! Started logfile: /image_prod/ug002_uva//J0620-2827_X_dfm.log on Wed Mar  4 21:16:54 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0620-2827_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0620-2827_X_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.870556 visibilities/baseline/integration-bin.
! Found source: J0620-2827
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18804 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0620-2827_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.072400Jy  sigma=7.504479
! Fit after  self-cal, rms=0.651838Jy  sigma=4.467702
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6728 mas, bmaj=1.677 mas, bpa=-3.813 degrees
! Estimated noise=1.35804 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.269592 Jy
! Component: 100  -  total flux cleaned = 0.3413 Jy
! Total flux subtracted in 100 components = 0.3413 Jy
! Clean residual min=-0.017899 max=0.038922 Jy/beam
! Clean residual mean=0.000004 rms=0.004248 Jy/beam
! Combined flux in latest and established models = 0.3413 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.3413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110813Jy  sigma=0.734055
! Fit after  self-cal, rms=0.110766Jy  sigma=0.733666
! Inverting map 
! Added new window around map position (-0.8, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0360704 Jy
! Component: 100  -  total flux cleaned = 0.0546859 Jy
! Total flux subtracted in 100 components = 0.0546859 Jy
! Clean residual min=-0.014006 max=0.027846 Jy/beam
! Clean residual mean=0.000005 rms=0.003127 Jy/beam
! Combined flux in latest and established models = 0.395986 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.395986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097564Jy  sigma=0.622997
! Fit after  self-cal, rms=0.097304Jy  sigma=0.619848
! Inverting map 
! Added new window around map position (1.4, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0262741 Jy
! Component: 100  -  total flux cleaned = 0.0416181 Jy
! Total flux subtracted in 100 components = 0.0416181 Jy
! Clean residual min=-0.013283 max=0.014858 Jy/beam
! Clean residual mean=0.000002 rms=0.002401 Jy/beam
! Combined flux in latest and established models = 0.437604 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 0.437604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087358Jy  sigma=0.546870
! Fit after  self-cal, rms=0.086634Jy  sigma=0.541698
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8973 mas, bmaj=2.151 mas, bpa=-1.985 degrees
! Estimated noise=0.75966 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153076 Jy
! Component: 100  -  total flux cleaned = 0.0191574 Jy
! Component: 150  -  total flux cleaned = 0.0207256 Jy
! Component: 200  -  total flux cleaned = 0.0217804 Jy
! Total flux subtracted in 200 components = 0.0217804 Jy
! Clean residual min=-0.011646 max=0.010011 Jy/beam
! Clean residual mean=0.000001 rms=0.002303 Jy/beam
! Combined flux in latest and established models = 0.459384 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 51 components and 0.459384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083330Jy  sigma=0.520533
! Fit after  self-cal, rms=0.083078Jy  sigma=0.518468
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8973 x 2.151 at -1.985 degrees (North through East)
! Clean map  min=-0.010434  max=0.32659 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.17     KP        1.01     
!   LA        1.06     MK        1.03     NL        1.07     OV        0.93     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.92     HN        1.13     KP        1.01     
!   LA        1.06     MK        1.01     NL        1.07     OV        0.94     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        1.10     KP        1.02     
!   LA        1.08     MK        0.99     NL        1.04     OV        0.93     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        1.10     KP        1.01     
!   LA        1.05     MK        1.02     NL        1.08     OV        0.94     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.11     KP        1.03     
!   LA        1.06     MK        1.01     NL        1.05     OV        0.93     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.12     KP        1.03     
!   LA        1.08     MK        0.98     NL        1.03     OV        0.95     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.93     HN        1.10     KP        1.02     
!   LA        1.06     MK        1.00     NL        1.04     OV        0.95     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        1.13     KP        1.03     
!   LA        1.05     MK        0.99     NL        1.04     OV        0.93     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.91     HN        1.12     KP        1.02     
!   LA        1.04     MK        1.04     NL        1.05     OV        0.94     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        1.10     KP        1.02     
!   LA        1.06     MK        1.03     NL        1.03     OV        0.94     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.11     KP        1.04     
!   LA        1.08     MK        0.98     NL        1.01     OV        0.93     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.13     KP        1.01     
!   LA        1.06     MK        1.01     NL        1.04     OV        0.94     
!   PT        1.01     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.083078Jy  sigma=0.518468
! Fit after  self-cal, rms=0.080305Jy  sigma=0.486511
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8936 mas, bmaj=2.143 mas, bpa=-1.099 degrees
! Estimated noise=0.760512 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00361489 Jy
! Component: 100  -  total flux cleaned = -0.00465104 Jy
! Component: 150  -  total flux cleaned = -0.00493369 Jy
! Component: 200  -  total flux cleaned = -0.00518611 Jy
! Total flux subtracted in 200 components = -0.00518611 Jy
! Clean residual min=-0.006997 max=0.006997 Jy/beam
! Clean residual mean=-0.000005 rms=0.001488 Jy/beam
! Combined flux in latest and established models = 0.454198 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 59 components and 0.454198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079398Jy  sigma=0.481176
! Fit after  self-cal, rms=0.079352Jy  sigma=0.480643
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079352Jy  sigma=0.480643
! Fit after  self-cal, rms=0.078771Jy  sigma=0.471221
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8945 mas, bmaj=2.147 mas, bpa=-0.9087 degrees
! Estimated noise=0.760002 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00392617 Jy
! Component: 100  -  total flux cleaned = -0.00425677 Jy
! Component: 150  -  total flux cleaned = -0.00425499 Jy
! Component: 200  -  total flux cleaned = -0.0043408 Jy
! Total flux subtracted in 200 components = -0.0043408 Jy
! Clean residual min=-0.005183 max=0.006270 Jy/beam
! Clean residual mean=-0.000005 rms=0.001157 Jy/beam
! Combined flux in latest and established models = 0.449857 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 67 components and 0.449857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078354Jy  sigma=0.468865
! Fit after  self-cal, rms=0.078329Jy  sigma=0.468715
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, 9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00436027 Jy
! Component: 100  -  total flux cleaned = 0.00530588 Jy
! Component: 150  -  total flux cleaned = 0.00620753 Jy
! Component: 200  -  total flux cleaned = 0.00669871 Jy
! Total flux subtracted in 200 components = 0.00669871 Jy
! Clean residual min=-0.004787 max=0.004523 Jy/beam
! Clean residual mean=-0.000005 rms=0.001001 Jy/beam
! Combined flux in latest and established models = 0.456556 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 83 components and 0.456556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077757Jy  sigma=0.464774
! Fit after  self-cal, rms=0.077737Jy  sigma=0.464640
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077737Jy  sigma=0.464640
! Fit after  self-cal, rms=0.078242Jy  sigma=0.460286
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.894 mas, bmaj=2.148 mas, bpa=-0.8779 degrees
! Estimated noise=0.759362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00253778 Jy
! Component: 100  -  total flux cleaned = -0.00213988 Jy
! Component: 150  -  total flux cleaned = -0.00187263 Jy
! Component: 200  -  total flux cleaned = -0.00174831 Jy
! Total flux subtracted in 200 components = -0.00174831 Jy
! Clean residual min=-0.003810 max=0.004044 Jy/beam
! Clean residual mean=-0.000004 rms=0.000759 Jy/beam
! Combined flux in latest and established models = 0.454808 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.454808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078031Jy  sigma=0.459026
! Fit after  self-cal, rms=0.078036Jy  sigma=0.458972
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.8, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232062 Jy
! Component: 100  -  total flux cleaned = 0.00200373 Jy
! Component: 150  -  total flux cleaned = 0.00142695 Jy
! Component: 200  -  total flux cleaned = 0.000978247 Jy
! Total flux subtracted in 200 components = 0.000978247 Jy
! Clean residual min=-0.003469 max=0.002938 Jy/beam
! Clean residual mean=-0.000004 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.455786 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 109 components and 0.455786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077764Jy  sigma=0.457477
! Fit after  self-cal, rms=0.077746Jy  sigma=0.457327
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077746Jy  sigma=0.457327
! Fit after  self-cal, rms=0.077901Jy  sigma=0.457054
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.278 mas, bmaj=5.745 mas, bpa=-0.7072 degrees
! Estimated noise=0.93795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000398415 Jy
! Component: 100  -  total flux cleaned = -0.000786079 Jy
! Component: 150  -  total flux cleaned = -0.0010978 Jy
! Component: 200  -  total flux cleaned = -0.00131992 Jy
! Total flux subtracted in 200 components = -0.00131992 Jy
! Clean residual min=-0.003909 max=0.002994 Jy/beam
! Clean residual mean=-0.000006 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.454466 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 120 components and 0.454466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077803Jy  sigma=0.456812
! Fit after  self-cal, rms=0.077800Jy  sigma=0.456761
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000177861 Jy
! Component: 100  -  total flux cleaned = -1.93292e-05 Jy
! Component: 150  -  total flux cleaned = -0.000135272 Jy
! Component: 200  -  total flux cleaned = -0.000240516 Jy
! Total flux subtracted in 200 components = -0.000240516 Jy
! Clean residual min=-0.004011 max=0.003075 Jy/beam
! Clean residual mean=-0.000006 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.454226 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 125 components and 0.454226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077762Jy  sigma=0.456746
! Fit after  self-cal, rms=0.077757Jy  sigma=0.456717
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8934 mas, bmaj=2.147 mas, bpa=-0.8033 degrees
! Estimated noise=0.75886 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8934 x 2.147 at -0.8033 degrees (North through East)
! Clean map  min=-0.0039482  max=0.33092 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6689 mas, bmaj=1.671 mas, bpa=-2.476 degrees
! Estimated noise=1.35037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.267819 Jy
! Component: 100  -  total flux cleaned = 0.336126 Jy
! Component: 150  -  total flux cleaned = 0.369348 Jy
! Component: 200  -  total flux cleaned = 0.3918 Jy
! Total flux subtracted in 200 components = 0.3918 Jy
! Clean residual min=-0.007164 max=0.012453 Jy/beam
! Clean residual mean=0.000001 rms=0.001802 Jy/beam
! Combined flux in latest and established models = 0.3918 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.3918 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8934 mas, bmaj=2.147 mas, bpa=-0.8033 degrees
! Estimated noise=0.75886 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233729 Jy
! Component: 100  -  total flux cleaned = 0.0362405 Jy
! Component: 150  -  total flux cleaned = 0.0445785 Jy
! Component: 200  -  total flux cleaned = 0.0506025 Jy
! Total flux subtracted in 200 components = 0.0506025 Jy
! Clean residual min=-0.004298 max=0.006114 Jy/beam
! Clean residual mean=-0.000003 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.442403 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 48 components and 0.442402 Jy
! Inverting map 
! Added new window around map position (-1.8, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0056277 Jy
! Component: 100  -  total flux cleaned = 0.0092901 Jy
! Component: 150  -  total flux cleaned = 0.010587 Jy
! Component: 200  -  total flux cleaned = 0.0112986 Jy
! Total flux subtracted in 200 components = 0.0112986 Jy
! Clean residual min=-0.003635 max=0.002857 Jy/beam
! Clean residual mean=-0.000003 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.453701 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 74 components and 0.453701 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.278 mas, bmaj=5.745 mas, bpa=-0.7072 degrees
! Estimated noise=0.93795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177538 Jy
! Component: 100  -  total flux cleaned = 0.00210366 Jy
! Component: 150  -  total flux cleaned = 0.00223855 Jy
! Component: 200  -  total flux cleaned = 0.00211822 Jy
! Total flux subtracted in 200 components = 0.00211822 Jy
! Clean residual min=-0.003621 max=0.002847 Jy/beam
! Clean residual mean=-0.000004 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.455819 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000112121 Jy
! Component: 100  -  total flux cleaned = -0.000266416 Jy
! Component: 150  -  total flux cleaned = -0.000362049 Jy
! Component: 200  -  total flux cleaned = -0.000494517 Jy
! Total flux subtracted in 200 components = -0.000494517 Jy
! Clean residual min=-0.003495 max=0.002801 Jy/beam
! Clean residual mean=-0.000004 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.455325 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 97 components and 0.455325 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8934 mas, bmaj=2.147 mas, bpa=-0.8033 degrees
! Estimated noise=0.75886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000656997 Jy
! Component: 100  -  total flux cleaned = 0.000661784 Jy
! Component: 150  -  total flux cleaned = 0.000662218 Jy
! Component: 200  -  total flux cleaned = 0.000711758 Jy
! Total flux subtracted in 200 components = 0.000711758 Jy
! Clean residual min=-0.002866 max=0.002492 Jy/beam
! Clean residual mean=-0.000003 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.456036 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 116 components and 0.456036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077628Jy  sigma=0.455829
! Fit after  self-cal, rms=0.077596Jy  sigma=0.455683
wmodel J0620-2827_X_map.mod
! Writing 116 model components to file: J0620-2827_X_map.mod
wobs   J0620-2827_X_uvs.fits
! Writing UV FITS file: J0620-2827_X_uvs.fits
wwins  J0620-2827_X_map.win
! wwins: Wrote 6 windows to J0620-2827_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0011341 Jy
! Component: 100  -  total flux cleaned = -0.00177017 Jy
! Component: 150  -  total flux cleaned = -0.0019374 Jy
! Component: 200  -  total flux cleaned = -0.00189802 Jy
! Component: 250  -  total flux cleaned = -0.002013 Jy
! Component: 300  -  total flux cleaned = -0.00219642 Jy
! Component: 350  -  total flux cleaned = -0.0023042 Jy
! Component: 400  -  total flux cleaned = -0.0026186 Jy
! Component: 450  -  total flux cleaned = -0.00288874 Jy
! Component: 500  -  total flux cleaned = -0.00311924 Jy
! Component: 550  -  total flux cleaned = -0.00344155 Jy
! Component: 600  -  total flux cleaned = -0.00375585 Jy
! Component: 650  -  total flux cleaned = -0.00397119 Jy
! Component: 700  -  total flux cleaned = -0.00427205 Jy
! Component: 750  -  total flux cleaned = -0.00456594 Jy
! Component: 800  -  total flux cleaned = -0.00471038 Jy
! Component: 850  -  total flux cleaned = -0.00510494 Jy
! Component: 900  -  total flux cleaned = -0.00521499 Jy
! Component: 950  -  total flux cleaned = -0.00535066 Jy
! Component: 1000  -  total flux cleaned = -0.00556429 Jy
! Component: 1050  -  total flux cleaned = -0.0057225 Jy
! Component: 1100  -  total flux cleaned = -0.00585186 Jy
! Component: 1150  -  total flux cleaned = -0.00595417 Jy
! Component: 1200  -  total flux cleaned = -0.00610515 Jy
! Component: 1250  -  total flux cleaned = -0.00617943 Jy
! Component: 1300  -  total flux cleaned = -0.00642283 Jy
! Component: 1350  -  total flux cleaned = -0.00659071 Jy
! Component: 1400  -  total flux cleaned = -0.00670868 Jy
! Component: 1450  -  total flux cleaned = -0.00684845 Jy
! Component: 1500  -  total flux cleaned = -0.00696367 Jy
! Component: 1550  -  total flux cleaned = -0.0070322 Jy
! Component: 1600  -  total flux cleaned = -0.00721184 Jy
! Component: 1650  -  total flux cleaned = -0.00727778 Jy
! Component: 1700  -  total flux cleaned = -0.0072997 Jy
! Component: 1750  -  total flux cleaned = -0.00747248 Jy
! Component: 1800  -  total flux cleaned = -0.0074294 Jy
! Component: 1850  -  total flux cleaned = -0.00755598 Jy
! Component: 1900  -  total flux cleaned = -0.00761806 Jy
! Component: 1950  -  total flux cleaned = -0.00763836 Jy
! Component: 2000  -  total flux cleaned = -0.00767927 Jy
! Component: 2050  -  total flux cleaned = -0.00782029 Jy
! Component: 2100  -  total flux cleaned = -0.00780049 Jy
! Component: 2150  -  total flux cleaned = -0.00787939 Jy
! Component: 2200  -  total flux cleaned = -0.00791873 Jy
! Component: 2250  -  total flux cleaned = -0.00807345 Jy
! Component: 2300  -  total flux cleaned = -0.00811196 Jy
! Component: 2350  -  total flux cleaned = -0.0083201 Jy
! Component: 2400  -  total flux cleaned = -0.00830139 Jy
! Component: 2450  -  total flux cleaned = -0.00845034 Jy
! Component: 2500  -  total flux cleaned = -0.00856077 Jy
! Component: 2550  -  total flux cleaned = -0.00857924 Jy
! Component: 2600  -  total flux cleaned = -0.008742 Jy
! Component: 2650  -  total flux cleaned = -0.00877784 Jy
! Component: 2700  -  total flux cleaned = -0.00881348 Jy
! Component: 2750  -  total flux cleaned = -0.00888421 Jy
! Component: 2800  -  total flux cleaned = -0.00904101 Jy
! Component: 2850  -  total flux cleaned = -0.00905805 Jy
! Component: 2900  -  total flux cleaned = -0.00909266 Jy
! Component: 2950  -  total flux cleaned = -0.00922859 Jy
! Component: 3000  -  total flux cleaned = -0.00927916 Jy
! Component: 3050  -  total flux cleaned = -0.00932935 Jy
! Component: 3100  -  total flux cleaned = -0.00947852 Jy
! Component: 3150  -  total flux cleaned = -0.009544 Jy
! Component: 3200  -  total flux cleaned = -0.0096094 Jy
! Component: 3250  -  total flux cleaned = -0.00970609 Jy
! Component: 3300  -  total flux cleaned = -0.00978632 Jy
! Component: 3350  -  total flux cleaned = -0.0098179 Jy
! Component: 3400  -  total flux cleaned = -0.00992844 Jy
! Component: 3450  -  total flux cleaned = -0.00991256 Jy
! Component: 3500  -  total flux cleaned = -0.00997484 Jy
! Component: 3550  -  total flux cleaned = -0.00997472 Jy
! Component: 3600  -  total flux cleaned = -0.0100665 Jy
! Component: 3650  -  total flux cleaned = -0.0100817 Jy
! Component: 3700  -  total flux cleaned = -0.0101721 Jy
! Component: 3750  -  total flux cleaned = -0.0102318 Jy
! Component: 3800  -  total flux cleaned = -0.0102614 Jy
! Component: 3850  -  total flux cleaned = -0.0102467 Jy
! Component: 3900  -  total flux cleaned = -0.0103054 Jy
! Component: 3950  -  total flux cleaned = -0.0103199 Jy
! Component: 4000  -  total flux cleaned = -0.0103921 Jy
! Component: 4050  -  total flux cleaned = -0.0104781 Jy
! Total flux subtracted in 4096 components = -0.0104497 Jy
! Clean residual min=-0.000762 max=0.000769 Jy/beam
! Clean residual mean=-0.000000 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.445587 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 423 components and 0.445587 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0620-2827_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8934 x 2.147 at -0.8033 degrees (North through East)
! Clean map  min=-0.0024452  max=0.33544 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0620-2827_X_map.fits
wmodel /image_prod/ug002_uva//J0620-2827_X_map.mod
! Writing 423 model components to file: /image_prod/ug002_uva//J0620-2827_X_map.mod
wobs   /image_prod/ug002_uva//J0620-2827_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0620-2827_X_uvs.fits
wwins  /image_prod/ug002_uva//J0620-2827_X_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0620-2827_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.335441 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000261406 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.233787 0.233787 0.467575 0.93515 1.8703 3.7406 7.4812 14.9624 29.9248 59.8496
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.335 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1283.22 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0620-2827_X_dfm.log closed on Wed Mar  4 21:16:58 2020