! Started logfile: /image_prod/ug002_uva//J0650-1637_X_h_dfm.log on Wed Mar 4 21:32:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0650-1637_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0650-1637_X_h_uva.fits ! AN table 1: 6 integrations on 36 of 36 possible baselines. ! AN table 2: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.795833 visibilities/baseline/integration-bin. ! Found source: J0650-1637 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6876 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0650-1637_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.352654Jy sigma=7.840221 ! Fit after self-cal, rms=0.315264Jy sigma=1.964197 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6123 mas, bmaj=1.56 mas, bpa=-1.501 degrees ! Estimated noise=1.93242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.590858 Jy ! Component: 100 - total flux cleaned = 0.739315 Jy ! Total flux subtracted in 100 components = 0.739315 Jy ! Clean residual min=-0.038725 max=0.089185 Jy/beam ! Clean residual mean=0.000102 rms=0.009530 Jy/beam ! Combined flux in latest and established models = 0.739315 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.739315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.289563Jy sigma=1.553912 ! Fit after self-cal, rms=0.289441Jy sigma=1.553467 ! Inverting map ! Added new window around map position (-0.8, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0939974 Jy ! Component: 100 - total flux cleaned = 0.158266 Jy ! Total flux subtracted in 100 components = 0.158266 Jy ! Clean residual min=-0.033353 max=0.052746 Jy/beam ! Clean residual mean=0.000066 rms=0.007473 Jy/beam ! Combined flux in latest and established models = 0.897581 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.897581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.223181Jy sigma=1.263205 ! Fit after self-cal, rms=0.221873Jy sigma=1.256852 ! Inverting map ! Added new window around map position (-1.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554372 Jy ! Component: 100 - total flux cleaned = 0.0949282 Jy ! Total flux subtracted in 100 components = 0.0949282 Jy ! Clean residual min=-0.028645 max=0.038132 Jy/beam ! Clean residual mean=0.000047 rms=0.006541 Jy/beam ! Combined flux in latest and established models = 0.992509 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.992509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.193211Jy sigma=1.154579 ! Fit after self-cal, rms=0.192263Jy sigma=1.149196 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7274 mas, bmaj=1.806 mas, bpa=-1.448 degrees ! Estimated noise=1.48541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440247 Jy ! Component: 100 - total flux cleaned = 0.0709852 Jy ! Component: 150 - total flux cleaned = 0.0889613 Jy ! Component: 200 - total flux cleaned = 0.101195 Jy ! Total flux subtracted in 200 components = 0.101195 Jy ! Clean residual min=-0.035732 max=0.049443 Jy/beam ! Clean residual mean=0.000038 rms=0.011993 Jy/beam ! Combined flux in latest and established models = 1.0937 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 1.0937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174567Jy sigma=1.117899 ! Fit after self-cal, rms=0.173808Jy sigma=1.113841 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7274 x 1.806 at -1.448 degrees (North through East) ! Clean map min=-0.032948 max=0.80201 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.98 KP 1.00 ! LA 0.98 MK 1.08 NL 1.05 OV 0.88 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.99 HN 1.07 KP 1.01 ! LA 1.45 MK 1.01 OV 0.88 PT 0.84 ! SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.95 KP 1.02 ! LA 0.98 MK 1.07 NL 1.05 OV 0.89 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.95 HN 1.04 KP 1.01 ! LA 1.53 MK 1.00 OV 0.90 PT 0.86 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.97 KP 1.00 ! LA 0.96 MK 1.09 NL 1.06 OV 0.87 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 HN 1.04 KP 1.02 ! LA 1.44 MK 1.01 OV 0.88 PT 0.86 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.97 KP 1.00 ! LA 0.96 MK 1.06 NL 1.06 OV 0.87 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.96 HN 1.02 KP 0.99 ! LA 1.48 MK 0.97 OV 0.90 PT 0.82 ! SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.96 KP 0.97 ! LA 0.95 MK 1.09 NL 1.06 OV 0.89 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.97 HN 1.03 KP 0.99 ! LA 1.43 MK 0.99 OV 0.90 PT 0.82 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.96 KP 0.99 ! LA 0.95 MK 1.08 NL 1.04 OV 0.87 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.97 HN 1.04 KP 0.99 ! LA 1.46 MK 0.99 OV 0.89 PT 0.84 ! SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.98 HN 0.93 KP 0.98 ! LA 0.95 MK 1.09 NL 1.03 OV 0.88 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.97 HN 1.03 KP 0.98 ! LA 1.54 MK 1.01 OV 0.88 PT 0.82 ! SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 0.95 KP 0.98 ! LA 0.95 MK 1.08 NL 1.08 OV 0.87 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 HN 1.02 KP 0.99 ! LA 1.38 MK 0.98 OV 0.88 PT 0.82 ! SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 0.97 KP 0.97 ! LA 0.96 MK 1.07 NL 1.05 OV 0.87 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.96 HN 1.04 KP 1.00 ! LA 1.38 MK 0.95 OV 0.88 PT 0.83 ! SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.96 KP 0.96 ! LA 0.95 MK 1.07 NL 1.02 OV 0.89 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.96 HN 1.03 KP 0.96 ! LA 1.45 MK 0.97 OV 0.92 PT 0.80 ! SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.97 HN 0.96 KP 0.98 ! LA 0.96 MK 1.13 NL 1.05 OV 0.85 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 HN 1.04 KP 0.98 ! LA 1.44 MK 0.96 OV 0.87 PT 0.84 ! SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.96 KP 0.98 ! LA 0.96 MK 1.13 NL 1.03 OV 0.86 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.95 HN 1.04 KP 0.98 ! LA 1.43 MK 0.96 OV 0.88 PT 0.82 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.173808Jy sigma=1.113841 ! Fit after self-cal, rms=0.158043Jy sigma=0.719390 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7298 mas, bmaj=1.814 mas, bpa=-1.22 degrees ! Estimated noise=1.4906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00992635 Jy ! Component: 100 - total flux cleaned = 0.0123399 Jy ! Component: 150 - total flux cleaned = 0.0143427 Jy ! Component: 200 - total flux cleaned = 0.0160658 Jy ! Total flux subtracted in 200 components = 0.0160658 Jy ! Clean residual min=-0.027951 max=0.025036 Jy/beam ! Clean residual mean=0.000047 rms=0.006622 Jy/beam ! Combined flux in latest and established models = 1.10977 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 1.10977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156590Jy sigma=0.716472 ! Fit after self-cal, rms=0.156548Jy sigma=0.715663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156548Jy sigma=0.715663 ! Fit after self-cal, rms=0.111967Jy sigma=0.528917 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7266 mas, bmaj=1.807 mas, bpa=-1.286 degrees ! Estimated noise=1.51076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140033 Jy ! Component: 100 - total flux cleaned = 0.0191855 Jy ! Component: 150 - total flux cleaned = 0.0218038 Jy ! Component: 200 - total flux cleaned = 0.02398 Jy ! Total flux subtracted in 200 components = 0.02398 Jy ! Clean residual min=-0.018623 max=0.012618 Jy/beam ! Clean residual mean=0.000035 rms=0.003905 Jy/beam ! Combined flux in latest and established models = 1.13375 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 70 components and 1.13375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108940Jy sigma=0.516695 ! Fit after self-cal, rms=0.108834Jy sigma=0.515977 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016978 Jy ! Component: 100 - total flux cleaned = 0.00341527 Jy ! Component: 150 - total flux cleaned = 0.00485497 Jy ! Component: 200 - total flux cleaned = 0.00608516 Jy ! Total flux subtracted in 200 components = 0.00608516 Jy ! Clean residual min=-0.019052 max=0.012445 Jy/beam ! Clean residual mean=0.000033 rms=0.003883 Jy/beam ! Combined flux in latest and established models = 1.13984 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 1.13984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108126Jy sigma=0.512874 ! Fit after self-cal, rms=0.108063Jy sigma=0.512530 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108063Jy sigma=0.512530 ! Fit after self-cal, rms=0.068601Jy sigma=0.359635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7259 mas, bmaj=1.806 mas, bpa=-1.296 degrees ! Estimated noise=1.50898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00428803 Jy ! Component: 100 - total flux cleaned = -0.00364271 Jy ! Component: 150 - total flux cleaned = -0.00277023 Jy ! Component: 200 - total flux cleaned = -0.00205495 Jy ! Total flux subtracted in 200 components = -0.00205495 Jy ! Clean residual min=-0.005540 max=0.006517 Jy/beam ! Clean residual mean=-0.000000 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 1.13778 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 1.13778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067588Jy sigma=0.353713 ! Fit after self-cal, rms=0.067369Jy sigma=0.352552 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471312 Jy ! Component: 100 - total flux cleaned = 0.00574006 Jy ! Component: 150 - total flux cleaned = 0.00684407 Jy ! Component: 200 - total flux cleaned = 0.00779514 Jy ! Total flux subtracted in 200 components = 0.00779514 Jy ! Clean residual min=-0.004304 max=0.006107 Jy/beam ! Clean residual mean=0.000001 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 1.14558 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 1.14558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066621Jy sigma=0.348372 ! Fit after self-cal, rms=0.066560Jy sigma=0.348109 ! Inverting map ! Added new window around map position (-2.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458352 Jy ! Component: 100 - total flux cleaned = 0.00520328 Jy ! Component: 150 - total flux cleaned = 0.00550232 Jy ! Component: 200 - total flux cleaned = 0.00586539 Jy ! Total flux subtracted in 200 components = 0.00586539 Jy ! Clean residual min=-0.003579 max=0.003678 Jy/beam ! Clean residual mean=-0.000000 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 1.15144 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 1.15144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066027Jy sigma=0.344902 ! Fit after self-cal, rms=0.066004Jy sigma=0.344678 ! Inverting map ! Added new window around map position (12.6, -38.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299288 Jy ! Component: 100 - total flux cleaned = 0.0032751 Jy ! Component: 150 - total flux cleaned = 0.00351451 Jy ! Component: 200 - total flux cleaned = 0.0038097 Jy ! Total flux subtracted in 200 components = 0.0038097 Jy ! Clean residual min=-0.003396 max=0.003472 Jy/beam ! Clean residual mean=-0.000001 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 1.15525 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 122 components and 1.15525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065746Jy sigma=0.343150 ! Fit after self-cal, rms=0.065736Jy sigma=0.343086 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065736Jy sigma=0.343086 ! Fit after self-cal, rms=0.065474Jy sigma=0.341327 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.988 mas, bmaj=3.647 mas, bpa=5.334 degrees ! Estimated noise=2.32219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284217 Jy ! Component: 100 - total flux cleaned = 0.00389086 Jy ! Component: 150 - total flux cleaned = 0.00441294 Jy ! Component: 200 - total flux cleaned = 0.00479258 Jy ! Total flux subtracted in 200 components = 0.00479258 Jy ! Clean residual min=-0.004006 max=0.005116 Jy/beam ! Clean residual mean=-0.000002 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 1.16004 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 138 components and 1.16004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065352Jy sigma=0.341097 ! Fit after self-cal, rms=0.065341Jy sigma=0.340963 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15, 13.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267849 Jy ! Component: 100 - total flux cleaned = 0.00325142 Jy ! Component: 150 - total flux cleaned = 0.00364782 Jy ! Component: 200 - total flux cleaned = 0.00385782 Jy ! Total flux subtracted in 200 components = 0.00385782 Jy ! Clean residual min=-0.003801 max=0.004017 Jy/beam ! Clean residual mean=-0.000003 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 1.1639 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 173 components and 1.1639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065176Jy sigma=0.340263 ! Fit after self-cal, rms=0.065170Jy sigma=0.340192 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7254 mas, bmaj=1.806 mas, bpa=-1.337 degrees ! Estimated noise=1.50784 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7254 x 1.806 at -1.337 degrees (North through East) ! Clean map min=-0.0032102 max=0.81259 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065170Jy sigma=0.340192 ! Fit after self-cal, rms=0.060653Jy sigma=0.312551 ! Inverting map and beam ! Estimated beam: bmin=0.7252 mas, bmaj=1.806 mas, bpa=-1.401 degrees ! Estimated noise=1.50907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122108 Jy ! Component: 100 - total flux cleaned = 0.00165449 Jy ! Component: 150 - total flux cleaned = 0.00211257 Jy ! Component: 200 - total flux cleaned = 0.00231774 Jy ! Total flux subtracted in 200 components = 0.00231774 Jy ! Clean residual min=-0.002615 max=0.002773 Jy/beam ! Clean residual mean=-0.000001 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 1.16622 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 199 components and 1.16622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060462Jy sigma=0.311183 ! Fit after self-cal, rms=0.060455Jy sigma=0.311127 ! Inverting map ! Added new window around map position (2.6, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200067 Jy ! Component: 100 - total flux cleaned = 0.0021318 Jy ! Component: 150 - total flux cleaned = 0.00237978 Jy ! Component: 200 - total flux cleaned = 0.00267224 Jy ! Total flux subtracted in 200 components = 0.00267224 Jy ! Clean residual min=-0.002353 max=0.002647 Jy/beam ! Clean residual mean=-0.000001 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 1.16889 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 222 components and 1.16889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060300Jy sigma=0.310180 ! Fit after self-cal, rms=0.060297Jy sigma=0.310151 ! Inverting map ! Added new window around map position (-3, -18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164069 Jy ! Component: 100 - total flux cleaned = 0.00201105 Jy ! Component: 150 - total flux cleaned = 0.00212756 Jy ! Component: 200 - total flux cleaned = 0.00223238 Jy ! Total flux subtracted in 200 components = 0.00223238 Jy ! Clean residual min=-0.002381 max=0.002273 Jy/beam ! Clean residual mean=-0.000001 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 1.17112 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 243 components and 1.17112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060164Jy sigma=0.309354 ! Fit after self-cal, rms=0.060161Jy sigma=0.309324 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060161Jy sigma=0.309324 ! Fit after self-cal, rms=0.060116Jy sigma=0.309175 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6124 mas, bmaj=1.564 mas, bpa=-1.421 degrees ! Estimated noise=1.94372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.593424 Jy ! Component: 100 - total flux cleaned = 0.749336 Jy ! Component: 150 - total flux cleaned = 0.840684 Jy ! Component: 200 - total flux cleaned = 0.906348 Jy ! Total flux subtracted in 200 components = 0.906348 Jy ! Clean residual min=-0.012839 max=0.037334 Jy/beam ! Clean residual mean=0.000053 rms=0.004043 Jy/beam ! Combined flux in latest and established models = 0.906347 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.906347 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7251 mas, bmaj=1.807 mas, bpa=-1.409 degrees ! Estimated noise=1.50844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0819332 Jy ! Component: 100 - total flux cleaned = 0.131486 Jy ! Component: 150 - total flux cleaned = 0.163414 Jy ! Component: 200 - total flux cleaned = 0.18496 Jy ! Total flux subtracted in 200 components = 0.18496 Jy ! Clean residual min=-0.005762 max=0.012749 Jy/beam ! Clean residual mean=0.000019 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 1.09131 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 51 components and 1.09131 Jy ! Inverting map ! Added new window around map position (0.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015059 Jy ! Component: 100 - total flux cleaned = 0.0257047 Jy ! Component: 150 - total flux cleaned = 0.0334607 Jy ! Component: 200 - total flux cleaned = 0.0395906 Jy ! Total flux subtracted in 200 components = 0.0395906 Jy ! Clean residual min=-0.004333 max=0.004621 Jy/beam ! Clean residual mean=0.000006 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 1.1309 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 76 components and 1.1309 Jy ! Inverting map ! Added new window around map position (-7.6, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00537537 Jy ! Component: 100 - total flux cleaned = 0.00987269 Jy ! Component: 150 - total flux cleaned = 0.0137919 Jy ! Component: 200 - total flux cleaned = 0.0172665 Jy ! Total flux subtracted in 200 components = 0.0172665 Jy ! Clean residual min=-0.003335 max=0.003283 Jy/beam ! Clean residual mean=0.000003 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 1.14816 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 99 components and 1.14816 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.988 mas, bmaj=3.647 mas, bpa=5.316 degrees ! Estimated noise=2.32367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595979 Jy ! Component: 100 - total flux cleaned = 0.0103687 Jy ! Component: 150 - total flux cleaned = 0.0139208 Jy ! Component: 200 - total flux cleaned = 0.0163392 Jy ! Total flux subtracted in 200 components = 0.0163392 Jy ! Clean residual min=-0.003878 max=0.003855 Jy/beam ! Clean residual mean=-0.000000 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 1.1645 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160323 Jy ! Component: 100 - total flux cleaned = 0.00285976 Jy ! Component: 150 - total flux cleaned = 0.00374526 Jy ! Component: 200 - total flux cleaned = 0.00463261 Jy ! Total flux subtracted in 200 components = 0.00463261 Jy ! Clean residual min=-0.003710 max=0.003337 Jy/beam ! Clean residual mean=-0.000003 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 1.16914 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 166 components and 1.16914 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7251 mas, bmaj=1.807 mas, bpa=-1.409 degrees ! Estimated noise=1.50844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000623349 Jy ! Component: 100 - total flux cleaned = 0.00153696 Jy ! Component: 150 - total flux cleaned = 0.00219892 Jy ! Component: 200 - total flux cleaned = 0.00264948 Jy ! Total flux subtracted in 200 components = 0.00264948 Jy ! Clean residual min=-0.002380 max=0.002419 Jy/beam ! Clean residual mean=-0.000001 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 1.17179 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 189 components and 1.17179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060238Jy sigma=0.310002 ! Fit after self-cal, rms=0.060177Jy sigma=0.309622 wmodel J0650-1637_X_h_map.mod ! Writing 189 model components to file: J0650-1637_X_h_map.mod wobs J0650-1637_X_h_uvs.fits ! Writing UV FITS file: J0650-1637_X_h_uvs.fits wwins J0650-1637_X_h_map.win ! wwins: Wrote 11 windows to J0650-1637_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167668 Jy ! Component: 100 - total flux cleaned = 0.000505348 Jy ! Component: 150 - total flux cleaned = 0.000544962 Jy ! Component: 200 - total flux cleaned = 0.000545558 Jy ! Component: 250 - total flux cleaned = 0.00050918 Jy ! Component: 300 - total flux cleaned = 0.000437749 Jy ! Component: 350 - total flux cleaned = 0.000332372 Jy ! Component: 400 - total flux cleaned = 0.000126596 Jy ! Component: 450 - total flux cleaned = -6.70905e-06 Jy ! Component: 500 - total flux cleaned = -0.000137928 Jy ! Component: 550 - total flux cleaned = -0.000170307 Jy ! Component: 600 - total flux cleaned = -0.000327365 Jy ! Component: 650 - total flux cleaned = -0.000388698 Jy ! Component: 700 - total flux cleaned = -0.000540472 Jy ! Component: 750 - total flux cleaned = -0.000570623 Jy ! Component: 800 - total flux cleaned = -0.000717103 Jy ! Component: 850 - total flux cleaned = -0.000745832 Jy ! Component: 900 - total flux cleaned = -0.000774596 Jy ! Component: 950 - total flux cleaned = -0.000831017 Jy ! Component: 1000 - total flux cleaned = -0.000887008 Jy ! Component: 1050 - total flux cleaned = -0.000860298 Jy ! Component: 1100 - total flux cleaned = -0.00102258 Jy ! Component: 1150 - total flux cleaned = -0.000915514 Jy ! Component: 1200 - total flux cleaned = -0.000994716 Jy ! Component: 1250 - total flux cleaned = -0.000968882 Jy ! Component: 1300 - total flux cleaned = -0.00104622 Jy ! Component: 1350 - total flux cleaned = -0.000918798 Jy ! Component: 1400 - total flux cleaned = -0.000918552 Jy ! Component: 1450 - total flux cleaned = -0.000868878 Jy ! Component: 1500 - total flux cleaned = -0.000819469 Jy ! Component: 1550 - total flux cleaned = -0.000722065 Jy ! Component: 1600 - total flux cleaned = -0.000843232 Jy ! Component: 1650 - total flux cleaned = -0.000746933 Jy ! Component: 1700 - total flux cleaned = -0.000628084 Jy ! Component: 1750 - total flux cleaned = -0.000557294 Jy ! Component: 1800 - total flux cleaned = -0.000510577 Jy ! Component: 1850 - total flux cleaned = -0.000417985 Jy ! Component: 1900 - total flux cleaned = -0.000349265 Jy ! Component: 1950 - total flux cleaned = -0.00021311 Jy ! Component: 2000 - total flux cleaned = -0.000190769 Jy ! Component: 2050 - total flux cleaned = -7.8992e-05 Jy ! Component: 2100 - total flux cleaned = 3.17428e-05 Jy ! Component: 2150 - total flux cleaned = -1.22975e-05 Jy ! Component: 2200 - total flux cleaned = 0.000248802 Jy ! Component: 2250 - total flux cleaned = 0.000291908 Jy ! Component: 2300 - total flux cleaned = 0.000420137 Jy ! Component: 2350 - total flux cleaned = 0.000526004 Jy ! Component: 2400 - total flux cleaned = 0.000610066 Jy ! Component: 2450 - total flux cleaned = 0.000694151 Jy ! Component: 2500 - total flux cleaned = 0.000818392 Jy ! Component: 2550 - total flux cleaned = 0.000941551 Jy ! Component: 2600 - total flux cleaned = 0.001023 Jy ! Component: 2650 - total flux cleaned = 0.00106361 Jy ! Component: 2700 - total flux cleaned = 0.00116445 Jy ! Component: 2750 - total flux cleaned = 0.00126403 Jy ! Component: 2800 - total flux cleaned = 0.00144227 Jy ! Component: 2850 - total flux cleaned = 0.00152068 Jy ! Component: 2900 - total flux cleaned = 0.00161824 Jy ! Component: 2950 - total flux cleaned = 0.0016764 Jy ! Component: 3000 - total flux cleaned = 0.00179193 Jy ! Component: 3050 - total flux cleaned = 0.00179183 Jy ! Component: 3100 - total flux cleaned = 0.00198158 Jy ! Component: 3150 - total flux cleaned = 0.00205668 Jy ! Component: 3200 - total flux cleaned = 0.00203791 Jy ! Component: 3250 - total flux cleaned = 0.00205661 Jy ! Component: 3300 - total flux cleaned = 0.00224111 Jy ! Component: 3350 - total flux cleaned = 0.002296 Jy ! Component: 3400 - total flux cleaned = 0.00236882 Jy ! Component: 3450 - total flux cleaned = 0.00247719 Jy ! Component: 3500 - total flux cleaned = 0.00262086 Jy ! Component: 3550 - total flux cleaned = 0.00267439 Jy ! Component: 3600 - total flux cleaned = 0.00267432 Jy ! Component: 3650 - total flux cleaned = 0.00285087 Jy ! Component: 3700 - total flux cleaned = 0.00288607 Jy ! Component: 3750 - total flux cleaned = 0.00300811 Jy ! Component: 3800 - total flux cleaned = 0.00306 Jy ! Component: 3850 - total flux cleaned = 0.00309451 Jy ! Component: 3900 - total flux cleaned = 0.00314596 Jy ! Component: 3950 - total flux cleaned = 0.00312908 Jy ! Component: 4000 - total flux cleaned = 0.00326472 Jy ! Component: 4050 - total flux cleaned = 0.00329823 Jy ! Total flux subtracted in 4096 components = 0.00334853 Jy ! Clean residual min=-0.001265 max=0.001055 Jy/beam ! Clean residual mean=-0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 1.17513 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 501 components and 1.17513 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0650-1637_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7251 x 1.807 at -1.409 degrees (North through East) ! Clean map min=-0.0018454 max=0.81651 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0650-1637_X_h_map.fits wmodel /image_prod/ug002_uva//J0650-1637_X_h_map.mod ! Writing 501 model components to file: /image_prod/ug002_uva//J0650-1637_X_h_map.mod wobs /image_prod/ug002_uva//J0650-1637_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0650-1637_X_h_uvs.fits wwins /image_prod/ug002_uva//J0650-1637_X_h_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J0650-1637_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.816511 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000289933 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.106526 0.106526 0.213053 0.426106 0.852211 1.70442 3.40885 6.81769 13.6354 27.2708 54.5415 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.816 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2816.2 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0650-1637_X_h_dfm.log closed on Wed Mar 4 21:32:37 2020