! Started logfile: /image_prod/ug002_uva//J0637+3322_S_dfm.log on Wed Mar 4 21:23:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0637+3322_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0637+3322_S_uva.fits ! AN table 1: 45 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.842857 visibilities/baseline/integration-bin. ! Found source: J0637+3322 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 36 lines of history. ! ! Reading 3186 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0637+3322_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004994Jy sigma=8.533422 ! Fit after self-cal, rms=0.951275Jy sigma=8.069734 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=6.267 mas, bpa=5.022 degrees ! Estimated noise=2.14595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0372159 Jy ! Component: 100 - total flux cleaned = 0.0480387 Jy ! Total flux subtracted in 100 components = 0.0480387 Jy ! Clean residual min=-0.004220 max=0.004510 Jy/beam ! Clean residual mean=-0.000002 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.0480387 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0480387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058538Jy sigma=0.440877 ! Fit after self-cal, rms=0.057180Jy sigma=0.429682 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=6.563 mas, bpa=5.242 degrees ! Estimated noise=1.52503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00658976 Jy ! Component: 100 - total flux cleaned = 0.00928752 Jy ! Component: 150 - total flux cleaned = 0.0104905 Jy ! Component: 200 - total flux cleaned = 0.0108424 Jy ! Total flux subtracted in 200 components = 0.0108424 Jy ! Clean residual min=-0.002368 max=0.002296 Jy/beam ! Clean residual mean=-0.000001 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0588811 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0588812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056533Jy sigma=0.422954 ! Fit after self-cal, rms=0.056535Jy sigma=0.422862 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.323 x 6.563 at 5.242 degrees (North through East) ! Clean map min=-0.0022992 max=0.051497 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.07 KP 0.98 ! MK 1.25 NL 1.03 OV 0.94 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.05 KP 1.03 ! MK 1.05 NL 1.06 OV 0.95 SC 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.96 KP 1.06 ! MK 1.06 NL 0.89 OV 0.98 SC 1.00 ! ! ! Fit before self-cal, rms=0.056535Jy sigma=0.422862 ! Fit after self-cal, rms=0.056230Jy sigma=0.421097 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=6.559 mas, bpa=6.203 degrees ! Estimated noise=1.53217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000326703 Jy ! Component: 100 - total flux cleaned = -0.000201023 Jy ! Component: 150 - total flux cleaned = -0.00019648 Jy ! Component: 200 - total flux cleaned = -0.000244828 Jy ! Total flux subtracted in 200 components = -0.000244828 Jy ! Clean residual min=-0.002267 max=0.002258 Jy/beam ! Clean residual mean=-0.000001 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0586363 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.0586363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056205Jy sigma=0.420908 ! Fit after self-cal, rms=0.056275Jy sigma=0.420734 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056275Jy sigma=0.420734 ! Fit after self-cal, rms=0.056228Jy sigma=0.418013 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=6.564 mas, bpa=5.894 degrees ! Estimated noise=1.52991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.15379e-07 Jy ! Component: 100 - total flux cleaned = 1.93194e-05 Jy ! Component: 150 - total flux cleaned = 6.02839e-06 Jy ! Component: 200 - total flux cleaned = -7.46906e-06 Jy ! Total flux subtracted in 200 components = -7.46906e-06 Jy ! Clean residual min=-0.002446 max=0.002002 Jy/beam ! Clean residual mean=-0.000001 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0586289 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.0586289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056213Jy sigma=0.417923 ! Fit after self-cal, rms=0.056266Jy sigma=0.417679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.83751e-05 Jy ! Component: 100 - total flux cleaned = -5.46838e-05 Jy ! Component: 150 - total flux cleaned = -7.84254e-05 Jy ! Component: 200 - total flux cleaned = -8.98555e-05 Jy ! Total flux subtracted in 200 components = -8.98555e-05 Jy ! Clean residual min=-0.002450 max=0.001964 Jy/beam ! Clean residual mean=-0.000001 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.058539 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.058539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056258Jy sigma=0.417628 ! Fit after self-cal, rms=0.056257Jy sigma=0.417615 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056257Jy sigma=0.417615 ! Fit after self-cal, rms=0.056274Jy sigma=0.417586 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=6.551 mas, bpa=5.97 degrees ! Estimated noise=1.52678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.10959e-05 Jy ! Component: 100 - total flux cleaned = 6.66991e-05 Jy ! Component: 150 - total flux cleaned = 5.49874e-05 Jy ! Component: 200 - total flux cleaned = 3.35018e-05 Jy ! Total flux subtracted in 200 components = 3.35018e-05 Jy ! Clean residual min=-0.002435 max=0.001934 Jy/beam ! Clean residual mean=-0.000001 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0585725 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.0585725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056268Jy sigma=0.417545 ! Fit after self-cal, rms=0.056274Jy sigma=0.417535 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.56805e-05 Jy ! Component: 100 - total flux cleaned = -3.63997e-05 Jy ! Component: 150 - total flux cleaned = -5.61277e-05 Jy ! Component: 200 - total flux cleaned = -6.54263e-05 Jy ! Total flux subtracted in 200 components = -6.54263e-05 Jy ! Clean residual min=-0.002436 max=0.001926 Jy/beam ! Clean residual mean=-0.000001 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0585071 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.0585071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056269Jy sigma=0.417507 ! Fit after self-cal, rms=0.056269Jy sigma=0.417503 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056269Jy sigma=0.417503 ! Fit after self-cal, rms=0.056179Jy sigma=0.417498 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.678 mas, bmaj=8.47 mas, bpa=0.1418 degrees ! Estimated noise=1.82323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.52567e-05 Jy ! Component: 100 - total flux cleaned = 9.78935e-05 Jy ! Component: 150 - total flux cleaned = 9.73351e-05 Jy ! Component: 200 - total flux cleaned = 0.000104993 Jy ! Total flux subtracted in 200 components = 0.000104993 Jy ! Clean residual min=-0.001900 max=0.001976 Jy/beam ! Clean residual mean=-0.000002 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0586121 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 59 components and 0.0586121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056179Jy sigma=0.417516 ! Fit after self-cal, rms=0.056179Jy sigma=0.417507 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.50284e-05 Jy ! Component: 100 - total flux cleaned = 1.41856e-05 Jy ! Component: 150 - total flux cleaned = 7.72978e-06 Jy ! Component: 200 - total flux cleaned = 7.87207e-06 Jy ! Total flux subtracted in 200 components = 7.87207e-06 Jy ! Clean residual min=-0.001897 max=0.001991 Jy/beam ! Clean residual mean=-0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0586199 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 61 components and 0.0586199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056180Jy sigma=0.417530 ! Fit after self-cal, rms=0.056180Jy sigma=0.417523 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=6.539 mas, bpa=6.078 degrees ! Estimated noise=1.52448 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.353 x 6.539 at 6.078 degrees (North through East) ! Clean map min=-0.0023425 max=0.051396 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=6.206 mas, bpa=5.652 degrees ! Estimated noise=2.16639 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0387015 Jy ! Component: 100 - total flux cleaned = 0.0496283 Jy ! Component: 150 - total flux cleaned = 0.0539643 Jy ! Component: 200 - total flux cleaned = 0.0553186 Jy ! Total flux subtracted in 200 components = 0.0553186 Jy ! Clean residual min=-0.003660 max=0.003203 Jy/beam ! Clean residual mean=-0.000001 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0553186 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0553186 Jy ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=6.539 mas, bpa=6.078 degrees ! Estimated noise=1.52448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239215 Jy ! Component: 100 - total flux cleaned = 0.00317429 Jy ! Component: 150 - total flux cleaned = 0.00333574 Jy ! Component: 200 - total flux cleaned = 0.00341081 Jy ! Total flux subtracted in 200 components = 0.00341081 Jy ! Clean residual min=-0.002322 max=0.001990 Jy/beam ! Clean residual mean=-0.000001 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0587294 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 0.0587295 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.678 mas, bmaj=8.47 mas, bpa=0.1418 degrees ! Estimated noise=1.82323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436785 Jy ! Component: 100 - total flux cleaned = 0.000479897 Jy ! Component: 150 - total flux cleaned = 0.000495673 Jy ! Component: 200 - total flux cleaned = 0.000482084 Jy ! Total flux subtracted in 200 components = 0.000482084 Jy ! Clean residual min=-0.001863 max=0.001879 Jy/beam ! Clean residual mean=-0.000002 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0592115 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03217e-05 Jy ! Component: 100 - total flux cleaned = 3.75687e-07 Jy ! Component: 150 - total flux cleaned = 8.69412e-07 Jy ! Component: 200 - total flux cleaned = -7.53402e-06 Jy ! Total flux subtracted in 200 components = -7.53402e-06 Jy ! Clean residual min=-0.001870 max=0.001871 Jy/beam ! Clean residual mean=-0.000002 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.059204 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 58 components and 0.059204 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=6.539 mas, bpa=6.078 degrees ! Estimated noise=1.52448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161276 Jy ! Component: 100 - total flux cleaned = -0.000264339 Jy ! Component: 150 - total flux cleaned = -0.000300028 Jy ! Component: 200 - total flux cleaned = -0.00029948 Jy ! Total flux subtracted in 200 components = -0.00029948 Jy ! Clean residual min=-0.002435 max=0.001909 Jy/beam ! Clean residual mean=-0.000001 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0589045 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.0589045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056136Jy sigma=0.417095 ! Fit after self-cal, rms=0.056122Jy sigma=0.417013 wmodel J0637+3322_S_map.mod ! Writing 73 model components to file: J0637+3322_S_map.mod wobs J0637+3322_S_uvs.fits ! Writing UV FITS file: J0637+3322_S_uvs.fits wwins J0637+3322_S_map.win ! wwins: Wrote 2 windows to J0637+3322_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000982546 Jy ! Component: 100 - total flux cleaned = -0.00164941 Jy ! Component: 150 - total flux cleaned = -0.00214283 Jy ! Component: 200 - total flux cleaned = -0.00239409 Jy ! Component: 250 - total flux cleaned = -0.00230409 Jy ! Component: 300 - total flux cleaned = -0.0021876 Jy ! Component: 350 - total flux cleaned = -0.00207413 Jy ! Component: 400 - total flux cleaned = -0.00199101 Jy ! Component: 450 - total flux cleaned = -0.00196447 Jy ! Component: 500 - total flux cleaned = -0.00188532 Jy ! Component: 550 - total flux cleaned = -0.00185996 Jy ! Component: 600 - total flux cleaned = -0.00178393 Jy ! Component: 650 - total flux cleaned = -0.00171017 Jy ! Component: 700 - total flux cleaned = -0.0016133 Jy ! Component: 750 - total flux cleaned = -0.00149486 Jy ! Component: 800 - total flux cleaned = -0.00142563 Jy ! Component: 850 - total flux cleaned = -0.00140258 Jy ! Component: 900 - total flux cleaned = -0.00131302 Jy ! Component: 950 - total flux cleaned = -0.00129149 Jy ! Component: 1000 - total flux cleaned = -0.00124847 Jy ! Component: 1050 - total flux cleaned = -0.00124859 Jy ! Component: 1100 - total flux cleaned = -0.00126941 Jy ! Component: 1150 - total flux cleaned = -0.00126919 Jy ! Component: 1200 - total flux cleaned = -0.00122807 Jy ! Component: 1250 - total flux cleaned = -0.00120797 Jy ! Component: 1300 - total flux cleaned = -0.00122772 Jy ! Component: 1350 - total flux cleaned = -0.00128582 Jy ! Component: 1400 - total flux cleaned = -0.00130487 Jy ! Component: 1450 - total flux cleaned = -0.00128599 Jy ! Component: 1500 - total flux cleaned = -0.00134229 Jy ! Component: 1550 - total flux cleaned = -0.00134245 Jy ! Component: 1600 - total flux cleaned = -0.00134264 Jy ! Component: 1650 - total flux cleaned = -0.00141488 Jy ! Component: 1700 - total flux cleaned = -0.0013973 Jy ! Component: 1750 - total flux cleaned = -0.00143235 Jy ! Component: 1800 - total flux cleaned = -0.00143222 Jy ! Component: 1850 - total flux cleaned = -0.00143256 Jy ! Component: 1900 - total flux cleaned = -0.00151776 Jy ! Component: 1950 - total flux cleaned = -0.00146716 Jy ! Component: 2000 - total flux cleaned = -0.00148372 Jy ! Component: 2050 - total flux cleaned = -0.0014181 Jy ! Component: 2100 - total flux cleaned = -0.00148348 Jy ! Component: 2150 - total flux cleaned = -0.00149948 Jy ! Component: 2200 - total flux cleaned = -0.0014832 Jy ! Component: 2250 - total flux cleaned = -0.00145164 Jy ! Component: 2300 - total flux cleaned = -0.00143584 Jy ! Component: 2350 - total flux cleaned = -0.00142013 Jy ! Component: 2400 - total flux cleaned = -0.00143507 Jy ! Component: 2450 - total flux cleaned = -0.00135925 Jy ! Component: 2500 - total flux cleaned = -0.00137437 Jy ! Component: 2550 - total flux cleaned = -0.00132948 Jy ! Component: 2600 - total flux cleaned = -0.00124106 Jy ! Component: 2650 - total flux cleaned = -0.00125567 Jy ! Component: 2700 - total flux cleaned = -0.0012412 Jy ! Component: 2750 - total flux cleaned = -0.00115529 Jy ! Component: 2800 - total flux cleaned = -0.00119783 Jy ! Component: 2850 - total flux cleaned = -0.00116958 Jy ! Component: 2900 - total flux cleaned = -0.00115557 Jy ! Component: 2950 - total flux cleaned = -0.00111387 Jy ! Component: 3000 - total flux cleaned = -0.00119642 Jy ! Component: 3050 - total flux cleaned = -0.00111448 Jy ! Component: 3100 - total flux cleaned = -0.00111453 Jy ! Component: 3150 - total flux cleaned = -0.00115505 Jy ! Component: 3200 - total flux cleaned = -0.00115511 Jy ! Component: 3250 - total flux cleaned = -0.00122127 Jy ! Component: 3300 - total flux cleaned = -0.00123433 Jy ! Component: 3350 - total flux cleaned = -0.00124715 Jy ! Component: 3400 - total flux cleaned = -0.00128601 Jy ! Component: 3450 - total flux cleaned = -0.00133732 Jy ! Component: 3500 - total flux cleaned = -0.00136276 Jy ! Component: 3550 - total flux cleaned = -0.00137545 Jy ! Component: 3600 - total flux cleaned = -0.00146346 Jy ! Component: 3650 - total flux cleaned = -0.00148831 Jy ! Component: 3700 - total flux cleaned = -0.00150074 Jy ! Component: 3750 - total flux cleaned = -0.00158719 Jy ! Component: 3800 - total flux cleaned = -0.0016116 Jy ! Component: 3850 - total flux cleaned = -0.00164818 Jy ! Component: 3900 - total flux cleaned = -0.00168449 Jy ! Component: 3950 - total flux cleaned = -0.00174474 Jy ! Component: 4000 - total flux cleaned = -0.00176852 Jy ! Component: 4050 - total flux cleaned = -0.00182796 Jy ! Total flux subtracted in 4096 components = -0.0018634 Jy ! Clean residual min=-0.000748 max=0.000761 Jy/beam ! Clean residual mean=-0.000001 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.0570411 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 323 components and 0.0570411 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0637+3322_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.353 x 6.539 at 6.078 degrees (North through East) ! Clean map min=-0.0019891 max=0.05142 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0637+3322_S_map.fits wmodel /image_prod/ug002_uva//J0637+3322_S_map.mod ! Writing 323 model components to file: /image_prod/ug002_uva//J0637+3322_S_map.mod wobs /image_prod/ug002_uva//J0637+3322_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0637+3322_S_uvs.fits wwins /image_prod/ug002_uva//J0637+3322_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0637+3322_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0514203 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201663 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17656 1.17656 2.35311 4.70623 9.41245 18.8249 37.6498 75.2996 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.051 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 254.981 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0637+3322_S_dfm.log closed on Wed Mar 4 21:23:41 2020