! Started logfile: /image_prod/ug002_uva//J0628+2835_S_dfm.log on Wed Mar  4 21:19:54 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0628+2835_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0628+2835_S_uva.fits
! AN table 1: 60 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.973214 visibilities/baseline/integration-bin.
! Found source: J0628+2835
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 36 lines of history.
! 
! Reading 4905 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0628+2835_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.991894Jy  sigma=7.989543
! Fit after  self-cal, rms=0.846931Jy  sigma=6.829757
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.625 mas, bmaj=5.944 mas, bpa=-3.928 degrees
! Estimated noise=1.93265 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122092 Jy
! Component: 100  -  total flux cleaned = 0.170042 Jy
! Total flux subtracted in 100 components = 0.170042 Jy
! Clean residual min=-0.009818 max=0.021399 Jy/beam
! Clean residual mean=-0.000009 rms=0.003173 Jy/beam
! Combined flux in latest and established models = 0.170042 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.170042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077214Jy  sigma=0.549308
! Fit after  self-cal, rms=0.076366Jy  sigma=0.540308
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0250272 Jy
! Component: 100  -  total flux cleaned = 0.037799 Jy
! Total flux subtracted in 100 components = 0.037799 Jy
! Clean residual min=-0.006219 max=0.012596 Jy/beam
! Clean residual mean=-0.000003 rms=0.001853 Jy/beam
! Combined flux in latest and established models = 0.207842 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.207842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068220Jy  sigma=0.468797
! Fit after  self-cal, rms=0.068050Jy  sigma=0.467337
! Inverting map 
! Added new window around map position (3.5, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112694 Jy
! Component: 100  -  total flux cleaned = 0.017455 Jy
! Total flux subtracted in 100 components = 0.017455 Jy
! Clean residual min=-0.005692 max=0.005462 Jy/beam
! Clean residual mean=-0.000001 rms=0.001399 Jy/beam
! Combined flux in latest and established models = 0.225297 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 25 components and 0.225297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066386Jy  sigma=0.452202
! Fit after  self-cal, rms=0.066271Jy  sigma=0.451267
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.004 mas, bmaj=6.214 mas, bpa=-4.319 degrees
! Estimated noise=1.3093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00445087 Jy
! Component: 100  -  total flux cleaned = 0.00748707 Jy
! Component: 150  -  total flux cleaned = 0.00966632 Jy
! Component: 200  -  total flux cleaned = 0.010733 Jy
! Total flux subtracted in 200 components = 0.010733 Jy
! Clean residual min=-0.005151 max=0.004121 Jy/beam
! Clean residual mean=0.000003 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.23603 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 42 components and 0.23603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065870Jy  sigma=0.447927
! Fit after  self-cal, rms=0.065848Jy  sigma=0.447773
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.004 x 6.214 at -4.319 degrees (North through East)
! Clean map  min=-0.0048185  max=0.1465 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        1.04     KP        1.03     
!   MK        1.10     NL        1.00     OV        0.92     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.01     KP        1.04     
!   MK        1.10     NL        1.07     OV        0.91     SC        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.01     KP        1.03     
!   MK        1.05     NL        0.96     OV        0.95     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.065848Jy  sigma=0.447773
! Fit after  self-cal, rms=0.066367Jy  sigma=0.439547
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.065 mas, bmaj=6.262 mas, bpa=-4.056 degrees
! Estimated noise=1.33413 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000235531 Jy
! Component: 100  -  total flux cleaned = -0.000557603 Jy
! Component: 150  -  total flux cleaned = -0.000677887 Jy
! Component: 200  -  total flux cleaned = -0.000824398 Jy
! Total flux subtracted in 200 components = -0.000824398 Jy
! Clean residual min=-0.003171 max=0.003094 Jy/beam
! Clean residual mean=0.000003 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.235205 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 55 components and 0.235205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066298Jy  sigma=0.439125
! Fit after  self-cal, rms=0.066321Jy  sigma=0.439037
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066321Jy  sigma=0.439037
! Fit after  self-cal, rms=0.062481Jy  sigma=0.430190
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.048 mas, bmaj=6.276 mas, bpa=-4.082 degrees
! Estimated noise=1.32851 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000201441 Jy
! Component: 100  -  total flux cleaned = -0.000326101 Jy
! Component: 150  -  total flux cleaned = -0.000325761 Jy
! Component: 200  -  total flux cleaned = -0.000348808 Jy
! Total flux subtracted in 200 components = -0.000348808 Jy
! Clean residual min=-0.002196 max=0.002169 Jy/beam
! Clean residual mean=-0.000000 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.234856 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 64 components and 0.234856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062452Jy  sigma=0.429957
! Fit after  self-cal, rms=0.062435Jy  sigma=0.429896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.05087e-06 Jy
! Component: 100  -  total flux cleaned = -4.53277e-05 Jy
! Component: 150  -  total flux cleaned = -8.35349e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101639 Jy
! Total flux subtracted in 200 components = -0.000101639 Jy
! Clean residual min=-0.002194 max=0.002157 Jy/beam
! Clean residual mean=-0.000000 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.234755 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 68 components and 0.234755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062423Jy  sigma=0.429796
! Fit after  self-cal, rms=0.062421Jy  sigma=0.429793
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062421Jy  sigma=0.429793
! Fit after  self-cal, rms=0.062367Jy  sigma=0.429705
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.051 mas, bmaj=6.274 mas, bpa=-4.137 degrees
! Estimated noise=1.32912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000176669 Jy
! Component: 100  -  total flux cleaned = -0.000236724 Jy
! Component: 150  -  total flux cleaned = -0.000328384 Jy
! Component: 200  -  total flux cleaned = -0.000380064 Jy
! Total flux subtracted in 200 components = -0.000380064 Jy
! Clean residual min=-0.002221 max=0.002136 Jy/beam
! Clean residual mean=-0.000001 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.234375 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 71 components and 0.234375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062356Jy  sigma=0.429612
! Fit after  self-cal, rms=0.062354Jy  sigma=0.429609
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.90996e-05 Jy
! Component: 100  -  total flux cleaned = -8.59841e-05 Jy
! Component: 150  -  total flux cleaned = -0.000129395 Jy
! Component: 200  -  total flux cleaned = -0.000171596 Jy
! Total flux subtracted in 200 components = -0.000171596 Jy
! Clean residual min=-0.002224 max=0.002125 Jy/beam
! Clean residual mean=-0.000001 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.234203 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 0.234203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062347Jy  sigma=0.429555
! Fit after  self-cal, rms=0.062345Jy  sigma=0.429554
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062345Jy  sigma=0.429554
! Fit after  self-cal, rms=0.062413Jy  sigma=0.429540
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.244 mas, bmaj=8.681 mas, bpa=-3.466 degrees
! Estimated noise=1.66987 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192683 Jy
! Component: 100  -  total flux cleaned = 0.000150467 Jy
! Component: 150  -  total flux cleaned = 6.08275e-05 Jy
! Component: 200  -  total flux cleaned = -1.14405e-05 Jy
! Total flux subtracted in 200 components = -1.14405e-05 Jy
! Clean residual min=-0.002255 max=0.001947 Jy/beam
! Clean residual mean=-0.000001 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.234192 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 83 components and 0.234192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062420Jy  sigma=0.429578
! Fit after  self-cal, rms=0.062419Jy  sigma=0.429557
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.37044e-06 Jy
! Component: 100  -  total flux cleaned = -2.51035e-05 Jy
! Component: 150  -  total flux cleaned = -4.5464e-05 Jy
! Component: 200  -  total flux cleaned = -6.36759e-05 Jy
! Total flux subtracted in 200 components = -6.36759e-05 Jy
! Clean residual min=-0.002235 max=0.001885 Jy/beam
! Clean residual mean=-0.000002 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.234128 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 85 components and 0.234128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062428Jy  sigma=0.429624
! Fit after  self-cal, rms=0.062428Jy  sigma=0.429621
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=6.273 mas, bpa=-4.188 degrees
! Estimated noise=1.32973 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.054 x 6.273 at -4.188 degrees (North through East)
! Clean map  min=-0.0021728  max=0.14802 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.677 mas, bmaj=6.008 mas, bpa=-3.733 degrees
! Estimated noise=1.96952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.124735 Jy
! Component: 100  -  total flux cleaned = 0.174265 Jy
! Component: 150  -  total flux cleaned = 0.197516 Jy
! Component: 200  -  total flux cleaned = 0.210644 Jy
! Total flux subtracted in 200 components = 0.210644 Jy
! Clean residual min=-0.005169 max=0.007241 Jy/beam
! Clean residual mean=-0.000004 rms=0.001305 Jy/beam
! Combined flux in latest and established models = 0.210645 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.210645 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=6.273 mas, bpa=-4.188 degrees
! Estimated noise=1.32973 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0084667 Jy
! Component: 100  -  total flux cleaned = 0.0137591 Jy
! Component: 150  -  total flux cleaned = 0.0172141 Jy
! Component: 200  -  total flux cleaned = 0.019515 Jy
! Total flux subtracted in 200 components = 0.019515 Jy
! Clean residual min=-0.002323 max=0.002995 Jy/beam
! Clean residual mean=-0.000001 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.230159 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 32 components and 0.23016 Jy
! Inverting map 
! Added new window around map position (7.5, 5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257051 Jy
! Component: 100  -  total flux cleaned = 0.00415904 Jy
! Component: 150  -  total flux cleaned = 0.00505671 Jy
! Component: 200  -  total flux cleaned = 0.0054603 Jy
! Total flux subtracted in 200 components = 0.0054603 Jy
! Clean residual min=-0.002199 max=0.001970 Jy/beam
! Clean residual mean=-0.000001 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.23562 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 47 components and 0.23562 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.244 mas, bmaj=8.681 mas, bpa=-3.466 degrees
! Estimated noise=1.66987 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000341863 Jy
! Component: 100  -  total flux cleaned = -0.000410158 Jy
! Component: 150  -  total flux cleaned = -0.000439108 Jy
! Component: 200  -  total flux cleaned = -0.000538408 Jy
! Total flux subtracted in 200 components = -0.000538408 Jy
! Clean residual min=-0.002241 max=0.001944 Jy/beam
! Clean residual mean=-0.000002 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.235081 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.31607e-05 Jy
! Component: 100  -  total flux cleaned = -8.22556e-05 Jy
! Component: 150  -  total flux cleaned = -9.9121e-05 Jy
! Component: 200  -  total flux cleaned = -9.93592e-05 Jy
! Total flux subtracted in 200 components = -9.93592e-05 Jy
! Clean residual min=-0.002205 max=0.001936 Jy/beam
! Clean residual mean=-0.000002 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.234982 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 83 components and 0.234982 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=6.273 mas, bpa=-4.188 degrees
! Estimated noise=1.32973 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000910214 Jy
! Component: 100  -  total flux cleaned = 0.00141061 Jy
! Component: 150  -  total flux cleaned = 0.00153059 Jy
! Component: 200  -  total flux cleaned = 0.00158177 Jy
! Total flux subtracted in 200 components = 0.00158177 Jy
! Clean residual min=-0.002111 max=0.001988 Jy/beam
! Clean residual mean=-0.000001 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.236564 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.236564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062332Jy  sigma=0.429011
! Fit after  self-cal, rms=0.062311Jy  sigma=0.428912
wmodel J0628+2835_S_map.mod
! Writing 99 model components to file: J0628+2835_S_map.mod
wobs   J0628+2835_S_uvs.fits
! Writing UV FITS file: J0628+2835_S_uvs.fits
wwins  J0628+2835_S_map.win
! wwins: Wrote 3 windows to J0628+2835_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00019879 Jy
! Component: 100  -  total flux cleaned = -0.00030692 Jy
! Component: 150  -  total flux cleaned = -0.000441557 Jy
! Component: 200  -  total flux cleaned = -0.000474339 Jy
! Component: 250  -  total flux cleaned = -0.00053595 Jy
! Component: 300  -  total flux cleaned = -0.000504916 Jy
! Component: 350  -  total flux cleaned = -0.000591958 Jy
! Component: 400  -  total flux cleaned = -0.000620454 Jy
! Component: 450  -  total flux cleaned = -0.000621164 Jy
! Component: 500  -  total flux cleaned = -0.000756969 Jy
! Component: 550  -  total flux cleaned = -0.000783477 Jy
! Component: 600  -  total flux cleaned = -0.000809346 Jy
! Component: 650  -  total flux cleaned = -0.000809215 Jy
! Component: 700  -  total flux cleaned = -0.000834663 Jy
! Component: 750  -  total flux cleaned = -0.000835038 Jy
! Component: 800  -  total flux cleaned = -0.000883388 Jy
! Component: 850  -  total flux cleaned = -0.000883232 Jy
! Component: 900  -  total flux cleaned = -0.000883014 Jy
! Component: 950  -  total flux cleaned = -0.00088315 Jy
! Component: 1000  -  total flux cleaned = -0.000883627 Jy
! Component: 1050  -  total flux cleaned = -0.000949573 Jy
! Component: 1100  -  total flux cleaned = -0.000971174 Jy
! Component: 1150  -  total flux cleaned = -0.000992761 Jy
! Component: 1200  -  total flux cleaned = -0.00107741 Jy
! Component: 1250  -  total flux cleaned = -0.00109812 Jy
! Component: 1300  -  total flux cleaned = -0.00117956 Jy
! Component: 1350  -  total flux cleaned = -0.00127982 Jy
! Component: 1400  -  total flux cleaned = -0.00133881 Jy
! Component: 1450  -  total flux cleaned = -0.00135859 Jy
! Component: 1500  -  total flux cleaned = -0.00143589 Jy
! Component: 1550  -  total flux cleaned = -0.00149276 Jy
! Component: 1600  -  total flux cleaned = -0.00151181 Jy
! Component: 1650  -  total flux cleaned = -0.00166009 Jy
! Component: 1700  -  total flux cleaned = -0.00171522 Jy
! Component: 1750  -  total flux cleaned = -0.00184218 Jy
! Component: 1800  -  total flux cleaned = -0.00194927 Jy
! Component: 1850  -  total flux cleaned = -0.00205516 Jy
! Component: 1900  -  total flux cleaned = -0.00208993 Jy
! Component: 1950  -  total flux cleaned = -0.00212469 Jy
! Component: 2000  -  total flux cleaned = -0.00222722 Jy
! Component: 2050  -  total flux cleaned = -0.00227795 Jy
! Component: 2100  -  total flux cleaned = -0.00239495 Jy
! Component: 2150  -  total flux cleaned = -0.00241135 Jy
! Component: 2200  -  total flux cleaned = -0.00246039 Jy
! Component: 2250  -  total flux cleaned = -0.00249285 Jy
! Component: 2300  -  total flux cleaned = -0.00257311 Jy
! Component: 2350  -  total flux cleaned = -0.00263689 Jy
! Component: 2400  -  total flux cleaned = -0.00268411 Jy
! Component: 2450  -  total flux cleaned = -0.00279335 Jy
! Component: 2500  -  total flux cleaned = -0.00283965 Jy
! Component: 2550  -  total flux cleaned = -0.00291635 Jy
! Component: 2600  -  total flux cleaned = -0.00302243 Jy
! Component: 2650  -  total flux cleaned = -0.00308261 Jy
! Component: 2700  -  total flux cleaned = -0.00314204 Jy
! Component: 2750  -  total flux cleaned = -0.00318653 Jy
! Component: 2800  -  total flux cleaned = -0.00321592 Jy
! Component: 2850  -  total flux cleaned = -0.00331784 Jy
! Component: 2900  -  total flux cleaned = -0.0034188 Jy
! Component: 2950  -  total flux cleaned = -0.00349017 Jy
! Component: 3000  -  total flux cleaned = -0.00357523 Jy
! Component: 3050  -  total flux cleaned = -0.0036457 Jy
! Component: 3100  -  total flux cleaned = -0.00370154 Jy
! Component: 3150  -  total flux cleaned = -0.00377075 Jy
! Component: 3200  -  total flux cleaned = -0.00381205 Jy
! Component: 3250  -  total flux cleaned = -0.00389417 Jy
! Component: 3300  -  total flux cleaned = -0.00393479 Jy
! Component: 3350  -  total flux cleaned = -0.00396184 Jy
! Component: 3400  -  total flux cleaned = -0.00402874 Jy
! Component: 3450  -  total flux cleaned = -0.0041084 Jy
! Component: 3500  -  total flux cleaned = -0.00414783 Jy
! Component: 3550  -  total flux cleaned = -0.00414777 Jy
! Component: 3600  -  total flux cleaned = -0.00416102 Jy
! Component: 3650  -  total flux cleaned = -0.00423894 Jy
! Component: 3700  -  total flux cleaned = -0.00431624 Jy
! Component: 3750  -  total flux cleaned = -0.0043163 Jy
! Component: 3800  -  total flux cleaned = -0.00439261 Jy
! Component: 3850  -  total flux cleaned = -0.00441788 Jy
! Component: 3900  -  total flux cleaned = -0.00444292 Jy
! Component: 3950  -  total flux cleaned = -0.00446787 Jy
! Component: 4000  -  total flux cleaned = -0.00453001 Jy
! Component: 4050  -  total flux cleaned = -0.0045917 Jy
! Total flux subtracted in 4096 components = -0.00461625 Jy
! Clean residual min=-0.000798 max=0.000745 Jy/beam
! Clean residual mean=-0.000001 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.231948 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 404 components and 0.231948 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0628+2835_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.054 x 6.273 at -4.188 degrees (North through East)
! Clean map  min=-0.0017117  max=0.14808 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0628+2835_S_map.fits
wmodel /image_prod/ug002_uva//J0628+2835_S_map.mod
! Writing 404 model components to file: /image_prod/ug002_uva//J0628+2835_S_map.mod
wobs   /image_prod/ug002_uva//J0628+2835_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0628+2835_S_uvs.fits
wwins  /image_prod/ug002_uva//J0628+2835_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0628+2835_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.148084 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000214318 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.434182 0.434182 0.868365 1.73673 3.47346 6.94692 13.8938 27.7877 55.5753
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.148 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  690.953 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0628+2835_S_dfm.log closed on Wed Mar  4 21:19:58 2020