! Started logfile: /image_prod/ug002_uva//J0559-1817_S_dfm.log on Wed Mar  4 21:06:56 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0559-1817_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0559-1817_S_uva.fits
! AN table 1: 50 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.979556 visibilities/baseline/integration-bin.
! Found source: J0559-1817
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6612 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0559-1817_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036163Jy  sigma=6.607302
! Fit after  self-cal, rms=0.793276Jy  sigma=5.086463
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.717 mas, bmaj=6.674 mas, bpa=-5.763 degrees
! Estimated noise=1.97286 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.157059 Jy
! Component: 100  -  total flux cleaned = 0.209484 Jy
! Total flux subtracted in 100 components = 0.209484 Jy
! Clean residual min=-0.014851 max=0.023791 Jy/beam
! Clean residual mean=-0.000006 rms=0.003499 Jy/beam
! Combined flux in latest and established models = 0.209484 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.209484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120223Jy  sigma=0.545448
! Fit after  self-cal, rms=0.120251Jy  sigma=0.545056
! Inverting map 
! Added new window around map position (41, -65.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178223 Jy
! Component: 100  -  total flux cleaned = 0.0191341 Jy
! Total flux subtracted in 100 components = 0.0191341 Jy
! Clean residual min=-0.012933 max=0.015395 Jy/beam
! Clean residual mean=0.000003 rms=0.002562 Jy/beam
! Combined flux in latest and established models = 0.228618 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 15 components and 0.228618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115236Jy  sigma=0.507038
! Fit after  self-cal, rms=0.115174Jy  sigma=0.506449
! Inverting map 
! Added new window around map position (-34, 67.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00858641 Jy
! Component: 100  -  total flux cleaned = 0.00821373 Jy
! Total flux subtracted in 100 components = 0.00821373 Jy
! Clean residual min=-0.010131 max=0.011585 Jy/beam
! Clean residual mean=0.000004 rms=0.002149 Jy/beam
! Combined flux in latest and established models = 0.236832 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 0.236832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113449Jy  sigma=0.495627
! Fit after  self-cal, rms=0.113318Jy  sigma=0.494551
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.398 mas, bmaj=7.909 mas, bpa=-2.632 degrees
! Estimated noise=1.41349 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, 1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00592247 Jy
! Component: 100  -  total flux cleaned = 0.00843718 Jy
! Component: 150  -  total flux cleaned = 0.0099548 Jy
! Component: 200  -  total flux cleaned = 0.0108302 Jy
! Total flux subtracted in 200 components = 0.0108302 Jy
! Clean residual min=-0.006283 max=0.007427 Jy/beam
! Clean residual mean=0.000001 rms=0.001571 Jy/beam
! Combined flux in latest and established models = 0.247662 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 42 components and 0.247662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111529Jy  sigma=0.485299
! Fit after  self-cal, rms=0.111417Jy  sigma=0.484108
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.398 x 7.909 at -2.632 degrees (North through East)
! Clean map  min=-0.010445  max=0.20488 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.96     HN        1.07     KP        1.00     
!   LA        1.03     MK        0.95     NL        1.02     OV        0.97     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.96     HN        1.02     KP        0.98     
!   LA        1.01     MK        1.01     NL        1.00     OV        1.00     
!   PT        1.01     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        1.08     KP        0.98     
!   LA        0.97     MK        0.94     NL        1.13     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.111417Jy  sigma=0.484108
! Fit after  self-cal, rms=0.104875Jy  sigma=0.477560
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.375 mas, bmaj=7.853 mas, bpa=-2.411 degrees
! Estimated noise=1.40157 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00251212 Jy
! Component: 100  -  total flux cleaned = -0.00206671 Jy
! Component: 150  -  total flux cleaned = -0.00181651 Jy
! Component: 200  -  total flux cleaned = -0.00181876 Jy
! Total flux subtracted in 200 components = -0.00181876 Jy
! Clean residual min=-0.004887 max=0.005383 Jy/beam
! Clean residual mean=0.000010 rms=0.001308 Jy/beam
! Combined flux in latest and established models = 0.245843 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 0.245843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104384Jy  sigma=0.474605
! Fit after  self-cal, rms=0.104372Jy  sigma=0.474378
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104372Jy  sigma=0.474378
! Fit after  self-cal, rms=0.087952Jy  sigma=0.454331
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.414 mas, bmaj=8.016 mas, bpa=-1.371 degrees
! Estimated noise=1.41967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00217952 Jy
! Component: 100  -  total flux cleaned = -0.00267785 Jy
! Component: 150  -  total flux cleaned = -0.00288019 Jy
! Component: 200  -  total flux cleaned = -0.00299925 Jy
! Total flux subtracted in 200 components = -0.00299925 Jy
! Clean residual min=-0.003727 max=0.003348 Jy/beam
! Clean residual mean=0.000001 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.242844 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 0.242844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087749Jy  sigma=0.453391
! Fit after  self-cal, rms=0.087765Jy  sigma=0.453221
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000362837 Jy
! Component: 100  -  total flux cleaned = -0.00036557 Jy
! Component: 150  -  total flux cleaned = -0.000366256 Jy
! Component: 200  -  total flux cleaned = -0.000408221 Jy
! Total flux subtracted in 200 components = -0.000408221 Jy
! Clean residual min=-0.003387 max=0.003211 Jy/beam
! Clean residual mean=0.000001 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 0.242436 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 84 components and 0.242436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087694Jy  sigma=0.452947
! Fit after  self-cal, rms=0.087693Jy  sigma=0.452929
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087693Jy  sigma=0.452929
! Fit after  self-cal, rms=0.088939Jy  sigma=0.452634
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.426 mas, bmaj=8.08 mas, bpa=-0.9543 degrees
! Estimated noise=1.42566 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00122402 Jy
! Component: 100  -  total flux cleaned = -0.00132807 Jy
! Component: 150  -  total flux cleaned = -0.00146684 Jy
! Component: 200  -  total flux cleaned = -0.00150773 Jy
! Total flux subtracted in 200 components = -0.00150773 Jy
! Clean residual min=-0.003171 max=0.003158 Jy/beam
! Clean residual mean=0.000001 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.240928 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 89 components and 0.240928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088847Jy  sigma=0.452265
! Fit after  self-cal, rms=0.088851Jy  sigma=0.452230
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254965 Jy
! Component: 100  -  total flux cleaned = -0.000295241 Jy
! Component: 150  -  total flux cleaned = -0.000295601 Jy
! Component: 200  -  total flux cleaned = -0.000296929 Jy
! Total flux subtracted in 200 components = -0.000296929 Jy
! Clean residual min=-0.002970 max=0.003107 Jy/beam
! Clean residual mean=0.000001 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.240631 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 98 components and 0.240631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088810Jy  sigma=0.452059
! Fit after  self-cal, rms=0.088808Jy  sigma=0.452052
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088808Jy  sigma=0.452052
! Fit after  self-cal, rms=0.089763Jy  sigma=0.451936
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.129 mas, bmaj=16.32 mas, bpa=2.885 degrees
! Estimated noise=1.68506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000435099 Jy
! Component: 100  -  total flux cleaned = -0.000569539 Jy
! Component: 150  -  total flux cleaned = -0.000568169 Jy
! Component: 200  -  total flux cleaned = -0.000567589 Jy
! Total flux subtracted in 200 components = -0.000567589 Jy
! Clean residual min=-0.002874 max=0.003578 Jy/beam
! Clean residual mean=0.000002 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.240064 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 107 components and 0.240064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089733Jy  sigma=0.451811
! Fit after  self-cal, rms=0.089732Jy  sigma=0.451780
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206056 Jy
! Component: 100  -  total flux cleaned = -0.00023864 Jy
! Component: 150  -  total flux cleaned = -0.000238099 Jy
! Component: 200  -  total flux cleaned = -0.000263988 Jy
! Total flux subtracted in 200 components = -0.000263988 Jy
! Clean residual min=-0.002805 max=0.003533 Jy/beam
! Clean residual mean=0.000001 rms=0.000895 Jy/beam
! Combined flux in latest and established models = 0.2398 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 115 components and 0.2398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089722Jy  sigma=0.451747
! Fit after  self-cal, rms=0.089718Jy  sigma=0.451732
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.434 mas, bmaj=8.127 mas, bpa=-0.6671 degrees
! Estimated noise=1.42994 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.434 x 8.127 at -0.6671 degrees (North through East)
! Clean map  min=-0.005764  max=0.20651 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.741 mas, bmaj=6.792 mas, bpa=-3.636 degrees
! Estimated noise=2.04105 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.160529 Jy
! Component: 100  -  total flux cleaned = 0.210868 Jy
! Component: 150  -  total flux cleaned = 0.233526 Jy
! Component: 200  -  total flux cleaned = 0.236334 Jy
! Total flux subtracted in 200 components = 0.236334 Jy
! Clean residual min=-0.007731 max=0.010215 Jy/beam
! Clean residual mean=-0.000001 rms=0.001662 Jy/beam
! Combined flux in latest and established models = 0.236334 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.236334 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.434 mas, bmaj=8.127 mas, bpa=-0.6671 degrees
! Estimated noise=1.42994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-41, 65.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00315769 Jy
! Component: 100  -  total flux cleaned = 0.00338778 Jy
! Component: 150  -  total flux cleaned = 0.00339052 Jy
! Component: 200  -  total flux cleaned = 0.00356512 Jy
! Total flux subtracted in 200 components = 0.00356512 Jy
! Clean residual min=-0.003434 max=0.003694 Jy/beam
! Clean residual mean=0.000001 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.239899 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 44 components and 0.239899 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.129 mas, bmaj=16.32 mas, bpa=2.885 degrees
! Estimated noise=1.68506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000424805 Jy
! Component: 100  -  total flux cleaned = 0.000539846 Jy
! Component: 150  -  total flux cleaned = 0.000588844 Jy
! Component: 200  -  total flux cleaned = 0.000632672 Jy
! Total flux subtracted in 200 components = 0.000632672 Jy
! Clean residual min=-0.002822 max=0.003719 Jy/beam
! Clean residual mean=0.000002 rms=0.000907 Jy/beam
! Combined flux in latest and established models = 0.240531 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.20563e-07 Jy
! Component: 100  -  total flux cleaned = -3.48675e-05 Jy
! Component: 150  -  total flux cleaned = -6.89537e-05 Jy
! Component: 200  -  total flux cleaned = -0.000102437 Jy
! Total flux subtracted in 200 components = -0.000102437 Jy
! Clean residual min=-0.002763 max=0.003660 Jy/beam
! Clean residual mean=0.000001 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.240429 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 76 components and 0.240429 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.434 mas, bmaj=8.127 mas, bpa=-0.6671 degrees
! Estimated noise=1.42994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000301986 Jy
! Component: 100  -  total flux cleaned = -0.000300146 Jy
! Component: 150  -  total flux cleaned = -0.000205 Jy
! Component: 200  -  total flux cleaned = -4.17544e-05 Jy
! Total flux subtracted in 200 components = -4.17544e-05 Jy
! Clean residual min=-0.002880 max=0.003117 Jy/beam
! Clean residual mean=0.000001 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.240387 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 97 components and 0.240387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089778Jy  sigma=0.452112
! Fit after  self-cal, rms=0.089732Jy  sigma=0.452006
wmodel J0559-1817_S_map.mod
! Writing 97 model components to file: J0559-1817_S_map.mod
wobs   J0559-1817_S_uvs.fits
! Writing UV FITS file: J0559-1817_S_uvs.fits
wwins  J0559-1817_S_map.win
! wwins: Wrote 5 windows to J0559-1817_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000463512 Jy
! Component: 100  -  total flux cleaned = 0.000810371 Jy
! Component: 150  -  total flux cleaned = 0.000904918 Jy
! Component: 200  -  total flux cleaned = 0.000948771 Jy
! Component: 250  -  total flux cleaned = 0.000862322 Jy
! Component: 300  -  total flux cleaned = 0.000987816 Jy
! Component: 350  -  total flux cleaned = 0.000988677 Jy
! Component: 400  -  total flux cleaned = 0.00106763 Jy
! Component: 450  -  total flux cleaned = 0.000952336 Jy
! Component: 500  -  total flux cleaned = 0.000989678 Jy
! Component: 550  -  total flux cleaned = 0.000952142 Jy
! Component: 600  -  total flux cleaned = 0.000987115 Jy
! Component: 650  -  total flux cleaned = 0.000915129 Jy
! Component: 700  -  total flux cleaned = 0.000775811 Jy
! Component: 750  -  total flux cleaned = 0.000810219 Jy
! Component: 800  -  total flux cleaned = 0.000743387 Jy
! Component: 850  -  total flux cleaned = 0.000710168 Jy
! Component: 900  -  total flux cleaned = 0.00054917 Jy
! Component: 950  -  total flux cleaned = 0.000580203 Jy
! Component: 1000  -  total flux cleaned = 0.000455166 Jy
! Component: 1050  -  total flux cleaned = 0.000393458 Jy
! Component: 1100  -  total flux cleaned = 0.000151949 Jy
! Component: 1150  -  total flux cleaned = 9.31735e-05 Jy
! Component: 1200  -  total flux cleaned = -2.39177e-05 Jy
! Component: 1250  -  total flux cleaned = -0.000139199 Jy
! Component: 1300  -  total flux cleaned = -0.0002244 Jy
! Component: 1350  -  total flux cleaned = -0.000168632 Jy
! Component: 1400  -  total flux cleaned = -0.000307866 Jy
! Component: 1450  -  total flux cleaned = -0.000362556 Jy
! Component: 1500  -  total flux cleaned = -0.000443676 Jy
! Component: 1550  -  total flux cleaned = -0.000336915 Jy
! Component: 1600  -  total flux cleaned = -0.000416405 Jy
! Component: 1650  -  total flux cleaned = -0.000494108 Jy
! Component: 1700  -  total flux cleaned = -0.000442608 Jy
! Component: 1750  -  total flux cleaned = -0.000493598 Jy
! Component: 1800  -  total flux cleaned = -0.00046832 Jy
! Component: 1850  -  total flux cleaned = -0.000493587 Jy
! Component: 1900  -  total flux cleaned = -0.000419973 Jy
! Component: 1950  -  total flux cleaned = -0.000395821 Jy
! Component: 2000  -  total flux cleaned = -0.000372144 Jy
! Component: 2050  -  total flux cleaned = -0.000348928 Jy
! Component: 2100  -  total flux cleaned = -0.000301931 Jy
! Component: 2150  -  total flux cleaned = -0.000348942 Jy
! Component: 2200  -  total flux cleaned = -0.000372304 Jy
! Component: 2250  -  total flux cleaned = -0.000349107 Jy
! Component: 2300  -  total flux cleaned = -0.000349203 Jy
! Component: 2350  -  total flux cleaned = -0.000348963 Jy
! Component: 2400  -  total flux cleaned = -0.000304563 Jy
! Component: 2450  -  total flux cleaned = -0.000304533 Jy
! Component: 2500  -  total flux cleaned = -0.000260741 Jy
! Component: 2550  -  total flux cleaned = -0.000282392 Jy
! Component: 2600  -  total flux cleaned = -0.000239325 Jy
! Component: 2650  -  total flux cleaned = -0.000175646 Jy
! Component: 2700  -  total flux cleaned = -0.000217723 Jy
! Component: 2750  -  total flux cleaned = -0.000113477 Jy
! Component: 2800  -  total flux cleaned = -0.000113649 Jy
! Component: 2850  -  total flux cleaned = -9.2848e-05 Jy
! Component: 2900  -  total flux cleaned = -9.30092e-05 Jy
! Component: 2950  -  total flux cleaned = -3.25246e-05 Jy
! Component: 3000  -  total flux cleaned = -1.2593e-05 Jy
! Component: 3050  -  total flux cleaned = 7.14737e-06 Jy
! Component: 3100  -  total flux cleaned = 6.94342e-06 Jy
! Component: 3150  -  total flux cleaned = 4.60336e-05 Jy
! Component: 3200  -  total flux cleaned = 8.47991e-05 Jy
! Component: 3250  -  total flux cleaned = 0.000104313 Jy
! Component: 3300  -  total flux cleaned = 0.000238228 Jy
! Component: 3350  -  total flux cleaned = 0.000276182 Jy
! Component: 3400  -  total flux cleaned = 0.000276358 Jy
! Component: 3450  -  total flux cleaned = 0.000351335 Jy
! Component: 3500  -  total flux cleaned = 0.000462969 Jy
! Component: 3550  -  total flux cleaned = 0.000481418 Jy
! Component: 3600  -  total flux cleaned = 0.000591399 Jy
! Component: 3650  -  total flux cleaned = 0.000536942 Jy
! Component: 3700  -  total flux cleaned = 0.000681331 Jy
! Component: 3750  -  total flux cleaned = 0.000627582 Jy
! Component: 3800  -  total flux cleaned = 0.000716718 Jy
! Component: 3850  -  total flux cleaned = 0.000752048 Jy
! Component: 3900  -  total flux cleaned = 0.000822186 Jy
! Component: 3950  -  total flux cleaned = 0.000857034 Jy
! Component: 4000  -  total flux cleaned = 0.000822127 Jy
! Component: 4050  -  total flux cleaned = 0.000873575 Jy
! Total flux subtracted in 4096 components = 0.000907791 Jy
! Clean residual min=-0.001124 max=0.000927 Jy/beam
! Clean residual mean=0.000000 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.241295 Jy
keep
! Adding 271 model components to the UV plane model.
! The established model now contains 367 components and 0.241295 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0559-1817_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.434 x 8.127 at -0.6671 degrees (North through East)
! Clean map  min=-0.0036985  max=0.20516 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0559-1817_S_map.fits
wmodel /image_prod/ug002_uva//J0559-1817_S_map.mod
! Writing 367 model components to file: /image_prod/ug002_uva//J0559-1817_S_map.mod
wobs   /image_prod/ug002_uva//J0559-1817_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0559-1817_S_uvs.fits
wwins  /image_prod/ug002_uva//J0559-1817_S_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J0559-1817_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.205161 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000296541 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.433621 0.433621 0.867242 1.73448 3.46897 6.93794 13.8759 27.7518 55.5035
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.205 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  691.848 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0559-1817_S_dfm.log closed on Wed Mar  4 21:07:00 2020