! Started logfile: /image_prod/ug002_uva//J0629+1527_S_dfm.log on Wed Mar 4 21:20:04 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0629+1527_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0629+1527_S_uva.fits ! AN table 1: 45 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.994444 visibilities/baseline/integration-bin. ! Found source: J0629+1527 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4833 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0629+1527_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.004786Jy sigma=7.980722 ! Fit after self-cal, rms=0.932779Jy sigma=7.428008 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=6.614 mas, bpa=-3.9 degrees ! Estimated noise=1.90517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0536403 Jy ! Component: 100 - total flux cleaned = 0.0653912 Jy ! Total flux subtracted in 100 components = 0.0653912 Jy ! Clean residual min=-0.004334 max=0.003726 Jy/beam ! Clean residual mean=-0.000007 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.0653912 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0653912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067835Jy sigma=0.457078 ! Fit after self-cal, rms=0.067149Jy sigma=0.452095 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=7.133 mas, bpa=-4.856 degrees ! Estimated noise=1.33253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350367 Jy ! Component: 100 - total flux cleaned = 0.00408211 Jy ! Component: 150 - total flux cleaned = 0.00424088 Jy ! Component: 200 - total flux cleaned = 0.00417232 Jy ! Total flux subtracted in 200 components = 0.00417232 Jy ! Clean residual min=-0.003198 max=0.002887 Jy/beam ! Clean residual mean=-0.000005 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0695635 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.0695635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066903Jy sigma=0.451015 ! Fit after self-cal, rms=0.066910Jy sigma=0.451001 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.52 x 7.133 at -4.856 degrees (North through East) ! Clean map min=-0.0031015 max=0.069457 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 1.04 KP 1.04 ! LA 1.00 MK 0.95 NL 1.03 OV 0.95 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.16 KP 1.04 ! LA 0.99 MK 0.96 NL 0.96 OV 0.99 ! SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.98 KP 1.01 ! LA 1.00 MK 0.99 NL 1.00 OV 1.02 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.066910Jy sigma=0.451001 ! Fit after self-cal, rms=0.066221Jy sigma=0.449907 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=7.111 mas, bpa=-4.973 degrees ! Estimated noise=1.33263 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.51982e-05 Jy ! Component: 100 - total flux cleaned = -7.81005e-06 Jy ! Component: 150 - total flux cleaned = -0.000104787 Jy ! Component: 200 - total flux cleaned = -0.000170866 Jy ! Total flux subtracted in 200 components = -0.000170866 Jy ! Clean residual min=-0.003373 max=0.002902 Jy/beam ! Clean residual mean=-0.000006 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.0693927 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 20 components and 0.0693927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066193Jy sigma=0.449830 ! Fit after self-cal, rms=0.066184Jy sigma=0.449772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066184Jy sigma=0.449772 ! Fit after self-cal, rms=0.064424Jy sigma=0.445436 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=7.17 mas, bpa=-4.85 degrees ! Estimated noise=1.32928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173685 Jy ! Component: 100 - total flux cleaned = 0.000205746 Jy ! Component: 150 - total flux cleaned = 0.000205138 Jy ! Component: 200 - total flux cleaned = 0.000247956 Jy ! Total flux subtracted in 200 components = 0.000247956 Jy ! Clean residual min=-0.002665 max=0.002326 Jy/beam ! Clean residual mean=-0.000002 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0696406 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0696406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064397Jy sigma=0.445263 ! Fit after self-cal, rms=0.064414Jy sigma=0.445088 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.02658e-05 Jy ! Component: 100 - total flux cleaned = 8.08643e-06 Jy ! Component: 150 - total flux cleaned = 7.6875e-06 Jy ! Component: 200 - total flux cleaned = 8.39059e-06 Jy ! Total flux subtracted in 200 components = 8.39059e-06 Jy ! Clean residual min=-0.002656 max=0.002347 Jy/beam ! Clean residual mean=-0.000002 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.069649 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.069649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064401Jy sigma=0.445021 ! Fit after self-cal, rms=0.064402Jy sigma=0.445017 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064402Jy sigma=0.445017 ! Fit after self-cal, rms=0.064186Jy sigma=0.444912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=7.17 mas, bpa=-4.807 degrees ! Estimated noise=1.32643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258784 Jy ! Component: 100 - total flux cleaned = 0.000327337 Jy ! Component: 150 - total flux cleaned = 0.00038838 Jy ! Component: 200 - total flux cleaned = 0.000406469 Jy ! Total flux subtracted in 200 components = 0.000406469 Jy ! Clean residual min=-0.002622 max=0.002153 Jy/beam ! Clean residual mean=-0.000001 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0700555 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0700555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064170Jy sigma=0.444811 ! Fit after self-cal, rms=0.064171Jy sigma=0.444803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.28542e-05 Jy ! Component: 100 - total flux cleaned = -2.20957e-05 Jy ! Component: 150 - total flux cleaned = -2.2209e-05 Jy ! Component: 200 - total flux cleaned = -3.75394e-05 Jy ! Total flux subtracted in 200 components = -3.75394e-05 Jy ! Clean residual min=-0.002632 max=0.002144 Jy/beam ! Clean residual mean=-0.000001 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.070018 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.070018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064162Jy sigma=0.444757 ! Fit after self-cal, rms=0.064162Jy sigma=0.444756 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064162Jy sigma=0.444756 ! Fit after self-cal, rms=0.063981Jy sigma=0.444732 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.097 mas, bmaj=10.32 mas, bpa=-4.852 degrees ! Estimated noise=1.57051 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025052 Jy ! Component: 100 - total flux cleaned = 0.000250317 Jy ! Component: 150 - total flux cleaned = 0.000238285 Jy ! Component: 200 - total flux cleaned = 0.000228345 Jy ! Total flux subtracted in 200 components = 0.000228345 Jy ! Clean residual min=-0.002265 max=0.002687 Jy/beam ! Clean residual mean=-0.000004 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0702463 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 39 components and 0.0702463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063980Jy sigma=0.444730 ! Fit after self-cal, rms=0.063975Jy sigma=0.444715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.58741e-05 Jy ! Component: 100 - total flux cleaned = -2.33975e-05 Jy ! Component: 150 - total flux cleaned = -1.63845e-05 Jy ! Component: 200 - total flux cleaned = -2.86588e-06 Jy ! Total flux subtracted in 200 components = -2.86588e-06 Jy ! Clean residual min=-0.002276 max=0.002681 Jy/beam ! Clean residual mean=-0.000004 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0702434 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.0702434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063976Jy sigma=0.444719 ! Fit after self-cal, rms=0.063974Jy sigma=0.444712 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=7.162 mas, bpa=-4.751 degrees ! Estimated noise=1.32461 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.42 x 7.162 at -4.751 degrees (North through East) ! Clean map min=-0.0025494 max=0.069404 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=6.663 mas, bpa=-3.71 degrees ! Estimated noise=1.88561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535212 Jy ! Component: 100 - total flux cleaned = 0.0653808 Jy ! Component: 150 - total flux cleaned = 0.0686904 Jy ! Component: 200 - total flux cleaned = 0.069258 Jy ! Total flux subtracted in 200 components = 0.069258 Jy ! Clean residual min=-0.002922 max=0.002954 Jy/beam ! Clean residual mean=-0.000003 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.069258 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.069258 Jy ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=7.162 mas, bpa=-4.751 degrees ! Estimated noise=1.32461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113223 Jy ! Component: 100 - total flux cleaned = 0.00104842 Jy ! Component: 150 - total flux cleaned = 0.00101143 Jy ! Component: 200 - total flux cleaned = 0.000949712 Jy ! Total flux subtracted in 200 components = 0.000949712 Jy ! Clean residual min=-0.002666 max=0.002130 Jy/beam ! Clean residual mean=-0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.0702077 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 20 components and 0.0702077 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.097 mas, bmaj=10.32 mas, bpa=-4.852 degrees ! Estimated noise=1.57051 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221471 Jy ! Component: 100 - total flux cleaned = 0.000175609 Jy ! Component: 150 - total flux cleaned = 0.00011178 Jy ! Component: 200 - total flux cleaned = 8.09965e-05 Jy ! Total flux subtracted in 200 components = 8.09965e-05 Jy ! Clean residual min=-0.002283 max=0.002707 Jy/beam ! Clean residual mean=-0.000003 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0702887 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.04073e-07 Jy ! Component: 100 - total flux cleaned = -7.53263e-06 Jy ! Component: 150 - total flux cleaned = -1.18135e-07 Jy ! Component: 200 - total flux cleaned = -1.71009e-07 Jy ! Total flux subtracted in 200 components = -1.71009e-07 Jy ! Clean residual min=-0.002293 max=0.002704 Jy/beam ! Clean residual mean=-0.000003 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0702886 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0702886 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=7.162 mas, bpa=-4.751 degrees ! Estimated noise=1.32461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.72472e-05 Jy ! Component: 100 - total flux cleaned = 4.78906e-05 Jy ! Component: 150 - total flux cleaned = 2.30951e-05 Jy ! Component: 200 - total flux cleaned = 1.8365e-06 Jy ! Total flux subtracted in 200 components = 1.8365e-06 Jy ! Clean residual min=-0.002643 max=0.002079 Jy/beam ! Clean residual mean=-0.000001 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0702904 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0702904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063979Jy sigma=0.444738 ! Fit after self-cal, rms=0.063981Jy sigma=0.444723 wmodel J0629+1527_S_map.mod ! Writing 37 model components to file: J0629+1527_S_map.mod wobs J0629+1527_S_uvs.fits ! Writing UV FITS file: J0629+1527_S_uvs.fits wwins J0629+1527_S_map.win ! wwins: Wrote 1 windows to J0629+1527_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000941494 Jy ! Component: 100 - total flux cleaned = -0.000750324 Jy ! Component: 150 - total flux cleaned = -0.000605246 Jy ! Component: 200 - total flux cleaned = -0.000464471 Jy ! Component: 250 - total flux cleaned = -0.000294894 Jy ! Component: 300 - total flux cleaned = -0.000295277 Jy ! Component: 350 - total flux cleaned = -0.00026357 Jy ! Component: 400 - total flux cleaned = -0.000232543 Jy ! Component: 450 - total flux cleaned = -0.000202847 Jy ! Component: 500 - total flux cleaned = -0.000202272 Jy ! Component: 550 - total flux cleaned = -0.000173431 Jy ! Component: 600 - total flux cleaned = -0.000202398 Jy ! Component: 650 - total flux cleaned = -0.000285331 Jy ! Component: 700 - total flux cleaned = -0.000285373 Jy ! Component: 750 - total flux cleaned = -0.000285934 Jy ! Component: 800 - total flux cleaned = -0.000390705 Jy ! Component: 850 - total flux cleaned = -0.000339227 Jy ! Component: 900 - total flux cleaned = -0.000288744 Jy ! Component: 950 - total flux cleaned = -0.000264176 Jy ! Component: 1000 - total flux cleaned = -0.000240128 Jy ! Component: 1050 - total flux cleaned = -0.000192004 Jy ! Component: 1100 - total flux cleaned = -0.000144499 Jy ! Component: 1150 - total flux cleaned = -7.44195e-05 Jy ! Component: 1200 - total flux cleaned = 1.79246e-05 Jy ! Component: 1250 - total flux cleaned = 0.000109044 Jy ! Component: 1300 - total flux cleaned = 0.000131177 Jy ! Component: 1350 - total flux cleaned = 0.000219845 Jy ! Component: 1400 - total flux cleaned = 0.000263359 Jy ! Component: 1450 - total flux cleaned = 0.000198895 Jy ! Component: 1500 - total flux cleaned = 0.000327308 Jy ! Component: 1550 - total flux cleaned = 0.000327117 Jy ! Component: 1600 - total flux cleaned = 0.000306542 Jy ! Component: 1650 - total flux cleaned = 0.000347999 Jy ! Component: 1700 - total flux cleaned = 0.000409104 Jy ! Component: 1750 - total flux cleaned = 0.000388908 Jy ! Component: 1800 - total flux cleaned = 0.000469108 Jy ! Component: 1850 - total flux cleaned = 0.000508361 Jy ! Component: 1900 - total flux cleaned = 0.000566718 Jy ! Component: 1950 - total flux cleaned = 0.000624689 Jy ! Component: 2000 - total flux cleaned = 0.000605651 Jy ! Component: 2050 - total flux cleaned = 0.000643742 Jy ! Component: 2100 - total flux cleaned = 0.000756596 Jy ! Component: 2150 - total flux cleaned = 0.000682117 Jy ! Component: 2200 - total flux cleaned = 0.000756225 Jy ! Component: 2250 - total flux cleaned = 0.00082918 Jy ! Component: 2300 - total flux cleaned = 0.000883492 Jy ! Component: 2350 - total flux cleaned = 0.000883286 Jy ! Component: 2400 - total flux cleaned = 0.00088324 Jy ! Component: 2450 - total flux cleaned = 0.000918271 Jy ! Component: 2500 - total flux cleaned = 0.000900877 Jy ! Component: 2550 - total flux cleaned = 0.000970091 Jy ! Component: 2600 - total flux cleaned = 0.000952699 Jy ! Component: 2650 - total flux cleaned = 0.000952415 Jy ! Component: 2700 - total flux cleaned = 0.000884753 Jy ! Component: 2750 - total flux cleaned = 0.000969027 Jy ! Component: 2800 - total flux cleaned = 0.000985575 Jy ! Component: 2850 - total flux cleaned = 0.0010353 Jy ! Component: 2900 - total flux cleaned = 0.00101906 Jy ! Component: 2950 - total flux cleaned = 0.00103517 Jy ! Component: 3000 - total flux cleaned = 0.00109965 Jy ! Component: 3050 - total flux cleaned = 0.00113156 Jy ! Component: 3100 - total flux cleaned = 0.0010523 Jy ! Component: 3150 - total flux cleaned = 0.0010994 Jy ! Component: 3200 - total flux cleaned = 0.00109929 Jy ! Component: 3250 - total flux cleaned = 0.00108347 Jy ! Component: 3300 - total flux cleaned = 0.00103738 Jy ! Component: 3350 - total flux cleaned = 0.00106796 Jy ! Component: 3400 - total flux cleaned = 0.00108314 Jy ! Component: 3450 - total flux cleaned = 0.00100828 Jy ! Component: 3500 - total flux cleaned = 0.00105311 Jy ! Component: 3550 - total flux cleaned = 0.0010827 Jy ! Component: 3600 - total flux cleaned = 0.00106809 Jy ! Component: 3650 - total flux cleaned = 0.00106801 Jy ! Component: 3700 - total flux cleaned = 0.00109716 Jy ! Component: 3750 - total flux cleaned = 0.00105386 Jy ! Component: 3800 - total flux cleaned = 0.00105402 Jy ! Component: 3850 - total flux cleaned = 0.0010967 Jy ! Component: 3900 - total flux cleaned = 0.00106851 Jy ! Component: 3950 - total flux cleaned = 0.00105451 Jy ! Component: 4000 - total flux cleaned = 0.0010823 Jy ! Component: 4050 - total flux cleaned = 0.00112375 Jy ! Total flux subtracted in 4096 components = 0.00110996 Jy ! Clean residual min=-0.000742 max=0.000772 Jy/beam ! Clean residual mean=-0.000002 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.0714004 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 322 components and 0.0714004 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0629+1527_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.42 x 7.162 at -4.751 degrees (North through East) ! Clean map min=-0.0020094 max=0.069283 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0629+1527_S_map.fits wmodel /image_prod/ug002_uva//J0629+1527_S_map.mod ! Writing 322 model components to file: /image_prod/ug002_uva//J0629+1527_S_map.mod wobs /image_prod/ug002_uva//J0629+1527_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0629+1527_S_uvs.fits wwins /image_prod/ug002_uva//J0629+1527_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0629+1527_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0692831 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000248059 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07411 1.07411 2.14822 4.29644 8.59287 17.1857 34.3715 68.743 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.069 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 279.301 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0629+1527_S_dfm.log closed on Wed Mar 4 21:20:08 2020