! Started logfile: /image_prod/ug002_uva//J0602-0004_X_dfm.log on Wed Mar  4 21:08:01 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0602-0004_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0602-0004_X_uva.fits
! AN table 1: 90 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.925926 visibilities/baseline/integration-bin.
! Found source: J0602-0004
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 36000 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0602-0004_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002810Jy  sigma=8.740309
! Fit after  self-cal, rms=0.971489Jy  sigma=8.472828
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6661 mas, bmaj=1.661 mas, bpa=-3.785 degrees
! Estimated noise=0.760239 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0239296 Jy
! Component: 100  -  total flux cleaned = 0.028561 Jy
! Total flux subtracted in 100 components = 0.028561 Jy
! Clean residual min=-0.002646 max=0.002824 Jy/beam
! Clean residual mean=0.000001 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.028561 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.028561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057966Jy  sigma=0.477325
! Fit after  self-cal, rms=0.056040Jy  sigma=0.459629
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00398332 Jy
! Component: 100  -  total flux cleaned = 0.00398044 Jy
! Total flux subtracted in 100 components = 0.00398044 Jy
! Clean residual min=-0.002061 max=0.002596 Jy/beam
! Clean residual mean=0.000000 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.0325414 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 9 components and 0.0325414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055701Jy  sigma=0.456968
! Fit after  self-cal, rms=0.055654Jy  sigma=0.456774
! Inverting map 
! Added new window around map position (-1.6, 40.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134936 Jy
! Component: 100  -  total flux cleaned = 0.00165496 Jy
! Total flux subtracted in 100 components = 0.00165496 Jy
! Clean residual min=-0.001824 max=0.002468 Jy/beam
! Clean residual mean=0.000000 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.0341964 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.0341964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055580Jy  sigma=0.456135
! Fit after  self-cal, rms=0.055523Jy  sigma=0.455836
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8056 mas, bmaj=1.888 mas, bpa=-2.931 degrees
! Estimated noise=0.43286 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, -8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150667 Jy
! Component: 100  -  total flux cleaned = 0.00162186 Jy
! Component: 150  -  total flux cleaned = 0.00184979 Jy
! Component: 200  -  total flux cleaned = 0.00200071 Jy
! Total flux subtracted in 200 components = 0.00200071 Jy
! Clean residual min=-0.001312 max=0.001688 Jy/beam
! Clean residual mean=0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0361971 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 30 components and 0.0361971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055410Jy  sigma=0.454857
! Fit after  self-cal, rms=0.055349Jy  sigma=0.454530
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8056 x 1.888 at -2.931 degrees (North through East)
! Clean map  min=-0.0013124  max=0.03377 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.03     HN        1.09     KP        1.07     
!   LA        0.87     MK        1.04     NL        1.29     OV        0.91     
!   SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.03     KP        1.16     
!   LA        0.92     MK        1.08     NL        1.21     OV        0.89     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.94     KP        1.22     
!   LA        0.91     MK        1.05     NL        1.18     OV        0.92     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.07     HN        0.93     KP        1.26     
!   LA        0.89     MK        0.98     NL        1.32     OV        0.97     
!   SC        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.07     KP        1.20     
!   LA        0.95     MK        1.00     NL        1.22     OV        0.92     
!   SC        0.91     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.00     KP        1.36     
!   LA        0.88     MK        1.08     NL        1.17     OV        0.92     
!   SC        0.89     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.89     KP        1.32     
!   LA        0.87     MK        1.08     NL        1.15     OV        0.97     
!   SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        0.89     KP        1.22     
!   LA        0.92     MK        1.10     NL        1.18     OV        0.86     
!   SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.92     KP        1.21     
!   LA        0.89     MK        1.06     NL        1.12     OV        0.89     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.93     HN        0.88     KP        1.24     
!   LA        0.89     MK        1.10     NL        1.30     OV        0.89     
!   SC        0.91     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.86     HN        0.96     KP        1.25     
!   LA        0.95     MK        0.92     NL        1.20     OV        0.97     
!   SC        0.80     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.92     HN        0.91     KP        1.23     
!   LA        0.92     MK        0.86     NL        1.11     OV        0.89     
!   SC        0.84     
! 
! 
! Fit before self-cal, rms=0.055349Jy  sigma=0.454530
! Fit after  self-cal, rms=0.053679Jy  sigma=0.452214
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7988 mas, bmaj=1.867 mas, bpa=-1.612 degrees
! Estimated noise=0.431774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227887 Jy
! Component: 100  -  total flux cleaned = 0.000259873 Jy
! Component: 150  -  total flux cleaned = 0.000273736 Jy
! Component: 200  -  total flux cleaned = 0.000309773 Jy
! Total flux subtracted in 200 components = 0.000309773 Jy
! Clean residual min=-0.000952 max=0.000882 Jy/beam
! Clean residual mean=0.000000 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0365069 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 47 components and 0.0365069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053671Jy  sigma=0.452149
! Fit after  self-cal, rms=0.053759Jy  sigma=0.451583
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053759Jy  sigma=0.451583
! Fit after  self-cal, rms=0.054386Jy  sigma=0.450724
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7992 mas, bmaj=1.861 mas, bpa=-1.122 degrees
! Estimated noise=0.433597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.54243e-05 Jy
! Component: 100  -  total flux cleaned = -3.85634e-05 Jy
! Component: 150  -  total flux cleaned = 2.67815e-05 Jy
! Component: 200  -  total flux cleaned = 9.56988e-05 Jy
! Total flux subtracted in 200 components = 9.56988e-05 Jy
! Clean residual min=-0.000825 max=0.000741 Jy/beam
! Clean residual mean=-0.000000 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.0366026 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 59 components and 0.0366026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054380Jy  sigma=0.450686
! Fit after  self-cal, rms=0.054445Jy  sigma=0.450339
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110551 Jy
! Component: 100  -  total flux cleaned = 0.000153515 Jy
! Component: 150  -  total flux cleaned = 0.000172811 Jy
! Component: 200  -  total flux cleaned = 0.000181649 Jy
! Total flux subtracted in 200 components = 0.000181649 Jy
! Clean residual min=-0.000845 max=0.000752 Jy/beam
! Clean residual mean=0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.0367842 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 67 components and 0.0367842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054441Jy  sigma=0.450311
! Fit after  self-cal, rms=0.054441Jy  sigma=0.450293
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054441Jy  sigma=0.450293
! Fit after  self-cal, rms=0.054815Jy  sigma=0.450177
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7986 mas, bmaj=1.856 mas, bpa=-0.8811 degrees
! Estimated noise=0.432853 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.96158e-05 Jy
! Component: 100  -  total flux cleaned = -5.89255e-05 Jy
! Component: 150  -  total flux cleaned = -1.24652e-05 Jy
! Component: 200  -  total flux cleaned = 3.81843e-05 Jy
! Total flux subtracted in 200 components = 3.81843e-05 Jy
! Clean residual min=-0.000782 max=0.000747 Jy/beam
! Clean residual mean=-0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0368224 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 71 components and 0.0368224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054811Jy  sigma=0.450154
! Fit after  self-cal, rms=0.054849Jy  sigma=0.450101
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.36583e-06 Jy
! Component: 100  -  total flux cleaned = -6.46104e-06 Jy
! Component: 150  -  total flux cleaned = 1.00916e-05 Jy
! Component: 200  -  total flux cleaned = 3.3162e-05 Jy
! Total flux subtracted in 200 components = 3.3162e-05 Jy
! Clean residual min=-0.000779 max=0.000727 Jy/beam
! Clean residual mean=-0.000000 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.0368556 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 77 components and 0.0368556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054846Jy  sigma=0.450085
! Fit after  self-cal, rms=0.054848Jy  sigma=0.450079
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054848Jy  sigma=0.450079
! Fit after  self-cal, rms=0.054944Jy  sigma=0.450060
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.924 mas, bmaj=3.019 mas, bpa=4.285 degrees
! Estimated noise=0.579831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000166496 Jy
! Component: 100  -  total flux cleaned = 0.000210678 Jy
! Component: 150  -  total flux cleaned = 0.000263922 Jy
! Component: 200  -  total flux cleaned = 0.000277751 Jy
! Total flux subtracted in 200 components = 0.000277751 Jy
! Clean residual min=-0.000778 max=0.000791 Jy/beam
! Clean residual mean=-0.000000 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.0371333 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 89 components and 0.0371333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054943Jy  sigma=0.450055
! Fit after  self-cal, rms=0.054959Jy  sigma=0.450022
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.95637e-05 Jy
! Component: 100  -  total flux cleaned = 1.92861e-05 Jy
! Component: 150  -  total flux cleaned = 3.2661e-05 Jy
! Component: 200  -  total flux cleaned = 5.11368e-05 Jy
! Total flux subtracted in 200 components = 5.11368e-05 Jy
! Clean residual min=-0.000793 max=0.000803 Jy/beam
! Clean residual mean=-0.000000 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0371845 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 89 components and 0.0371845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054959Jy  sigma=0.450020
! Fit after  self-cal, rms=0.054957Jy  sigma=0.450011
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7979 mas, bmaj=1.853 mas, bpa=-0.7383 degrees
! Estimated noise=0.432323 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7979 x 1.853 at -0.7383 degrees (North through East)
! Clean map  min=-0.0012305  max=0.033427 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6608 mas, bmaj=1.628 mas, bpa=-1.558 degrees
! Estimated noise=0.759654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0267599 Jy
! Component: 100  -  total flux cleaned = 0.0330266 Jy
! Component: 150  -  total flux cleaned = 0.034631 Jy
! Component: 200  -  total flux cleaned = 0.035797 Jy
! Total flux subtracted in 200 components = 0.035797 Jy
! Clean residual min=-0.001745 max=0.001587 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.035797 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.035797 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7979 mas, bmaj=1.853 mas, bpa=-0.7383 degrees
! Estimated noise=0.432323 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000253495 Jy
! Component: 100  -  total flux cleaned = 5.14947e-05 Jy
! Component: 150  -  total flux cleaned = 0.000158048 Jy
! Component: 200  -  total flux cleaned = 0.000253582 Jy
! Total flux subtracted in 200 components = 0.000253582 Jy
! Clean residual min=-0.000903 max=0.000874 Jy/beam
! Clean residual mean=-0.000000 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0360505 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 32 components and 0.0360505 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.924 mas, bmaj=3.019 mas, bpa=4.285 degrees
! Estimated noise=0.579831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000435473 Jy
! Component: 100  -  total flux cleaned = 0.000626865 Jy
! Component: 150  -  total flux cleaned = 0.000744467 Jy
! Component: 200  -  total flux cleaned = 0.000848029 Jy
! Total flux subtracted in 200 components = 0.000848029 Jy
! Clean residual min=-0.000794 max=0.000862 Jy/beam
! Clean residual mean=-0.000000 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.0368986 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.05555e-05 Jy
! Component: 100  -  total flux cleaned = 0.000111206 Jy
! Component: 150  -  total flux cleaned = 0.000149063 Jy
! Component: 200  -  total flux cleaned = 0.000183174 Jy
! Total flux subtracted in 200 components = 0.000183174 Jy
! Clean residual min=-0.000788 max=0.000829 Jy/beam
! Clean residual mean=-0.000000 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.0370817 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 51 components and 0.0370817 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7979 mas, bmaj=1.853 mas, bpa=-0.7383 degrees
! Estimated noise=0.432323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.38406e-05 Jy
! Component: 100  -  total flux cleaned = 4.27215e-05 Jy
! Component: 150  -  total flux cleaned = 5.97729e-05 Jy
! Component: 200  -  total flux cleaned = 8.99334e-05 Jy
! Total flux subtracted in 200 components = 8.99334e-05 Jy
! Clean residual min=-0.000813 max=0.000750 Jy/beam
! Clean residual mean=-0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.0371717 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 61 components and 0.0371717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054968Jy  sigma=0.450130
! Fit after  self-cal, rms=0.054965Jy  sigma=0.450077
wmodel J0602-0004_X_map.mod
! Writing 61 model components to file: J0602-0004_X_map.mod
wobs   J0602-0004_X_uvs.fits
! Writing UV FITS file: J0602-0004_X_uvs.fits
wwins  J0602-0004_X_map.win
! wwins: Wrote 3 windows to J0602-0004_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000191413 Jy
! Component: 100  -  total flux cleaned = -0.00035396 Jy
! Component: 150  -  total flux cleaned = -0.000432303 Jy
! Component: 200  -  total flux cleaned = -0.000407902 Jy
! Component: 250  -  total flux cleaned = -0.000420575 Jy
! Component: 300  -  total flux cleaned = -0.000396833 Jy
! Component: 350  -  total flux cleaned = -0.000361843 Jy
! Component: 400  -  total flux cleaned = -0.000338892 Jy
! Component: 450  -  total flux cleaned = -0.000282704 Jy
! Component: 500  -  total flux cleaned = -0.000249948 Jy
! Component: 550  -  total flux cleaned = -0.000239072 Jy
! Component: 600  -  total flux cleaned = -0.000217734 Jy
! Component: 650  -  total flux cleaned = -0.000186331 Jy
! Component: 700  -  total flux cleaned = -0.000175846 Jy
! Component: 750  -  total flux cleaned = -0.000165634 Jy
! Component: 800  -  total flux cleaned = -0.000135583 Jy
! Component: 850  -  total flux cleaned = -0.000145596 Jy
! Component: 900  -  total flux cleaned = -0.000135674 Jy
! Component: 950  -  total flux cleaned = -8.75732e-05 Jy
! Component: 1000  -  total flux cleaned = -5.92432e-05 Jy
! Component: 1050  -  total flux cleaned = -5.94008e-05 Jy
! Component: 1100  -  total flux cleaned = -4.0752e-05 Jy
! Component: 1150  -  total flux cleaned = -4.07884e-05 Jy
! Component: 1200  -  total flux cleaned = 4.69056e-06 Jy
! Component: 1250  -  total flux cleaned = 3.14377e-05 Jy
! Component: 1300  -  total flux cleaned = 5.80534e-05 Jy
! Component: 1350  -  total flux cleaned = 4.92464e-05 Jy
! Component: 1400  -  total flux cleaned = 9.27358e-05 Jy
! Component: 1450  -  total flux cleaned = 0.00014435 Jy
! Component: 1500  -  total flux cleaned = 0.000135789 Jy
! Component: 1550  -  total flux cleaned = 0.000186379 Jy
! Component: 1600  -  total flux cleaned = 0.000178019 Jy
! Component: 1650  -  total flux cleaned = 0.00018639 Jy
! Component: 1700  -  total flux cleaned = 0.000243488 Jy
! Component: 1750  -  total flux cleaned = 0.000291966 Jy
! Component: 1800  -  total flux cleaned = 0.00028401 Jy
! Component: 1850  -  total flux cleaned = 0.000315744 Jy
! Component: 1900  -  total flux cleaned = 0.000370893 Jy
! Component: 1950  -  total flux cleaned = 0.000378584 Jy
! Component: 2000  -  total flux cleaned = 0.000363071 Jy
! Component: 2050  -  total flux cleaned = 0.000409155 Jy
! Component: 2100  -  total flux cleaned = 0.000424274 Jy
! Component: 2150  -  total flux cleaned = 0.000409099 Jy
! Component: 2200  -  total flux cleaned = 0.000431535 Jy
! Component: 2250  -  total flux cleaned = 0.000439027 Jy
! Component: 2300  -  total flux cleaned = 0.000505322 Jy
! Component: 2350  -  total flux cleaned = 0.000461396 Jy
! Component: 2400  -  total flux cleaned = 0.000497619 Jy
! Component: 2450  -  total flux cleaned = 0.000504725 Jy
! Component: 2500  -  total flux cleaned = 0.000490415 Jy
! Component: 2550  -  total flux cleaned = 0.000525878 Jy
! Component: 2600  -  total flux cleaned = 0.000547009 Jy
! Component: 2650  -  total flux cleaned = 0.000568032 Jy
! Component: 2700  -  total flux cleaned = 0.000595785 Jy
! Component: 2750  -  total flux cleaned = 0.00058886 Jy
! Component: 2800  -  total flux cleaned = 0.000629886 Jy
! Component: 2850  -  total flux cleaned = 0.000629895 Jy
! Component: 2900  -  total flux cleaned = 0.000643372 Jy
! Component: 2950  -  total flux cleaned = 0.000676774 Jy
! Component: 3000  -  total flux cleaned = 0.000696634 Jy
! Component: 3050  -  total flux cleaned = 0.00070988 Jy
! Component: 3100  -  total flux cleaned = 0.000709911 Jy
! Component: 3150  -  total flux cleaned = 0.000742407 Jy
! Component: 3200  -  total flux cleaned = 0.000768359 Jy
! Component: 3250  -  total flux cleaned = 0.000755505 Jy
! Component: 3300  -  total flux cleaned = 0.000781071 Jy
! Component: 3350  -  total flux cleaned = 0.0007812 Jy
! Component: 3400  -  total flux cleaned = 0.000825343 Jy
! Component: 3450  -  total flux cleaned = 0.000850514 Jy
! Component: 3500  -  total flux cleaned = 0.000869112 Jy
! Component: 3550  -  total flux cleaned = 0.000912599 Jy
! Component: 3600  -  total flux cleaned = 0.000931133 Jy
! Component: 3650  -  total flux cleaned = 0.000986262 Jy
! Component: 3700  -  total flux cleaned = 0.00101058 Jy
! Component: 3750  -  total flux cleaned = 0.000986397 Jy
! Component: 3800  -  total flux cleaned = 0.00103457 Jy
! Component: 3850  -  total flux cleaned = 0.00109438 Jy
! Component: 3900  -  total flux cleaned = 0.00111224 Jy
! Component: 3950  -  total flux cleaned = 0.00117144 Jy
! Component: 4000  -  total flux cleaned = 0.00115379 Jy
! Component: 4050  -  total flux cleaned = 0.00119474 Jy
! Total flux subtracted in 4096 components = 0.00122388 Jy
! Clean residual min=-0.000408 max=0.000333 Jy/beam
! Clean residual mean=-0.000000 rms=0.000100 Jy/beam
! Combined flux in latest and established models = 0.0383956 Jy
keep
! Adding 326 model components to the UV plane model.
! The established model now contains 387 components and 0.0383955 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0602-0004_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7979 x 1.853 at -0.7383 degrees (North through East)
! Clean map  min=-0.0010892  max=0.033027 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0602-0004_X_map.fits
wmodel /image_prod/ug002_uva//J0602-0004_X_map.mod
! Writing 387 model components to file: /image_prod/ug002_uva//J0602-0004_X_map.mod
wobs   /image_prod/ug002_uva//J0602-0004_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0602-0004_X_uvs.fits
wwins  /image_prod/ug002_uva//J0602-0004_X_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0602-0004_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0330271 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000100685 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.91457 0.91457 1.82914 3.65828 7.31656 14.6331 29.2662 58.5325
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.033 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  328.022 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0602-0004_X_dfm.log closed on Wed Mar  4 21:08:06 2020