! Started logfile: /image_prod/ug002_uva//J0627-3529_S_dfm.log on Wed Mar 4 21:19:46 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0627-3529_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0627-3529_S_uva.fits ! AN table 1: 25 integrations on 15 of 15 possible baselines. ! AN table 2: 25 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.977333 visibilities/baseline/integration-bin. ! Found source: J0627-3529 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 2199 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0627-3529_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.050339Jy sigma=5.509667 ! Fit after self-cal, rms=0.702612Jy sigma=3.514150 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=12.34 mas, bpa=-13.54 degrees ! Estimated noise=4.23149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.258687 Jy ! Component: 100 - total flux cleaned = 0.331086 Jy ! Total flux subtracted in 100 components = 0.331086 Jy ! Clean residual min=-0.028642 max=0.054389 Jy/beam ! Clean residual mean=-0.000222 rms=0.010274 Jy/beam ! Combined flux in latest and established models = 0.331086 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.331086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.127439Jy sigma=0.667436 ! Fit after self-cal, rms=0.127525Jy sigma=0.667163 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=12.74 mas, bpa=-9.961 degrees ! Estimated noise=2.97824 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362048 Jy ! Component: 100 - total flux cleaned = 0.0568749 Jy ! Component: 150 - total flux cleaned = 0.068117 Jy ! Component: 200 - total flux cleaned = 0.0714011 Jy ! Total flux subtracted in 200 components = 0.0714011 Jy ! Clean residual min=-0.027333 max=0.036971 Jy/beam ! Clean residual mean=-0.000583 rms=0.009436 Jy/beam ! Combined flux in latest and established models = 0.402487 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.402487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.119232Jy sigma=0.594385 ! Fit after self-cal, rms=0.119214Jy sigma=0.593931 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.413 x 12.74 at -9.961 degrees (North through East) ! Clean map min=-0.026728 max=0.27349 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.29 LA 0.85 NL 1.14 OV 0.97 ! PT 0.85 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.36 KP 0.98 LA 1.01 MK 1.00 ! NL 1.08 OV 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 1.33 LA 0.86 NL 1.20 OV 1.01 ! PT 0.84 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 2.83 KP 0.94 LA 0.96 MK 0.99 ! NL 1.17 OV 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.37 LA 0.86 NL 1.14 OV 1.03 ! PT 0.87 SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.59 KP 0.93 LA 1.00 MK 0.99 ! NL 1.08 OV 0.87 ! ! ! Fit before self-cal, rms=0.119214Jy sigma=0.593931 ! Fit after self-cal, rms=0.131048Jy sigma=0.453797 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.408 mas, bmaj=12.75 mas, bpa=-9.119 degrees ! Estimated noise=3.08851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00454577 Jy ! Component: 100 - total flux cleaned = -0.00454664 Jy ! Component: 150 - total flux cleaned = -0.00479576 Jy ! Component: 200 - total flux cleaned = -0.00501259 Jy ! Total flux subtracted in 200 components = -0.00501259 Jy ! Clean residual min=-0.012848 max=0.014059 Jy/beam ! Clean residual mean=-0.000153 rms=0.003612 Jy/beam ! Combined flux in latest and established models = 0.397475 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.397475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.129667Jy sigma=0.449208 ! Fit after self-cal, rms=0.130480Jy sigma=0.448350 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130480Jy sigma=0.448350 ! Fit after self-cal, rms=0.131532Jy sigma=0.447872 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=12.81 mas, bpa=-9.214 degrees ! Estimated noise=3.08332 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00386012 Jy ! Component: 100 - total flux cleaned = -0.00386176 Jy ! Component: 150 - total flux cleaned = -0.00424168 Jy ! Component: 200 - total flux cleaned = -0.00441464 Jy ! Total flux subtracted in 200 components = -0.00441464 Jy ! Clean residual min=-0.011856 max=0.013491 Jy/beam ! Clean residual mean=-0.000133 rms=0.003385 Jy/beam ! Combined flux in latest and established models = 0.39306 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.39306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130624Jy sigma=0.445426 ! Fit after self-cal, rms=0.130573Jy sigma=0.445386 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149224 Jy ! Component: 100 - total flux cleaned = -0.000461744 Jy ! Component: 150 - total flux cleaned = -0.0007584 Jy ! Component: 200 - total flux cleaned = -0.000897485 Jy ! Total flux subtracted in 200 components = -0.000897485 Jy ! Clean residual min=-0.011330 max=0.013012 Jy/beam ! Clean residual mean=-0.000136 rms=0.003288 Jy/beam ! Combined flux in latest and established models = 0.392163 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.392163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130070Jy sigma=0.443904 ! Fit after self-cal, rms=0.130038Jy sigma=0.443875 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130038Jy sigma=0.443875 ! Fit after self-cal, rms=0.131054Jy sigma=0.443281 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=12.87 mas, bpa=-9.245 degrees ! Estimated noise=3.08006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00334217 Jy ! Component: 100 - total flux cleaned = -0.00380129 Jy ! Component: 150 - total flux cleaned = -0.00408839 Jy ! Component: 200 - total flux cleaned = -0.00435912 Jy ! Total flux subtracted in 200 components = -0.00435912 Jy ! Clean residual min=-0.010721 max=0.012727 Jy/beam ! Clean residual mean=-0.000110 rms=0.003134 Jy/beam ! Combined flux in latest and established models = 0.387804 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.387804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130497Jy sigma=0.442109 ! Fit after self-cal, rms=0.130478Jy sigma=0.442085 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120369 Jy ! Component: 100 - total flux cleaned = -0.000368603 Jy ! Component: 150 - total flux cleaned = -0.000604491 Jy ! Component: 200 - total flux cleaned = -0.0008268 Jy ! Total flux subtracted in 200 components = -0.0008268 Jy ! Clean residual min=-0.010398 max=0.012277 Jy/beam ! Clean residual mean=-0.000112 rms=0.003074 Jy/beam ! Combined flux in latest and established models = 0.386977 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.386977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130166Jy sigma=0.441209 ! Fit after self-cal, rms=0.130148Jy sigma=0.441186 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130148Jy sigma=0.441186 ! Fit after self-cal, rms=0.131182Jy sigma=0.440766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.311 mas, bmaj=24.36 mas, bpa=-4.581 degrees ! Estimated noise=3.71543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00307444 Jy ! Component: 100 - total flux cleaned = -0.00331795 Jy ! Component: 150 - total flux cleaned = -0.00342743 Jy ! Component: 200 - total flux cleaned = -0.003624 Jy ! Total flux subtracted in 200 components = -0.003624 Jy ! Clean residual min=-0.011956 max=0.013077 Jy/beam ! Clean residual mean=-0.000190 rms=0.004105 Jy/beam ! Combined flux in latest and established models = 0.383353 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.383353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130887Jy sigma=0.440662 ! Fit after self-cal, rms=0.130786Jy sigma=0.440401 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.33117e-05 Jy ! Component: 100 - total flux cleaned = -9.62106e-05 Jy ! Component: 150 - total flux cleaned = -0.000175141 Jy ! Component: 200 - total flux cleaned = -0.000252123 Jy ! Total flux subtracted in 200 components = -0.000252123 Jy ! Clean residual min=-0.011968 max=0.012918 Jy/beam ! Clean residual mean=-0.000193 rms=0.004088 Jy/beam ! Combined flux in latest and established models = 0.383101 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.383101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130675Jy sigma=0.440566 ! Fit after self-cal, rms=0.130618Jy sigma=0.440465 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=12.93 mas, bpa=-9.267 degrees ! Estimated noise=3.07652 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.427 x 12.93 at -9.267 degrees (North through East) ! Clean map min=-0.010444 max=0.29539 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=12.42 mas, bpa=-12.87 degrees ! Estimated noise=4.31563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.263283 Jy ! Component: 100 - total flux cleaned = 0.325294 Jy ! Component: 150 - total flux cleaned = 0.350511 Jy ! Component: 200 - total flux cleaned = 0.3629 Jy ! Total flux subtracted in 200 components = 0.3629 Jy ! Clean residual min=-0.012308 max=0.015484 Jy/beam ! Clean residual mean=-0.000067 rms=0.003595 Jy/beam ! Combined flux in latest and established models = 0.3629 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.3629 Jy ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=12.93 mas, bpa=-9.267 degrees ! Estimated noise=3.07652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508081 Jy ! Component: 100 - total flux cleaned = 0.00641585 Jy ! Component: 150 - total flux cleaned = 0.00710583 Jy ! Component: 200 - total flux cleaned = 0.00791017 Jy ! Total flux subtracted in 200 components = 0.00791017 Jy ! Clean residual min=-0.011140 max=0.013002 Jy/beam ! Clean residual mean=-0.000103 rms=0.003287 Jy/beam ! Combined flux in latest and established models = 0.37081 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.37081 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.311 mas, bmaj=24.36 mas, bpa=-4.581 degrees ! Estimated noise=3.71543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395964 Jy ! Component: 100 - total flux cleaned = 0.00437621 Jy ! Component: 150 - total flux cleaned = 0.0048893 Jy ! Component: 200 - total flux cleaned = 0.00534402 Jy ! Total flux subtracted in 200 components = 0.00534402 Jy ! Clean residual min=-0.013040 max=0.013892 Jy/beam ! Clean residual mean=-0.000210 rms=0.004583 Jy/beam ! Combined flux in latest and established models = 0.376154 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312942 Jy ! Component: 100 - total flux cleaned = 0.000506525 Jy ! Component: 150 - total flux cleaned = 0.000783121 Jy ! Component: 200 - total flux cleaned = 0.0009574 Jy ! Total flux subtracted in 200 components = 0.0009574 Jy ! Clean residual min=-0.013120 max=0.013530 Jy/beam ! Clean residual mean=-0.000208 rms=0.004479 Jy/beam ! Combined flux in latest and established models = 0.377111 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.377111 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=12.93 mas, bpa=-9.267 degrees ! Estimated noise=3.07652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000981941 Jy ! Component: 100 - total flux cleaned = -0.00133493 Jy ! Component: 150 - total flux cleaned = -0.00160427 Jy ! Component: 200 - total flux cleaned = -0.00159369 Jy ! Total flux subtracted in 200 components = -0.00159369 Jy ! Clean residual min=-0.010330 max=0.011655 Jy/beam ! Clean residual mean=-0.000103 rms=0.002984 Jy/beam ! Combined flux in latest and established models = 0.375518 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.375518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.130243Jy sigma=0.439911 ! Fit after self-cal, rms=0.130151Jy sigma=0.439697 wmodel J0627-3529_S_map.mod ! Writing 64 model components to file: J0627-3529_S_map.mod wobs J0627-3529_S_uvs.fits ! Writing UV FITS file: J0627-3529_S_uvs.fits wwins J0627-3529_S_map.win ! wwins: Wrote 1 windows to J0627-3529_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313664 Jy ! Component: 100 - total flux cleaned = 0.00604424 Jy ! Component: 150 - total flux cleaned = 0.00767451 Jy ! Component: 200 - total flux cleaned = 0.0086293 Jy ! Component: 250 - total flux cleaned = 0.00938921 Jy ! Component: 300 - total flux cleaned = 0.00985852 Jy ! Component: 350 - total flux cleaned = 0.00996527 Jy ! Component: 400 - total flux cleaned = 0.010066 Jy ! Component: 450 - total flux cleaned = 0.010068 Jy ! Component: 500 - total flux cleaned = 0.0103502 Jy ! Component: 550 - total flux cleaned = 0.0106135 Jy ! Component: 600 - total flux cleaned = 0.0109471 Jy ! Component: 650 - total flux cleaned = 0.0111875 Jy ! Component: 700 - total flux cleaned = 0.0111901 Jy ! Component: 750 - total flux cleaned = 0.0109721 Jy ! Component: 800 - total flux cleaned = 0.0104844 Jy ! Component: 850 - total flux cleaned = 0.010017 Jy ! Component: 900 - total flux cleaned = 0.00949869 Jy ! Component: 950 - total flux cleaned = 0.00899829 Jy ! Component: 1000 - total flux cleaned = 0.00845518 Jy ! Component: 1050 - total flux cleaned = 0.00792906 Jy ! Component: 1100 - total flux cleaned = 0.00736477 Jy ! Component: 1150 - total flux cleaned = 0.00692838 Jy ! Component: 1200 - total flux cleaned = 0.00634628 Jy ! Component: 1250 - total flux cleaned = 0.00588593 Jy ! Component: 1300 - total flux cleaned = 0.00553744 Jy ! Component: 1350 - total flux cleaned = 0.0051018 Jy ! Component: 1400 - total flux cleaned = 0.00472609 Jy ! Component: 1450 - total flux cleaned = 0.00435999 Jy ! Component: 1500 - total flux cleaned = 0.0039577 Jy ! Component: 1550 - total flux cleaned = 0.00360703 Jy ! Component: 1600 - total flux cleaned = 0.00322189 Jy ! Component: 1650 - total flux cleaned = 0.00309649 Jy ! Component: 1700 - total flux cleaned = 0.00297269 Jy ! Component: 1750 - total flux cleaned = 0.00301347 Jy ! Component: 1800 - total flux cleaned = 0.0029731 Jy ! Component: 1850 - total flux cleaned = 0.00289375 Jy ! Component: 1900 - total flux cleaned = 0.00285417 Jy ! Component: 1950 - total flux cleaned = 0.00273718 Jy ! Component: 2000 - total flux cleaned = 0.00262114 Jy ! Component: 2050 - total flux cleaned = 0.00250572 Jy ! Component: 2100 - total flux cleaned = 0.00242912 Jy ! Component: 2150 - total flux cleaned = 0.00231435 Jy ! Component: 2200 - total flux cleaned = 0.00219975 Jy ! Component: 2250 - total flux cleaned = 0.00212324 Jy ! Component: 2300 - total flux cleaned = 0.00212323 Jy ! Component: 2350 - total flux cleaned = 0.00204677 Jy ! Component: 2400 - total flux cleaned = 0.00200841 Jy ! Component: 2450 - total flux cleaned = 0.00200814 Jy ! Component: 2500 - total flux cleaned = 0.00196918 Jy ! Component: 2550 - total flux cleaned = 0.0019693 Jy ! Component: 2600 - total flux cleaned = 0.00196929 Jy ! Component: 2650 - total flux cleaned = 0.0019296 Jy ! Component: 2700 - total flux cleaned = 0.00192994 Jy ! Component: 2750 - total flux cleaned = 0.00188933 Jy ! Component: 2800 - total flux cleaned = 0.00184759 Jy ! Component: 2850 - total flux cleaned = 0.00188976 Jy ! Component: 2900 - total flux cleaned = 0.00189051 Jy ! Component: 2950 - total flux cleaned = 0.0018902 Jy ! Component: 3000 - total flux cleaned = 0.00189057 Jy ! Component: 3050 - total flux cleaned = 0.0018906 Jy ! Component: 3100 - total flux cleaned = 0.0018912 Jy ! Component: 3150 - total flux cleaned = 0.00198281 Jy ! Component: 3200 - total flux cleaned = 0.00198345 Jy ! Component: 3250 - total flux cleaned = 0.00203076 Jy ! Component: 3300 - total flux cleaned = 0.00203092 Jy ! Component: 3350 - total flux cleaned = 0.00208023 Jy ! Component: 3400 - total flux cleaned = 0.00213003 Jy ! Component: 3450 - total flux cleaned = 0.00218035 Jy ! Component: 3500 - total flux cleaned = 0.00218025 Jy ! Component: 3550 - total flux cleaned = 0.00223246 Jy ! Component: 3600 - total flux cleaned = 0.00217927 Jy ! Component: 3650 - total flux cleaned = 0.00223234 Jy ! Component: 3700 - total flux cleaned = 0.00217785 Jy ! Component: 3750 - total flux cleaned = 0.00223383 Jy ! Component: 3800 - total flux cleaned = 0.00217729 Jy ! Component: 3850 - total flux cleaned = 0.00223487 Jy ! Component: 3900 - total flux cleaned = 0.00217578 Jy ! Component: 3950 - total flux cleaned = 0.0022358 Jy ! Component: 4000 - total flux cleaned = 0.00217497 Jy ! Component: 4050 - total flux cleaned = 0.0022378 Jy ! Total flux subtracted in 4096 components = 0.00217469 Jy ! Clean residual min=-0.003534 max=0.003662 Jy/beam ! Clean residual mean=-0.000052 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.377692 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 367 components and 0.377692 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0627-3529_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.427 x 12.93 at -9.267 degrees (North through East) ! Clean map min=-0.0078729 max=0.30893 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0627-3529_S_map.fits wmodel /image_prod/ug002_uva//J0627-3529_S_map.mod ! Writing 367 model components to file: /image_prod/ug002_uva//J0627-3529_S_map.mod wobs /image_prod/ug002_uva//J0627-3529_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0627-3529_S_uvs.fits wwins /image_prod/ug002_uva//J0627-3529_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0627-3529_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.308935 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000841078 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.816754 0.816754 1.63351 3.26701 6.53403 13.0681 26.1361 52.2722 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.308 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 367.307 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0627-3529_S_dfm.log closed on Wed Mar 4 21:19:49 2020