! Started logfile: /image_prod/ug002_uva//J0619+0736_X_dfm.log on Wed Mar  4 21:16:13 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0619+0736_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0619+0736_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.710185 visibilities/baseline/integration-bin.
! Found source: J0619+0736
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 18408 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0619+0736_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007347Jy  sigma=9.422855
! Fit after  self-cal, rms=0.916634Jy  sigma=8.577061
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8615 mas, bmaj=3.106 mas, bpa=-17.57 degrees
! Estimated noise=1.11219 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0609735 Jy
! Component: 100  -  total flux cleaned = 0.0837415 Jy
! Total flux subtracted in 100 components = 0.0837415 Jy
! Clean residual min=-0.005708 max=0.012707 Jy/beam
! Clean residual mean=0.000004 rms=0.001485 Jy/beam
! Combined flux in latest and established models = 0.0837415 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0837415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061816Jy  sigma=0.530129
! Fit after  self-cal, rms=0.061286Jy  sigma=0.524003
! Inverting map 
! Added new window around map position (-1.6, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013225 Jy
! Component: 100  -  total flux cleaned = 0.0206904 Jy
! Total flux subtracted in 100 components = 0.0206904 Jy
! Clean residual min=-0.003842 max=0.006247 Jy/beam
! Clean residual mean=0.000003 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 0.104432 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 0.104432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057699Jy  sigma=0.486771
! Fit after  self-cal, rms=0.057531Jy  sigma=0.485019
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00623515 Jy
! Component: 100  -  total flux cleaned = 0.00992646 Jy
! Total flux subtracted in 100 components = 0.00992646 Jy
! Clean residual min=-0.003122 max=0.003495 Jy/beam
! Clean residual mean=0.000003 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.114358 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 32 components and 0.114358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056708Jy  sigma=0.476550
! Fit after  self-cal, rms=0.056662Jy  sigma=0.476037
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.133 mas, bmaj=3.162 mas, bpa=-16.83 degrees
! Estimated noise=0.568159 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390395 Jy
! Component: 100  -  total flux cleaned = 0.00582248 Jy
! Component: 150  -  total flux cleaned = 0.00652059 Jy
! Component: 200  -  total flux cleaned = 0.00691785 Jy
! Total flux subtracted in 200 components = 0.00691785 Jy
! Clean residual min=-0.003070 max=0.002811 Jy/beam
! Clean residual mean=0.000002 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.121276 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 58 components and 0.121276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056371Jy  sigma=0.473072
! Fit after  self-cal, rms=0.056347Jy  sigma=0.472744
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.133 x 3.162 at -16.83 degrees (North through East)
! Clean map  min=-0.0028476  max=0.076386 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.95     KP        1.05     
!   LA        1.02     MK        1.00     NL        1.15     OV        0.94     
!   PT        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.97     HN        0.98     KP        1.06     
!   LA        1.05     MK        1.00     NL        1.11     OV        0.91     
!   PT        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        0.96     KP        1.08     
!   LA        1.02     MK        1.08     NL        1.15     OV        0.92     
!   PT        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     HN        0.98     KP        1.04     
!   LA        1.03     MK        1.01     NL        1.12     OV        0.97     
!   PT        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        0.94     KP        1.08     
!   LA        1.06     MK        1.15     NL        1.09     OV        0.89     
!   PT        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.00     KP        1.01     
!   LA        1.02     MK        1.01     NL        1.15     OV        0.92     
!   PT        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.00     KP        1.06     
!   LA        1.01     MK        1.12     NL        1.12     OV        0.95     
!   PT        0.89     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        0.95     KP        1.02     
!   LA        1.06     MK        0.96     NL        1.11     OV        0.92     
!   PT        0.92     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.96     KP        1.05     
!   LA        1.05     MK        0.96     NL        1.18     OV        0.96     
!   PT        0.90     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.99     KP        1.07     
!   LA        1.03     MK        1.08     NL        1.12     OV        0.94     
!   PT        0.91     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.02     KP        1.06     
!   LA        1.04     MK        1.01     NL        1.09     OV        0.92     
!   PT        0.92     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.91     KP        1.02     
!   LA        1.03     MK        0.91     NL        1.14     OV        0.91     
!   PT        0.95     
! 
! 
! Fit before self-cal, rms=0.056347Jy  sigma=0.472744
! Fit after  self-cal, rms=0.055324Jy  sigma=0.466956
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.141 mas, bmaj=3.141 mas, bpa=-16.67 degrees
! Estimated noise=0.570326 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.6, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274889 Jy
! Component: 100  -  total flux cleaned = 0.00352052 Jy
! Component: 150  -  total flux cleaned = 0.00385468 Jy
! Component: 200  -  total flux cleaned = 0.0040914 Jy
! Total flux subtracted in 200 components = 0.0040914 Jy
! Clean residual min=-0.001217 max=0.001220 Jy/beam
! Clean residual mean=0.000001 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.125368 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 78 components and 0.125368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055173Jy  sigma=0.465403
! Fit after  self-cal, rms=0.055175Jy  sigma=0.465143
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055175Jy  sigma=0.465143
! Fit after  self-cal, rms=0.055231Jy  sigma=0.463605
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.14 mas, bmaj=3.143 mas, bpa=-16.75 degrees
! Estimated noise=0.570584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120864 Jy
! Component: 100  -  total flux cleaned = 0.00164115 Jy
! Component: 150  -  total flux cleaned = 0.00180781 Jy
! Component: 200  -  total flux cleaned = 0.00192784 Jy
! Total flux subtracted in 200 components = 0.00192784 Jy
! Clean residual min=-0.001072 max=0.000989 Jy/beam
! Clean residual mean=0.000001 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.127296 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 93 components and 0.127296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055194Jy  sigma=0.463241
! Fit after  self-cal, rms=0.055208Jy  sigma=0.463179
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348639 Jy
! Component: 100  -  total flux cleaned = 0.000391172 Jy
! Component: 150  -  total flux cleaned = 0.000391265 Jy
! Component: 200  -  total flux cleaned = 0.000390966 Jy
! Total flux subtracted in 200 components = 0.000390966 Jy
! Clean residual min=-0.001046 max=0.000950 Jy/beam
! Clean residual mean=0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.127686 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.127687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055192Jy  sigma=0.463049
! Fit after  self-cal, rms=0.055194Jy  sigma=0.463042
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055194Jy  sigma=0.463042
! Fit after  self-cal, rms=0.055238Jy  sigma=0.462985
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.142 mas, bmaj=3.14 mas, bpa=-16.71 degrees
! Estimated noise=0.570625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000242844 Jy
! Component: 100  -  total flux cleaned = 0.000441088 Jy
! Component: 150  -  total flux cleaned = 0.000527928 Jy
! Component: 200  -  total flux cleaned = 0.000560087 Jy
! Total flux subtracted in 200 components = 0.000560087 Jy
! Clean residual min=-0.001004 max=0.000965 Jy/beam
! Clean residual mean=0.000001 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.128247 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 110 components and 0.128247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055225Jy  sigma=0.462871
! Fit after  self-cal, rms=0.055231Jy  sigma=0.462865
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137701 Jy
! Component: 100  -  total flux cleaned = 0.000137321 Jy
! Component: 150  -  total flux cleaned = 0.000137018 Jy
! Component: 200  -  total flux cleaned = 0.000136577 Jy
! Total flux subtracted in 200 components = 0.000136577 Jy
! Clean residual min=-0.000989 max=0.000961 Jy/beam
! Clean residual mean=0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.128383 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 115 components and 0.128383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055224Jy  sigma=0.462803
! Fit after  self-cal, rms=0.055225Jy  sigma=0.462799
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055225Jy  sigma=0.462799
! Fit after  self-cal, rms=0.055228Jy  sigma=0.462782
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=3.315 mas, bpa=-5.89 degrees
! Estimated noise=0.639324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228885 Jy
! Component: 100  -  total flux cleaned = 0.000283853 Jy
! Component: 150  -  total flux cleaned = 0.000283404 Jy
! Component: 200  -  total flux cleaned = 0.000283468 Jy
! Total flux subtracted in 200 components = 0.000283468 Jy
! Clean residual min=-0.000976 max=0.000978 Jy/beam
! Clean residual mean=0.000001 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.128667 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 141 components and 0.128667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055225Jy  sigma=0.462745
! Fit after  self-cal, rms=0.055227Jy  sigma=0.462740
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.13782e-05 Jy
! Component: 100  -  total flux cleaned = 7.33206e-05 Jy
! Component: 150  -  total flux cleaned = 7.34242e-05 Jy
! Component: 200  -  total flux cleaned = 6.66776e-05 Jy
! Total flux subtracted in 200 components = 6.66776e-05 Jy
! Clean residual min=-0.000969 max=0.000974 Jy/beam
! Clean residual mean=0.000001 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.128733 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 155 components and 0.128733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055226Jy  sigma=0.462722
! Fit after  self-cal, rms=0.055225Jy  sigma=0.462720
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.143 mas, bmaj=3.137 mas, bpa=-16.68 degrees
! Estimated noise=0.570412 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.143 x 3.137 at -16.68 degrees (North through East)
! Clean map  min=-0.00090845  max=0.07705 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.871 mas, bmaj=3.071 mas, bpa=-17.55 degrees
! Estimated noise=1.11566 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0613472 Jy
! Component: 100  -  total flux cleaned = 0.0862061 Jy
! Component: 150  -  total flux cleaned = 0.0994163 Jy
! Component: 200  -  total flux cleaned = 0.106888 Jy
! Total flux subtracted in 200 components = 0.106888 Jy
! Clean residual min=-0.003017 max=0.003953 Jy/beam
! Clean residual mean=0.000001 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.106888 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.106888 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.143 mas, bmaj=3.137 mas, bpa=-16.68 degrees
! Estimated noise=0.570412 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0066039 Jy
! Component: 100  -  total flux cleaned = 0.0105295 Jy
! Component: 150  -  total flux cleaned = 0.013202 Jy
! Component: 200  -  total flux cleaned = 0.0151589 Jy
! Total flux subtracted in 200 components = 0.0151589 Jy
! Clean residual min=-0.001318 max=0.001286 Jy/beam
! Clean residual mean=0.000000 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.122047 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 62 components and 0.122047 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=3.315 mas, bpa=-5.89 degrees
! Estimated noise=0.639324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193115 Jy
! Component: 100  -  total flux cleaned = 0.00320192 Jy
! Component: 150  -  total flux cleaned = 0.00413006 Jy
! Component: 200  -  total flux cleaned = 0.00482809 Jy
! Total flux subtracted in 200 components = 0.00482809 Jy
! Clean residual min=-0.001053 max=0.001013 Jy/beam
! Clean residual mean=0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.126875 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000374265 Jy
! Component: 100  -  total flux cleaned = 0.000571886 Jy
! Component: 150  -  total flux cleaned = 0.000731384 Jy
! Component: 200  -  total flux cleaned = 0.000877131 Jy
! Total flux subtracted in 200 components = 0.000877131 Jy
! Clean residual min=-0.000998 max=0.000973 Jy/beam
! Clean residual mean=0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.127752 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 129 components and 0.127752 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.143 mas, bmaj=3.137 mas, bpa=-16.68 degrees
! Estimated noise=0.570412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.12949e-05 Jy
! Component: 100  -  total flux cleaned = 0.000255293 Jy
! Component: 150  -  total flux cleaned = 0.000399293 Jy
! Component: 200  -  total flux cleaned = 0.000497462 Jy
! Total flux subtracted in 200 components = 0.000497462 Jy
! Clean residual min=-0.000974 max=0.000966 Jy/beam
! Clean residual mean=0.000001 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.128249 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 148 components and 0.128249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055240Jy  sigma=0.462855
! Fit after  self-cal, rms=0.055225Jy  sigma=0.462790
wmodel J0619+0736_X_map.mod
! Writing 148 model components to file: J0619+0736_X_map.mod
wobs   J0619+0736_X_uvs.fits
! Writing UV FITS file: J0619+0736_X_uvs.fits
wwins  J0619+0736_X_map.win
! wwins: Wrote 3 windows to J0619+0736_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000158239 Jy
! Component: 100  -  total flux cleaned = -0.000191602 Jy
! Component: 150  -  total flux cleaned = -0.000176374 Jy
! Component: 200  -  total flux cleaned = -0.00011679 Jy
! Component: 250  -  total flux cleaned = -4.47447e-05 Jy
! Component: 300  -  total flux cleaned = 1.11253e-05 Jy
! Component: 350  -  total flux cleaned = 6.56397e-05 Jy
! Component: 400  -  total flux cleaned = 3.89168e-05 Jy
! Component: 450  -  total flux cleaned = 1.2814e-05 Jy
! Component: 500  -  total flux cleaned = 1.30282e-05 Jy
! Component: 550  -  total flux cleaned = 5.08921e-05 Jy
! Component: 600  -  total flux cleaned = 8.81556e-05 Jy
! Component: 650  -  total flux cleaned = 0.000112552 Jy
! Component: 700  -  total flux cleaned = 0.000184349 Jy
! Component: 750  -  total flux cleaned = 0.000219439 Jy
! Component: 800  -  total flux cleaned = 0.000242382 Jy
! Component: 850  -  total flux cleaned = 0.000253701 Jy
! Component: 900  -  total flux cleaned = 0.00026509 Jy
! Component: 950  -  total flux cleaned = 0.000298186 Jy
! Component: 1000  -  total flux cleaned = 0.00028742 Jy
! Component: 1050  -  total flux cleaned = 0.000298024 Jy
! Component: 1100  -  total flux cleaned = 0.000297833 Jy
! Component: 1150  -  total flux cleaned = 0.000287343 Jy
! Component: 1200  -  total flux cleaned = 0.000277156 Jy
! Component: 1250  -  total flux cleaned = 0.00026692 Jy
! Component: 1300  -  total flux cleaned = 0.000266882 Jy
! Component: 1350  -  total flux cleaned = 0.000247084 Jy
! Component: 1400  -  total flux cleaned = 0.000266547 Jy
! Component: 1450  -  total flux cleaned = 0.000247113 Jy
! Component: 1500  -  total flux cleaned = 0.000237712 Jy
! Component: 1550  -  total flux cleaned = 0.000275475 Jy
! Component: 1600  -  total flux cleaned = 0.000247322 Jy
! Component: 1650  -  total flux cleaned = 0.000247344 Jy
! Component: 1700  -  total flux cleaned = 0.000238151 Jy
! Component: 1750  -  total flux cleaned = 0.000220124 Jy
! Component: 1800  -  total flux cleaned = 0.000220163 Jy
! Component: 1850  -  total flux cleaned = 0.000220206 Jy
! Component: 1900  -  total flux cleaned = 0.000246711 Jy
! Component: 1950  -  total flux cleaned = 0.000246588 Jy
! Component: 2000  -  total flux cleaned = 0.000237859 Jy
! Component: 2050  -  total flux cleaned = 0.000229261 Jy
! Component: 2100  -  total flux cleaned = 0.000229237 Jy
! Component: 2150  -  total flux cleaned = 0.000262907 Jy
! Component: 2200  -  total flux cleaned = 0.000271213 Jy
! Component: 2250  -  total flux cleaned = 0.000246314 Jy
! Component: 2300  -  total flux cleaned = 0.00027098 Jy
! Component: 2350  -  total flux cleaned = 0.000262811 Jy
! Component: 2400  -  total flux cleaned = 0.000262768 Jy
! Component: 2450  -  total flux cleaned = 0.00027077 Jy
! Component: 2500  -  total flux cleaned = 0.00025497 Jy
! Component: 2550  -  total flux cleaned = 0.000286462 Jy
! Component: 2600  -  total flux cleaned = 0.000239557 Jy
! Component: 2650  -  total flux cleaned = 0.000247374 Jy
! Component: 2700  -  total flux cleaned = 0.000216639 Jy
! Component: 2750  -  total flux cleaned = 0.000216662 Jy
! Component: 2800  -  total flux cleaned = 0.000216609 Jy
! Component: 2850  -  total flux cleaned = 0.000209024 Jy
! Component: 2900  -  total flux cleaned = 0.000179236 Jy
! Component: 2950  -  total flux cleaned = 0.000164496 Jy
! Component: 3000  -  total flux cleaned = 0.000149717 Jy
! Component: 3050  -  total flux cleaned = 0.000120495 Jy
! Component: 3100  -  total flux cleaned = 0.000113285 Jy
! Component: 3150  -  total flux cleaned = 0.000120371 Jy
! Component: 3200  -  total flux cleaned = 0.000106011 Jy
! Component: 3250  -  total flux cleaned = 7.05115e-05 Jy
! Component: 3300  -  total flux cleaned = 6.34496e-05 Jy
! Component: 3350  -  total flux cleaned = 5.6403e-05 Jy
! Component: 3400  -  total flux cleaned = 5.64077e-05 Jy
! Component: 3450  -  total flux cleaned = 5.64197e-05 Jy
! Component: 3500  -  total flux cleaned = 4.26912e-05 Jy
! Component: 3550  -  total flux cleaned = 4.26698e-05 Jy
! Component: 3600  -  total flux cleaned = 2.23494e-05 Jy
! Component: 3650  -  total flux cleaned = 4.25711e-05 Jy
! Component: 3700  -  total flux cleaned = 9.02551e-06 Jy
! Component: 3750  -  total flux cleaned = 9.10992e-06 Jy
! Component: 3800  -  total flux cleaned = -1.07299e-05 Jy
! Component: 3850  -  total flux cleaned = -3.03984e-05 Jy
! Component: 3900  -  total flux cleaned = -3.03587e-05 Jy
! Component: 3950  -  total flux cleaned = -3.68015e-05 Jy
! Component: 4000  -  total flux cleaned = -4.3186e-05 Jy
! Component: 4050  -  total flux cleaned = -4.3144e-05 Jy
! Total flux subtracted in 4096 components = -4.31423e-05 Jy
! Clean residual min=-0.000379 max=0.000389 Jy/beam
! Clean residual mean=0.000000 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.128206 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 425 components and 0.128206 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0619+0736_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.143 x 3.137 at -16.68 degrees (North through East)
! Clean map  min=-0.00073801  max=0.077132 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0619+0736_X_map.fits
wmodel /image_prod/ug002_uva//J0619+0736_X_map.mod
! Writing 425 model components to file: /image_prod/ug002_uva//J0619+0736_X_map.mod
wobs   /image_prod/ug002_uva//J0619+0736_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0619+0736_X_uvs.fits
wwins  /image_prod/ug002_uva//J0619+0736_X_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0619+0736_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0771322 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00011674 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.45405 0.45405 0.908101 1.8162 3.6324 7.26481 14.5296 29.0592 58.1185
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.077 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  660.719 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0619+0736_X_dfm.log closed on Wed Mar  4 21:16:17 2020