! Started logfile: /image_prod/ug002_uva//J0643-2451_S_dfm.log on Wed Mar 4 21:28:00 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0643-2451_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0643-2451_S_uva.fits ! AN table 1: 50 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.670714 visibilities/baseline/integration-bin. ! Found source: J0643-2451 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 2817 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0643-2451_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021143Jy sigma=5.962234 ! Fit after self-cal, rms=0.789437Jy sigma=4.549221 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.369 mas, bmaj=7.308 mas, bpa=-17.43 degrees ! Estimated noise=3.49717 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15348 Jy ! Component: 100 - total flux cleaned = 0.205693 Jy ! Total flux subtracted in 100 components = 0.205693 Jy ! Clean residual min=-0.016094 max=0.025671 Jy/beam ! Clean residual mean=0.000039 rms=0.005418 Jy/beam ! Combined flux in latest and established models = 0.205693 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.205693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104282Jy sigma=0.583623 ! Fit after self-cal, rms=0.104213Jy sigma=0.583185 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=8.278 mas, bpa=-16.95 degrees ! Estimated noise=2.35257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0399295 Jy ! Component: 100 - total flux cleaned = 0.0597751 Jy ! Component: 150 - total flux cleaned = 0.0706949 Jy ! Component: 200 - total flux cleaned = 0.0775339 Jy ! Total flux subtracted in 200 components = 0.0775339 Jy ! Clean residual min=-0.010780 max=0.015786 Jy/beam ! Clean residual mean=-0.000065 rms=0.003631 Jy/beam ! Combined flux in latest and established models = 0.283227 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.283227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090613Jy sigma=0.479842 ! Fit after self-cal, rms=0.090537Jy sigma=0.479264 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.869 x 8.278 at -16.95 degrees (North through East) ! Clean map min=-0.010531 max=0.21783 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 1.08 LA 0.96 MK 1.05 ! NL 0.99 OV 0.93 PT 0.92 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 HN 1.13 LA 0.95 MK 1.01 ! NL 1.02 OV 0.95 PT 0.91 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 HN 1.12 LA 0.94 MK 0.95 ! NL 0.97 OV 0.97 PT 0.96 SC 0.92 ! ! ! Fit before self-cal, rms=0.090537Jy sigma=0.479264 ! Fit after self-cal, rms=0.094220Jy sigma=0.457057 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=8.233 mas, bpa=-16.47 degrees ! Estimated noise=2.31138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151382 Jy ! Component: 100 - total flux cleaned = 0.0015928 Jy ! Component: 150 - total flux cleaned = 0.00165621 Jy ! Component: 200 - total flux cleaned = 0.00165557 Jy ! Total flux subtracted in 200 components = 0.00165557 Jy ! Clean residual min=-0.009283 max=0.009704 Jy/beam ! Clean residual mean=-0.000063 rms=0.002739 Jy/beam ! Combined flux in latest and established models = 0.284883 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.284883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094123Jy sigma=0.456353 ! Fit after self-cal, rms=0.094406Jy sigma=0.456125 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094406Jy sigma=0.456125 ! Fit after self-cal, rms=0.093341Jy sigma=0.433777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.871 mas, bmaj=8.172 mas, bpa=-16.37 degrees ! Estimated noise=2.31371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211899 Jy ! Component: 100 - total flux cleaned = 0.0023902 Jy ! Component: 150 - total flux cleaned = 0.00248644 Jy ! Component: 200 - total flux cleaned = 0.00261899 Jy ! Total flux subtracted in 200 components = 0.00261899 Jy ! Clean residual min=-0.005264 max=0.006572 Jy/beam ! Clean residual mean=0.000005 rms=0.001494 Jy/beam ! Combined flux in latest and established models = 0.287502 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.287502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093282Jy sigma=0.433264 ! Fit after self-cal, rms=0.093553Jy sigma=0.433079 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29.5, -75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464227 Jy ! Component: 100 - total flux cleaned = 0.00545133 Jy ! Component: 150 - total flux cleaned = 0.00612876 Jy ! Component: 200 - total flux cleaned = 0.00675039 Jy ! Total flux subtracted in 200 components = 0.00675039 Jy ! Clean residual min=-0.005017 max=0.004476 Jy/beam ! Clean residual mean=0.000005 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.294252 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 85 components and 0.294252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093072Jy sigma=0.431109 ! Fit after self-cal, rms=0.093073Jy sigma=0.430920 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093073Jy sigma=0.430920 ! Fit after self-cal, rms=0.093836Jy sigma=0.429383 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=8.161 mas, bpa=-16.33 degrees ! Estimated noise=2.30562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259893 Jy ! Component: 100 - total flux cleaned = 0.00378018 Jy ! Component: 150 - total flux cleaned = 0.00448232 Jy ! Component: 200 - total flux cleaned = 0.00485541 Jy ! Total flux subtracted in 200 components = 0.00485541 Jy ! Clean residual min=-0.004676 max=0.004266 Jy/beam ! Clean residual mean=0.000010 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.299107 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 101 components and 0.299107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093715Jy sigma=0.428823 ! Fit after self-cal, rms=0.093753Jy sigma=0.428768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757255 Jy ! Component: 100 - total flux cleaned = 0.000924038 Jy ! Component: 150 - total flux cleaned = 0.00111375 Jy ! Component: 200 - total flux cleaned = 0.00114886 Jy ! Total flux subtracted in 200 components = 0.00114886 Jy ! Clean residual min=-0.004446 max=0.004053 Jy/beam ! Clean residual mean=0.000009 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.300256 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 118 components and 0.300256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093713Jy sigma=0.428581 ! Fit after self-cal, rms=0.093722Jy sigma=0.428573 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093722Jy sigma=0.428573 ! Fit after self-cal, rms=0.093608Jy sigma=0.428411 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.536 mas, bmaj=15.82 mas, bpa=-8.154 degrees ! Estimated noise=3.16828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219914 Jy ! Component: 100 - total flux cleaned = 0.00314152 Jy ! Component: 150 - total flux cleaned = 0.00346606 Jy ! Component: 200 - total flux cleaned = 0.00364652 Jy ! Total flux subtracted in 200 components = 0.00364652 Jy ! Clean residual min=-0.005162 max=0.005217 Jy/beam ! Clean residual mean=0.000016 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.303903 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 128 components and 0.303903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093593Jy sigma=0.428296 ! Fit after self-cal, rms=0.093597Jy sigma=0.428211 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.53483e-05 Jy ! Component: 100 - total flux cleaned = 0.000237648 Jy ! Component: 150 - total flux cleaned = 0.000237745 Jy ! Component: 200 - total flux cleaned = 0.00023851 Jy ! Total flux subtracted in 200 components = 0.00023851 Jy ! Clean residual min=-0.005029 max=0.005333 Jy/beam ! Clean residual mean=0.000016 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.304141 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 0.304141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093585Jy sigma=0.428207 ! Fit after self-cal, rms=0.093584Jy sigma=0.428155 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=8.169 mas, bpa=-16.35 degrees ! Estimated noise=2.30571 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.873 x 8.169 at -16.35 degrees (North through East) ! Clean map min=-0.0041456 max=0.2146 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.378 mas, bmaj=7.184 mas, bpa=-16.77 degrees ! Estimated noise=3.4102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149274 Jy ! Component: 100 - total flux cleaned = 0.201017 Jy ! Component: 150 - total flux cleaned = 0.230617 Jy ! Component: 200 - total flux cleaned = 0.247912 Jy ! Total flux subtracted in 200 components = 0.247912 Jy ! Clean residual min=-0.008174 max=0.009723 Jy/beam ! Clean residual mean=0.000033 rms=0.002506 Jy/beam ! Combined flux in latest and established models = 0.247912 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.247912 Jy ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=8.169 mas, bpa=-16.35 degrees ! Estimated noise=2.30571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174073 Jy ! Component: 100 - total flux cleaned = 0.0273878 Jy ! Component: 150 - total flux cleaned = 0.0346319 Jy ! Component: 200 - total flux cleaned = 0.0399806 Jy ! Total flux subtracted in 200 components = 0.0399806 Jy ! Clean residual min=-0.005826 max=0.005362 Jy/beam ! Clean residual mean=0.000021 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.287892 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 50 components and 0.287892 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.536 mas, bmaj=15.82 mas, bpa=-8.154 degrees ! Estimated noise=3.16828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692543 Jy ! Component: 100 - total flux cleaned = 0.0108315 Jy ! Component: 150 - total flux cleaned = 0.0126229 Jy ! Component: 200 - total flux cleaned = 0.0138715 Jy ! Total flux subtracted in 200 components = 0.0138715 Jy ! Clean residual min=-0.005071 max=0.005612 Jy/beam ! Clean residual mean=0.000022 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.301764 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789386 Jy ! Component: 100 - total flux cleaned = 0.00109373 Jy ! Component: 150 - total flux cleaned = 0.00131851 Jy ! Component: 200 - total flux cleaned = 0.00148268 Jy ! Total flux subtracted in 200 components = 0.00148268 Jy ! Clean residual min=-0.005080 max=0.005407 Jy/beam ! Clean residual mean=0.000019 rms=0.001494 Jy/beam ! Combined flux in latest and established models = 0.303246 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 86 components and 0.303246 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=8.169 mas, bpa=-16.35 degrees ! Estimated noise=2.30571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000950222 Jy ! Component: 100 - total flux cleaned = -0.000866216 Jy ! Component: 150 - total flux cleaned = -0.000727442 Jy ! Component: 200 - total flux cleaned = -0.00060742 Jy ! Total flux subtracted in 200 components = -0.00060742 Jy ! Clean residual min=-0.004521 max=0.003950 Jy/beam ! Clean residual mean=0.000008 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.302639 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.302639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093676Jy sigma=0.428534 ! Fit after self-cal, rms=0.093652Jy sigma=0.428480 wmodel J0643-2451_S_map.mod ! Writing 102 model components to file: J0643-2451_S_map.mod wobs J0643-2451_S_uvs.fits ! Writing UV FITS file: J0643-2451_S_uvs.fits wwins J0643-2451_S_map.win ! wwins: Wrote 2 windows to J0643-2451_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011245 Jy ! Component: 100 - total flux cleaned = -0.00120099 Jy ! Component: 150 - total flux cleaned = -0.00132312 Jy ! Component: 200 - total flux cleaned = -0.00143895 Jy ! Component: 250 - total flux cleaned = -0.00165537 Jy ! Component: 300 - total flux cleaned = -0.00165454 Jy ! Component: 350 - total flux cleaned = -0.00180405 Jy ! Component: 400 - total flux cleaned = -0.0018515 Jy ! Component: 450 - total flux cleaned = -0.0018061 Jy ! Component: 500 - total flux cleaned = -0.00171927 Jy ! Component: 550 - total flux cleaned = -0.00176098 Jy ! Component: 600 - total flux cleaned = -0.00151725 Jy ! Component: 650 - total flux cleaned = -0.00120398 Jy ! Component: 700 - total flux cleaned = -0.00101327 Jy ! Component: 750 - total flux cleaned = -0.000789723 Jy ! Component: 800 - total flux cleaned = -0.000392577 Jy ! Component: 850 - total flux cleaned = -0.000285403 Jy ! Component: 900 - total flux cleaned = 9.36152e-05 Jy ! Component: 950 - total flux cleaned = 0.000328688 Jy ! Component: 1000 - total flux cleaned = 0.000624199 Jy ! Component: 1050 - total flux cleaned = 0.00100819 Jy ! Component: 1100 - total flux cleaned = 0.00135212 Jy ! Component: 1150 - total flux cleaned = 0.00162817 Jy ! Component: 1200 - total flux cleaned = 0.00186824 Jy ! Component: 1250 - total flux cleaned = 0.00210393 Jy ! Component: 1300 - total flux cleaned = 0.00242114 Jy ! Component: 1350 - total flux cleaned = 0.00270399 Jy ! Component: 1400 - total flux cleaned = 0.00278767 Jy ! Component: 1450 - total flux cleaned = 0.00308907 Jy ! Component: 1500 - total flux cleaned = 0.00325054 Jy ! Component: 1550 - total flux cleaned = 0.00346203 Jy ! Component: 1600 - total flux cleaned = 0.00377416 Jy ! Component: 1650 - total flux cleaned = 0.00395339 Jy ! Component: 1700 - total flux cleaned = 0.00425679 Jy ! Component: 1750 - total flux cleaned = 0.00453068 Jy ! Component: 1800 - total flux cleaned = 0.00475108 Jy ! Component: 1850 - total flux cleaned = 0.00496906 Jy ! Component: 1900 - total flux cleaned = 0.00523168 Jy ! Component: 1950 - total flux cleaned = 0.00537317 Jy ! Component: 2000 - total flux cleaned = 0.00553632 Jy ! Component: 2050 - total flux cleaned = 0.00562855 Jy ! Component: 2100 - total flux cleaned = 0.00576562 Jy ! Component: 2150 - total flux cleaned = 0.00594619 Jy ! Component: 2200 - total flux cleaned = 0.00608023 Jy ! Component: 2250 - total flux cleaned = 0.00619084 Jy ! Component: 2300 - total flux cleaned = 0.00630028 Jy ! Component: 2350 - total flux cleaned = 0.00645193 Jy ! Component: 2400 - total flux cleaned = 0.0065163 Jy ! Component: 2450 - total flux cleaned = 0.0066016 Jy ! Component: 2500 - total flux cleaned = 0.00674951 Jy ! Component: 2550 - total flux cleaned = 0.00685438 Jy ! Component: 2600 - total flux cleaned = 0.00697937 Jy ! Component: 2650 - total flux cleaned = 0.00708285 Jy ! Component: 2700 - total flux cleaned = 0.00724732 Jy ! Component: 2750 - total flux cleaned = 0.00739015 Jy ! Component: 2800 - total flux cleaned = 0.00757247 Jy ! Component: 2850 - total flux cleaned = 0.00775371 Jy ! Component: 2900 - total flux cleaned = 0.00789387 Jy ! Component: 2950 - total flux cleaned = 0.00805317 Jy ! Component: 3000 - total flux cleaned = 0.00817206 Jy ! Component: 3050 - total flux cleaned = 0.00825103 Jy ! Component: 3100 - total flux cleaned = 0.00827074 Jy ! Component: 3150 - total flux cleaned = 0.00834893 Jy ! Component: 3200 - total flux cleaned = 0.00834892 Jy ! Component: 3250 - total flux cleaned = 0.00834903 Jy ! Component: 3300 - total flux cleaned = 0.00840705 Jy ! Component: 3350 - total flux cleaned = 0.0083879 Jy ! Component: 3400 - total flux cleaned = 0.0084072 Jy ! Component: 3450 - total flux cleaned = 0.00848399 Jy ! Component: 3500 - total flux cleaned = 0.00844591 Jy ! Component: 3550 - total flux cleaned = 0.00848413 Jy ! Component: 3600 - total flux cleaned = 0.00852225 Jy ! Component: 3650 - total flux cleaned = 0.00850323 Jy ! Component: 3700 - total flux cleaned = 0.00852218 Jy ! Component: 3750 - total flux cleaned = 0.00854103 Jy ! Component: 3800 - total flux cleaned = 0.0085035 Jy ! Component: 3850 - total flux cleaned = 0.0085223 Jy ! Component: 3900 - total flux cleaned = 0.00854103 Jy ! Component: 3950 - total flux cleaned = 0.00855976 Jy ! Component: 4000 - total flux cleaned = 0.0085597 Jy ! Component: 4050 - total flux cleaned = 0.00859698 Jy ! Total flux subtracted in 4096 components = 0.00863429 Jy ! Clean residual min=-0.001063 max=0.001210 Jy/beam ! Clean residual mean=0.000004 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.311273 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 356 components and 0.311273 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0643-2451_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.873 x 8.169 at -16.35 degrees (North through East) ! Clean map min=-0.0029037 max=0.21344 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0643-2451_S_map.fits wmodel /image_prod/ug002_uva//J0643-2451_S_map.mod ! Writing 356 model components to file: /image_prod/ug002_uva//J0643-2451_S_map.mod wobs /image_prod/ug002_uva//J0643-2451_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0643-2451_S_uvs.fits wwins /image_prod/ug002_uva//J0643-2451_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0643-2451_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.213443 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000301512 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.423782 0.423782 0.847565 1.69513 3.39026 6.78052 13.561 27.1221 54.2441 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.213 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 707.91 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0643-2451_S_dfm.log closed on Wed Mar 4 21:28:03 2020