! Started logfile: /image_prod/ug002_uva//J0635-1821_S_dfm.log on Wed Mar 4 21:22:52 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0635-1821_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0635-1821_S_uva.fits ! AN table 1: 50 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.999444 visibilities/baseline/integration-bin. ! Found source: J0635-1821 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5397 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0635-1821_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.001803Jy sigma=7.246096 ! Fit after self-cal, rms=0.948860Jy sigma=6.849345 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=6.839 mas, bpa=-0.02521 degrees ! Estimated noise=1.92704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402049 Jy ! Component: 100 - total flux cleaned = 0.0510989 Jy ! Total flux subtracted in 100 components = 0.0510989 Jy ! Clean residual min=-0.004618 max=0.005255 Jy/beam ! Clean residual mean=-0.000022 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.0510989 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0510989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072114Jy sigma=0.471350 ! Fit after self-cal, rms=0.070985Jy sigma=0.464195 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=7.909 mas, bpa=-2.53 degrees ! Estimated noise=1.37608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00832379 Jy ! Component: 100 - total flux cleaned = 0.0120407 Jy ! Component: 150 - total flux cleaned = 0.0138803 Jy ! Component: 200 - total flux cleaned = 0.014837 Jy ! Total flux subtracted in 200 components = 0.014837 Jy ! Clean residual min=-0.003399 max=0.003194 Jy/beam ! Clean residual mean=-0.000010 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0659358 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 55 components and 0.0659358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070214Jy sigma=0.456513 ! Fit after self-cal, rms=0.070239Jy sigma=0.456254 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.356 x 7.909 at -2.53 degrees (North through East) ! Clean map min=-0.0033473 max=0.053697 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.99 KP 0.97 LA 1.01 ! MK 1.08 NL 1.03 OV 0.86 PT 1.03 ! SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 KP 0.99 LA 0.99 ! MK 0.96 NL 1.16 OV 0.86 PT 1.01 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 KP 1.03 LA 0.97 ! MK 1.01 NL 0.97 OV 0.89 PT 1.00 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.070239Jy sigma=0.456254 ! Fit after self-cal, rms=0.070920Jy sigma=0.454704 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=7.98 mas, bpa=-2.483 degrees ! Estimated noise=1.37289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.68745e-05 Jy ! Component: 100 - total flux cleaned = 4.02249e-05 Jy ! Component: 150 - total flux cleaned = 4.01875e-05 Jy ! Component: 200 - total flux cleaned = 2.79103e-05 Jy ! Total flux subtracted in 200 components = 2.79103e-05 Jy ! Clean residual min=-0.003005 max=0.002672 Jy/beam ! Clean residual mean=-0.000015 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0659637 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 59 components and 0.0659637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070913Jy sigma=0.454668 ! Fit after self-cal, rms=0.071000Jy sigma=0.454493 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071000Jy sigma=0.454493 ! Fit after self-cal, rms=0.071420Jy sigma=0.453510 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.379 mas, bmaj=7.961 mas, bpa=-2.339 degrees ! Estimated noise=1.37257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198104 Jy ! Component: 100 - total flux cleaned = 0.000171935 Jy ! Component: 150 - total flux cleaned = 0.000160574 Jy ! Component: 200 - total flux cleaned = 0.000160494 Jy ! Total flux subtracted in 200 components = 0.000160494 Jy ! Clean residual min=-0.002766 max=0.002661 Jy/beam ! Clean residual mean=-0.000006 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0661242 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.0661242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071414Jy sigma=0.453484 ! Fit after self-cal, rms=0.071463Jy sigma=0.453404 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.23027e-05 Jy ! Component: 100 - total flux cleaned = 2.05424e-05 Jy ! Component: 150 - total flux cleaned = 9.78193e-06 Jy ! Component: 200 - total flux cleaned = 9.38611e-07 Jy ! Total flux subtracted in 200 components = 9.38611e-07 Jy ! Clean residual min=-0.002742 max=0.002656 Jy/beam ! Clean residual mean=-0.000007 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0661252 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.0661252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071458Jy sigma=0.453388 ! Fit after self-cal, rms=0.071460Jy sigma=0.453383 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071460Jy sigma=0.453383 ! Fit after self-cal, rms=0.071368Jy sigma=0.453370 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=7.946 mas, bpa=-2.266 degrees ! Estimated noise=1.3693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181662 Jy ! Component: 100 - total flux cleaned = 0.000158302 Jy ! Component: 150 - total flux cleaned = 0.000147753 Jy ! Component: 200 - total flux cleaned = 0.000146927 Jy ! Total flux subtracted in 200 components = 0.000146927 Jy ! Clean residual min=-0.002712 max=0.002649 Jy/beam ! Clean residual mean=-0.000006 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0662721 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.0662721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071364Jy sigma=0.453350 ! Fit after self-cal, rms=0.071369Jy sigma=0.453345 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.91489e-06 Jy ! Component: 100 - total flux cleaned = -2.97637e-06 Jy ! Component: 150 - total flux cleaned = -2.93046e-06 Jy ! Component: 200 - total flux cleaned = -1.09744e-05 Jy ! Total flux subtracted in 200 components = -1.09744e-05 Jy ! Clean residual min=-0.002708 max=0.002654 Jy/beam ! Clean residual mean=-0.000006 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0662611 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 77 components and 0.0662611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071365Jy sigma=0.453334 ! Fit after self-cal, rms=0.071365Jy sigma=0.453331 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071365Jy sigma=0.453331 ! Fit after self-cal, rms=0.071144Jy sigma=0.453327 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.947 mas, bmaj=17.39 mas, bpa=-1.882 degrees ! Estimated noise=1.64956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276903 Jy ! Component: 100 - total flux cleaned = 0.000295662 Jy ! Component: 150 - total flux cleaned = 0.00031945 Jy ! Component: 200 - total flux cleaned = 0.000333565 Jy ! Total flux subtracted in 200 components = 0.000333565 Jy ! Clean residual min=-0.003364 max=0.002589 Jy/beam ! Clean residual mean=-0.000011 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0665947 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 81 components and 0.0665947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071144Jy sigma=0.453345 ! Fit after self-cal, rms=0.071145Jy sigma=0.453342 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.27333e-06 Jy ! Component: 100 - total flux cleaned = 1.31784e-05 Jy ! Component: 150 - total flux cleaned = 2.60419e-05 Jy ! Component: 200 - total flux cleaned = 3.82456e-05 Jy ! Total flux subtracted in 200 components = 3.82456e-05 Jy ! Clean residual min=-0.003367 max=0.002598 Jy/beam ! Clean residual mean=-0.000011 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.0666329 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 84 components and 0.0666329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071145Jy sigma=0.453354 ! Fit after self-cal, rms=0.071144Jy sigma=0.453351 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=7.932 mas, bpa=-2.223 degrees ! Estimated noise=1.36615 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.356 x 7.932 at -2.223 degrees (North through East) ! Clean map min=-0.0026537 max=0.052747 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=6.86 mas, bpa=0.1219 degrees ! Estimated noise=1.90343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400281 Jy ! Component: 100 - total flux cleaned = 0.0518819 Jy ! Component: 150 - total flux cleaned = 0.0579674 Jy ! Component: 200 - total flux cleaned = 0.0614049 Jy ! Total flux subtracted in 200 components = 0.0614049 Jy ! Clean residual min=-0.004007 max=0.003919 Jy/beam ! Clean residual mean=-0.000009 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.0614049 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0614049 Jy ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=7.932 mas, bpa=-2.223 degrees ! Estimated noise=1.36615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304435 Jy ! Component: 100 - total flux cleaned = 0.0041802 Jy ! Component: 150 - total flux cleaned = 0.00438433 Jy ! Component: 200 - total flux cleaned = 0.0044877 Jy ! Total flux subtracted in 200 components = 0.0044877 Jy ! Clean residual min=-0.002736 max=0.002607 Jy/beam ! Clean residual mean=-0.000007 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0658926 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.0658926 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.947 mas, bmaj=17.39 mas, bpa=-1.882 degrees ! Estimated noise=1.64956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054188 Jy ! Component: 100 - total flux cleaned = 0.000586477 Jy ! Component: 150 - total flux cleaned = 0.000614408 Jy ! Component: 200 - total flux cleaned = 0.000630608 Jy ! Total flux subtracted in 200 components = 0.000630608 Jy ! Clean residual min=-0.003382 max=0.002584 Jy/beam ! Clean residual mean=-0.000011 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.0665232 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.53271e-05 Jy ! Component: 100 - total flux cleaned = 2.92793e-05 Jy ! Component: 150 - total flux cleaned = 4.25671e-05 Jy ! Component: 200 - total flux cleaned = 5.48879e-05 Jy ! Total flux subtracted in 200 components = 5.48879e-05 Jy ! Clean residual min=-0.003374 max=0.002596 Jy/beam ! Clean residual mean=-0.000011 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0665781 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.0665781 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=7.932 mas, bpa=-2.223 degrees ! Estimated noise=1.36615 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205346 Jy ! Component: 100 - total flux cleaned = -0.00018828 Jy ! Component: 150 - total flux cleaned = -0.000199777 Jy ! Component: 200 - total flux cleaned = -0.000190713 Jy ! Total flux subtracted in 200 components = -0.000190713 Jy ! Clean residual min=-0.002704 max=0.002594 Jy/beam ! Clean residual mean=-0.000006 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0663874 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.0663874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071143Jy sigma=0.453346 ! Fit after self-cal, rms=0.071139Jy sigma=0.453328 wmodel J0635-1821_S_map.mod ! Writing 50 model components to file: J0635-1821_S_map.mod wobs J0635-1821_S_uvs.fits ! Writing UV FITS file: J0635-1821_S_uvs.fits wwins J0635-1821_S_map.win ! wwins: Wrote 1 windows to J0635-1821_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.67934e-05 Jy ! Component: 100 - total flux cleaned = -0.000350156 Jy ! Component: 150 - total flux cleaned = -0.000711489 Jy ! Component: 200 - total flux cleaned = -0.000938465 Jy ! Component: 250 - total flux cleaned = -0.00104693 Jy ! Component: 300 - total flux cleaned = -0.00111542 Jy ! Component: 350 - total flux cleaned = -0.00127867 Jy ! Component: 400 - total flux cleaned = -0.001468 Jy ! Component: 450 - total flux cleaned = -0.00161941 Jy ! Component: 500 - total flux cleaned = -0.0017665 Jy ! Component: 550 - total flux cleaned = -0.00193715 Jy ! Component: 600 - total flux cleaned = -0.00207465 Jy ! Component: 650 - total flux cleaned = -0.00223524 Jy ! Component: 700 - total flux cleaned = -0.0023919 Jy ! Component: 750 - total flux cleaned = -0.00254427 Jy ! Component: 800 - total flux cleaned = -0.00269292 Jy ! Component: 850 - total flux cleaned = -0.00278968 Jy ! Component: 900 - total flux cleaned = -0.00300276 Jy ! Component: 950 - total flux cleaned = -0.00311849 Jy ! Component: 1000 - total flux cleaned = -0.00323198 Jy ! Component: 1050 - total flux cleaned = -0.00336569 Jy ! Component: 1100 - total flux cleaned = -0.00347533 Jy ! Component: 1150 - total flux cleaned = -0.00358299 Jy ! Component: 1200 - total flux cleaned = -0.00368865 Jy ! Component: 1250 - total flux cleaned = -0.00375141 Jy ! Component: 1300 - total flux cleaned = -0.00387414 Jy ! Component: 1350 - total flux cleaned = -0.00397425 Jy ! Component: 1400 - total flux cleaned = -0.00399389 Jy ! Component: 1450 - total flux cleaned = -0.00407102 Jy ! Component: 1500 - total flux cleaned = -0.00407052 Jy ! Component: 1550 - total flux cleaned = -0.00408961 Jy ! Component: 1600 - total flux cleaned = -0.00412696 Jy ! Component: 1650 - total flux cleaned = -0.00412691 Jy ! Component: 1700 - total flux cleaned = -0.0041626 Jy ! Component: 1750 - total flux cleaned = -0.00412718 Jy ! Component: 1800 - total flux cleaned = -0.00411005 Jy ! Component: 1850 - total flux cleaned = -0.00419658 Jy ! Component: 1900 - total flux cleaned = -0.00419646 Jy ! Component: 1950 - total flux cleaned = -0.004264 Jy ! Component: 2000 - total flux cleaned = -0.00431362 Jy ! Component: 2050 - total flux cleaned = -0.00431332 Jy ! Component: 2100 - total flux cleaned = -0.00436197 Jy ! Component: 2150 - total flux cleaned = -0.00442618 Jy ! Component: 2200 - total flux cleaned = -0.00448977 Jy ! Component: 2250 - total flux cleaned = -0.00453677 Jy ! Component: 2300 - total flux cleaned = -0.00459863 Jy ! Component: 2350 - total flux cleaned = -0.0046905 Jy ! Component: 2400 - total flux cleaned = -0.00478112 Jy ! Component: 2450 - total flux cleaned = -0.00490073 Jy ! Component: 2500 - total flux cleaned = -0.00498958 Jy ! Component: 2550 - total flux cleaned = -0.00509254 Jy ! Component: 2600 - total flux cleaned = -0.00517967 Jy ! Component: 2650 - total flux cleaned = -0.00522304 Jy ! Component: 2700 - total flux cleaned = -0.0053228 Jy ! Component: 2750 - total flux cleaned = -0.00535092 Jy ! Component: 2800 - total flux cleaned = -0.00543477 Jy ! Component: 2850 - total flux cleaned = -0.00551803 Jy ! Component: 2900 - total flux cleaned = -0.00558679 Jy ! Component: 2950 - total flux cleaned = -0.00566842 Jy ! Component: 3000 - total flux cleaned = -0.0057628 Jy ! Component: 3050 - total flux cleaned = -0.00585634 Jy ! Component: 3100 - total flux cleaned = -0.00592251 Jy ! Component: 3150 - total flux cleaned = -0.00597502 Jy ! Component: 3200 - total flux cleaned = -0.00604008 Jy ! Component: 3250 - total flux cleaned = -0.00611773 Jy ! Component: 3300 - total flux cleaned = -0.00618184 Jy ! Component: 3350 - total flux cleaned = -0.00630879 Jy ! Component: 3400 - total flux cleaned = -0.00632125 Jy ! Component: 3450 - total flux cleaned = -0.00642136 Jy ! Component: 3500 - total flux cleaned = -0.00644604 Jy ! Component: 3550 - total flux cleaned = -0.00648308 Jy ! Component: 3600 - total flux cleaned = -0.00654434 Jy ! Component: 3650 - total flux cleaned = -0.00659305 Jy ! Component: 3700 - total flux cleaned = -0.00667737 Jy ! Component: 3750 - total flux cleaned = -0.00667739 Jy ! Component: 3800 - total flux cleaned = -0.00676061 Jy ! Component: 3850 - total flux cleaned = -0.0067841 Jy ! Component: 3900 - total flux cleaned = -0.00680768 Jy ! Component: 3950 - total flux cleaned = -0.00690094 Jy ! Component: 4000 - total flux cleaned = -0.00692406 Jy ! Component: 4050 - total flux cleaned = -0.00694702 Jy ! Total flux subtracted in 4096 components = -0.00703843 Jy ! Clean residual min=-0.000721 max=0.000726 Jy/beam ! Clean residual mean=-0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.059349 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 314 components and 0.059349 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0635-1821_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.356 x 7.932 at -2.223 degrees (North through East) ! Clean map min=-0.0016768 max=0.053035 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0635-1821_S_map.fits wmodel /image_prod/ug002_uva//J0635-1821_S_map.mod ! Writing 314 model components to file: /image_prod/ug002_uva//J0635-1821_S_map.mod wobs /image_prod/ug002_uva//J0635-1821_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0635-1821_S_uvs.fits wwins /image_prod/ug002_uva//J0635-1821_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0635-1821_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0530349 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000198073 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12043 1.12043 2.24086 4.48172 8.96344 17.9269 35.8538 71.7076 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.053 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 267.754 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0635-1821_S_dfm.log closed on Wed Mar 4 21:22:56 2020