! Started logfile: /image_prod/ug002_uva//J0629-0505_S_dfm.log on Wed Mar 4 21:20:14 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0629-0505_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0629-0505_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.994444 visibilities/baseline/integration-bin. ! Found source: J0629-0505 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 6444 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0629-0505_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.011476Jy sigma=7.781203 ! Fit after self-cal, rms=0.903424Jy sigma=6.953921 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.581 mas, bmaj=6.979 mas, bpa=-2.278 degrees ! Estimated noise=1.66751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0765757 Jy ! Component: 100 - total flux cleaned = 0.0932774 Jy ! Total flux subtracted in 100 components = 0.0932774 Jy ! Clean residual min=-0.004735 max=0.004703 Jy/beam ! Clean residual mean=-0.000005 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.0932774 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0932774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069958Jy sigma=0.470193 ! Fit after self-cal, rms=0.069942Jy sigma=0.470135 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=8.117 mas, bpa=-2.242 degrees ! Estimated noise=1.18425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465947 Jy ! Component: 100 - total flux cleaned = 0.00509405 Jy ! Component: 150 - total flux cleaned = 0.00525678 Jy ! Component: 200 - total flux cleaned = 0.00525731 Jy ! Total flux subtracted in 200 components = 0.00525731 Jy ! Clean residual min=-0.003607 max=0.003234 Jy/beam ! Clean residual mean=-0.000004 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.0985347 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0985347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069627Jy sigma=0.467694 ! Fit after self-cal, rms=0.069609Jy sigma=0.467660 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 8.117 at -2.242 degrees (North through East) ! Clean map min=-0.0034507 max=0.098943 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 1.02 KP 0.98 ! LA 1.04 MK 1.05 OV 0.81 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 0.94 KP 1.05 ! LA 1.05 MK 1.02 OV 0.88 PT 1.04 ! SC 0.86 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 1.01 KP 1.03 ! LA 1.00 MK 0.96 OV 0.92 PT 1.05 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.069609Jy sigma=0.467660 ! Fit after self-cal, rms=0.069011Jy sigma=0.462026 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=8.092 mas, bpa=-1.758 degrees ! Estimated noise=1.18183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000563189 Jy ! Component: 100 - total flux cleaned = 0.000565764 Jy ! Component: 150 - total flux cleaned = 0.000567979 Jy ! Component: 200 - total flux cleaned = 0.000568869 Jy ! Total flux subtracted in 200 components = 0.000568869 Jy ! Clean residual min=-0.002356 max=0.002543 Jy/beam ! Clean residual mean=-0.000001 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.0991036 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 19 components and 0.0991036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068960Jy sigma=0.461747 ! Fit after self-cal, rms=0.068993Jy sigma=0.461572 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068993Jy sigma=0.461572 ! Fit after self-cal, rms=0.067769Jy sigma=0.459357 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=8.084 mas, bpa=-1.601 degrees ! Estimated noise=1.18289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412557 Jy ! Component: 100 - total flux cleaned = 0.000415663 Jy ! Component: 150 - total flux cleaned = 0.000417708 Jy ! Component: 200 - total flux cleaned = 0.000417763 Jy ! Total flux subtracted in 200 components = 0.000417763 Jy ! Clean residual min=-0.002039 max=0.002423 Jy/beam ! Clean residual mean=-0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0995214 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0995214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067741Jy sigma=0.459164 ! Fit after self-cal, rms=0.067737Jy sigma=0.459117 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183219 Jy ! Component: 100 - total flux cleaned = 0.00183141 Jy ! Component: 150 - total flux cleaned = 0.00174593 Jy ! Component: 200 - total flux cleaned = 0.00170831 Jy ! Total flux subtracted in 200 components = 0.00170831 Jy ! Clean residual min=-0.001986 max=0.002121 Jy/beam ! Clean residual mean=-0.000001 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.10123 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.10123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067644Jy sigma=0.458435 ! Fit after self-cal, rms=0.067628Jy sigma=0.458392 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067628Jy sigma=0.458392 ! Fit after self-cal, rms=0.067056Jy sigma=0.458271 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=8.049 mas, bpa=-1.527 degrees ! Estimated noise=1.17987 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010516 Jy ! Component: 100 - total flux cleaned = 0.00108269 Jy ! Component: 150 - total flux cleaned = 0.00105484 Jy ! Component: 200 - total flux cleaned = 0.0010285 Jy ! Total flux subtracted in 200 components = 0.0010285 Jy ! Clean residual min=-0.002033 max=0.002063 Jy/beam ! Clean residual mean=-0.000001 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.102258 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.102258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067019Jy sigma=0.458037 ! Fit after self-cal, rms=0.067007Jy sigma=0.458017 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-89, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112299 Jy ! Component: 100 - total flux cleaned = 0.00107689 Jy ! Component: 150 - total flux cleaned = 0.00130188 Jy ! Component: 200 - total flux cleaned = 0.00132895 Jy ! Total flux subtracted in 200 components = 0.00132895 Jy ! Clean residual min=-0.001930 max=0.001671 Jy/beam ! Clean residual mean=-0.000000 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.103587 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.103587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066941Jy sigma=0.457651 ! Fit after self-cal, rms=0.066939Jy sigma=0.457629 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066939Jy sigma=0.457629 ! Fit after self-cal, rms=0.066629Jy sigma=0.457595 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.854 mas, bmaj=13.81 mas, bpa=3.339 degrees ! Estimated noise=1.48661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000770868 Jy ! Component: 100 - total flux cleaned = 0.000871384 Jy ! Component: 150 - total flux cleaned = 0.000855774 Jy ! Component: 200 - total flux cleaned = 0.000841405 Jy ! Total flux subtracted in 200 components = 0.000841405 Jy ! Clean residual min=-0.001611 max=0.001714 Jy/beam ! Clean residual mean=-0.000000 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.104429 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.104429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066623Jy sigma=0.457536 ! Fit after self-cal, rms=0.066617Jy sigma=0.457529 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163027 Jy ! Component: 100 - total flux cleaned = 0.000121025 Jy ! Component: 150 - total flux cleaned = 0.000108452 Jy ! Component: 200 - total flux cleaned = 0.00012005 Jy ! Total flux subtracted in 200 components = 0.00012005 Jy ! Clean residual min=-0.001609 max=0.001740 Jy/beam ! Clean residual mean=-0.000000 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.104549 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 99 components and 0.104549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066615Jy sigma=0.457502 ! Fit after self-cal, rms=0.066614Jy sigma=0.457500 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=8.031 mas, bpa=-1.499 degrees ! Estimated noise=1.1782 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.115 x 8.031 at -1.499 degrees (North through East) ! Clean map min=-0.0018413 max=0.098389 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=6.937 mas, bpa=-1.726 degrees ! Estimated noise=1.64057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.075364 Jy ! Component: 100 - total flux cleaned = 0.0917993 Jy ! Component: 150 - total flux cleaned = 0.0967294 Jy ! Component: 200 - total flux cleaned = 0.0999038 Jy ! Total flux subtracted in 200 components = 0.0999038 Jy ! Clean residual min=-0.003312 max=0.003101 Jy/beam ! Clean residual mean=-0.000001 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.0999038 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0999038 Jy ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=8.031 mas, bpa=-1.499 degrees ! Estimated noise=1.1782 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028582 Jy ! Component: 100 - total flux cleaned = 0.00453415 Jy ! Component: 150 - total flux cleaned = 0.00447641 Jy ! Component: 200 - total flux cleaned = 0.00442609 Jy ! Total flux subtracted in 200 components = 0.00442609 Jy ! Clean residual min=-0.001979 max=0.001960 Jy/beam ! Clean residual mean=-0.000000 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.10433 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 48 components and 0.10433 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.854 mas, bmaj=13.81 mas, bpa=3.339 degrees ! Estimated noise=1.48661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543233 Jy ! Component: 100 - total flux cleaned = 0.000546787 Jy ! Component: 150 - total flux cleaned = 0.000485606 Jy ! Component: 200 - total flux cleaned = 0.000403737 Jy ! Total flux subtracted in 200 components = 0.000403737 Jy ! Clean residual min=-0.001712 max=0.001789 Jy/beam ! Clean residual mean=-0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.104734 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.19149e-05 Jy ! Component: 100 - total flux cleaned = -0.000136855 Jy ! Component: 150 - total flux cleaned = -0.000176464 Jy ! Component: 200 - total flux cleaned = -0.00021342 Jy ! Total flux subtracted in 200 components = -0.00021342 Jy ! Clean residual min=-0.001662 max=0.001804 Jy/beam ! Clean residual mean=-0.000001 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.10452 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 0.10452 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=8.031 mas, bpa=-1.499 degrees ! Estimated noise=1.1782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186265 Jy ! Component: 100 - total flux cleaned = 0.000304463 Jy ! Component: 150 - total flux cleaned = 0.000267003 Jy ! Component: 200 - total flux cleaned = 0.000301185 Jy ! Total flux subtracted in 200 components = 0.000301185 Jy ! Clean residual min=-0.001837 max=0.001825 Jy/beam ! Clean residual mean=-0.000001 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.104821 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.104821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066633Jy sigma=0.457701 ! Fit after self-cal, rms=0.066642Jy sigma=0.457678 wmodel J0629-0505_S_map.mod ! Writing 78 model components to file: J0629-0505_S_map.mod wobs J0629-0505_S_uvs.fits ! Writing UV FITS file: J0629-0505_S_uvs.fits wwins J0629-0505_S_map.win ! wwins: Wrote 3 windows to J0629-0505_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373364 Jy ! Component: 100 - total flux cleaned = -0.000525969 Jy ! Component: 150 - total flux cleaned = -0.000701534 Jy ! Component: 200 - total flux cleaned = -0.000758372 Jy ! Component: 250 - total flux cleaned = -0.00089563 Jy ! Component: 300 - total flux cleaned = -0.000922083 Jy ! Component: 350 - total flux cleaned = -0.000869918 Jy ! Component: 400 - total flux cleaned = -0.000895921 Jy ! Component: 450 - total flux cleaned = -0.000921124 Jy ! Component: 500 - total flux cleaned = -0.000994664 Jy ! Component: 550 - total flux cleaned = -0.000994753 Jy ! Component: 600 - total flux cleaned = -0.00113735 Jy ! Component: 650 - total flux cleaned = -0.00123061 Jy ! Component: 700 - total flux cleaned = -0.00134545 Jy ! Component: 750 - total flux cleaned = -0.00143602 Jy ! Component: 800 - total flux cleaned = -0.00157008 Jy ! Component: 850 - total flux cleaned = -0.00168065 Jy ! Component: 900 - total flux cleaned = -0.00181141 Jy ! Component: 950 - total flux cleaned = -0.00200448 Jy ! Component: 1000 - total flux cleaned = -0.00204673 Jy ! Component: 1050 - total flux cleaned = -0.00221445 Jy ! Component: 1100 - total flux cleaned = -0.00240063 Jy ! Component: 1150 - total flux cleaned = -0.00252312 Jy ! Component: 1200 - total flux cleaned = -0.00262417 Jy ! Component: 1250 - total flux cleaned = -0.00266422 Jy ! Component: 1300 - total flux cleaned = -0.00280273 Jy ! Component: 1350 - total flux cleaned = -0.00286129 Jy ! Component: 1400 - total flux cleaned = -0.00293845 Jy ! Component: 1450 - total flux cleaned = -0.00297661 Jy ! Component: 1500 - total flux cleaned = -0.00307156 Jy ! Component: 1550 - total flux cleaned = -0.00316547 Jy ! Component: 1600 - total flux cleaned = -0.00323979 Jy ! Component: 1650 - total flux cleaned = -0.0032581 Jy ! Component: 1700 - total flux cleaned = -0.00329475 Jy ! Component: 1750 - total flux cleaned = -0.00342184 Jy ! Component: 1800 - total flux cleaned = -0.00343991 Jy ! Component: 1850 - total flux cleaned = -0.00352876 Jy ! Component: 1900 - total flux cleaned = -0.0035464 Jy ! Component: 1950 - total flux cleaned = -0.00358144 Jy ! Component: 2000 - total flux cleaned = -0.00366811 Jy ! Component: 2050 - total flux cleaned = -0.00365088 Jy ! Component: 2100 - total flux cleaned = -0.00373612 Jy ! Component: 2150 - total flux cleaned = -0.00375288 Jy ! Component: 2200 - total flux cleaned = -0.00382009 Jy ! Component: 2250 - total flux cleaned = -0.00383693 Jy ! Component: 2300 - total flux cleaned = -0.00391952 Jy ! Component: 2350 - total flux cleaned = -0.00388671 Jy ! Component: 2400 - total flux cleaned = -0.00390308 Jy ! Component: 2450 - total flux cleaned = -0.00403217 Jy ! Component: 2500 - total flux cleaned = -0.00406412 Jy ! Component: 2550 - total flux cleaned = -0.00407995 Jy ! Component: 2600 - total flux cleaned = -0.00411157 Jy ! Component: 2650 - total flux cleaned = -0.00414297 Jy ! Component: 2700 - total flux cleaned = -0.00415865 Jy ! Component: 2750 - total flux cleaned = -0.00420505 Jy ! Component: 2800 - total flux cleaned = -0.00420512 Jy ! Component: 2850 - total flux cleaned = -0.00426624 Jy ! Component: 2900 - total flux cleaned = -0.00431169 Jy ! Component: 2950 - total flux cleaned = -0.00432679 Jy ! Component: 3000 - total flux cleaned = -0.00432679 Jy ! Component: 3050 - total flux cleaned = -0.00431216 Jy ! Component: 3100 - total flux cleaned = -0.00434172 Jy ! Component: 3150 - total flux cleaned = -0.00435636 Jy ! Component: 3200 - total flux cleaned = -0.0044144 Jy ! Component: 3250 - total flux cleaned = -0.00442868 Jy ! Component: 3300 - total flux cleaned = -0.00441441 Jy ! Component: 3350 - total flux cleaned = -0.00444268 Jy ! Component: 3400 - total flux cleaned = -0.00444268 Jy ! Component: 3450 - total flux cleaned = -0.00442863 Jy ! Component: 3500 - total flux cleaned = -0.00444266 Jy ! Component: 3550 - total flux cleaned = -0.00449797 Jy ! Component: 3600 - total flux cleaned = -0.00455305 Jy ! Component: 3650 - total flux cleaned = -0.00455296 Jy ! Component: 3700 - total flux cleaned = -0.00460725 Jy ! Component: 3750 - total flux cleaned = -0.00458039 Jy ! Component: 3800 - total flux cleaned = -0.00464752 Jy ! Component: 3850 - total flux cleaned = -0.00464762 Jy ! Component: 3900 - total flux cleaned = -0.00474033 Jy ! Component: 3950 - total flux cleaned = -0.00475346 Jy ! Component: 4000 - total flux cleaned = -0.00476653 Jy ! Component: 4050 - total flux cleaned = -0.0048056 Jy ! Total flux subtracted in 4096 components = -0.00485725 Jy ! Clean residual min=-0.000842 max=0.000693 Jy/beam ! Clean residual mean=-0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.0999641 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 347 components and 0.0999642 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0629-0505_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.115 x 8.031 at -1.499 degrees (North through East) ! Clean map min=-0.0014854 max=0.097332 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0629-0505_S_map.fits wmodel /image_prod/ug002_uva//J0629-0505_S_map.mod ! Writing 347 model components to file: /image_prod/ug002_uva//J0629-0505_S_map.mod wobs /image_prod/ug002_uva//J0629-0505_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0629-0505_S_uvs.fits wwins /image_prod/ug002_uva//J0629-0505_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0629-0505_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0973317 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000234984 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.724277 0.724277 1.44855 2.89711 5.79422 11.5884 23.1769 46.3537 92.7075 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.097 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 414.206 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0629-0505_S_dfm.log closed on Wed Mar 4 21:20:18 2020