! Started logfile: /image_prod/ug002_uva//J0650-1637_X_g_dfm.log on Wed Mar 4 21:32:26 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0650-1637_X_g_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0650-1637_X_g_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.829861 visibilities/baseline/integration-bin. ! Found source: J0650-1637 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 8604 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0650-1637_X_g] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.430891Jy sigma=7.815203 ! Fit after self-cal, rms=0.278815Jy sigma=1.552488 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6246 mas, bmaj=1.74 mas, bpa=2.899 degrees ! Estimated noise=1.95887 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.640132 Jy ! Component: 100 - total flux cleaned = 0.810223 Jy ! Total flux subtracted in 100 components = 0.810223 Jy ! Clean residual min=-0.041951 max=0.099751 Jy/beam ! Clean residual mean=-0.000079 rms=0.009753 Jy/beam ! Combined flux in latest and established models = 0.810224 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.810224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.298317Jy sigma=1.481985 ! Fit after self-cal, rms=0.298205Jy sigma=1.481169 ! Inverting map ! Added new window around map position (-0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109022 Jy ! Component: 100 - total flux cleaned = 0.183262 Jy ! Total flux subtracted in 100 components = 0.183262 Jy ! Clean residual min=-0.028782 max=0.044431 Jy/beam ! Clean residual mean=-0.000039 rms=0.006250 Jy/beam ! Combined flux in latest and established models = 0.993486 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.993486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194316Jy sigma=0.963486 ! Fit after self-cal, rms=0.192566Jy sigma=0.952656 ! Inverting map ! Added new window around map position (-1.4, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572731 Jy ! Component: 100 - total flux cleaned = 0.0984396 Jy ! Total flux subtracted in 100 components = 0.0984396 Jy ! Clean residual min=-0.021521 max=0.033046 Jy/beam ! Clean residual mean=-0.000019 rms=0.004638 Jy/beam ! Combined flux in latest and established models = 1.09193 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 46 components and 1.09193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146890Jy sigma=0.730376 ! Fit after self-cal, rms=0.146041Jy sigma=0.724865 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0343648 Jy ! Component: 100 - total flux cleaned = 0.0605401 Jy ! Total flux subtracted in 100 components = 0.0605401 Jy ! Clean residual min=-0.018997 max=0.026028 Jy/beam ! Clean residual mean=-0.000006 rms=0.003889 Jy/beam ! Combined flux in latest and established models = 1.15247 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 62 components and 1.15247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124425Jy sigma=0.623752 ! Fit after self-cal, rms=0.123815Jy sigma=0.619795 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7674 mas, bmaj=2.06 mas, bpa=2.614 degrees ! Estimated noise=1.41523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0409268 Jy ! Component: 100 - total flux cleaned = 0.0664001 Jy ! Component: 150 - total flux cleaned = 0.0828065 Jy ! Component: 200 - total flux cleaned = 0.0934929 Jy ! Total flux subtracted in 200 components = 0.0934929 Jy ! Clean residual min=-0.017472 max=0.021337 Jy/beam ! Clean residual mean=0.000022 rms=0.004337 Jy/beam ! Combined flux in latest and established models = 1.24596 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 77 components and 1.24596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104478Jy sigma=0.539336 ! Fit after self-cal, rms=0.103605Jy sigma=0.534234 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7674 x 2.06 at 2.614 degrees (North through East) ! Clean map min=-0.016567 max=0.87843 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.05 KP 1.06 ! LA 1.05 MK 1.01 OV 0.94 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 1.08 KP 1.05 ! LA 1.05 MK 0.99 OV 0.93 PT 0.91 ! SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.06 KP 1.04 ! LA 1.06 MK 0.97 OV 0.95 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.04 KP 1.05 ! LA 1.06 MK 1.01 OV 0.93 PT 0.91 ! SC 1.02 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.04 KP 1.05 ! LA 1.06 MK 1.00 OV 0.95 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.06 KP 1.04 ! LA 1.05 MK 0.99 OV 0.93 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.04 KP 1.03 ! LA 1.07 MK 1.00 OV 0.93 PT 0.90 ! SC 0.98 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.03 KP 1.05 ! LA 1.05 MK 1.02 OV 0.93 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.04 KP 1.02 ! LA 1.04 MK 1.00 OV 0.92 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.05 KP 1.04 ! LA 1.03 MK 1.01 OV 0.92 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.03 KP 1.04 ! LA 1.03 MK 1.01 OV 0.93 PT 0.92 ! SC 1.03 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.05 KP 1.04 ! LA 1.02 MK 1.00 OV 0.92 PT 0.89 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.103605Jy sigma=0.534234 ! Fit after self-cal, rms=0.076335Jy sigma=0.401863 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7699 mas, bmaj=2.058 mas, bpa=2.747 degrees ! Estimated noise=1.41764 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000482945 Jy ! Component: 100 - total flux cleaned = -0.000477745 Jy ! Component: 150 - total flux cleaned = -0.000810359 Jy ! Component: 200 - total flux cleaned = -0.000805369 Jy ! Total flux subtracted in 200 components = -0.000805369 Jy ! Clean residual min=-0.010273 max=0.010970 Jy/beam ! Clean residual mean=0.000014 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 1.24515 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 82 components and 1.24515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075353Jy sigma=0.396922 ! Fit after self-cal, rms=0.075298Jy sigma=0.396348 ! Inverting map ! Added new window around map position (-9.2, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105468 Jy ! Component: 100 - total flux cleaned = 0.0161266 Jy ! Component: 150 - total flux cleaned = 0.0186125 Jy ! Component: 200 - total flux cleaned = 0.0195141 Jy ! Total flux subtracted in 200 components = 0.0195141 Jy ! Clean residual min=-0.009306 max=0.009526 Jy/beam ! Clean residual mean=0.000011 rms=0.001962 Jy/beam ! Combined flux in latest and established models = 1.26467 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 1.26467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073373Jy sigma=0.388167 ! Fit after self-cal, rms=0.073193Jy sigma=0.386991 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073193Jy sigma=0.386991 ! Fit after self-cal, rms=0.064602Jy sigma=0.342549 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.77 mas, bmaj=2.056 mas, bpa=2.609 degrees ! Estimated noise=1.41958 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00222063 Jy ! Component: 100 - total flux cleaned = -0.00162211 Jy ! Component: 150 - total flux cleaned = -0.00109698 Jy ! Component: 200 - total flux cleaned = -0.000444077 Jy ! Total flux subtracted in 200 components = -0.000444077 Jy ! Clean residual min=-0.005240 max=0.006782 Jy/beam ! Clean residual mean=0.000003 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 1.26422 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 117 components and 1.26422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064175Jy sigma=0.340096 ! Fit after self-cal, rms=0.064128Jy sigma=0.339811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.6, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00659303 Jy ! Component: 100 - total flux cleaned = 0.00962942 Jy ! Component: 150 - total flux cleaned = 0.0107934 Jy ! Component: 200 - total flux cleaned = 0.0119596 Jy ! Total flux subtracted in 200 components = 0.0119596 Jy ! Clean residual min=-0.004390 max=0.004388 Jy/beam ! Clean residual mean=0.000000 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 1.27618 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 1.27618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063331Jy sigma=0.335540 ! Fit after self-cal, rms=0.063296Jy sigma=0.335354 ! Inverting map ! Added new window around map position (-17.4, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417559 Jy ! Component: 100 - total flux cleaned = 0.00598088 Jy ! Component: 150 - total flux cleaned = 0.00737041 Jy ! Component: 200 - total flux cleaned = 0.00830937 Jy ! Total flux subtracted in 200 components = 0.00830937 Jy ! Clean residual min=-0.004158 max=0.003983 Jy/beam ! Clean residual mean=-0.000002 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 1.28449 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 154 components and 1.28449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062916Jy sigma=0.333502 ! Fit after self-cal, rms=0.062884Jy sigma=0.333375 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062884Jy sigma=0.333375 ! Fit after self-cal, rms=0.062732Jy sigma=0.332521 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7697 mas, bmaj=2.055 mas, bpa=2.589 degrees ! Estimated noise=1.41827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016515 Jy ! Component: 100 - total flux cleaned = 0.000883326 Jy ! Component: 150 - total flux cleaned = 0.00172709 Jy ! Component: 200 - total flux cleaned = 0.00229089 Jy ! Total flux subtracted in 200 components = 0.00229089 Jy ! Clean residual min=-0.004025 max=0.003669 Jy/beam ! Clean residual mean=-0.000001 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 1.28678 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 164 components and 1.28678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062518Jy sigma=0.331329 ! Fit after self-cal, rms=0.062502Jy sigma=0.331250 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.89912e-05 Jy ! Component: 100 - total flux cleaned = 0.00054963 Jy ! Component: 150 - total flux cleaned = 0.00109319 Jy ! Component: 200 - total flux cleaned = 0.00143426 Jy ! Total flux subtracted in 200 components = 0.00143426 Jy ! Clean residual min=-0.003718 max=0.003309 Jy/beam ! Clean residual mean=-0.000001 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 1.28822 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 170 components and 1.28822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062386Jy sigma=0.330597 ! Fit after self-cal, rms=0.062375Jy sigma=0.330551 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062375Jy sigma=0.330551 ! Fit after self-cal, rms=0.062341Jy sigma=0.330378 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.257 mas, bmaj=4.267 mas, bpa=9.808 degrees ! Estimated noise=2.10727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198076 Jy ! Component: 100 - total flux cleaned = 0.002391 Jy ! Component: 150 - total flux cleaned = 0.00267852 Jy ! Component: 200 - total flux cleaned = 0.00312413 Jy ! Total flux subtracted in 200 components = 0.00312413 Jy ! Clean residual min=-0.003427 max=0.004125 Jy/beam ! Clean residual mean=-0.000001 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 1.29134 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 188 components and 1.29134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062284Jy sigma=0.330233 ! Fit after self-cal, rms=0.062279Jy sigma=0.330182 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.89171e-05 Jy ! Component: 100 - total flux cleaned = 0.000358373 Jy ! Component: 150 - total flux cleaned = 0.000613598 Jy ! Component: 200 - total flux cleaned = 0.000849737 Jy ! Total flux subtracted in 200 components = 0.000849737 Jy ! Clean residual min=-0.003325 max=0.004051 Jy/beam ! Clean residual mean=-0.000001 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 1.29219 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 193 components and 1.29219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062261Jy sigma=0.330206 ! Fit after self-cal, rms=0.062258Jy sigma=0.330173 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7694 mas, bmaj=2.055 mas, bpa=2.579 degrees ! Estimated noise=1.41727 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7694 x 2.055 at 2.579 degrees (North through East) ! Clean map min=-0.0030201 max=0.87769 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062258Jy sigma=0.330173 ! Fit after self-cal, rms=0.058966Jy sigma=0.306892 ! Inverting map and beam ! Estimated beam: bmin=0.7693 mas, bmaj=2.054 mas, bpa=2.547 degrees ! Estimated noise=1.41793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000452327 Jy ! Component: 100 - total flux cleaned = -0.000386807 Jy ! Component: 150 - total flux cleaned = -0.000332129 Jy ! Component: 200 - total flux cleaned = -0.000283873 Jy ! Total flux subtracted in 200 components = -0.000283873 Jy ! Clean residual min=-0.003514 max=0.003004 Jy/beam ! Clean residual mean=-0.000001 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 1.29191 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 198 components and 1.29191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058856Jy sigma=0.306171 ! Fit after self-cal, rms=0.058839Jy sigma=0.306102 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317462 Jy ! Component: 100 - total flux cleaned = -0.000122993 Jy ! Component: 150 - total flux cleaned = -3.33907e-05 Jy ! Component: 200 - total flux cleaned = 5.07287e-05 Jy ! Total flux subtracted in 200 components = 5.07287e-05 Jy ! Clean residual min=-0.003285 max=0.002844 Jy/beam ! Clean residual mean=-0.000001 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 1.29196 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 205 components and 1.29196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058774Jy sigma=0.305683 ! Fit after self-cal, rms=0.058765Jy sigma=0.305646 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058765Jy sigma=0.305646 ! Fit after self-cal, rms=0.058756Jy sigma=0.305543 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6251 mas, bmaj=1.734 mas, bpa=2.934 degrees ! Estimated noise=1.98161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.639991 Jy ! Component: 100 - total flux cleaned = 0.81734 Jy ! Component: 150 - total flux cleaned = 0.92545 Jy ! Component: 200 - total flux cleaned = 1.00155 Jy ! Total flux subtracted in 200 components = 1.00155 Jy ! Clean residual min=-0.018656 max=0.042624 Jy/beam ! Clean residual mean=-0.000048 rms=0.004892 Jy/beam ! Combined flux in latest and established models = 1.00155 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.00155 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7691 mas, bmaj=2.053 mas, bpa=2.546 degrees ! Estimated noise=1.41731 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0960857 Jy ! Component: 100 - total flux cleaned = 0.150415 Jy ! Component: 150 - total flux cleaned = 0.183331 Jy ! Component: 200 - total flux cleaned = 0.20377 Jy ! Total flux subtracted in 200 components = 0.20377 Jy ! Clean residual min=-0.006578 max=0.012372 Jy/beam ! Clean residual mean=-0.000005 rms=0.001807 Jy/beam ! Combined flux in latest and established models = 1.20532 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 65 components and 1.20532 Jy ! Inverting map ! Added new window around map position (0.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135206 Jy ! Component: 100 - total flux cleaned = 0.0234557 Jy ! Component: 150 - total flux cleaned = 0.0314996 Jy ! Component: 200 - total flux cleaned = 0.0380896 Jy ! Total flux subtracted in 200 components = 0.0380896 Jy ! Clean residual min=-0.004148 max=0.005817 Jy/beam ! Clean residual mean=0.000001 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 1.24341 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 91 components and 1.24341 Jy ! Inverting map ! Added new window around map position (-2.4, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060328 Jy ! Component: 100 - total flux cleaned = 0.0108788 Jy ! Component: 150 - total flux cleaned = 0.0151658 Jy ! Component: 200 - total flux cleaned = 0.018987 Jy ! Total flux subtracted in 200 components = 0.018987 Jy ! Clean residual min=-0.003549 max=0.003433 Jy/beam ! Clean residual mean=0.000001 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 1.2624 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 125 components and 1.2624 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.258 mas, bmaj=4.267 mas, bpa=9.801 degrees ! Estimated noise=2.10856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00630841 Jy ! Component: 100 - total flux cleaned = 0.0109253 Jy ! Component: 150 - total flux cleaned = 0.0146017 Jy ! Component: 200 - total flux cleaned = 0.0176146 Jy ! Total flux subtracted in 200 components = 0.0176146 Jy ! Clean residual min=-0.003773 max=0.003769 Jy/beam ! Clean residual mean=0.000002 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 1.28001 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251401 Jy ! Component: 100 - total flux cleaned = 0.00464623 Jy ! Component: 150 - total flux cleaned = 0.0064674 Jy ! Component: 200 - total flux cleaned = 0.00797646 Jy ! Total flux subtracted in 200 components = 0.00797646 Jy ! Clean residual min=-0.003452 max=0.003482 Jy/beam ! Clean residual mean=0.000001 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 1.28799 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 195 components and 1.28799 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7691 mas, bmaj=2.053 mas, bpa=2.546 degrees ! Estimated noise=1.41731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354761 Jy ! Component: 100 - total flux cleaned = 0.00092982 Jy ! Component: 150 - total flux cleaned = 0.00126342 Jy ! Component: 200 - total flux cleaned = 0.00155668 Jy ! Total flux subtracted in 200 components = 0.00155668 Jy ! Clean residual min=-0.003060 max=0.002583 Jy/beam ! Clean residual mean=0.000000 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 1.28954 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 213 components and 1.28954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058573Jy sigma=0.304743 ! Fit after self-cal, rms=0.058489Jy sigma=0.304291 wmodel J0650-1637_X_g_map.mod ! Writing 213 model components to file: J0650-1637_X_g_map.mod wobs J0650-1637_X_g_uvs.fits ! Writing UV FITS file: J0650-1637_X_g_uvs.fits wwins J0650-1637_X_g_map.win ! wwins: Wrote 8 windows to J0650-1637_X_g_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115391 Jy ! Component: 100 - total flux cleaned = -0.00171533 Jy ! Component: 150 - total flux cleaned = -0.00215597 Jy ! Component: 200 - total flux cleaned = -0.002411 Jy ! Component: 250 - total flux cleaned = -0.00257631 Jy ! Component: 300 - total flux cleaned = -0.0028173 Jy ! Component: 350 - total flux cleaned = -0.0029739 Jy ! Component: 400 - total flux cleaned = -0.00312713 Jy ! Component: 450 - total flux cleaned = -0.00324013 Jy ! Component: 500 - total flux cleaned = -0.00335125 Jy ! Component: 550 - total flux cleaned = -0.00349509 Jy ! Component: 600 - total flux cleaned = -0.00363642 Jy ! Component: 650 - total flux cleaned = -0.00374131 Jy ! Component: 700 - total flux cleaned = -0.00398101 Jy ! Component: 750 - total flux cleaned = -0.00418321 Jy ! Component: 800 - total flux cleaned = -0.00441509 Jy ! Component: 850 - total flux cleaned = -0.00461058 Jy ! Component: 900 - total flux cleaned = -0.00477126 Jy ! Component: 950 - total flux cleaned = -0.0049293 Jy ! Component: 1000 - total flux cleaned = -0.00508536 Jy ! Component: 1050 - total flux cleaned = -0.00514663 Jy ! Component: 1100 - total flux cleaned = -0.00529774 Jy ! Component: 1150 - total flux cleaned = -0.00544682 Jy ! Component: 1200 - total flux cleaned = -0.00562287 Jy ! Component: 1250 - total flux cleaned = -0.00568099 Jy ! Component: 1300 - total flux cleaned = -0.00576699 Jy ! Component: 1350 - total flux cleaned = -0.00579527 Jy ! Component: 1400 - total flux cleaned = -0.00587949 Jy ! Component: 1450 - total flux cleaned = -0.00582458 Jy ! Component: 1500 - total flux cleaned = -0.00598806 Jy ! Component: 1550 - total flux cleaned = -0.00614892 Jy ! Component: 1600 - total flux cleaned = -0.00609602 Jy ! Component: 1650 - total flux cleaned = -0.00604394 Jy ! Component: 1700 - total flux cleaned = -0.00622552 Jy ! Component: 1750 - total flux cleaned = -0.00617385 Jy ! Component: 1800 - total flux cleaned = -0.00630082 Jy ! Component: 1850 - total flux cleaned = -0.00630021 Jy ! Component: 1900 - total flux cleaned = -0.00630032 Jy ! Component: 1950 - total flux cleaned = -0.00627604 Jy ! Component: 2000 - total flux cleaned = -0.00632491 Jy ! Component: 2050 - total flux cleaned = -0.00634881 Jy ! Component: 2100 - total flux cleaned = -0.0062069 Jy ! Component: 2150 - total flux cleaned = -0.00632396 Jy ! Component: 2200 - total flux cleaned = -0.00630073 Jy ! Component: 2250 - total flux cleaned = -0.00623169 Jy ! Component: 2300 - total flux cleaned = -0.00625472 Jy ! Component: 2350 - total flux cleaned = -0.00625504 Jy ! Component: 2400 - total flux cleaned = -0.00623266 Jy ! Component: 2450 - total flux cleaned = -0.00621039 Jy ! Component: 2500 - total flux cleaned = -0.00607929 Jy ! Component: 2550 - total flux cleaned = -0.00607971 Jy ! Component: 2600 - total flux cleaned = -0.00595122 Jy ! Component: 2650 - total flux cleaned = -0.00603567 Jy ! Component: 2700 - total flux cleaned = -0.0059516 Jy ! Component: 2750 - total flux cleaned = -0.00588891 Jy ! Component: 2800 - total flux cleaned = -0.00590923 Jy ! Component: 2850 - total flux cleaned = -0.00584779 Jy ! Component: 2900 - total flux cleaned = -0.00582729 Jy ! Component: 2950 - total flux cleaned = -0.00584735 Jy ! Component: 3000 - total flux cleaned = -0.00582752 Jy ! Component: 3050 - total flux cleaned = -0.00588674 Jy ! Component: 3100 - total flux cleaned = -0.0058471 Jy ! Component: 3150 - total flux cleaned = -0.0058666 Jy ! Component: 3200 - total flux cleaned = -0.00588589 Jy ! Component: 3250 - total flux cleaned = -0.00586669 Jy ! Component: 3300 - total flux cleaned = -0.00580978 Jy ! Component: 3350 - total flux cleaned = -0.00590431 Jy ! Component: 3400 - total flux cleaned = -0.00592322 Jy ! Component: 3450 - total flux cleaned = -0.00592335 Jy ! Component: 3500 - total flux cleaned = -0.00601575 Jy ! Component: 3550 - total flux cleaned = -0.0060341 Jy ! Component: 3600 - total flux cleaned = -0.00599791 Jy ! Component: 3650 - total flux cleaned = -0.00612451 Jy ! Component: 3700 - total flux cleaned = -0.00617827 Jy ! Component: 3750 - total flux cleaned = -0.00619625 Jy ! Component: 3800 - total flux cleaned = -0.0062141 Jy ! Component: 3850 - total flux cleaned = -0.00628425 Jy ! Component: 3900 - total flux cleaned = -0.00637152 Jy ! Component: 3950 - total flux cleaned = -0.00637137 Jy ! Component: 4000 - total flux cleaned = -0.00630252 Jy ! Component: 4050 - total flux cleaned = -0.00640486 Jy ! Total flux subtracted in 4096 components = -0.00635382 Jy ! Clean residual min=-0.001041 max=0.000940 Jy/beam ! Clean residual mean=-0.000000 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 1.28319 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 532 components and 1.28319 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0650-1637_X_g_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7691 x 2.053 at 2.546 degrees (North through East) ! Clean map min=-0.0017515 max=0.88468 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0650-1637_X_g_map.fits wmodel /image_prod/ug002_uva//J0650-1637_X_g_map.mod ! Writing 532 model components to file: /image_prod/ug002_uva//J0650-1637_X_g_map.mod wobs /image_prod/ug002_uva//J0650-1637_X_g_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0650-1637_X_g_uvs.fits wwins /image_prod/ug002_uva//J0650-1637_X_g_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J0650-1637_X_g_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.884681 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000296108 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.100412 0.100412 0.200824 0.401647 0.803294 1.60659 3.21318 6.42635 12.8527 25.7054 51.4108 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.884 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2987.7 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0650-1637_X_g_dfm.log closed on Wed Mar 4 21:32:31 2020