! Started logfile: /image_prod/ug002_uva//J0632+1559_X_dfm.log on Wed Mar 4 21:21:49 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0632+1559_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0632+1559_X_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977481 visibilities/baseline/integration-bin. ! Found source: J0632+1559 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 39588 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0632+1559_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.059192Jy sigma=8.679340 ! Fit after self-cal, rms=0.703036Jy sigma=5.845657 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6856 mas, bmaj=1.598 mas, bpa=-3.389 degrees ! Estimated noise=0.897445 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.211105 Jy ! Component: 100 - total flux cleaned = 0.2791 Jy ! Total flux subtracted in 100 components = 0.2791 Jy ! Clean residual min=-0.014166 max=0.035805 Jy/beam ! Clean residual mean=0.000029 rms=0.003464 Jy/beam ! Combined flux in latest and established models = 0.2791 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.2791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136743Jy sigma=1.046032 ! Fit after self-cal, rms=0.136093Jy sigma=1.040651 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.035466 Jy ! Component: 100 - total flux cleaned = 0.054754 Jy ! Total flux subtracted in 100 components = 0.054754 Jy ! Clean residual min=-0.010812 max=0.034427 Jy/beam ! Clean residual mean=0.000017 rms=0.002942 Jy/beam ! Combined flux in latest and established models = 0.333854 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.333854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117733Jy sigma=0.907042 ! Fit after self-cal, rms=0.117421Jy sigma=0.904760 ! Inverting map ! Added new window around map position (-1.8, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327611 Jy ! Component: 100 - total flux cleaned = 0.0504001 Jy ! Total flux subtracted in 100 components = 0.0504001 Jy ! Clean residual min=-0.009254 max=0.026038 Jy/beam ! Clean residual mean=0.000009 rms=0.002371 Jy/beam ! Combined flux in latest and established models = 0.384254 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 34 components and 0.384254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100813Jy sigma=0.776675 ! Fit after self-cal, rms=0.100222Jy sigma=0.769130 ! Inverting map ! Added new window around map position (-4.8, -5.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250923 Jy ! Component: 100 - total flux cleaned = 0.0398772 Jy ! Total flux subtracted in 100 components = 0.0398772 Jy ! Clean residual min=-0.007955 max=0.010791 Jy/beam ! Clean residual mean=0.000010 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.424131 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 47 components and 0.424131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088330Jy sigma=0.674325 ! Fit after self-cal, rms=0.088010Jy sigma=0.671261 ! Inverting map ! Added new window around map position (0.8, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136069 Jy ! Component: 100 - total flux cleaned = 0.0247534 Jy ! Total flux subtracted in 100 components = 0.0247534 Jy ! Clean residual min=-0.007281 max=0.010335 Jy/beam ! Clean residual mean=0.000008 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.448885 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.448885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082452Jy sigma=0.629861 ! Fit after self-cal, rms=0.082370Jy sigma=0.629124 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8908 mas, bmaj=1.904 mas, bpa=-3.841 degrees ! Estimated noise=0.439268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.4, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236576 Jy ! Component: 100 - total flux cleaned = 0.0420984 Jy ! Component: 150 - total flux cleaned = 0.0571513 Jy ! Component: 200 - total flux cleaned = 0.0696766 Jy ! Total flux subtracted in 200 components = 0.0696766 Jy ! Clean residual min=-0.008033 max=0.011232 Jy/beam ! Clean residual mean=0.000017 rms=0.002042 Jy/beam ! Combined flux in latest and established models = 0.518561 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 119 components and 0.518561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070153Jy sigma=0.540663 ! Fit after self-cal, rms=0.069684Jy sigma=0.535833 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8908 x 1.904 at -3.841 degrees (North through East) ! Clean map min=-0.0073186 max=0.28706 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 1.02 KP 1.06 ! LA 1.00 MK 1.02 NL 1.10 OV 0.99 ! PT 0.86 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.93 HN 0.99 KP 1.04 ! LA 1.01 MK 1.00 NL 1.10 OV 0.97 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 1.00 KP 1.05 ! LA 0.98 MK 1.01 NL 1.09 OV 0.98 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.05 KP 1.03 ! LA 1.01 MK 1.02 NL 1.07 OV 0.98 ! PT 0.87 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.98 HN 0.98 KP 1.04 ! LA 0.97 MK 1.02 NL 1.10 OV 0.98 ! PT 0.86 SC 1.07 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 0.96 KP 1.03 ! LA 0.96 MK 1.01 NL 1.10 OV 0.99 ! PT 0.87 SC 1.08 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.97 KP 1.04 ! LA 0.97 MK 1.08 NL 1.12 OV 0.97 ! PT 0.85 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.98 KP 1.05 ! LA 0.99 MK 1.00 NL 1.09 OV 1.00 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.04 KP 1.01 ! LA 1.00 MK 1.01 NL 1.09 OV 0.96 ! PT 0.88 SC 1.09 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.01 KP 1.04 ! LA 0.97 MK 1.05 NL 1.09 OV 0.99 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.00 KP 1.04 ! LA 0.99 MK 1.02 NL 1.06 OV 0.97 ! PT 0.90 SC 1.09 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.93 HN 1.02 KP 1.02 ! LA 0.98 MK 1.08 NL 1.09 OV 0.99 ! PT 0.87 SC 1.06 ! ! ! Fit before self-cal, rms=0.069684Jy sigma=0.535833 ! Fit after self-cal, rms=0.059235Jy sigma=0.469600 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9071 mas, bmaj=1.922 mas, bpa=-3.88 degrees ! Estimated noise=0.43223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.2, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00945165 Jy ! Component: 100 - total flux cleaned = 0.0161742 Jy ! Component: 150 - total flux cleaned = 0.0214534 Jy ! Component: 200 - total flux cleaned = 0.0256877 Jy ! Total flux subtracted in 200 components = 0.0256877 Jy ! Clean residual min=-0.002938 max=0.003188 Jy/beam ! Clean residual mean=-0.000001 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.544249 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 155 components and 0.544249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057164Jy sigma=0.451561 ! Fit after self-cal, rms=0.057091Jy sigma=0.450780 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057091Jy sigma=0.450780 ! Fit after self-cal, rms=0.056643Jy sigma=0.445823 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.905 mas, bmaj=1.92 mas, bpa=-3.875 degrees ! Estimated noise=0.432266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389077 Jy ! Component: 100 - total flux cleaned = 0.00618573 Jy ! Component: 150 - total flux cleaned = 0.00821231 Jy ! Component: 200 - total flux cleaned = 0.00960255 Jy ! Total flux subtracted in 200 components = 0.00960255 Jy ! Clean residual min=-0.001865 max=0.002192 Jy/beam ! Clean residual mean=0.000002 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.553852 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 183 components and 0.553852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056165Jy sigma=0.441723 ! Fit after self-cal, rms=0.056137Jy sigma=0.441521 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.2, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249481 Jy ! Component: 100 - total flux cleaned = 0.00346195 Jy ! Component: 150 - total flux cleaned = 0.00438377 Jy ! Component: 200 - total flux cleaned = 0.00521538 Jy ! Total flux subtracted in 200 components = 0.00521538 Jy ! Clean residual min=-0.001681 max=0.001794 Jy/beam ! Clean residual mean=0.000001 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.559067 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 211 components and 0.559067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055943Jy sigma=0.439903 ! Fit after self-cal, rms=0.055933Jy sigma=0.439837 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055933Jy sigma=0.439837 ! Fit after self-cal, rms=0.055906Jy sigma=0.439469 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9043 mas, bmaj=1.92 mas, bpa=-3.934 degrees ! Estimated noise=0.432286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138226 Jy ! Component: 100 - total flux cleaned = 0.00216275 Jy ! Component: 150 - total flux cleaned = 0.00285269 Jy ! Component: 200 - total flux cleaned = 0.00352328 Jy ! Total flux subtracted in 200 components = 0.00352328 Jy ! Clean residual min=-0.001483 max=0.001639 Jy/beam ! Clean residual mean=0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.56259 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 234 components and 0.56259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055780Jy sigma=0.438426 ! Fit after self-cal, rms=0.055772Jy sigma=0.438368 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.8, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149676 Jy ! Component: 100 - total flux cleaned = 0.00219523 Jy ! Component: 150 - total flux cleaned = 0.00269276 Jy ! Component: 200 - total flux cleaned = 0.003235 Jy ! Total flux subtracted in 200 components = 0.003235 Jy ! Clean residual min=-0.001401 max=0.001529 Jy/beam ! Clean residual mean=0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.565825 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 253 components and 0.565825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055692Jy sigma=0.437692 ! Fit after self-cal, rms=0.055687Jy sigma=0.437660 ! Inverting map ! Added new window around map position (-8, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141591 Jy ! Component: 100 - total flux cleaned = 0.00214537 Jy ! Component: 150 - total flux cleaned = 0.00277035 Jy ! Component: 200 - total flux cleaned = 0.00328023 Jy ! Total flux subtracted in 200 components = 0.00328023 Jy ! Clean residual min=-0.001334 max=0.001507 Jy/beam ! Clean residual mean=0.000001 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.569106 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 269 components and 0.569106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055624Jy sigma=0.437114 ! Fit after self-cal, rms=0.055621Jy sigma=0.437091 ! Inverting map ! Added new window around map position (-5.6, -22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704002 Jy ! Component: 100 - total flux cleaned = 0.0010883 Jy ! Component: 150 - total flux cleaned = 0.00137397 Jy ! Component: 200 - total flux cleaned = 0.00174287 Jy ! Total flux subtracted in 200 components = 0.00174287 Jy ! Clean residual min=-0.001272 max=0.001335 Jy/beam ! Clean residual mean=0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.570849 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 283 components and 0.570849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055569Jy sigma=0.436646 ! Fit after self-cal, rms=0.055567Jy sigma=0.436635 ! Inverting map ! Added new window around map position (8.8, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.71192e-05 Jy ! Component: 100 - total flux cleaned = -0.000309717 Jy ! Component: 150 - total flux cleaned = -7.27684e-05 Jy ! Component: 200 - total flux cleaned = 0.00020923 Jy ! Total flux subtracted in 200 components = 0.00020923 Jy ! Clean residual min=-0.001239 max=0.001243 Jy/beam ! Clean residual mean=0.000001 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.571058 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 296 components and 0.571058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055512Jy sigma=0.436205 ! Fit after self-cal, rms=0.055510Jy sigma=0.436194 ! Inverting map ! Added new window around map position (10, 24.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000878587 Jy ! Component: 100 - total flux cleaned = 0.00108742 Jy ! Component: 150 - total flux cleaned = 0.0014226 Jy ! Component: 200 - total flux cleaned = 0.00166009 Jy ! Total flux subtracted in 200 components = 0.00166009 Jy ! Clean residual min=-0.001194 max=0.001150 Jy/beam ! Clean residual mean=0.000001 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.572718 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 308 components and 0.572718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055476Jy sigma=0.435922 ! Fit after self-cal, rms=0.055475Jy sigma=0.435914 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055475Jy sigma=0.435914 ! Fit after self-cal, rms=0.055411Jy sigma=0.435756 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.098 mas, bmaj=2.865 mas, bpa=-3.654 degrees ! Estimated noise=0.54849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120528 Jy ! Component: 100 - total flux cleaned = 0.00201569 Jy ! Component: 150 - total flux cleaned = 0.00249994 Jy ! Component: 200 - total flux cleaned = 0.00275494 Jy ! Total flux subtracted in 200 components = 0.00275494 Jy ! Clean residual min=-0.001359 max=0.001283 Jy/beam ! Clean residual mean=0.000003 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.575473 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 339 components and 0.575473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055392Jy sigma=0.435595 ! Fit after self-cal, rms=0.055390Jy sigma=0.435580 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558768 Jy ! Component: 100 - total flux cleaned = 0.000811471 Jy ! Component: 150 - total flux cleaned = 0.000979781 Jy ! Component: 200 - total flux cleaned = 0.00107721 Jy ! Total flux subtracted in 200 components = 0.00107721 Jy ! Clean residual min=-0.001274 max=0.001192 Jy/beam ! Clean residual mean=0.000003 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.57655 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 350 components and 0.57655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055383Jy sigma=0.435523 ! Fit after self-cal, rms=0.055383Jy sigma=0.435518 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9036 mas, bmaj=1.92 mas, bpa=-3.97 degrees ! Estimated noise=0.432018 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9036 x 1.92 at -3.97 degrees (North through East) ! Clean map min=-0.0010287 max=0.28022 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6925 mas, bmaj=1.608 mas, bpa=-3.522 degrees ! Estimated noise=0.894927 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209435 Jy ! Component: 100 - total flux cleaned = 0.284275 Jy ! Component: 150 - total flux cleaned = 0.327405 Jy ! Component: 200 - total flux cleaned = 0.357196 Jy ! Total flux subtracted in 200 components = 0.357196 Jy ! Clean residual min=-0.007370 max=0.016855 Jy/beam ! Clean residual mean=0.000016 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.357196 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.357196 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9036 mas, bmaj=1.92 mas, bpa=-3.97 degrees ! Estimated noise=0.432018 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402368 Jy ! Component: 100 - total flux cleaned = 0.0697435 Jy ! Component: 150 - total flux cleaned = 0.0923758 Jy ! Component: 200 - total flux cleaned = 0.110152 Jy ! Total flux subtracted in 200 components = 0.110152 Jy ! Clean residual min=-0.005929 max=0.010505 Jy/beam ! Clean residual mean=0.000021 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 0.467348 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 73 components and 0.467348 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142241 Jy ! Component: 100 - total flux cleaned = 0.0258628 Jy ! Component: 150 - total flux cleaned = 0.0355164 Jy ! Component: 200 - total flux cleaned = 0.0436241 Jy ! Total flux subtracted in 200 components = 0.0436241 Jy ! Clean residual min=-0.003650 max=0.004962 Jy/beam ! Clean residual mean=0.000011 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.510972 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 121 components and 0.510972 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00691525 Jy ! Component: 100 - total flux cleaned = 0.0128848 Jy ! Component: 150 - total flux cleaned = 0.0180689 Jy ! Component: 200 - total flux cleaned = 0.0225993 Jy ! Total flux subtracted in 200 components = 0.0225993 Jy ! Clean residual min=-0.002476 max=0.002886 Jy/beam ! Clean residual mean=0.000007 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.533571 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 154 components and 0.533572 Jy ! Inverting map ! Added new window around map position (-1, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397535 Jy ! Component: 100 - total flux cleaned = 0.00747355 Jy ! Component: 150 - total flux cleaned = 0.0105804 Jy ! Component: 200 - total flux cleaned = 0.0133545 Jy ! Total flux subtracted in 200 components = 0.0133545 Jy ! Clean residual min=-0.001901 max=0.001847 Jy/beam ! Clean residual mean=0.000005 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.546926 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 189 components and 0.546926 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.098 mas, bmaj=2.865 mas, bpa=-3.654 degrees ! Estimated noise=0.54849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457615 Jy ! Component: 100 - total flux cleaned = 0.00800094 Jy ! Component: 150 - total flux cleaned = 0.0107839 Jy ! Component: 200 - total flux cleaned = 0.0131503 Jy ! Total flux subtracted in 200 components = 0.0131503 Jy ! Clean residual min=-0.001941 max=0.001873 Jy/beam ! Clean residual mean=0.000008 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.560077 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204404 Jy ! Component: 100 - total flux cleaned = 0.00383858 Jy ! Component: 150 - total flux cleaned = 0.00542935 Jy ! Component: 200 - total flux cleaned = 0.00684521 Jy ! Total flux subtracted in 200 components = 0.00684521 Jy ! Clean residual min=-0.001637 max=0.001560 Jy/beam ! Clean residual mean=0.000006 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.566922 Jy ! Adding 120 model components to the UV plane model. ! The established model now contains 281 components and 0.566922 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9036 mas, bmaj=1.92 mas, bpa=-3.97 degrees ! Estimated noise=0.432018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135499 Jy ! Component: 100 - total flux cleaned = 0.00198896 Jy ! Component: 150 - total flux cleaned = 0.00265486 Jy ! Component: 200 - total flux cleaned = 0.00318466 Jy ! Total flux subtracted in 200 components = 0.00318466 Jy ! Clean residual min=-0.001244 max=0.001229 Jy/beam ! Clean residual mean=0.000002 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.570106 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 315 components and 0.570106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055444Jy sigma=0.436146 ! Fit after self-cal, rms=0.055419Jy sigma=0.435934 wmodel J0632+1559_X_map.mod ! Writing 315 model components to file: J0632+1559_X_map.mod wobs J0632+1559_X_uvs.fits ! Writing UV FITS file: J0632+1559_X_uvs.fits wwins J0632+1559_X_map.win ! wwins: Wrote 13 windows to J0632+1559_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.27168e-05 Jy ! Component: 100 - total flux cleaned = -8.74678e-06 Jy ! Component: 150 - total flux cleaned = -6.6279e-05 Jy ! Component: 200 - total flux cleaned = -0.000103373 Jy ! Component: 250 - total flux cleaned = -0.00019358 Jy ! Component: 300 - total flux cleaned = -0.00026354 Jy ! Component: 350 - total flux cleaned = -0.000314649 Jy ! Component: 400 - total flux cleaned = -0.000364638 Jy ! Component: 450 - total flux cleaned = -0.000348231 Jy ! Component: 500 - total flux cleaned = -0.000428799 Jy ! Component: 550 - total flux cleaned = -0.00039716 Jy ! Component: 600 - total flux cleaned = -0.000413123 Jy ! Component: 650 - total flux cleaned = -0.000428529 Jy ! Component: 700 - total flux cleaned = -0.000443613 Jy ! Component: 750 - total flux cleaned = -0.000502977 Jy ! Component: 800 - total flux cleaned = -0.000532223 Jy ! Component: 850 - total flux cleaned = -0.000561109 Jy ! Component: 900 - total flux cleaned = -0.000561237 Jy ! Component: 950 - total flux cleaned = -0.000631227 Jy ! Component: 1000 - total flux cleaned = -0.000644929 Jy ! Component: 1050 - total flux cleaned = -0.000617692 Jy ! Component: 1100 - total flux cleaned = -0.000644734 Jy ! Component: 1150 - total flux cleaned = -0.000658092 Jy ! Component: 1200 - total flux cleaned = -0.000657961 Jy ! Component: 1250 - total flux cleaned = -0.000632077 Jy ! Component: 1300 - total flux cleaned = -0.000683898 Jy ! Component: 1350 - total flux cleaned = -0.000645606 Jy ! Component: 1400 - total flux cleaned = -0.000670946 Jy ! Component: 1450 - total flux cleaned = -0.000683177 Jy ! Component: 1500 - total flux cleaned = -0.000695595 Jy ! Component: 1550 - total flux cleaned = -0.000756638 Jy ! Component: 1600 - total flux cleaned = -0.000744393 Jy ! Component: 1650 - total flux cleaned = -0.000684585 Jy ! Component: 1700 - total flux cleaned = -0.000744146 Jy ! Component: 1750 - total flux cleaned = -0.000744233 Jy ! Component: 1800 - total flux cleaned = -0.000790702 Jy ! Component: 1850 - total flux cleaned = -0.000744805 Jy ! Component: 1900 - total flux cleaned = -0.000778989 Jy ! Component: 1950 - total flux cleaned = -0.000756241 Jy ! Component: 2000 - total flux cleaned = -0.00076731 Jy ! Component: 2050 - total flux cleaned = -0.000700651 Jy ! Component: 2100 - total flux cleaned = -0.00073383 Jy ! Component: 2150 - total flux cleaned = -0.000733716 Jy ! Component: 2200 - total flux cleaned = -0.000701125 Jy ! Component: 2250 - total flux cleaned = -0.000711666 Jy ! Component: 2300 - total flux cleaned = -0.000700905 Jy ! Component: 2350 - total flux cleaned = -0.00069042 Jy ! Component: 2400 - total flux cleaned = -0.000700813 Jy ! Component: 2450 - total flux cleaned = -0.000659389 Jy ! Component: 2500 - total flux cleaned = -0.000628719 Jy ! Component: 2550 - total flux cleaned = -0.000669399 Jy ! Component: 2600 - total flux cleaned = -0.000608919 Jy ! Component: 2650 - total flux cleaned = -0.000638894 Jy ! Component: 2700 - total flux cleaned = -0.000609103 Jy ! Component: 2750 - total flux cleaned = -0.000638719 Jy ! Component: 2800 - total flux cleaned = -0.00061927 Jy ! Component: 2850 - total flux cleaned = -0.000648309 Jy ! Component: 2900 - total flux cleaned = -0.000657991 Jy ! Component: 2950 - total flux cleaned = -0.000629235 Jy ! Component: 3000 - total flux cleaned = -0.00062933 Jy ! Component: 3050 - total flux cleaned = -0.000591638 Jy ! Component: 3100 - total flux cleaned = -0.000619681 Jy ! Component: 3150 - total flux cleaned = -0.000573268 Jy ! Component: 3200 - total flux cleaned = -0.000600855 Jy ! Component: 3250 - total flux cleaned = -0.000591694 Jy ! Component: 3300 - total flux cleaned = -0.000619042 Jy ! Component: 3350 - total flux cleaned = -0.000583076 Jy ! Component: 3400 - total flux cleaned = -0.000601061 Jy ! Component: 3450 - total flux cleaned = -0.000636622 Jy ! Component: 3500 - total flux cleaned = -0.000592389 Jy ! Component: 3550 - total flux cleaned = -0.000592422 Jy ! Component: 3600 - total flux cleaned = -0.000636017 Jy ! Component: 3650 - total flux cleaned = -0.000627315 Jy ! Component: 3700 - total flux cleaned = -0.000618758 Jy ! Component: 3750 - total flux cleaned = -0.000644383 Jy ! Component: 3800 - total flux cleaned = -0.000644363 Jy ! Component: 3850 - total flux cleaned = -0.00061911 Jy ! Component: 3900 - total flux cleaned = -0.000627541 Jy ! Component: 3950 - total flux cleaned = -0.000660859 Jy ! Component: 4000 - total flux cleaned = -0.000594502 Jy ! Component: 4050 - total flux cleaned = -0.000619222 Jy ! Total flux subtracted in 4096 components = -0.000627365 Jy ! Clean residual min=-0.000448 max=0.000517 Jy/beam ! Clean residual mean=0.000001 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.569479 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 640 components and 0.569479 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0632+1559_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9036 x 1.92 at -3.97 degrees (North through East) ! Clean map min=-0.00075417 max=0.27985 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0632+1559_X_map.fits wmodel /image_prod/ug002_uva//J0632+1559_X_map.mod ! Writing 640 model components to file: /image_prod/ug002_uva//J0632+1559_X_map.mod wobs /image_prod/ug002_uva//J0632+1559_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0632+1559_X_uvs.fits wwins /image_prod/ug002_uva//J0632+1559_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J0632+1559_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.279853 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141988 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.152211 0.152211 0.304421 0.608842 1.21768 2.43537 4.87074 9.74147 19.4829 38.9659 77.9318 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.279 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1970.95 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0632+1559_X_dfm.log closed on Wed Mar 4 21:21:56 2020