! Started logfile: /image_prod/ug002_uva//J0623+2241_S_dfm.log on Wed Mar 4 21:17:53 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0623+2241_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0623+2241_S_uva.fits ! AN table 1: 114 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.700585 visibilities/baseline/integration-bin. ! Found source: J0623+2241 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 36 lines of history. ! ! Reading 3594 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0623+2241_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998547Jy sigma=9.192696 ! Fit after self-cal, rms=0.956684Jy sigma=8.841872 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.125 mas, bmaj=9.229 mas, bpa=-13.27 degrees ! Estimated noise=2.26188 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0340509 Jy ! Component: 100 - total flux cleaned = 0.0484286 Jy ! Total flux subtracted in 100 components = 0.0484286 Jy ! Clean residual min=-0.010078 max=0.008864 Jy/beam ! Clean residual mean=-0.000009 rms=0.003107 Jy/beam ! Combined flux in latest and established models = 0.0484286 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.0484286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057363Jy sigma=0.518455 ! Fit after self-cal, rms=0.056340Jy sigma=0.510620 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.858 mas, bmaj=9.27 mas, bpa=-8.684 degrees ! Estimated noise=1.33066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146483 Jy ! Component: 100 - total flux cleaned = 0.0252819 Jy ! Component: 150 - total flux cleaned = 0.0333891 Jy ! Component: 200 - total flux cleaned = 0.0397695 Jy ! Total flux subtracted in 200 components = 0.0397695 Jy ! Clean residual min=-0.008311 max=0.006648 Jy/beam ! Clean residual mean=-0.000008 rms=0.002261 Jy/beam ! Combined flux in latest and established models = 0.0881981 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 122 components and 0.0881981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.051947Jy sigma=0.450581 ! Fit after self-cal, rms=0.051453Jy sigma=0.446993 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.858 x 9.27 at -8.684 degrees (North through East) ! Clean map min=-0.0078837 max=0.047662 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 0.90 KP 0.65 ! NL 1.53 OV 1.26 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 1.07 KP 0.76 ! NL 1.36 OV 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.88 KP 0.70 ! NL 1.04 OV 1.15 ! ! ! Fit before self-cal, rms=0.051453Jy sigma=0.446993 ! Fit after self-cal, rms=0.054790Jy sigma=0.422871 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.902 mas, bmaj=9.283 mas, bpa=-11.44 degrees ! Estimated noise=1.28205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217496 Jy ! Component: 100 - total flux cleaned = 0.0031757 Jy ! Component: 150 - total flux cleaned = 0.00336678 Jy ! Component: 200 - total flux cleaned = 0.00346246 Jy ! Total flux subtracted in 200 components = 0.00346246 Jy ! Clean residual min=-0.004796 max=0.004227 Jy/beam ! Clean residual mean=-0.000000 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.0916606 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 130 components and 0.0916606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054709Jy sigma=0.421606 ! Fit after self-cal, rms=0.055815Jy sigma=0.418143 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055815Jy sigma=0.418143 ! Fit after self-cal, rms=0.058088Jy sigma=0.413350 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.851 mas, bmaj=9.137 mas, bpa=-11.73 degrees ! Estimated noise=1.2772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129816 Jy ! Component: 100 - total flux cleaned = 0.00165613 Jy ! Component: 150 - total flux cleaned = 0.00181476 Jy ! Component: 200 - total flux cleaned = 0.00193009 Jy ! Total flux subtracted in 200 components = 0.00193009 Jy ! Clean residual min=-0.003191 max=0.003057 Jy/beam ! Clean residual mean=-0.000002 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.0935907 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 134 components and 0.0935907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058067Jy sigma=0.412766 ! Fit after self-cal, rms=0.058530Jy sigma=0.412218 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399492 Jy ! Component: 100 - total flux cleaned = 0.000627739 Jy ! Component: 150 - total flux cleaned = 0.000769749 Jy ! Component: 200 - total flux cleaned = 0.000830983 Jy ! Total flux subtracted in 200 components = 0.000830983 Jy ! Clean residual min=-0.002853 max=0.002949 Jy/beam ! Clean residual mean=-0.000001 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.0944216 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 135 components and 0.0944216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058515Jy sigma=0.411911 ! Fit after self-cal, rms=0.058538Jy sigma=0.411845 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058538Jy sigma=0.411845 ! Fit after self-cal, rms=0.058961Jy sigma=0.411479 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.762 mas, bmaj=9.008 mas, bpa=-11.37 degrees ! Estimated noise=1.24755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757096 Jy ! Component: 100 - total flux cleaned = 0.00108412 Jy ! Component: 150 - total flux cleaned = 0.00125095 Jy ! Component: 200 - total flux cleaned = 0.00137379 Jy ! Total flux subtracted in 200 components = 0.00137379 Jy ! Clean residual min=-0.002758 max=0.002677 Jy/beam ! Clean residual mean=-0.000001 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0957954 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 141 components and 0.0957954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058946Jy sigma=0.411039 ! Fit after self-cal, rms=0.059091Jy sigma=0.410924 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368852 Jy ! Component: 100 - total flux cleaned = 0.0005608 Jy ! Component: 150 - total flux cleaned = 0.00066212 Jy ! Component: 200 - total flux cleaned = 0.000732171 Jy ! Total flux subtracted in 200 components = 0.000732171 Jy ! Clean residual min=-0.002700 max=0.002615 Jy/beam ! Clean residual mean=-0.000001 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0965276 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 142 components and 0.0965276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059080Jy sigma=0.410699 ! Fit after self-cal, rms=0.059097Jy sigma=0.410654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059097Jy sigma=0.410654 ! Fit after self-cal, rms=0.058940Jy sigma=0.410427 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.477 mas, bmaj=9.661 mas, bpa=9.847 degrees ! Estimated noise=1.30357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112165 Jy ! Component: 100 - total flux cleaned = 0.00133535 Jy ! Component: 150 - total flux cleaned = 0.00149514 Jy ! Component: 200 - total flux cleaned = 0.00156484 Jy ! Total flux subtracted in 200 components = 0.00156484 Jy ! Clean residual min=-0.002600 max=0.002365 Jy/beam ! Clean residual mean=-0.000002 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0980924 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 150 components and 0.0980924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058933Jy sigma=0.410128 ! Fit after self-cal, rms=0.058999Jy sigma=0.410000 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270811 Jy ! Component: 100 - total flux cleaned = 0.000366764 Jy ! Component: 150 - total flux cleaned = 0.000433654 Jy ! Component: 200 - total flux cleaned = 0.000494043 Jy ! Total flux subtracted in 200 components = 0.000494043 Jy ! Clean residual min=-0.002612 max=0.002408 Jy/beam ! Clean residual mean=-0.000002 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0985865 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 153 components and 0.0985865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058991Jy sigma=0.409886 ! Fit after self-cal, rms=0.059004Jy sigma=0.409850 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=5.7 mas, bmaj=8.896 mas, bpa=-10.89 degrees ! Estimated noise=1.21875 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.7 x 8.896 at -10.89 degrees (North through East) ! Clean map min=-0.0026118 max=0.042095 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.925 mas, bmaj=8.815 mas, bpa=-15.39 degrees ! Estimated noise=2.03136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304807 Jy ! Component: 100 - total flux cleaned = 0.0458609 Jy ! Component: 150 - total flux cleaned = 0.0567038 Jy ! Component: 200 - total flux cleaned = 0.0645391 Jy ! Total flux subtracted in 200 components = 0.0645391 Jy ! Clean residual min=-0.006570 max=0.005215 Jy/beam ! Clean residual mean=-0.000002 rms=0.001736 Jy/beam ! Combined flux in latest and established models = 0.0645391 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.0645391 Jy ! Inverting map and beam ! Estimated beam: bmin=5.7 mas, bmaj=8.896 mas, bpa=-10.89 degrees ! Estimated noise=1.21875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00823103 Jy ! Component: 100 - total flux cleaned = 0.0136367 Jy ! Component: 150 - total flux cleaned = 0.0175134 Jy ! Component: 200 - total flux cleaned = 0.0203975 Jy ! Total flux subtracted in 200 components = 0.0203975 Jy ! Clean residual min=-0.004518 max=0.003035 Jy/beam ! Clean residual mean=-0.000003 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.0849366 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 95 components and 0.0849366 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.477 mas, bmaj=9.661 mas, bpa=9.847 degrees ! Estimated noise=1.30357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334821 Jy ! Component: 100 - total flux cleaned = 0.00568591 Jy ! Component: 150 - total flux cleaned = 0.00739631 Jy ! Component: 200 - total flux cleaned = 0.00866038 Jy ! Total flux subtracted in 200 components = 0.00866038 Jy ! Clean residual min=-0.003656 max=0.002408 Jy/beam ! Clean residual mean=-0.000003 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.093597 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000938654 Jy ! Component: 100 - total flux cleaned = 0.00163866 Jy ! Component: 150 - total flux cleaned = 0.00190999 Jy ! Component: 200 - total flux cleaned = 0.00213238 Jy ! Total flux subtracted in 200 components = 0.00213238 Jy ! Clean residual min=-0.003247 max=0.002395 Jy/beam ! Clean residual mean=-0.000003 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0957294 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 118 components and 0.0957294 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.7 mas, bmaj=8.896 mas, bpa=-10.89 degrees ! Estimated noise=1.21875 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000803675 Jy ! Component: 100 - total flux cleaned = -0.000937674 Jy ! Component: 150 - total flux cleaned = -0.00102403 Jy ! Component: 200 - total flux cleaned = -0.00102445 Jy ! Total flux subtracted in 200 components = -0.00102445 Jy ! Clean residual min=-0.003393 max=0.002697 Jy/beam ! Clean residual mean=-0.000003 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.0947049 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 127 components and 0.094705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059100Jy sigma=0.411189 ! Fit after self-cal, rms=0.059015Jy sigma=0.410204 wmodel J0623+2241_S_map.mod ! Writing 127 model components to file: J0623+2241_S_map.mod wobs J0623+2241_S_uvs.fits ! Writing UV FITS file: J0623+2241_S_uvs.fits wwins J0623+2241_S_map.win ! wwins: Wrote 1 windows to J0623+2241_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.001042 Jy ! Component: 100 - total flux cleaned = -0.00160387 Jy ! Component: 150 - total flux cleaned = -0.00192719 Jy ! Component: 200 - total flux cleaned = -0.00205931 Jy ! Component: 250 - total flux cleaned = -0.00218144 Jy ! Component: 300 - total flux cleaned = -0.00237989 Jy ! Component: 350 - total flux cleaned = -0.00251216 Jy ! Component: 400 - total flux cleaned = -0.00266337 Jy ! Component: 450 - total flux cleaned = -0.00278451 Jy ! Component: 500 - total flux cleaned = -0.00292149 Jy ! Component: 550 - total flux cleaned = -0.002965 Jy ! Component: 600 - total flux cleaned = -0.00304904 Jy ! Component: 650 - total flux cleaned = -0.00312982 Jy ! Component: 700 - total flux cleaned = -0.00322639 Jy ! Component: 750 - total flux cleaned = -0.00328186 Jy ! Component: 800 - total flux cleaned = -0.00326345 Jy ! Component: 850 - total flux cleaned = -0.00319441 Jy ! Component: 900 - total flux cleaned = -0.0031608 Jy ! Component: 950 - total flux cleaned = -0.00304838 Jy ! Component: 1000 - total flux cleaned = -0.00304848 Jy ! Component: 1050 - total flux cleaned = -0.00300254 Jy ! Component: 1100 - total flux cleaned = -0.00292763 Jy ! Component: 1150 - total flux cleaned = -0.00283968 Jy ! Component: 1200 - total flux cleaned = -0.002811 Jy ! Component: 1250 - total flux cleaned = -0.00275477 Jy ! Component: 1300 - total flux cleaned = -0.00269968 Jy ! Component: 1350 - total flux cleaned = -0.002659 Jy ! Component: 1400 - total flux cleaned = -0.00257946 Jy ! Component: 1450 - total flux cleaned = -0.00251465 Jy ! Component: 1500 - total flux cleaned = -0.00246371 Jy ! Component: 1550 - total flux cleaned = -0.00241341 Jy ! Component: 1600 - total flux cleaned = -0.00236383 Jy ! Component: 1650 - total flux cleaned = -0.00229059 Jy ! Component: 1700 - total flux cleaned = -0.00225436 Jy ! Component: 1750 - total flux cleaned = -0.00219506 Jy ! Component: 1800 - total flux cleaned = -0.00218338 Jy ! Component: 1850 - total flux cleaned = -0.00214859 Jy ! Component: 1900 - total flux cleaned = -0.00213703 Jy ! Component: 1950 - total flux cleaned = -0.00211428 Jy ! Component: 2000 - total flux cleaned = -0.00214792 Jy ! Component: 2050 - total flux cleaned = -0.00217008 Jy ! Component: 2100 - total flux cleaned = -0.00218114 Jy ! Component: 2150 - total flux cleaned = -0.0022251 Jy ! Component: 2200 - total flux cleaned = -0.00227975 Jy ! Component: 2250 - total flux cleaned = -0.00232312 Jy ! Component: 2300 - total flux cleaned = -0.00236635 Jy ! Component: 2350 - total flux cleaned = -0.00243084 Jy ! Component: 2400 - total flux cleaned = -0.00246298 Jy ! Component: 2450 - total flux cleaned = -0.00251621 Jy ! Component: 2500 - total flux cleaned = -0.00256932 Jy ! Component: 2550 - total flux cleaned = -0.00262238 Jy ! Component: 2600 - total flux cleaned = -0.00266474 Jy ! Component: 2650 - total flux cleaned = -0.0027283 Jy ! Component: 2700 - total flux cleaned = -0.00277065 Jy ! Component: 2750 - total flux cleaned = -0.00279196 Jy ! Component: 2800 - total flux cleaned = -0.00281321 Jy ! Component: 2850 - total flux cleaned = -0.00283451 Jy ! Component: 2900 - total flux cleaned = -0.00287713 Jy ! Component: 2950 - total flux cleaned = -0.00291984 Jy ! Component: 3000 - total flux cleaned = -0.00293061 Jy ! Component: 3050 - total flux cleaned = -0.00294128 Jy ! Component: 3100 - total flux cleaned = -0.00296279 Jy ! Component: 3150 - total flux cleaned = -0.00299523 Jy ! Component: 3200 - total flux cleaned = -0.0030169 Jy ! Component: 3250 - total flux cleaned = -0.00302772 Jy ! Component: 3300 - total flux cleaned = -0.00306056 Jy ! Component: 3350 - total flux cleaned = -0.00310464 Jy ! Component: 3400 - total flux cleaned = -0.00311578 Jy ! Component: 3450 - total flux cleaned = -0.00314915 Jy ! Component: 3500 - total flux cleaned = -0.0031603 Jy ! Component: 3550 - total flux cleaned = -0.00317143 Jy ! Component: 3600 - total flux cleaned = -0.00319405 Jy ! Component: 3650 - total flux cleaned = -0.00321672 Jy ! Component: 3700 - total flux cleaned = -0.00322809 Jy ! Component: 3750 - total flux cleaned = -0.00323952 Jy ! Component: 3800 - total flux cleaned = -0.00327419 Jy ! Component: 3850 - total flux cleaned = -0.00328575 Jy ! Component: 3900 - total flux cleaned = -0.00334447 Jy ! Component: 3950 - total flux cleaned = -0.00333268 Jy ! Component: 4000 - total flux cleaned = -0.00336837 Jy ! Component: 4050 - total flux cleaned = -0.00339239 Jy ! Total flux subtracted in 4096 components = -0.00340435 Jy ! Clean residual min=-0.000710 max=0.000673 Jy/beam ! Clean residual mean=-0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0913006 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 386 components and 0.0913005 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0623+2241_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.7 x 8.896 at -10.89 degrees (North through East) ! Clean map min=-0.0018649 max=0.040309 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0623+2241_S_map.fits wmodel /image_prod/ug002_uva//J0623+2241_S_map.mod ! Writing 386 model components to file: /image_prod/ug002_uva//J0623+2241_S_map.mod wobs /image_prod/ug002_uva//J0623+2241_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0623+2241_S_uvs.fits wwins /image_prod/ug002_uva//J0623+2241_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0623+2241_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0403087 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000196406 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.46177 1.46177 2.92353 5.84707 11.6941 23.3883 46.7765 93.5531 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.04 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 205.231 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0623+2241_S_dfm.log closed on Wed Mar 4 21:17:57 2020