! Started logfile: /image_prod/ug002_uva//J0650-1637_X_j_dfm.log on Wed Mar 4 21:32:44 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0650-1637_X_j_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0650-1637_X_j_uva.fits ! AN table 1: 12 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.866071 visibilities/baseline/integration-bin. ! Found source: J0650-1637 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 3492 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0650-1637_X_j] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.328631Jy sigma=8.022919 ! Fit after self-cal, rms=0.301328Jy sigma=1.847213 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6206 mas, bmaj=1.488 mas, bpa=-2.385 degrees ! Estimated noise=2.62825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.596212 Jy ! Component: 100 - total flux cleaned = 0.746846 Jy ! Total flux subtracted in 100 components = 0.746846 Jy ! Clean residual min=-0.044494 max=0.087921 Jy/beam ! Clean residual mean=0.000114 rms=0.011336 Jy/beam ! Combined flux in latest and established models = 0.746846 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.746846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.265036Jy sigma=1.531056 ! Fit after self-cal, rms=0.264750Jy sigma=1.530325 ! Inverting map ! Added new window around map position (-0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0944434 Jy ! Component: 100 - total flux cleaned = 0.160538 Jy ! Total flux subtracted in 100 components = 0.160538 Jy ! Clean residual min=-0.032481 max=0.050654 Jy/beam ! Clean residual mean=0.000074 rms=0.008074 Jy/beam ! Combined flux in latest and established models = 0.907384 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.907385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.193205Jy sigma=1.112763 ! Fit after self-cal, rms=0.191782Jy sigma=1.105363 ! Inverting map ! Added new window around map position (-1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562088 Jy ! Component: 100 - total flux cleaned = 0.0986058 Jy ! Total flux subtracted in 100 components = 0.0986058 Jy ! Clean residual min=-0.025356 max=0.028576 Jy/beam ! Clean residual mean=0.000051 rms=0.006331 Jy/beam ! Combined flux in latest and established models = 1.00599 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 28 components and 1.00599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156589Jy sigma=0.895852 ! Fit after self-cal, rms=0.155795Jy sigma=0.891023 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7253 mas, bmaj=1.688 mas, bpa=-2.411 degrees ! Estimated noise=1.99759 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0600122 Jy ! Component: 100 - total flux cleaned = 0.102409 Jy ! Component: 150 - total flux cleaned = 0.134077 Jy ! Component: 200 - total flux cleaned = 0.158171 Jy ! Total flux subtracted in 200 components = 0.158171 Jy ! Clean residual min=-0.024959 max=0.034766 Jy/beam ! Clean residual mean=0.000023 rms=0.007359 Jy/beam ! Combined flux in latest and established models = 1.16416 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 50 components and 1.16416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120131Jy sigma=0.674947 ! Fit after self-cal, rms=0.119017Jy sigma=0.666863 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7253 x 1.688 at -2.411 degrees (North through East) ! Clean map min=-0.023237 max=0.82779 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 1.08 KP 1.01 ! MK 1.06 NL 1.09 OV 0.87 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.10 KP 0.99 ! MK 1.02 NL 1.14 OV 0.89 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.10 KP 1.02 ! MK 1.03 NL 1.10 OV 0.88 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.10 KP 1.00 ! MK 1.05 NL 1.07 OV 0.90 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 1.06 KP 1.03 ! MK 1.02 NL 1.08 OV 0.91 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.10 KP 1.01 ! MK 0.99 NL 1.07 OV 0.88 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 1.10 KP 1.00 ! MK 1.01 NL 1.07 OV 0.91 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 1.09 KP 1.02 ! MK 0.98 NL 1.05 OV 0.90 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.08 KP 1.00 ! MK 1.00 NL 1.07 OV 0.88 SC 1.06 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 1.04 KP 0.99 ! MK 1.02 NL 1.12 OV 0.89 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.07 KP 1.00 ! MK 1.03 NL 1.08 OV 0.88 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.93 HN 1.12 KP 0.96 ! MK 1.09 NL 1.09 OV 0.91 SC 0.99 ! ! ! Fit before self-cal, rms=0.119017Jy sigma=0.666863 ! Fit after self-cal, rms=0.082555Jy sigma=0.454567 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7355 mas, bmaj=1.7 mas, bpa=-1.956 degrees ! Estimated noise=1.99062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103751 Jy ! Component: 100 - total flux cleaned = -0.00158427 Jy ! Component: 150 - total flux cleaned = -0.00205732 Jy ! Component: 200 - total flux cleaned = -0.00183743 Jy ! Total flux subtracted in 200 components = -0.00183743 Jy ! Clean residual min=-0.013663 max=0.014024 Jy/beam ! Clean residual mean=0.000004 rms=0.003075 Jy/beam ! Combined flux in latest and established models = 1.16232 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 1.16232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081067Jy sigma=0.444097 ! Fit after self-cal, rms=0.081043Jy sigma=0.443638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081043Jy sigma=0.443638 ! Fit after self-cal, rms=0.068358Jy sigma=0.383984 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.734 mas, bmaj=1.701 mas, bpa=-1.991 degrees ! Estimated noise=1.98986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00279545 Jy ! Component: 100 - total flux cleaned = -0.00350904 Jy ! Component: 150 - total flux cleaned = -0.00317647 Jy ! Component: 200 - total flux cleaned = -0.00287941 Jy ! Total flux subtracted in 200 components = -0.00287941 Jy ! Clean residual min=-0.007072 max=0.008958 Jy/beam ! Clean residual mean=0.000006 rms=0.001685 Jy/beam ! Combined flux in latest and established models = 1.15944 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 1.15944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066756Jy sigma=0.373629 ! Fit after self-cal, rms=0.066471Jy sigma=0.372310 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.4, -21.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612362 Jy ! Component: 100 - total flux cleaned = 0.00797002 Jy ! Component: 150 - total flux cleaned = 0.00921215 Jy ! Component: 200 - total flux cleaned = 0.010306 Jy ! Total flux subtracted in 200 components = 0.010306 Jy ! Clean residual min=-0.006680 max=0.006829 Jy/beam ! Clean residual mean=0.000009 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 1.16975 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 1.16975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065501Jy sigma=0.366307 ! Fit after self-cal, rms=0.065431Jy sigma=0.366006 ! Inverting map ! Added new window around map position (10.2, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612424 Jy ! Component: 100 - total flux cleaned = 0.00739949 Jy ! Component: 150 - total flux cleaned = 0.00836199 Jy ! Component: 200 - total flux cleaned = 0.00878929 Jy ! Total flux subtracted in 200 components = 0.00878929 Jy ! Clean residual min=-0.006162 max=0.006666 Jy/beam ! Clean residual mean=0.000009 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 1.17854 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 94 components and 1.17854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064682Jy sigma=0.361396 ! Fit after self-cal, rms=0.064648Jy sigma=0.361128 ! Inverting map ! Added new window around map position (7.6, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00551201 Jy ! Component: 100 - total flux cleaned = 0.00720444 Jy ! Component: 150 - total flux cleaned = 0.00864784 Jy ! Component: 200 - total flux cleaned = 0.00992731 Jy ! Total flux subtracted in 200 components = 0.00992731 Jy ! Clean residual min=-0.005760 max=0.004890 Jy/beam ! Clean residual mean=0.000012 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 1.18847 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 111 components and 1.18847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063977Jy sigma=0.357412 ! Fit after self-cal, rms=0.063911Jy sigma=0.357126 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063911Jy sigma=0.357126 ! Fit after self-cal, rms=0.063284Jy sigma=0.354158 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7329 mas, bmaj=1.7 mas, bpa=-1.964 degrees ! Estimated noise=1.98703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209064 Jy ! Component: 100 - total flux cleaned = -0.00113463 Jy ! Component: 150 - total flux cleaned = 0.000195326 Jy ! Component: 200 - total flux cleaned = 0.000816972 Jy ! Total flux subtracted in 200 components = 0.000816972 Jy ! Clean residual min=-0.004565 max=0.004228 Jy/beam ! Clean residual mean=0.000010 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 1.18928 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 124 components and 1.18928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062869Jy sigma=0.351744 ! Fit after self-cal, rms=0.062813Jy sigma=0.351574 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123061 Jy ! Component: 100 - total flux cleaned = 0.000583932 Jy ! Component: 150 - total flux cleaned = 0.000779728 Jy ! Component: 200 - total flux cleaned = 0.000964854 Jy ! Total flux subtracted in 200 components = 0.000964854 Jy ! Clean residual min=-0.004359 max=0.004143 Jy/beam ! Clean residual mean=0.000011 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 1.19025 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 128 components and 1.19025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062664Jy sigma=0.350749 ! Fit after self-cal, rms=0.062646Jy sigma=0.350711 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062646Jy sigma=0.350711 ! Fit after self-cal, rms=0.062546Jy sigma=0.350107 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.774 mas, bmaj=3.144 mas, bpa=2.85 degrees ! Estimated noise=3.01213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105986 Jy ! Component: 100 - total flux cleaned = 0.000910313 Jy ! Component: 150 - total flux cleaned = 0.00097944 Jy ! Component: 200 - total flux cleaned = 0.00103769 Jy ! Total flux subtracted in 200 components = 0.00103769 Jy ! Clean residual min=-0.005442 max=0.005529 Jy/beam ! Clean residual mean=0.000026 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 1.19129 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 136 components and 1.19129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062516Jy sigma=0.350013 ! Fit after self-cal, rms=0.062493Jy sigma=0.349882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116664 Jy ! Component: 100 - total flux cleaned = 5.64521e-05 Jy ! Component: 150 - total flux cleaned = 0.000156796 Jy ! Component: 200 - total flux cleaned = 0.000200761 Jy ! Total flux subtracted in 200 components = 0.000200761 Jy ! Clean residual min=-0.005459 max=0.005273 Jy/beam ! Clean residual mean=0.000026 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 1.19149 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 141 components and 1.19149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062506Jy sigma=0.349983 ! Fit after self-cal, rms=0.062490Jy sigma=0.349930 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7324 mas, bmaj=1.7 mas, bpa=-1.985 degrees ! Estimated noise=1.98585 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7324 x 1.7 at -1.985 degrees (North through East) ! Clean map min=-0.0035604 max=0.82239 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062490Jy sigma=0.349930 ! Fit after self-cal, rms=0.058701Jy sigma=0.321667 ! Inverting map and beam ! Estimated beam: bmin=0.7317 mas, bmaj=1.699 mas, bpa=-2.051 degrees ! Estimated noise=1.98651 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373547 Jy ! Component: 100 - total flux cleaned = -2.96493e-05 Jy ! Component: 150 - total flux cleaned = -2.89878e-05 Jy ! Component: 200 - total flux cleaned = -2.68097e-05 Jy ! Total flux subtracted in 200 components = -2.68097e-05 Jy ! Clean residual min=-0.003826 max=0.003468 Jy/beam ! Clean residual mean=0.000008 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 1.19146 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 161 components and 1.19146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058543Jy sigma=0.320565 ! Fit after self-cal, rms=0.058516Jy sigma=0.320499 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.5971e-05 Jy ! Component: 100 - total flux cleaned = -0.000435673 Jy ! Component: 150 - total flux cleaned = -0.000715116 Jy ! Component: 200 - total flux cleaned = -0.00102614 Jy ! Total flux subtracted in 200 components = -0.00102614 Jy ! Clean residual min=-0.003658 max=0.003345 Jy/beam ! Clean residual mean=0.000008 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 1.19043 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 166 components and 1.19043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058443Jy sigma=0.320014 ! Fit after self-cal, rms=0.058435Jy sigma=0.319999 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058435Jy sigma=0.319999 ! Fit after self-cal, rms=0.058385Jy sigma=0.319794 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6248 mas, bmaj=1.489 mas, bpa=-1.74 degrees ! Estimated noise=2.62112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.594247 Jy ! Component: 100 - total flux cleaned = 0.748068 Jy ! Component: 150 - total flux cleaned = 0.836486 Jy ! Component: 200 - total flux cleaned = 0.901415 Jy ! Total flux subtracted in 200 components = 0.901415 Jy ! Clean residual min=-0.018662 max=0.037387 Jy/beam ! Clean residual mean=0.000064 rms=0.005558 Jy/beam ! Combined flux in latest and established models = 0.901415 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.901415 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7313 mas, bmaj=1.699 mas, bpa=-2.06 degrees ! Estimated noise=1.98575 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0800012 Jy ! Component: 100 - total flux cleaned = 0.130053 Jy ! Component: 150 - total flux cleaned = 0.162831 Jy ! Component: 200 - total flux cleaned = 0.185429 Jy ! Total flux subtracted in 200 components = 0.185429 Jy ! Clean residual min=-0.008698 max=0.013177 Jy/beam ! Clean residual mean=0.000031 rms=0.002743 Jy/beam ! Combined flux in latest and established models = 1.08684 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 51 components and 1.08684 Jy ! Inverting map ! Added new window around map position (0.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166828 Jy ! Component: 100 - total flux cleaned = 0.0292603 Jy ! Component: 150 - total flux cleaned = 0.0389951 Jy ! Component: 200 - total flux cleaned = 0.0470502 Jy ! Total flux subtracted in 200 components = 0.0470502 Jy ! Clean residual min=-0.005562 max=0.007279 Jy/beam ! Clean residual mean=0.000012 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 1.13389 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 86 components and 1.13389 Jy ! Inverting map ! Added new window around map position (18.4, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00737438 Jy ! Component: 100 - total flux cleaned = 0.0131335 Jy ! Component: 150 - total flux cleaned = 0.0180741 Jy ! Component: 200 - total flux cleaned = 0.0223749 Jy ! Total flux subtracted in 200 components = 0.0223749 Jy ! Clean residual min=-0.004342 max=0.004330 Jy/beam ! Clean residual mean=0.000009 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 1.15627 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 101 components and 1.15627 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.774 mas, bmaj=3.142 mas, bpa=2.802 degrees ! Estimated noise=3.01812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756614 Jy ! Component: 100 - total flux cleaned = 0.0126426 Jy ! Component: 150 - total flux cleaned = 0.0165231 Jy ! Component: 200 - total flux cleaned = 0.0196499 Jy ! Total flux subtracted in 200 components = 0.0196499 Jy ! Clean residual min=-0.004614 max=0.004683 Jy/beam ! Clean residual mean=0.000020 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 1.17592 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258209 Jy ! Component: 100 - total flux cleaned = 0.00449796 Jy ! Component: 150 - total flux cleaned = 0.00584838 Jy ! Component: 200 - total flux cleaned = 0.00678196 Jy ! Total flux subtracted in 200 components = 0.00678196 Jy ! Clean residual min=-0.004133 max=0.004107 Jy/beam ! Clean residual mean=0.000018 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 1.1827 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 154 components and 1.1827 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7313 mas, bmaj=1.699 mas, bpa=-2.06 degrees ! Estimated noise=1.98575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192796 Jy ! Component: 100 - total flux cleaned = 0.00243808 Jy ! Component: 150 - total flux cleaned = 0.00296452 Jy ! Component: 200 - total flux cleaned = 0.00344667 Jy ! Total flux subtracted in 200 components = 0.00344667 Jy ! Clean residual min=-0.003652 max=0.003212 Jy/beam ! Clean residual mean=0.000006 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 1.18615 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 177 components and 1.18615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058320Jy sigma=0.319121 ! Fit after self-cal, rms=0.058255Jy sigma=0.318617 wmodel J0650-1637_X_j_map.mod ! Writing 177 model components to file: J0650-1637_X_j_map.mod wobs J0650-1637_X_j_uvs.fits ! Writing UV FITS file: J0650-1637_X_j_uvs.fits wwins J0650-1637_X_j_map.win ! wwins: Wrote 8 windows to J0650-1637_X_j_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000873001 Jy ! Component: 100 - total flux cleaned = -0.00131945 Jy ! Component: 150 - total flux cleaned = -0.00179341 Jy ! Component: 200 - total flux cleaned = -0.00229563 Jy ! Component: 250 - total flux cleaned = -0.00268087 Jy ! Component: 300 - total flux cleaned = -0.00291401 Jy ! Component: 350 - total flux cleaned = -0.00304981 Jy ! Component: 400 - total flux cleaned = -0.00313718 Jy ! Component: 450 - total flux cleaned = -0.00318025 Jy ! Component: 500 - total flux cleaned = -0.00326301 Jy ! Component: 550 - total flux cleaned = -0.00330361 Jy ! Component: 600 - total flux cleaned = -0.00330357 Jy ! Component: 650 - total flux cleaned = -0.00330353 Jy ! Component: 700 - total flux cleaned = -0.00334116 Jy ! Component: 750 - total flux cleaned = -0.00330337 Jy ! Component: 800 - total flux cleaned = -0.00326696 Jy ! Component: 850 - total flux cleaned = -0.00326641 Jy ! Component: 900 - total flux cleaned = -0.00326563 Jy ! Component: 950 - total flux cleaned = -0.00323106 Jy ! Component: 1000 - total flux cleaned = -0.00319743 Jy ! Component: 1050 - total flux cleaned = -0.00313131 Jy ! Component: 1100 - total flux cleaned = -0.00300226 Jy ! Component: 1150 - total flux cleaned = -0.00297048 Jy ! Component: 1200 - total flux cleaned = -0.00287674 Jy ! Component: 1250 - total flux cleaned = -0.00287605 Jy ! Component: 1300 - total flux cleaned = -0.0026638 Jy ! Component: 1350 - total flux cleaned = -0.00269316 Jy ! Component: 1400 - total flux cleaned = -0.00251664 Jy ! Component: 1450 - total flux cleaned = -0.00245841 Jy ! Component: 1500 - total flux cleaned = -0.00234394 Jy ! Component: 1550 - total flux cleaned = -0.00234419 Jy ! Component: 1600 - total flux cleaned = -0.0022882 Jy ! Component: 1650 - total flux cleaned = -0.00223351 Jy ! Component: 1700 - total flux cleaned = -0.00220641 Jy ! Component: 1750 - total flux cleaned = -0.00212592 Jy ! Component: 1800 - total flux cleaned = -0.00209959 Jy ! Component: 1850 - total flux cleaned = -0.00204665 Jy ! Component: 1900 - total flux cleaned = -0.00191707 Jy ! Component: 1950 - total flux cleaned = -0.00186608 Jy ! Component: 2000 - total flux cleaned = -0.0017903 Jy ! Component: 2050 - total flux cleaned = -0.00179034 Jy ! Component: 2100 - total flux cleaned = -0.00174036 Jy ! Component: 2150 - total flux cleaned = -0.0016912 Jy ! Component: 2200 - total flux cleaned = -0.00154529 Jy ! Component: 2250 - total flux cleaned = -0.00161805 Jy ! Component: 2300 - total flux cleaned = -0.00161791 Jy ! Component: 2350 - total flux cleaned = -0.00161714 Jy ! Component: 2400 - total flux cleaned = -0.00157022 Jy ! Component: 2450 - total flux cleaned = -0.00152381 Jy ! Component: 2500 - total flux cleaned = -0.00157003 Jy ! Component: 2550 - total flux cleaned = -0.00161536 Jy ! Component: 2600 - total flux cleaned = -0.00159265 Jy ! Component: 2650 - total flux cleaned = -0.0016374 Jy ! Component: 2700 - total flux cleaned = -0.00161522 Jy ! Component: 2750 - total flux cleaned = -0.00165912 Jy ! Component: 2800 - total flux cleaned = -0.00159402 Jy ! Component: 2850 - total flux cleaned = -0.00161595 Jy ! Component: 2900 - total flux cleaned = -0.00168054 Jy ! Component: 2950 - total flux cleaned = -0.00176581 Jy ! Component: 3000 - total flux cleaned = -0.0016814 Jy ! Component: 3050 - total flux cleaned = -0.00182825 Jy ! Component: 3100 - total flux cleaned = -0.00186958 Jy ! Component: 3150 - total flux cleaned = -0.00184886 Jy ! Component: 3200 - total flux cleaned = -0.00188996 Jy ! Component: 3250 - total flux cleaned = -0.00191058 Jy ! Component: 3300 - total flux cleaned = -0.00201153 Jy ! Component: 3350 - total flux cleaned = -0.00205151 Jy ! Component: 3400 - total flux cleaned = -0.00207136 Jy ! Component: 3450 - total flux cleaned = -0.00209099 Jy ! Component: 3500 - total flux cleaned = -0.00211066 Jy ! Component: 3550 - total flux cleaned = -0.00216927 Jy ! Component: 3600 - total flux cleaned = -0.00211126 Jy ! Component: 3650 - total flux cleaned = -0.00213052 Jy ! Component: 3700 - total flux cleaned = -0.00214957 Jy ! Component: 3750 - total flux cleaned = -0.00213049 Jy ! Component: 3800 - total flux cleaned = -0.00209276 Jy ! Component: 3850 - total flux cleaned = -0.00207425 Jy ! Component: 3900 - total flux cleaned = -0.00214858 Jy ! Component: 3950 - total flux cleaned = -0.00211161 Jy ! Component: 4000 - total flux cleaned = -0.00212989 Jy ! Component: 4050 - total flux cleaned = -0.00211162 Jy ! Total flux subtracted in 4096 components = -0.00223858 Jy ! Clean residual min=-0.000923 max=0.000997 Jy/beam ! Clean residual mean=-0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 1.18391 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 475 components and 1.18391 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0650-1637_X_j_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7313 x 1.699 at -2.06 degrees (North through East) ! Clean map min=-0.0015404 max=0.82665 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0650-1637_X_j_map.fits wmodel /image_prod/ug002_uva//J0650-1637_X_j_map.mod ! Writing 475 model components to file: /image_prod/ug002_uva//J0650-1637_X_j_map.mod wobs /image_prod/ug002_uva//J0650-1637_X_j_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0650-1637_X_j_uvs.fits wwins /image_prod/ug002_uva//J0650-1637_X_j_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J0650-1637_X_j_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.826648 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000299962 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.10886 0.10886 0.217719 0.435439 0.870878 1.74176 3.48351 6.96702 13.934 27.8681 55.7362 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.826 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2755.84 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0650-1637_X_j_dfm.log closed on Wed Mar 4 21:32:48 2020