! Started logfile: /image_prod/ug002_uva//J0646-3903_S_dfm.log on Wed Mar  4 21:28:46 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0646-3903_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0646-3903_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.878704 visibilities/baseline/integration-bin.
! Found source: J0646-3903
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5694 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0646-3903_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.038463Jy  sigma=6.010280
! Fit after  self-cal, rms=0.810887Jy  sigma=4.567095
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.259 mas, bmaj=6.343 mas, bpa=-4.419 degrees
! Estimated noise=2.75174 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.145506 Jy
! Component: 100  -  total flux cleaned = 0.19823 Jy
! Total flux subtracted in 100 components = 0.19823 Jy
! Clean residual min=-0.015979 max=0.036795 Jy/beam
! Clean residual mean=0.000004 rms=0.004610 Jy/beam
! Combined flux in latest and established models = 0.19823 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.19823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113185Jy  sigma=0.610708
! Fit after  self-cal, rms=0.112955Jy  sigma=0.609778
! Inverting map 
! Added new window around map position (4.5, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0326953 Jy
! Component: 100  -  total flux cleaned = 0.0498005 Jy
! Total flux subtracted in 100 components = 0.0498005 Jy
! Clean residual min=-0.011104 max=0.019776 Jy/beam
! Clean residual mean=-0.000003 rms=0.003068 Jy/beam
! Combined flux in latest and established models = 0.24803 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 22 components and 0.24803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102620Jy  sigma=0.517670
! Fit after  self-cal, rms=0.101640Jy  sigma=0.512885
! Inverting map 
! Added new window around map position (3.5, -6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169818 Jy
! Component: 100  -  total flux cleaned = 0.0255757 Jy
! Total flux subtracted in 100 components = 0.0255757 Jy
! Clean residual min=-0.009737 max=0.013387 Jy/beam
! Clean residual mean=-0.000007 rms=0.002418 Jy/beam
! Combined flux in latest and established models = 0.273606 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 38 components and 0.273606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098809Jy  sigma=0.488708
! Fit after  self-cal, rms=0.098190Jy  sigma=0.485480
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=7.87 mas, bpa=-3.386 degrees
! Estimated noise=1.67508 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100013 Jy
! Component: 100  -  total flux cleaned = 0.0130857 Jy
! Component: 150  -  total flux cleaned = 0.0136697 Jy
! Component: 200  -  total flux cleaned = 0.0140636 Jy
! Total flux subtracted in 200 components = 0.0140636 Jy
! Clean residual min=-0.006874 max=0.010486 Jy/beam
! Clean residual mean=-0.000042 rms=0.002222 Jy/beam
! Combined flux in latest and established models = 0.28767 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 62 components and 0.28767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097192Jy  sigma=0.478073
! Fit after  self-cal, rms=0.096996Jy  sigma=0.476972
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.955 x 7.87 at -3.386 degrees (North through East)
! Clean map  min=-0.0066391  max=0.17759 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        1.56     KP        0.99     LA        1.00     
!   MK        0.97     NL        1.19     OV        0.98     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.56     KP        0.98     LA        0.98     
!   MK        1.02     NL        1.28     OV        0.98     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        1.70     KP        0.99     LA        0.97     
!   MK        0.99     NL        1.18     OV        0.98     PT        0.99     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.096996Jy  sigma=0.476972
! Fit after  self-cal, rms=0.117700Jy  sigma=0.461239
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.967 mas, bmaj=7.798 mas, bpa=-2.943 degrees
! Estimated noise=1.72124 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17, 54).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00688418 Jy
! Component: 100  -  total flux cleaned = 0.00774406 Jy
! Component: 150  -  total flux cleaned = 0.0076446 Jy
! Component: 200  -  total flux cleaned = 0.00772532 Jy
! Total flux subtracted in 200 components = 0.00772532 Jy
! Clean residual min=-0.004602 max=0.004715 Jy/beam
! Clean residual mean=-0.000016 rms=0.001192 Jy/beam
! Combined flux in latest and established models = 0.295395 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 94 components and 0.295395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117222Jy  sigma=0.458355
! Fit after  self-cal, rms=0.117684Jy  sigma=0.457764
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117684Jy  sigma=0.457764
! Fit after  self-cal, rms=0.116670Jy  sigma=0.454680
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.962 mas, bmaj=7.778 mas, bpa=-3.067 degrees
! Estimated noise=1.71231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124004 Jy
! Component: 100  -  total flux cleaned = 0.00141919 Jy
! Component: 150  -  total flux cleaned = 0.0015159 Jy
! Component: 200  -  total flux cleaned = 0.00151414 Jy
! Total flux subtracted in 200 components = 0.00151414 Jy
! Clean residual min=-0.003693 max=0.003445 Jy/beam
! Clean residual mean=-0.000004 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.296909 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 109 components and 0.296909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116604Jy  sigma=0.454356
! Fit after  self-cal, rms=0.116520Jy  sigma=0.454309
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000464597 Jy
! Component: 100  -  total flux cleaned = 0.00046529 Jy
! Component: 150  -  total flux cleaned = 0.00046532 Jy
! Component: 200  -  total flux cleaned = 0.000467222 Jy
! Total flux subtracted in 200 components = 0.000467222 Jy
! Clean residual min=-0.003605 max=0.003419 Jy/beam
! Clean residual mean=-0.000002 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.297376 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 116 components and 0.297376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116486Jy  sigma=0.454150
! Fit after  self-cal, rms=0.116477Jy  sigma=0.454144
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116477Jy  sigma=0.454144
! Fit after  self-cal, rms=0.116126Jy  sigma=0.453932
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.957 mas, bmaj=7.768 mas, bpa=-3.129 degrees
! Estimated noise=1.70618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.69485e-05 Jy
! Component: 100  -  total flux cleaned = -0.000175798 Jy
! Component: 150  -  total flux cleaned = -0.000247268 Jy
! Component: 200  -  total flux cleaned = -0.000246923 Jy
! Total flux subtracted in 200 components = -0.000246923 Jy
! Clean residual min=-0.003351 max=0.003044 Jy/beam
! Clean residual mean=0.000001 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.297129 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 125 components and 0.297129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116097Jy  sigma=0.453776
! Fit after  self-cal, rms=0.116066Jy  sigma=0.453769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.70148e-05 Jy
! Component: 100  -  total flux cleaned = 4.66662e-05 Jy
! Component: 150  -  total flux cleaned = 4.69333e-05 Jy
! Component: 200  -  total flux cleaned = 4.74706e-05 Jy
! Total flux subtracted in 200 components = 4.74706e-05 Jy
! Clean residual min=-0.003288 max=0.003004 Jy/beam
! Clean residual mean=0.000001 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.297177 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 130 components and 0.297177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116048Jy  sigma=0.453681
! Fit after  self-cal, rms=0.116046Jy  sigma=0.453679
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116046Jy  sigma=0.453679
! Fit after  self-cal, rms=0.116352Jy  sigma=0.453660
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.635 mas, bmaj=25.51 mas, bpa=1.436 degrees
! Estimated noise=2.1338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211299 Jy
! Component: 100  -  total flux cleaned = 0.000354449 Jy
! Component: 150  -  total flux cleaned = 0.000299569 Jy
! Component: 200  -  total flux cleaned = 0.000252356 Jy
! Total flux subtracted in 200 components = 0.000252356 Jy
! Clean residual min=-0.002770 max=0.002931 Jy/beam
! Clean residual mean=0.000006 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.297429 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 137 components and 0.297429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116347Jy  sigma=0.453641
! Fit after  self-cal, rms=0.116340Jy  sigma=0.453625
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.54042e-06 Jy
! Component: 100  -  total flux cleaned = -2.68933e-05 Jy
! Component: 150  -  total flux cleaned = -6.29759e-05 Jy
! Component: 200  -  total flux cleaned = -9.66821e-05 Jy
! Total flux subtracted in 200 components = -9.66821e-05 Jy
! Clean residual min=-0.002668 max=0.002871 Jy/beam
! Clean residual mean=0.000005 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.297333 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 138 components and 0.297333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116340Jy  sigma=0.453640
! Fit after  self-cal, rms=0.116340Jy  sigma=0.453635
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=7.761 mas, bpa=-3.16 degrees
! Estimated noise=1.70323 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.955 x 7.761 at -3.16 degrees (North through East)
! Clean map  min=-0.0031365  max=0.18087 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=6.243 mas, bpa=-4.065 degrees
! Estimated noise=2.77473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146386 Jy
! Component: 100  -  total flux cleaned = 0.203761 Jy
! Component: 150  -  total flux cleaned = 0.234021 Jy
! Component: 200  -  total flux cleaned = 0.251791 Jy
! Total flux subtracted in 200 components = 0.251791 Jy
! Clean residual min=-0.006905 max=0.009980 Jy/beam
! Clean residual mean=-0.000010 rms=0.001970 Jy/beam
! Combined flux in latest and established models = 0.251791 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.251791 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=7.761 mas, bpa=-3.16 degrees
! Estimated noise=1.70323 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166798 Jy
! Component: 100  -  total flux cleaned = 0.0262948 Jy
! Component: 150  -  total flux cleaned = 0.0325945 Jy
! Component: 200  -  total flux cleaned = 0.0369893 Jy
! Total flux subtracted in 200 components = 0.0369893 Jy
! Clean residual min=-0.003731 max=0.003331 Jy/beam
! Clean residual mean=-0.000013 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.28878 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 64 components and 0.28878 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.635 mas, bmaj=25.51 mas, bpa=1.436 degrees
! Estimated noise=2.1338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00448424 Jy
! Component: 100  -  total flux cleaned = 0.00674688 Jy
! Component: 150  -  total flux cleaned = 0.00796787 Jy
! Component: 200  -  total flux cleaned = 0.00813149 Jy
! Total flux subtracted in 200 components = 0.00813149 Jy
! Clean residual min=-0.002889 max=0.002711 Jy/beam
! Clean residual mean=0.000006 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.296912 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.25548e-05 Jy
! Component: 100  -  total flux cleaned = 0.000133683 Jy
! Component: 150  -  total flux cleaned = 0.000156451 Jy
! Component: 200  -  total flux cleaned = 0.000135028 Jy
! Total flux subtracted in 200 components = 0.000135028 Jy
! Clean residual min=-0.002800 max=0.002684 Jy/beam
! Clean residual mean=0.000006 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.297047 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 87 components and 0.297047 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=7.761 mas, bpa=-3.16 degrees
! Estimated noise=1.70323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.6183e-05 Jy
! Component: 100  -  total flux cleaned = -9.78476e-05 Jy
! Component: 150  -  total flux cleaned = -9.92817e-05 Jy
! Component: 200  -  total flux cleaned = -9.92191e-05 Jy
! Total flux subtracted in 200 components = -9.92191e-05 Jy
! Clean residual min=-0.003337 max=0.003222 Jy/beam
! Clean residual mean=0.000001 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.296947 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 103 components and 0.296947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116416Jy  sigma=0.453990
! Fit after  self-cal, rms=0.116453Jy  sigma=0.453907
wmodel J0646-3903_S_map.mod
! Writing 103 model components to file: J0646-3903_S_map.mod
wobs   J0646-3903_S_uvs.fits
! Writing UV FITS file: J0646-3903_S_uvs.fits
wwins  J0646-3903_S_map.win
! wwins: Wrote 4 windows to J0646-3903_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197958 Jy
! Component: 100  -  total flux cleaned = 0.000409069 Jy
! Component: 150  -  total flux cleaned = 0.000459347 Jy
! Component: 200  -  total flux cleaned = 0.000412138 Jy
! Component: 250  -  total flux cleaned = 0.000456368 Jy
! Component: 300  -  total flux cleaned = 0.000455759 Jy
! Component: 350  -  total flux cleaned = 0.000496413 Jy
! Component: 400  -  total flux cleaned = 0.000455502 Jy
! Component: 450  -  total flux cleaned = 0.000416212 Jy
! Component: 500  -  total flux cleaned = 0.000341055 Jy
! Component: 550  -  total flux cleaned = 0.000268092 Jy
! Component: 600  -  total flux cleaned = 0.000304495 Jy
! Component: 650  -  total flux cleaned = 0.000339401 Jy
! Component: 700  -  total flux cleaned = 0.000372295 Jy
! Component: 750  -  total flux cleaned = 0.000338177 Jy
! Component: 800  -  total flux cleaned = 0.000305938 Jy
! Component: 850  -  total flux cleaned = 0.000369159 Jy
! Component: 900  -  total flux cleaned = 0.000277641 Jy
! Component: 950  -  total flux cleaned = 0.000308629 Jy
! Component: 1000  -  total flux cleaned = 0.000278793 Jy
! Component: 1050  -  total flux cleaned = 0.000191657 Jy
! Component: 1100  -  total flux cleaned = 7.85356e-05 Jy
! Component: 1150  -  total flux cleaned = 2.36024e-05 Jy
! Component: 1200  -  total flux cleaned = -3.13746e-05 Jy
! Component: 1250  -  total flux cleaned = -0.000192934 Jy
! Component: 1300  -  total flux cleaned = -0.000351625 Jy
! Component: 1350  -  total flux cleaned = -0.000533577 Jy
! Component: 1400  -  total flux cleaned = -0.000584653 Jy
! Component: 1450  -  total flux cleaned = -0.000685479 Jy
! Component: 1500  -  total flux cleaned = -0.000760562 Jy
! Component: 1550  -  total flux cleaned = -0.000931997 Jy
! Component: 1600  -  total flux cleaned = -0.000955713 Jy
! Component: 1650  -  total flux cleaned = -0.00105112 Jy
! Component: 1700  -  total flux cleaned = -0.00112163 Jy
! Component: 1750  -  total flux cleaned = -0.00119127 Jy
! Component: 1800  -  total flux cleaned = -0.00116867 Jy
! Component: 1850  -  total flux cleaned = -0.0012594 Jy
! Component: 1900  -  total flux cleaned = -0.0012817 Jy
! Component: 1950  -  total flux cleaned = -0.00132596 Jy
! Component: 2000  -  total flux cleaned = -0.00143472 Jy
! Component: 2050  -  total flux cleaned = -0.00143424 Jy
! Component: 2100  -  total flux cleaned = -0.00147683 Jy
! Component: 2150  -  total flux cleaned = -0.0015189 Jy
! Component: 2200  -  total flux cleaned = -0.00156042 Jy
! Component: 2250  -  total flux cleaned = -0.0016625 Jy
! Component: 2300  -  total flux cleaned = -0.00168256 Jy
! Component: 2350  -  total flux cleaned = -0.001762 Jy
! Component: 2400  -  total flux cleaned = -0.00180141 Jy
! Component: 2450  -  total flux cleaned = -0.00182101 Jy
! Component: 2500  -  total flux cleaned = -0.00189816 Jy
! Component: 2550  -  total flux cleaned = -0.00186002 Jy
! Component: 2600  -  total flux cleaned = -0.00193567 Jy
! Component: 2650  -  total flux cleaned = -0.00201067 Jy
! Component: 2700  -  total flux cleaned = -0.00206635 Jy
! Component: 2750  -  total flux cleaned = -0.00208468 Jy
! Component: 2800  -  total flux cleaned = -0.00215748 Jy
! Component: 2850  -  total flux cleaned = -0.00224729 Jy
! Component: 2900  -  total flux cleaned = -0.00230065 Jy
! Component: 2950  -  total flux cleaned = -0.0023712 Jy
! Component: 3000  -  total flux cleaned = -0.00244123 Jy
! Component: 3050  -  total flux cleaned = -0.00254508 Jy
! Component: 3100  -  total flux cleaned = -0.00261351 Jy
! Component: 3150  -  total flux cleaned = -0.00271539 Jy
! Component: 3200  -  total flux cleaned = -0.00274894 Jy
! Component: 3250  -  total flux cleaned = -0.00284912 Jy
! Component: 3300  -  total flux cleaned = -0.00291535 Jy
! Component: 3350  -  total flux cleaned = -0.00299752 Jy
! Component: 3400  -  total flux cleaned = -0.00307897 Jy
! Component: 3450  -  total flux cleaned = -0.00317575 Jy
! Component: 3500  -  total flux cleaned = -0.00325593 Jy
! Component: 3550  -  total flux cleaned = -0.00335126 Jy
! Component: 3600  -  total flux cleaned = -0.00341423 Jy
! Component: 3650  -  total flux cleaned = -0.00344553 Jy
! Component: 3700  -  total flux cleaned = -0.00352328 Jy
! Component: 3750  -  total flux cleaned = -0.00360035 Jy
! Component: 3800  -  total flux cleaned = -0.0037072 Jy
! Component: 3850  -  total flux cleaned = -0.00378296 Jy
! Component: 3900  -  total flux cleaned = -0.00384324 Jy
! Component: 3950  -  total flux cleaned = -0.00390317 Jy
! Component: 4000  -  total flux cleaned = -0.00397742 Jy
! Component: 4050  -  total flux cleaned = -0.00403654 Jy
! Total flux subtracted in 4096 components = -0.00409516 Jy
! Clean residual min=-0.000892 max=0.000803 Jy/beam
! Clean residual mean=0.000000 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.292852 Jy
keep
! Adding 274 model components to the UV plane model.
! The established model now contains 377 components and 0.292852 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0646-3903_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.955 x 7.761 at -3.16 degrees (North through East)
! Clean map  min=-0.0022304  max=0.17871 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0646-3903_S_map.fits
wmodel /image_prod/ug002_uva//J0646-3903_S_map.mod
! Writing 377 model components to file: /image_prod/ug002_uva//J0646-3903_S_map.mod
wobs   /image_prod/ug002_uva//J0646-3903_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0646-3903_S_uvs.fits
wwins  /image_prod/ug002_uva//J0646-3903_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0646-3903_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.178714 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000249676 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.41912 0.41912 0.838241 1.67648 3.35296 6.70593 13.4119 26.8237 53.6474
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.178 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  715.784 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0646-3903_S_dfm.log closed on Wed Mar  4 21:28:50 2020