas, bmaj=2.503 mas, bpa=54.32 degrees ! Estimated noise=0.577864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105803 Jy ! Component: 100 - total flux cleaned = 0.00175132 Jy ! Component: 150 - total flux cleaned = 0.00228935 Jy ! Component: 200 - total flux cleaned = 0.00266524 Jy ! Total flux subtracted in 200 components = 0.00266524 Jy ! Clean residual min=-0.000848 max=0.000680 Jy/beam ! Clean residual mean=0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.187893 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263168 Jy ! Component: 100 - total flux cleaned = 0.000483809 Jy ! Component: 150 - total flux cleaned = 0.00062193 Jy ! Component: 200 - total flux cleaned = 0.000703354 Jy ! Total flux subtracted in 200 components = 0.000703354 Jy ! Clean residual min=-0.000812 max=0.000675 Jy/beam ! Clean residual mean=0.000001 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.188597 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 182 components and 0.188597 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=1.11 mas, bpa=-75.89 degrees ! Estimated noise=0.442132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111617 Jy ! Component: 100 - total flux cleaned = -5.25626e-05 Jy ! Component: 150 - total flux cleaned = -1.56897e-05 Jy ! Component: 200 - total flux cleaned = -1.51188e-05 Jy ! Total flux subtracted in 200 components = -1.51188e-05 Jy ! Clean residual min=-0.000725 max=0.000706 Jy/beam ! Clean residual mean=0.000000 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.188581 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 202 components and 0.188581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056075Jy sigma=0.462835 ! Fit after self-cal, rms=0.056069Jy sigma=0.462787 wmodel J0702+8549_X_map.mod ! Writing 202 model components to file: J0702+8549_X_map.mod wobs J0702+8549_X_uvs.fits ! Writing UV FITS file: J0702+8549_X_uvs.fits wwins J0702+8549_X_map.win ! wwins: Wrote 12 windows to J0702+8549_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143656 Jy ! Component: 100 - total flux cleaned = 0.000156449 Jy ! Component: 150 - total flux cleaned = 0.000132744 Jy ! Component: 200 - total flux cleaned = 0.000167551 Jy ! Component: 250 - total flux cleaned = 0.000201704 Jy ! Component: 300 - total flux cleaned = 0.000212876 Jy ! Component: 350 - total flux cleaned = 0.000245985 Jy ! Component: 400 - total flux cleaned = 0.000245926 Jy ! Component: 450 - total flux cleaned = 0.000235215 Jy ! Component: 500 - total flux cleaned = 0.000267197 Jy ! Component: 550 - total flux cleaned = 0.000277483 Jy ! Component: 600 - total flux cleaned = 0.000256557 Jy ! Component: 650 - total flux cleaned = 0.000287388 Jy ! Component: 700 - total flux cleaned = 0.000266882 Jy ! Component: 750 - total flux cleaned = 0.000266786 Jy ! Component: 800 - total flux cleaned = 0.000266899 Jy ! Component: 850 - total flux cleaned = 0.000237035 Jy ! Component: 900 - total flux cleaned = 0.000187949 Jy ! Component: 950 - total flux cleaned = 0.000178167 Jy ! Component: 1000 - total flux cleaned = 0.000139369 Jy ! Component: 1050 - total flux cleaned = 0.000110609 Jy ! Component: 1100 - total flux cleaned = 6.30416e-05 Jy ! Component: 1150 - total flux cleaned = 4.42788e-05 Jy ! Component: 1200 - total flux cleaned = 3.49556e-05 Jy ! Component: 1250 - total flux cleaned = -1.14831e-05 Jy ! Component: 1300 - total flux cleaned = -7.59638e-05 Jy ! Component: 1350 - total flux cleaned = -0.000103283 Jy ! Component: 1400 - total flux cleaned = -8.51294e-05 Jy ! Component: 1450 - total flux cleaned = -0.00012121 Jy ! Component: 1500 - total flux cleaned = -0.000139126 Jy ! Component: 1550 - total flux cleaned = -0.000201582 Jy ! Component: 1600 - total flux cleaned = -0.000183827 Jy ! Component: 1650 - total flux cleaned = -0.000183883 Jy ! Component: 1700 - total flux cleaned = -0.000280155 Jy ! Component: 1750 - total flux cleaned = -0.000236672 Jy ! Component: 1800 - total flux cleaned = -0.000254 Jy ! Component: 1850 - total flux cleaned = -0.000297035 Jy ! Component: 1900 - total flux cleaned = -0.000314297 Jy ! Component: 1950 - total flux cleaned = -0.000331312 Jy ! Component: 2000 - total flux cleaned = -0.000339763 Jy ! Component: 2050 - total flux cleaned = -0.000322921 Jy ! Component: 2100 - total flux cleaned = -0.000364821 Jy ! Component: 2150 - total flux cleaned = -0.000373177 Jy ! Component: 2200 - total flux cleaned = -0.000381468 Jy ! Component: 2250 - total flux cleaned = -0.00040614 Jy ! Component: 2300 - total flux cleaned = -0.000447125 Jy ! Component: 2350 - total flux cleaned = -0.00044712 Jy ! Component: 2400 - total flux cleaned = -0.000463442 Jy ! Component: 2450 - total flux cleaned = -0.000471478 Jy ! Component: 2500 - total flux cleaned = -0.000479514 Jy ! Component: 2550 - total flux cleaned = -0.000471512 Jy ! Component: 2600 - total flux cleaned = -0.000503368 Jy ! Component: 2650 - total flux cleaned = -0.000503392 Jy ! Component: 2700 - total flux cleaned = -0.000511314 Jy ! Component: 2750 - total flux cleaned = -0.000534839 Jy ! Component: 2800 - total flux cleaned = -0.00057391 Jy ! Component: 2850 - total flux cleaned = -0.000620477 Jy ! Component: 2900 - total flux cleaned = -0.000581733 Jy ! Component: 2950 - total flux cleaned = -0.000566304 Jy ! Component: 3000 - total flux cleaned = -0.000596981 Jy ! Component: 3050 - total flux cleaned = -0.000627534 Jy ! Component: 3100 - total flux cleaned = -0.000627478 Jy ! Component: 3150 - total flux cleaned = -0.000619903 Jy ! Component: 3200 - total flux cleaned = -0.000627434 Jy ! Component: 3250 - total flux cleaned = -0.00059743 Jy ! Component: 3300 - total flux cleaned = -0.000612412 Jy ! Component: 3350 - total flux cleaned = -0.000634745 Jy ! Component: 3400 - total flux cleaned = -0.000642093 Jy ! Component: 3450 - total flux cleaned = -0.000619984 Jy ! Component: 3500 - total flux cleaned = -0.000634674 Jy ! Component: 3550 - total flux cleaned = -0.000619994 Jy ! Component: 3600 - total flux cleaned = -0.000649144 Jy ! Component: 3650 - total flux cleaned = -0.000649094 Jy ! Component: 3700 - total flux cleaned = -0.000663534 Jy ! Component: 3750 - total flux cleaned = -0.000605915 Jy ! Component: 3800 - total flux cleaned = -0.000648945 Jy ! Component: 3850 - total flux cleaned = -0.000620368 Jy ! Component: 3900 - total flux cleaned = -0.000648842 Jy ! Component: 3950 - total flux cleaned = -0.000648879 Jy ! Component: 4000 - total flux cleaned = -0.000655948 Jy ! Component: 4050 - total flux cleaned = -0.000634839 Jy ! Total flux subtracted in 4096 components = -0.000648844 Jy ! Clean residual min=-0.000477 max=0.000377 Jy/beam ! Clean residual mean=0.000000 rms=0.000115 Jy/beam ! Combined flux in latest and established models = 0.187933 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 527 components and 0.187933 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0702+8549_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.06 x 1.11 at -75.89 degrees (North through East) ! Clean map min=-0.00055672 max=0.084572 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0702+8549_X_map.fits wmodel /image_prod/ug002_uva//J0702+8549_X_map.mod ! Writing 527 model components to file: /image_prod/ug002_uva//J0702+8549_X_map.mod wobs /image_prod/ug002_uva//J0702+8549_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0702+8549_X_uvs.fits wwins /image_prod/ug002_uva//J0702+8549_X_map.win ! wwins: Wrote 13 windows to /image_prod/ug002_uva//J0702+8549_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0845715 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000115312 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.409044 0.409044 0.818088 1.63618 3.27235 6.5447 13.0894 26.1788 52.3576 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.084 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 733.417 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0702+8549_X_dfm.log closed on Wed Mar 4 21:37:54 2020