! Started logfile: /image_prod/ug002_uva//J0641+0947_S_dfm.log on Wed Mar  4 21:26:08 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0641+0947_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0641+0947_S_uva.fits
! AN table 1: 113 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.818584 visibilities/baseline/integration-bin.
! Found source: J0641+0947
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 1665 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0641+0947_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001426Jy  sigma=10.519951
! Fit after  self-cal, rms=0.935317Jy  sigma=9.826454
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=20.91 mas, bmaj=29.33 mas, bpa=24.1 degrees
! Estimated noise=1.91704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.042332 Jy
! Component: 100  -  total flux cleaned = 0.0425187 Jy
! Total flux subtracted in 100 components = 0.0425187 Jy
! Clean residual min=-0.008491 max=0.008467 Jy/beam
! Clean residual mean=0.000173 rms=0.004117 Jy/beam
! Combined flux in latest and established models = 0.0425187 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.0425187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058203Jy  sigma=0.571967
! Fit after  self-cal, rms=0.057930Jy  sigma=0.568879
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=22.96 mas, bmaj=28.8 mas, bpa=8.445 degrees
! Estimated noise=1.68501 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00298847 Jy
! Component: 100  -  total flux cleaned = -0.00300381 Jy
! Component: 150  -  total flux cleaned = -0.00687025 Jy
! Component: 200  -  total flux cleaned = -0.0114317 Jy
! Total flux subtracted in 200 components = -0.0114317 Jy
! Clean residual min=-0.008055 max=0.007999 Jy/beam
! Clean residual mean=0.000172 rms=0.004242 Jy/beam
! Combined flux in latest and established models = 0.031087 Jy
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 128 components and 0.031087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.044459Jy  sigma=0.447122
! Fit after  self-cal, rms=0.043671Jy  sigma=0.440332
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 22.96 x 28.8 at 8.445 degrees (North through East)
! Clean map  min=-0.022311  max=0.05484 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 108 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.14     KP        1.23     LA        0.79     PT        0.89     
! 
! 
! Correcting IF 2.
!  A total of 108 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        1.14     LA        0.80     PT        0.90     
! 
! 
! Correcting IF 3.
!  A total of 108 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        1.04     LA        0.82     PT        0.91     
! 
! 
! Fit before self-cal, rms=0.043671Jy  sigma=0.440332
! Fit after  self-cal, rms=0.037914Jy  sigma=0.412713
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=24.58 mas, bmaj=28.76 mas, bpa=1.741 degrees
! Estimated noise=1.72417 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223605 Jy
! Component: 100  -  total flux cleaned = 0.00320751 Jy
! Component: 150  -  total flux cleaned = 0.00405375 Jy
! Component: 200  -  total flux cleaned = 0.00472111 Jy
! Total flux subtracted in 200 components = 0.00472111 Jy
! Clean residual min=-0.000674 max=0.000677 Jy/beam
! Clean residual mean=0.000013 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.0358081 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 174 components and 0.0358081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037669Jy  sigma=0.410253
! Fit after  self-cal, rms=0.037753Jy  sigma=0.409646
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037753Jy  sigma=0.409646
! Fit after  self-cal, rms=0.037581Jy  sigma=0.408766
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.55 mas, bmaj=28.75 mas, bpa=2.037 degrees
! Estimated noise=1.7196 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.37767e-05 Jy
! Component: 100  -  total flux cleaned = 0.000142137 Jy
! Component: 150  -  total flux cleaned = 0.000183863 Jy
! Component: 200  -  total flux cleaned = 0.000230704 Jy
! Total flux subtracted in 200 components = 0.000230704 Jy
! Clean residual min=-0.000465 max=0.000470 Jy/beam
! Clean residual mean=0.000005 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0360388 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 232 components and 0.0360388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037563Jy  sigma=0.408620
! Fit after  self-cal, rms=0.037554Jy  sigma=0.408509
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000413719 Jy
! Component: 100  -  total flux cleaned = 0.000729807 Jy
! Component: 150  -  total flux cleaned = 0.000950927 Jy
! Component: 200  -  total flux cleaned = 0.00116093 Jy
! Total flux subtracted in 200 components = 0.00116093 Jy
! Clean residual min=-0.000217 max=0.000216 Jy/beam
! Clean residual mean=0.000005 rms=0.000085 Jy/beam
! Combined flux in latest and established models = 0.0371998 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 299 components and 0.0371998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037543Jy  sigma=0.408362
! Fit after  self-cal, rms=0.037533Jy  sigma=0.408349
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037533Jy  sigma=0.408349
! Fit after  self-cal, rms=0.037419Jy  sigma=0.408285
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.54 mas, bmaj=28.73 mas, bpa=2.439 degrees
! Estimated noise=1.71185 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158763 Jy
! Component: 100  -  total flux cleaned = 0.000353114 Jy
! Component: 150  -  total flux cleaned = 0.000407942 Jy
! Component: 200  -  total flux cleaned = 0.000354732 Jy
! Total flux subtracted in 200 components = 0.000354732 Jy
! Clean residual min=-0.000179 max=0.000179 Jy/beam
! Clean residual mean=0.000003 rms=0.000072 Jy/beam
! Combined flux in latest and established models = 0.0375545 Jy
selfcal
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 362 components and 0.0375545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037411Jy  sigma=0.408212
! Fit after  self-cal, rms=0.037412Jy  sigma=0.408201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.25439e-05 Jy
! Component: 100  -  total flux cleaned = 4.34477e-05 Jy
! Component: 150  -  total flux cleaned = 2.86715e-06 Jy
! Component: 200  -  total flux cleaned = -5.87531e-05 Jy
! Total flux subtracted in 200 components = -5.87531e-05 Jy
! Clean residual min=-0.000171 max=0.000172 Jy/beam
! Clean residual mean=0.000004 rms=0.000068 Jy/beam
! Combined flux in latest and established models = 0.0374958 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 411 components and 0.0374958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037407Jy  sigma=0.408152
! Fit after  self-cal, rms=0.037405Jy  sigma=0.408149
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037405Jy  sigma=0.408149
! Fit after  self-cal, rms=0.037345Jy  sigma=0.408137
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.78 mas, bmaj=28.8 mas, bpa=2.506 degrees
! Estimated noise=1.70649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170941 Jy
! Component: 100  -  total flux cleaned = 0.000300901 Jy
! Component: 150  -  total flux cleaned = 0.000341675 Jy
! Component: 200  -  total flux cleaned = 0.000341817 Jy
! Total flux subtracted in 200 components = 0.000341817 Jy
! Clean residual min=-0.000165 max=0.000167 Jy/beam
! Clean residual mean=0.000003 rms=0.000066 Jy/beam
! Combined flux in latest and established models = 0.0378376 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 481 components and 0.0378376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037338Jy  sigma=0.408091
! Fit after  self-cal, rms=0.037340Jy  sigma=0.408089
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.90295e-05 Jy
! Component: 100  -  total flux cleaned = 1.90543e-05 Jy
! Component: 150  -  total flux cleaned = -5.71806e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105381 Jy
! Total flux subtracted in 200 components = -0.000105381 Jy
! Clean residual min=-0.000165 max=0.000163 Jy/beam
! Clean residual mean=0.000003 rms=0.000064 Jy/beam
! Combined flux in latest and established models = 0.0377322 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 519 components and 0.0377322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037335Jy  sigma=0.408050
! Fit after  self-cal, rms=0.037335Jy  sigma=0.408048
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=24.54 mas, bmaj=28.72 mas, bpa=2.76 degrees
! Estimated noise=1.70772 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 24.54 x 28.72 at 2.76 degrees (North through East)
! Clean map  min=-0.01842  max=0.049477 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.67 mas, bmaj=28.02 mas, bpa=25.92 degrees
! Estimated noise=1.9051 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0342438 Jy
! Component: 100  -  total flux cleaned = 0.02205 Jy
! Component: 150  -  total flux cleaned = 0.0126132 Jy
! Component: 200  -  total flux cleaned = 0.00451753 Jy
! Total flux subtracted in 200 components = 0.00451753 Jy
! Clean residual min=-0.009192 max=0.009072 Jy/beam
! Clean residual mean=0.000061 rms=0.003328 Jy/beam
! Combined flux in latest and established models = 0.00451752 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 47 model components to the UV plane model.
! The established model now contains 47 components and 0.00451752 Jy
! Inverting map and beam 
! Estimated beam: bmin=24.54 mas, bmaj=28.72 mas, bpa=2.76 degrees
! Estimated noise=1.70772 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270896 Jy
! Component: 100  -  total flux cleaned = 0.0018949 Jy
! Component: 150  -  total flux cleaned = 0.00222877 Jy
! Component: 200  -  total flux cleaned = 0.00274229 Jy
! Total flux subtracted in 200 components = 0.00274229 Jy
! Clean residual min=-0.001869 max=0.001842 Jy/beam
! Clean residual mean=0.000052 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.00725982 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 157 components and 0.00725982 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.78 mas, bmaj=28.8 mas, bpa=2.506 degrees
! Estimated noise=1.70649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000452565 Jy
! Component: 100  -  total flux cleaned = 0.00111689 Jy
! Component: 150  -  total flux cleaned = 0.00164045 Jy
! Component: 200  -  total flux cleaned = 0.00192181 Jy
! Total flux subtracted in 200 components = 0.00192181 Jy
! Clean residual min=-0.000630 max=0.000626 Jy/beam
! Clean residual mean=0.000011 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.00918163 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021595 Jy
! Component: 100  -  total flux cleaned = 0.000215464 Jy
! Component: 150  -  total flux cleaned = 0.000315484 Jy
! Component: 200  -  total flux cleaned = 0.000417297 Jy
! Total flux subtracted in 200 components = 0.000417297 Jy
! Clean residual min=-0.000606 max=0.000611 Jy/beam
! Clean residual mean=0.000005 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.00959892 Jy
! Adding 168 model components to the UV plane model.
! The established model now contains 324 components and 0.00959892 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=24.54 mas, bmaj=28.72 mas, bpa=2.76 degrees
! Estimated noise=1.70772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000391105 Jy
! Component: 100  -  total flux cleaned = -0.000240132 Jy
! Component: 150  -  total flux cleaned = -1.27553e-05 Jy
! Component: 200  -  total flux cleaned = 0.000148786 Jy
! Total flux subtracted in 200 components = 0.000148786 Jy
! Clean residual min=-0.000261 max=0.000262 Jy/beam
! Clean residual mean=0.000005 rms=0.000104 Jy/beam
! Combined flux in latest and established models = 0.00974771 Jy
selfcal
! Performing phase self-cal
! Adding 75 model components to the UV plane model.
! The established model now contains 399 components and 0.00974771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.037382Jy  sigma=0.408534
! Fit after  self-cal, rms=0.037360Jy  sigma=0.408442
wmodel J0641+0947_S_map.mod
! Writing 399 model components to file: J0641+0947_S_map.mod
wobs   J0641+0947_S_uvs.fits
! Writing UV FITS file: J0641+0947_S_uvs.fits
wwins  J0641+0947_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /image_prod/ug002_uva//J0641+0947_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 24.54 x 28.72 at 2.76 degrees (North through East)
! Clean map  min=-0.021787  max=0.044227 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0641+0947_S_map.fits
wmodel /image_prod/ug002_uva//J0641+0947_S_map.mod
! Writing 399 model components to file: /image_prod/ug002_uva//J0641+0947_S_map.mod
wobs   /image_prod/ug002_uva//J0641+0947_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0641+0947_S_uvs.fits
wwins  /image_prod/ug002_uva//J0641+0947_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0442272 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.49755e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.644234 0.644234 1.28847 2.57693 5.15387 10.3077 20.6155 41.231 82.4619
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.044 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  465.669 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0641+0947_S_dfm.log closed on Wed Mar  4 21:26:10 2020