! Started logfile: /image_prod/ug002_uva//J0555+3948_X_l_dfm.log on Wed Mar 4 21:05:08 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0555+3948_X_l_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0555+3948_X_l_uva.fits ! AN table 1: 24 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.800595 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 6456 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0555+3948_X_l] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.408180Jy sigma=7.862952 ! Fit after self-cal, rms=1.338450Jy sigma=3.861614 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5685 mas, bmaj=1.148 mas, bpa=1.369 degrees ! Estimated noise=2.81068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.14911 Jy ! Component: 100 - total flux cleaned = 1.66248 Jy ! Total flux subtracted in 100 components = 1.66248 Jy ! Clean residual min=-0.108598 max=0.335431 Jy/beam ! Clean residual mean=0.000045 rms=0.023506 Jy/beam ! Combined flux in latest and established models = 1.66248 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.66248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.880474Jy sigma=2.518007 ! Fit after self-cal, rms=0.874978Jy sigma=2.498906 ! Inverting map ! Added new window around map position (-0.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.361748 Jy ! Component: 100 - total flux cleaned = 0.58532 Jy ! Total flux subtracted in 100 components = 0.58532 Jy ! Clean residual min=-0.068078 max=0.125342 Jy/beam ! Clean residual mean=0.000032 rms=0.012877 Jy/beam ! Combined flux in latest and established models = 2.2478 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 2.2478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.520847Jy sigma=1.452116 ! Fit after self-cal, rms=0.513503Jy sigma=1.427634 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165693 Jy ! Component: 100 - total flux cleaned = 0.286998 Jy ! Total flux subtracted in 100 components = 0.286998 Jy ! Clean residual min=-0.049594 max=0.069530 Jy/beam ! Clean residual mean=0.000025 rms=0.008968 Jy/beam ! Combined flux in latest and established models = 2.5348 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 2.5348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.366174Jy sigma=1.025549 ! Fit after self-cal, rms=0.365052Jy sigma=1.021994 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0934373 Jy ! Component: 100 - total flux cleaned = 0.165867 Jy ! Total flux subtracted in 100 components = 0.165867 Jy ! Clean residual min=-0.042637 max=0.052378 Jy/beam ! Clean residual mean=0.000020 rms=0.007325 Jy/beam ! Combined flux in latest and established models = 2.70067 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 2.70067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.298598Jy sigma=0.844136 ! Fit after self-cal, rms=0.297871Jy sigma=0.842366 ! Inverting map ! Added new window around map position (-5.4, -10.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608292 Jy ! Component: 100 - total flux cleaned = 0.108493 Jy ! Total flux subtracted in 100 components = 0.108493 Jy ! Clean residual min=-0.038088 max=0.045723 Jy/beam ! Clean residual mean=0.000018 rms=0.006468 Jy/beam ! Combined flux in latest and established models = 2.80916 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 2.80916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.264652Jy sigma=0.752923 ! Fit after self-cal, rms=0.264082Jy sigma=0.750836 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469364 Jy ! Component: 100 - total flux cleaned = 0.082452 Jy ! Total flux subtracted in 100 components = 0.082452 Jy ! Clean residual min=-0.032363 max=0.041092 Jy/beam ! Clean residual mean=0.000016 rms=0.005831 Jy/beam ! Combined flux in latest and established models = 2.89161 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 2.89161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.243919Jy sigma=0.692661 ! Fit after self-cal, rms=0.243503Jy sigma=0.690738 ! Inverting map ! Added new window around map position (-1.8, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385405 Jy ! Component: 100 - total flux cleaned = 0.0676933 Jy ! Total flux subtracted in 100 components = 0.0676933 Jy ! Clean residual min=-0.026886 max=0.026399 Jy/beam ! Clean residual mean=0.000016 rms=0.005358 Jy/beam ! Combined flux in latest and established models = 2.9593 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 2.9593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.228386Jy sigma=0.649257 ! Fit after self-cal, rms=0.228220Jy sigma=0.648658 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6671 mas, bmaj=1.294 mas, bpa=2.227 degrees ! Estimated noise=2.39723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447433 Jy ! Component: 100 - total flux cleaned = 0.080837 Jy ! Component: 150 - total flux cleaned = 0.111802 Jy ! Component: 200 - total flux cleaned = 0.138705 Jy ! Total flux subtracted in 200 components = 0.138705 Jy ! Clean residual min=-0.031562 max=0.032889 Jy/beam ! Clean residual mean=0.000033 rms=0.007226 Jy/beam ! Combined flux in latest and established models = 3.09801 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 57 components and 3.09801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.204666Jy sigma=0.596303 ! Fit after self-cal, rms=0.204505Jy sigma=0.595535 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6671 x 1.294 at 2.227 degrees (North through East) ! Clean map min=-0.029482 max=1.6994 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.97 KP 1.01 ! MK 1.06 NL 1.07 OV 0.88 SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.00 KP 1.01 ! MK 1.01 NL 1.11 OV 0.90 SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.98 KP 1.03 ! MK 1.02 NL 1.08 OV 0.89 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.02 KP 1.02 ! MK 1.04 NL 1.05 OV 0.90 SC 1.03 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.00 KP 1.03 ! MK 1.02 NL 1.07 OV 0.91 SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.02 KP 1.03 ! MK 1.01 NL 1.07 OV 0.91 SC 0.99 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.00 KP 1.02 ! MK 1.00 NL 1.07 OV 0.91 SC 1.04 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.00 KP 1.05 ! MK 0.98 NL 1.06 OV 0.92 SC 1.01 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.01 KP 1.02 ! MK 1.02 NL 1.09 OV 0.89 SC 1.03 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 1.02 ! MK 1.03 NL 1.11 OV 0.91 SC 1.01 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.00 KP 1.04 ! MK 1.01 NL 1.09 OV 0.91 SC 1.03 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.04 KP 0.99 ! MK 1.08 NL 1.10 OV 0.93 SC 1.00 ! ! ! Fit before self-cal, rms=0.204505Jy sigma=0.595535 ! Fit after self-cal, rms=0.111776Jy sigma=0.364871 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.675 mas, bmaj=1.299 mas, bpa=2.189 degrees ! Estimated noise=2.41399 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0114029 Jy ! Component: 100 - total flux cleaned = -0.0108838 Jy ! Component: 150 - total flux cleaned = -0.00750965 Jy ! Component: 200 - total flux cleaned = -0.00575751 Jy ! Total flux subtracted in 200 components = -0.00575751 Jy ! Clean residual min=-0.013827 max=0.015691 Jy/beam ! Clean residual mean=0.000004 rms=0.003493 Jy/beam ! Combined flux in latest and established models = 3.09225 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 3.09225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106350Jy sigma=0.343356 ! Fit after self-cal, rms=0.106304Jy sigma=0.343027 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106304Jy sigma=0.343027 ! Fit after self-cal, rms=0.076525Jy sigma=0.265421 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6754 mas, bmaj=1.299 mas, bpa=1.956 degrees ! Estimated noise=2.41457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00798525 Jy ! Component: 100 - total flux cleaned = -0.00852457 Jy ! Component: 150 - total flux cleaned = -0.00761851 Jy ! Component: 200 - total flux cleaned = -0.007027 Jy ! Total flux subtracted in 200 components = -0.007027 Jy ! Clean residual min=-0.009313 max=0.007290 Jy/beam ! Clean residual mean=0.000002 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 3.08523 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 3.08523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074553Jy sigma=0.257190 ! Fit after self-cal, rms=0.074274Jy sigma=0.256810 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133718 Jy ! Component: 100 - total flux cleaned = 0.000374512 Jy ! Component: 150 - total flux cleaned = 0.000843267 Jy ! Component: 200 - total flux cleaned = 0.00141135 Jy ! Total flux subtracted in 200 components = 0.00141135 Jy ! Clean residual min=-0.008894 max=0.007215 Jy/beam ! Clean residual mean=0.000002 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 3.08664 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 3.08664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073635Jy sigma=0.253817 ! Fit after self-cal, rms=0.073509Jy sigma=0.253648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073509Jy sigma=0.253648 ! Fit after self-cal, rms=0.070393Jy sigma=0.246888 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6751 mas, bmaj=1.299 mas, bpa=1.979 degrees ! Estimated noise=2.41369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00607554 Jy ! Component: 100 - total flux cleaned = -0.00646214 Jy ! Component: 150 - total flux cleaned = -0.00629689 Jy ! Component: 200 - total flux cleaned = -0.00584278 Jy ! Total flux subtracted in 200 components = -0.00584278 Jy ! Clean residual min=-0.007060 max=0.006080 Jy/beam ! Clean residual mean=0.000002 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 3.08079 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 3.08079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069331Jy sigma=0.243257 ! Fit after self-cal, rms=0.069218Jy sigma=0.243124 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000718605 Jy ! Component: 100 - total flux cleaned = -0.000196255 Jy ! Component: 150 - total flux cleaned = 0.000276356 Jy ! Component: 200 - total flux cleaned = 0.000603987 Jy ! Total flux subtracted in 200 components = 0.000603987 Jy ! Clean residual min=-0.006689 max=0.005874 Jy/beam ! Clean residual mean=0.000002 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 3.0814 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 3.0814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068813Jy sigma=0.241429 ! Fit after self-cal, rms=0.068741Jy sigma=0.241346 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068741Jy sigma=0.241346 ! Fit after self-cal, rms=0.067811Jy sigma=0.240122 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.629 mas, bmaj=2.087 mas, bpa=1.992 degrees ! Estimated noise=4.60705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536863 Jy ! Component: 100 - total flux cleaned = 0.00675779 Jy ! Component: 150 - total flux cleaned = 0.00713093 Jy ! Component: 200 - total flux cleaned = 0.00741894 Jy ! Total flux subtracted in 200 components = 0.00741894 Jy ! Clean residual min=-0.011369 max=0.010186 Jy/beam ! Clean residual mean=0.000003 rms=0.002739 Jy/beam ! Combined flux in latest and established models = 3.08882 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 3.08882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067065Jy sigma=0.239244 ! Fit after self-cal, rms=0.067008Jy sigma=0.239075 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199873 Jy ! Component: 100 - total flux cleaned = 0.000134307 Jy ! Component: 150 - total flux cleaned = 0.000136055 Jy ! Component: 200 - total flux cleaned = 0.000140086 Jy ! Total flux subtracted in 200 components = 0.000140086 Jy ! Clean residual min=-0.010814 max=0.009914 Jy/beam ! Clean residual mean=0.000002 rms=0.002672 Jy/beam ! Combined flux in latest and established models = 3.08896 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 3.08896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066833Jy sigma=0.238807 ! Fit after self-cal, rms=0.066823Jy sigma=0.238757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.6749 mas, bmaj=1.298 mas, bpa=2.024 degrees ! Estimated noise=2.41283 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6749 x 1.298 at 2.024 degrees (North through East) ! Clean map min=-0.0057638 max=1.7093 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066823Jy sigma=0.238757 ! Fit after self-cal, rms=0.060302Jy sigma=0.212348 ! Inverting map and beam ! Estimated beam: bmin=0.6747 mas, bmaj=1.296 mas, bpa=2.096 degrees ! Estimated noise=2.41202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00364107 Jy ! Component: 100 - total flux cleaned = -0.00463861 Jy ! Component: 150 - total flux cleaned = -0.00476702 Jy ! Component: 200 - total flux cleaned = -0.00498889 Jy ! Total flux subtracted in 200 components = -0.00498889 Jy ! Clean residual min=-0.005550 max=0.004773 Jy/beam ! Clean residual mean=0.000001 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 3.08397 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 3.08397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059754Jy sigma=0.209788 ! Fit after self-cal, rms=0.059637Jy sigma=0.209659 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000931378 Jy ! Component: 100 - total flux cleaned = -0.000641998 Jy ! Component: 150 - total flux cleaned = -0.000549252 Jy ! Component: 200 - total flux cleaned = -0.000375859 Jy ! Total flux subtracted in 200 components = -0.000375859 Jy ! Clean residual min=-0.005379 max=0.004701 Jy/beam ! Clean residual mean=0.000001 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 3.08359 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 110 components and 3.08359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059394Jy sigma=0.208341 ! Fit after self-cal, rms=0.059336Jy sigma=0.208273 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059336Jy sigma=0.208273 ! Fit after self-cal, rms=0.058858Jy sigma=0.207726 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5714 mas, bmaj=1.148 mas, bpa=1.609 degrees ! Estimated noise=2.85184 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.15726 Jy ! Component: 100 - total flux cleaned = 1.70375 Jy ! Component: 150 - total flux cleaned = 2.03475 Jy ! Component: 200 - total flux cleaned = 2.25427 Jy ! Total flux subtracted in 200 components = 2.25427 Jy ! Clean residual min=-0.052857 max=0.124474 Jy/beam ! Clean residual mean=0.000025 rms=0.011221 Jy/beam ! Combined flux in latest and established models = 2.25427 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 2.25427 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6746 mas, bmaj=1.296 mas, bpa=2.123 degrees ! Estimated noise=2.41145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.235495 Jy ! Component: 100 - total flux cleaned = 0.38496 Jy ! Component: 150 - total flux cleaned = 0.484924 Jy ! Component: 200 - total flux cleaned = 0.552998 Jy ! Total flux subtracted in 200 components = 0.552998 Jy ! Clean residual min=-0.017817 max=0.037549 Jy/beam ! Clean residual mean=0.000017 rms=0.004454 Jy/beam ! Combined flux in latest and established models = 2.80726 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 29 components and 2.80726 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479843 Jy ! Component: 100 - total flux cleaned = 0.0832343 Jy ! Component: 150 - total flux cleaned = 0.110451 Jy ! Component: 200 - total flux cleaned = 0.132375 Jy ! Total flux subtracted in 200 components = 0.132375 Jy ! Clean residual min=-0.011652 max=0.019699 Jy/beam ! Clean residual mean=0.000007 rms=0.002346 Jy/beam ! Combined flux in latest and established models = 2.93964 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 2.93964 Jy ! Inverting map ! Added new window around map position (0.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200924 Jy ! Component: 100 - total flux cleaned = 0.0357298 Jy ! Component: 150 - total flux cleaned = 0.0490407 Jy ! Component: 200 - total flux cleaned = 0.0605146 Jy ! Total flux subtracted in 200 components = 0.0605146 Jy ! Clean residual min=-0.008217 max=0.009374 Jy/beam ! Clean residual mean=0.000004 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 3.00015 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 54 components and 3.00015 Jy ! Inverting map ! Added new window around map position (-0.8, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011033 Jy ! Component: 100 - total flux cleaned = 0.0200978 Jy ! Component: 150 - total flux cleaned = 0.0280314 Jy ! Component: 200 - total flux cleaned = 0.0345463 Jy ! Total flux subtracted in 200 components = 0.0345463 Jy ! Clean residual min=-0.006539 max=0.006911 Jy/beam ! Clean residual mean=0.000002 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 3.0347 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 69 components and 3.0347 Jy ! Inverting map ! Added new window around map position (7.4, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675932 Jy ! Component: 100 - total flux cleaned = 0.0105372 Jy ! Component: 150 - total flux cleaned = 0.0140358 Jy ! Component: 200 - total flux cleaned = 0.0174799 Jy ! Total flux subtracted in 200 components = 0.0174799 Jy ! Clean residual min=-0.005481 max=0.006075 Jy/beam ! Clean residual mean=0.000001 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 3.05218 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 77 components and 3.05218 Jy ! Inverting map ! Added new window around map position (-2.6, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00556556 Jy ! Component: 100 - total flux cleaned = 0.0094622 Jy ! Component: 150 - total flux cleaned = 0.0120378 Jy ! Component: 200 - total flux cleaned = 0.0144543 Jy ! Total flux subtracted in 200 components = 0.0144543 Jy ! Clean residual min=-0.005039 max=0.004772 Jy/beam ! Clean residual mean=0.000001 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 3.06663 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 93 components and 3.06663 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.629 mas, bmaj=2.085 mas, bpa=2.103 degrees ! Estimated noise=4.6149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00783392 Jy ! Component: 100 - total flux cleaned = 0.0131715 Jy ! Component: 150 - total flux cleaned = 0.0169242 Jy ! Component: 200 - total flux cleaned = 0.0194916 Jy ! Total flux subtracted in 200 components = 0.0194916 Jy ! Clean residual min=-0.008359 max=0.008754 Jy/beam ! Clean residual mean=-0.000000 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 3.08613 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234709 Jy ! Component: 100 - total flux cleaned = 0.00450304 Jy ! Component: 150 - total flux cleaned = 0.00638693 Jy ! Component: 200 - total flux cleaned = 0.00780959 Jy ! Total flux subtracted in 200 components = 0.00780959 Jy ! Clean residual min=-0.008011 max=0.008650 Jy/beam ! Clean residual mean=-0.000002 rms=0.002098 Jy/beam ! Combined flux in latest and established models = 3.09394 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 141 components and 3.09394 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6746 mas, bmaj=1.296 mas, bpa=2.123 degrees ! Estimated noise=2.41145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102201 Jy ! Component: 100 - total flux cleaned = -0.000458503 Jy ! Component: 150 - total flux cleaned = 0.000168069 Jy ! Component: 200 - total flux cleaned = 0.000619548 Jy ! Total flux subtracted in 200 components = 0.000619548 Jy ! Clean residual min=-0.005220 max=0.004139 Jy/beam ! Clean residual mean=-0.000001 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 3.09455 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 145 components and 3.09455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057917Jy sigma=0.206683 ! Fit after self-cal, rms=0.057659Jy sigma=0.205946 wmodel J0555+3948_X_l_map.mod ! Writing 145 model components to file: J0555+3948_X_l_map.mod wobs J0555+3948_X_l_uvs.fits ! Writing UV FITS file: J0555+3948_X_l_uvs.fits wwins J0555+3948_X_l_map.win ! wwins: Wrote 9 windows to J0555+3948_X_l_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117859 Jy ! Component: 100 - total flux cleaned = -0.00133401 Jy ! Component: 150 - total flux cleaned = -0.0011898 Jy ! Component: 200 - total flux cleaned = -0.00112152 Jy ! Component: 250 - total flux cleaned = -0.00132202 Jy ! Component: 300 - total flux cleaned = -0.00138572 Jy ! Component: 350 - total flux cleaned = -0.00132128 Jy ! Component: 400 - total flux cleaned = -0.00138514 Jy ! Component: 450 - total flux cleaned = -0.00138386 Jy ! Component: 500 - total flux cleaned = -0.00138322 Jy ! Component: 550 - total flux cleaned = -0.00144246 Jy ! Component: 600 - total flux cleaned = -0.00138474 Jy ! Component: 650 - total flux cleaned = -0.00138404 Jy ! Component: 700 - total flux cleaned = -0.00138205 Jy ! Component: 750 - total flux cleaned = -0.00105035 Jy ! Component: 800 - total flux cleaned = -0.000941147 Jy ! Component: 850 - total flux cleaned = -0.000781845 Jy ! Component: 900 - total flux cleaned = -0.000729046 Jy ! Component: 950 - total flux cleaned = -0.000520834 Jy ! Component: 1000 - total flux cleaned = -0.000416788 Jy ! Component: 1050 - total flux cleaned = -0.000366106 Jy ! Component: 1100 - total flux cleaned = -6.69887e-05 Jy ! Component: 1150 - total flux cleaned = -6.86224e-05 Jy ! Component: 1200 - total flux cleaned = -0.000310426 Jy ! Component: 1250 - total flux cleaned = -2.24961e-05 Jy ! Component: 1300 - total flux cleaned = 2.53123e-05 Jy ! Component: 1350 - total flux cleaned = 7.26767e-05 Jy ! Component: 1400 - total flux cleaned = 0.000164739 Jy ! Component: 1450 - total flux cleaned = 0.000256048 Jy ! Component: 1500 - total flux cleaned = 0.000346058 Jy ! Component: 1550 - total flux cleaned = 0.000435752 Jy ! Component: 1600 - total flux cleaned = 0.000304061 Jy ! Component: 1650 - total flux cleaned = 0.000391441 Jy ! Component: 1700 - total flux cleaned = 0.000390626 Jy ! Component: 1750 - total flux cleaned = 0.000348345 Jy ! Component: 1800 - total flux cleaned = 0.000770554 Jy ! Component: 1850 - total flux cleaned = 0.000518828 Jy ! Component: 1900 - total flux cleaned = 0.000519156 Jy ! Component: 1950 - total flux cleaned = 0.000559627 Jy ! Component: 2000 - total flux cleaned = 0.00060023 Jy ! Component: 2050 - total flux cleaned = 0.000520263 Jy ! Component: 2100 - total flux cleaned = 0.000678481 Jy ! Component: 2150 - total flux cleaned = 0.000718156 Jy ! Component: 2200 - total flux cleaned = 0.000601262 Jy ! Component: 2250 - total flux cleaned = 0.000678488 Jy ! Component: 2300 - total flux cleaned = 0.000716341 Jy ! Component: 2350 - total flux cleaned = 0.000678292 Jy ! Component: 2400 - total flux cleaned = 0.000752874 Jy ! Component: 2450 - total flux cleaned = 0.000863804 Jy ! Component: 2500 - total flux cleaned = 0.00064369 Jy ! Component: 2550 - total flux cleaned = 0.000680564 Jy ! Component: 2600 - total flux cleaned = 0.00068044 Jy ! Component: 2650 - total flux cleaned = 0.000787695 Jy ! Component: 2700 - total flux cleaned = 0.000610916 Jy ! Component: 2750 - total flux cleaned = 0.000646448 Jy ! Component: 2800 - total flux cleaned = 0.00071569 Jy ! Component: 2850 - total flux cleaned = 0.00068094 Jy ! Component: 2900 - total flux cleaned = 0.00057893 Jy ! Component: 2950 - total flux cleaned = 0.000545963 Jy ! Component: 3000 - total flux cleaned = 0.000445828 Jy ! Component: 3050 - total flux cleaned = 0.00047902 Jy ! Component: 3100 - total flux cleaned = 0.000512012 Jy ! Component: 3150 - total flux cleaned = 0.000479263 Jy ! Component: 3200 - total flux cleaned = 0.000446649 Jy ! Component: 3250 - total flux cleaned = 0.000414554 Jy ! Component: 3300 - total flux cleaned = 0.00038257 Jy ! Component: 3350 - total flux cleaned = 0.000288066 Jy ! Component: 3400 - total flux cleaned = 0.00028859 Jy ! Component: 3450 - total flux cleaned = 0.000164697 Jy ! Component: 3500 - total flux cleaned = 0.000196223 Jy ! Component: 3550 - total flux cleaned = 0.000165774 Jy ! Component: 3600 - total flux cleaned = 0.000196155 Jy ! Component: 3650 - total flux cleaned = 0.000286665 Jy ! Component: 3700 - total flux cleaned = 7.83565e-05 Jy ! Component: 3750 - total flux cleaned = 0.000167164 Jy ! Component: 3800 - total flux cleaned = 0.000313914 Jy ! Component: 3850 - total flux cleaned = 0.000168401 Jy ! Component: 3900 - total flux cleaned = 2.4107e-05 Jy ! Component: 3950 - total flux cleaned = -3.29685e-05 Jy ! Component: 4000 - total flux cleaned = 5.25955e-05 Jy ! Component: 4050 - total flux cleaned = 8.12338e-05 Jy ! Total flux subtracted in 4096 components = -3.17945e-06 Jy ! Clean residual min=-0.001481 max=0.001397 Jy/beam ! Clean residual mean=-0.000000 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 3.09455 Jy keep ! Adding 351 model components to the UV plane model. ! The established model now contains 496 components and 3.09455 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0555+3948_X_l_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6746 x 1.296 at 2.123 degrees (North through East) ! Clean map min=-0.0036001 max=1.7249 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0555+3948_X_l_map.fits wmodel /image_prod/ug002_uva//J0555+3948_X_l_map.mod ! Writing 496 model components to file: /image_prod/ug002_uva//J0555+3948_X_l_map.mod wobs /image_prod/ug002_uva//J0555+3948_X_l_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0555+3948_X_l_uvs.fits wwins /image_prod/ug002_uva//J0555+3948_X_l_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0555+3948_X_l_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.72486 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000472184 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0821256 0.0821256 0.164251 0.328503 0.657005 1.31401 2.62802 5.25604 10.5121 21.0242 42.0483 84.0967 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.724 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3652.94 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0555+3948_X_l_dfm.log closed on Wed Mar 4 21:05:13 2020