! Started logfile: /image_prod/ug002_uva//J0627+0324_S_dfm.log on Wed Mar  4 21:19:36 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0627+0324_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0627+0324_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.777037 visibilities/baseline/integration-bin.
! Found source: J0627+0324
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 6294 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0627+0324_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015643Jy  sigma=8.312087
! Fit after  self-cal, rms=0.857185Jy  sigma=7.033277
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.212 mas, bmaj=13.81 mas, bpa=-16.72 degrees
! Estimated noise=1.60695 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107679 Jy
! Component: 100  -  total flux cleaned = 0.138963 Jy
! Total flux subtracted in 100 components = 0.138963 Jy
! Clean residual min=-0.005704 max=0.013071 Jy/beam
! Clean residual mean=0.000032 rms=0.001752 Jy/beam
! Combined flux in latest and established models = 0.138963 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.138963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068053Jy  sigma=0.488638
! Fit after  self-cal, rms=0.068026Jy  sigma=0.488404
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139977 Jy
! Component: 100  -  total flux cleaned = 0.0216184 Jy
! Total flux subtracted in 100 components = 0.0216184 Jy
! Clean residual min=-0.004124 max=0.006123 Jy/beam
! Clean residual mean=0.000012 rms=0.001101 Jy/beam
! Combined flux in latest and established models = 0.160581 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.160581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064946Jy  sigma=0.456014
! Fit after  self-cal, rms=0.064915Jy  sigma=0.455755
! Inverting map 
! Added new window around map position (-6.5, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00588768 Jy
! Component: 100  -  total flux cleaned = 0.00769348 Jy
! Total flux subtracted in 100 components = 0.00769348 Jy
! Clean residual min=-0.003435 max=0.004014 Jy/beam
! Clean residual mean=0.000005 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.168275 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 40 components and 0.168275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064399Jy  sigma=0.450920
! Fit after  self-cal, rms=0.064326Jy  sigma=0.450474
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.921 mas, bmaj=13.74 mas, bpa=-16.19 degrees
! Estimated noise=1.12778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194736 Jy
! Component: 100  -  total flux cleaned = 0.00196041 Jy
! Component: 150  -  total flux cleaned = 0.00183355 Jy
! Component: 200  -  total flux cleaned = 0.00183243 Jy
! Total flux subtracted in 200 components = 0.00183243 Jy
! Clean residual min=-0.003018 max=0.003753 Jy/beam
! Clean residual mean=0.000002 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.170107 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 55 components and 0.170107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064112Jy  sigma=0.448736
! Fit after  self-cal, rms=0.064082Jy  sigma=0.448612
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.921 x 13.74 at -16.19 degrees (North through East)
! Clean map  min=-0.0030479  max=0.14054 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.04     KP        1.00     
!   LA        1.06     MK        1.05     NL        1.02     OV        1.01     
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        1.01     KP        0.98     
!   LA        1.07     MK        0.99     NL        0.99     OV        0.91     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        0.99     KP        0.99     
!   LA        1.06     MK        1.01     NL        1.00     OV        1.02     
!   PT        1.01     
! 
! 
! Fit before self-cal, rms=0.064082Jy  sigma=0.448612
! Fit after  self-cal, rms=0.062870Jy  sigma=0.443480
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.945 mas, bmaj=13.56 mas, bpa=-16.11 degrees
! Estimated noise=1.12194 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148296 Jy
! Component: 100  -  total flux cleaned = 0.00158626 Jy
! Component: 150  -  total flux cleaned = 0.00162734 Jy
! Component: 200  -  total flux cleaned = 0.00165983 Jy
! Total flux subtracted in 200 components = 0.00165983 Jy
! Clean residual min=-0.003051 max=0.002919 Jy/beam
! Clean residual mean=0.000007 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.171767 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 79 components and 0.171767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062779Jy  sigma=0.442693
! Fit after  self-cal, rms=0.062782Jy  sigma=0.442574
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062782Jy  sigma=0.442574
! Fit after  self-cal, rms=0.063656Jy  sigma=0.439324
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.934 mas, bmaj=13.53 mas, bpa=-16.02 degrees
! Estimated noise=1.12221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127101 Jy
! Component: 100  -  total flux cleaned = 0.00160235 Jy
! Component: 150  -  total flux cleaned = 0.00169807 Jy
! Component: 200  -  total flux cleaned = 0.00172198 Jy
! Total flux subtracted in 200 components = 0.00172198 Jy
! Clean residual min=-0.002354 max=0.002204 Jy/beam
! Clean residual mean=0.000006 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.173489 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 96 components and 0.173489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063599Jy  sigma=0.438908
! Fit after  self-cal, rms=0.063623Jy  sigma=0.438854
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.02576e-05 Jy
! Component: 100  -  total flux cleaned = 9.2646e-05 Jy
! Component: 150  -  total flux cleaned = 7.16419e-05 Jy
! Component: 200  -  total flux cleaned = 7.15996e-05 Jy
! Total flux subtracted in 200 components = 7.15996e-05 Jy
! Clean residual min=-0.002327 max=0.002223 Jy/beam
! Clean residual mean=0.000006 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.17356 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 104 components and 0.17356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063608Jy  sigma=0.438744
! Fit after  self-cal, rms=0.063606Jy  sigma=0.438737
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063606Jy  sigma=0.438737
! Fit after  self-cal, rms=0.063652Jy  sigma=0.438598
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.932 mas, bmaj=13.49 mas, bpa=-15.99 degrees
! Estimated noise=1.12209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000941569 Jy
! Component: 100  -  total flux cleaned = 0.00120782 Jy
! Component: 150  -  total flux cleaned = 0.00131332 Jy
! Component: 200  -  total flux cleaned = 0.00135035 Jy
! Total flux subtracted in 200 components = 0.00135035 Jy
! Clean residual min=-0.002199 max=0.002123 Jy/beam
! Clean residual mean=0.000004 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.174911 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 120 components and 0.174911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063631Jy  sigma=0.438441
! Fit after  self-cal, rms=0.063633Jy  sigma=0.438436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.85351e-05 Jy
! Component: 100  -  total flux cleaned = 7.45625e-05 Jy
! Component: 150  -  total flux cleaned = 7.49191e-05 Jy
! Component: 200  -  total flux cleaned = 8.82415e-05 Jy
! Total flux subtracted in 200 components = 8.82415e-05 Jy
! Clean residual min=-0.002185 max=0.002107 Jy/beam
! Clean residual mean=0.000004 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.174999 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 129 components and 0.174999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063625Jy  sigma=0.438380
! Fit after  self-cal, rms=0.063625Jy  sigma=0.438378
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063625Jy  sigma=0.438378
! Fit after  self-cal, rms=0.063615Jy  sigma=0.438320
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.367 mas, bmaj=13.77 mas, bpa=-9.876 degrees
! Estimated noise=1.27632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000869257 Jy
! Component: 100  -  total flux cleaned = 0.00113412 Jy
! Component: 150  -  total flux cleaned = 0.00123918 Jy
! Component: 200  -  total flux cleaned = 0.00130951 Jy
! Total flux subtracted in 200 components = 0.00130951 Jy
! Clean residual min=-0.002259 max=0.002596 Jy/beam
! Clean residual mean=0.000006 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.176309 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 140 components and 0.176309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063606Jy  sigma=0.438274
! Fit after  self-cal, rms=0.063605Jy  sigma=0.438265
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.53682e-05 Jy
! Component: 100  -  total flux cleaned = 8.47376e-05 Jy
! Component: 150  -  total flux cleaned = 0.000101553 Jy
! Component: 200  -  total flux cleaned = 0.000124614 Jy
! Total flux subtracted in 200 components = 0.000124614 Jy
! Clean residual min=-0.002268 max=0.002612 Jy/beam
! Clean residual mean=0.000006 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.176433 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 154 components and 0.176433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063603Jy  sigma=0.438265
! Fit after  self-cal, rms=0.063602Jy  sigma=0.438263
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.932 mas, bmaj=13.45 mas, bpa=-15.96 degrees
! Estimated noise=1.12236 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.932 x 13.45 at -15.96 degrees (North through East)
! Clean map  min=-0.0020775  max=0.14017 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.226 mas, bmaj=13.53 mas, bpa=-16.55 degrees
! Estimated noise=1.60187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107141 Jy
! Component: 100  -  total flux cleaned = 0.138358 Jy
! Component: 150  -  total flux cleaned = 0.153367 Jy
! Component: 200  -  total flux cleaned = 0.16155 Jy
! Total flux subtracted in 200 components = 0.16155 Jy
! Clean residual min=-0.003089 max=0.004047 Jy/beam
! Clean residual mean=0.000013 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.16155 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.16155 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.932 mas, bmaj=13.45 mas, bpa=-15.96 degrees
! Estimated noise=1.12236 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00592455 Jy
! Component: 100  -  total flux cleaned = 0.00951354 Jy
! Component: 150  -  total flux cleaned = 0.0118658 Jy
! Component: 200  -  total flux cleaned = 0.0128677 Jy
! Total flux subtracted in 200 components = 0.0128677 Jy
! Clean residual min=-0.002378 max=0.002350 Jy/beam
! Clean residual mean=0.000008 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.174418 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 64 components and 0.174418 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.367 mas, bmaj=13.77 mas, bpa=-9.876 degrees
! Estimated noise=1.27632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112739 Jy
! Component: 100  -  total flux cleaned = 0.00138615 Jy
! Component: 150  -  total flux cleaned = 0.00158483 Jy
! Component: 200  -  total flux cleaned = 0.00174979 Jy
! Total flux subtracted in 200 components = 0.00174979 Jy
! Clean residual min=-0.002219 max=0.002631 Jy/beam
! Clean residual mean=0.000008 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.176168 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158951 Jy
! Component: 100  -  total flux cleaned = 0.000271636 Jy
! Component: 150  -  total flux cleaned = 0.000383381 Jy
! Component: 200  -  total flux cleaned = 0.00046644 Jy
! Total flux subtracted in 200 components = 0.00046644 Jy
! Clean residual min=-0.002201 max=0.002650 Jy/beam
! Clean residual mean=0.000006 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.176634 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 110 components and 0.176634 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.932 mas, bmaj=13.45 mas, bpa=-15.96 degrees
! Estimated noise=1.12236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012727 Jy
! Component: 100  -  total flux cleaned = 4.38911e-05 Jy
! Component: 150  -  total flux cleaned = 0.000171267 Jy
! Component: 200  -  total flux cleaned = 0.000229824 Jy
! Total flux subtracted in 200 components = 0.000229824 Jy
! Clean residual min=-0.002223 max=0.002078 Jy/beam
! Clean residual mean=0.000004 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.176864 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 124 components and 0.176864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063633Jy  sigma=0.438438
! Fit after  self-cal, rms=0.063636Jy  sigma=0.438421
wmodel J0627+0324_S_map.mod
! Writing 124 model components to file: J0627+0324_S_map.mod
wobs   J0627+0324_S_uvs.fits
! Writing UV FITS file: J0627+0324_S_uvs.fits
wwins  J0627+0324_S_map.win
! wwins: Wrote 2 windows to J0627+0324_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.48106e-05 Jy
! Component: 100  -  total flux cleaned = 0.000169832 Jy
! Component: 150  -  total flux cleaned = 0.000415723 Jy
! Component: 200  -  total flux cleaned = 0.000747851 Jy
! Component: 250  -  total flux cleaned = 0.00100088 Jy
! Component: 300  -  total flux cleaned = 0.00124382 Jy
! Component: 350  -  total flux cleaned = 0.00150629 Jy
! Component: 400  -  total flux cleaned = 0.00173172 Jy
! Component: 450  -  total flux cleaned = 0.00192322 Jy
! Component: 500  -  total flux cleaned = 0.00208194 Jy
! Component: 550  -  total flux cleaned = 0.00226113 Jy
! Component: 600  -  total flux cleaned = 0.00238559 Jy
! Component: 650  -  total flux cleaned = 0.00250654 Jy
! Component: 700  -  total flux cleaned = 0.00267126 Jy
! Component: 750  -  total flux cleaned = 0.00276308 Jy
! Component: 800  -  total flux cleaned = 0.00283107 Jy
! Component: 850  -  total flux cleaned = 0.00291918 Jy
! Component: 900  -  total flux cleaned = 0.00300484 Jy
! Component: 950  -  total flux cleaned = 0.00302544 Jy
! Component: 1000  -  total flux cleaned = 0.00306661 Jy
! Component: 1050  -  total flux cleaned = 0.00314686 Jy
! Component: 1100  -  total flux cleaned = 0.00320537 Jy
! Component: 1150  -  total flux cleaned = 0.00322453 Jy
! Component: 1200  -  total flux cleaned = 0.00322469 Jy
! Component: 1250  -  total flux cleaned = 0.00326166 Jy
! Component: 1300  -  total flux cleaned = 0.0032618 Jy
! Component: 1350  -  total flux cleaned = 0.00324415 Jy
! Component: 1400  -  total flux cleaned = 0.00315687 Jy
! Component: 1450  -  total flux cleaned = 0.00317406 Jy
! Component: 1500  -  total flux cleaned = 0.00308891 Jy
! Component: 1550  -  total flux cleaned = 0.0030887 Jy
! Component: 1600  -  total flux cleaned = 0.00302244 Jy
! Component: 1650  -  total flux cleaned = 0.00297399 Jy
! Component: 1700  -  total flux cleaned = 0.00302139 Jy
! Component: 1750  -  total flux cleaned = 0.00297452 Jy
! Component: 1800  -  total flux cleaned = 0.00295946 Jy
! Component: 1850  -  total flux cleaned = 0.00302074 Jy
! Component: 1900  -  total flux cleaned = 0.0029604 Jy
! Component: 1950  -  total flux cleaned = 0.00299007 Jy
! Component: 2000  -  total flux cleaned = 0.00298991 Jy
! Component: 2050  -  total flux cleaned = 0.00294657 Jy
! Component: 2100  -  total flux cleaned = 0.00297544 Jy
! Component: 2150  -  total flux cleaned = 0.00296126 Jy
! Component: 2200  -  total flux cleaned = 0.00294742 Jy
! Component: 2250  -  total flux cleaned = 0.00290604 Jy
! Component: 2300  -  total flux cleaned = 0.00289258 Jy
! Component: 2350  -  total flux cleaned = 0.00291959 Jy
! Component: 2400  -  total flux cleaned = 0.00289304 Jy
! Component: 2450  -  total flux cleaned = 0.00289323 Jy
! Component: 2500  -  total flux cleaned = 0.00289308 Jy
! Component: 2550  -  total flux cleaned = 0.00286758 Jy
! Component: 2600  -  total flux cleaned = 0.00286787 Jy
! Component: 2650  -  total flux cleaned = 0.002868 Jy
! Component: 2700  -  total flux cleaned = 0.00288037 Jy
! Component: 2750  -  total flux cleaned = 0.00289265 Jy
! Component: 2800  -  total flux cleaned = 0.00285637 Jy
! Component: 2850  -  total flux cleaned = 0.00291645 Jy
! Component: 2900  -  total flux cleaned = 0.00296398 Jy
! Component: 2950  -  total flux cleaned = 0.00294039 Jy
! Component: 3000  -  total flux cleaned = 0.00297523 Jy
! Component: 3050  -  total flux cleaned = 0.00297523 Jy
! Component: 3100  -  total flux cleaned = 0.0029979 Jy
! Component: 3150  -  total flux cleaned = 0.00300915 Jy
! Component: 3200  -  total flux cleaned = 0.00304267 Jy
! Component: 3250  -  total flux cleaned = 0.0030095 Jy
! Component: 3300  -  total flux cleaned = 0.0030537 Jy
! Component: 3350  -  total flux cleaned = 0.00306471 Jy
! Component: 3400  -  total flux cleaned = 0.00307546 Jy
! Component: 3450  -  total flux cleaned = 0.0031504 Jy
! Component: 3500  -  total flux cleaned = 0.00310783 Jy
! Component: 3550  -  total flux cleaned = 0.0030975 Jy
! Component: 3600  -  total flux cleaned = 0.00311858 Jy
! Component: 3650  -  total flux cleaned = 0.00311865 Jy
! Component: 3700  -  total flux cleaned = 0.00311861 Jy
! Component: 3750  -  total flux cleaned = 0.00313902 Jy
! Component: 3800  -  total flux cleaned = 0.00312886 Jy
! Component: 3850  -  total flux cleaned = 0.00310887 Jy
! Component: 3900  -  total flux cleaned = 0.00306903 Jy
! Component: 3950  -  total flux cleaned = 0.00306913 Jy
! Component: 4000  -  total flux cleaned = 0.00309853 Jy
! Component: 4050  -  total flux cleaned = 0.003079 Jy
! Total flux subtracted in 4096 components = 0.00308867 Jy
! Clean residual min=-0.000612 max=0.000557 Jy/beam
! Clean residual mean=0.000001 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.179953 Jy
keep
! Adding 324 model components to the UV plane model.
! The established model now contains 448 components and 0.179953 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0627+0324_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.932 x 13.45 at -15.96 degrees (North through East)
! Clean map  min=-0.0015588  max=0.14025 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0627+0324_S_map.fits
wmodel /image_prod/ug002_uva//J0627+0324_S_map.mod
! Writing 448 model components to file: /image_prod/ug002_uva//J0627+0324_S_map.mod
wobs   /image_prod/ug002_uva//J0627+0324_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0627+0324_S_uvs.fits
wwins  /image_prod/ug002_uva//J0627+0324_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0627+0324_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.140251 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000187008 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.400014 0.400014 0.800027 1.60005 3.20011 6.40022 12.8004 25.6009 51.2017
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.14 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  749.974 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0627+0324_S_dfm.log closed on Wed Mar  4 21:19:39 2020