! Started logfile: /image_prod/ug002_uva//J0555+3948_X_k_dfm.log on Wed Mar 4 21:05:03 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0555+3948_X_k_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0555+3948_X_k_uva.fits ! AN table 1: 18 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.702381 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 4248 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0555+3948_X_k] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.614320Jy sigma=7.940172 ! Fit after self-cal, rms=1.522838Jy sigma=4.127494 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6323 mas, bmaj=1.346 mas, bpa=-4.591 degrees ! Estimated noise=4.08339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28925 Jy ! Component: 100 - total flux cleaned = 1.82577 Jy ! Total flux subtracted in 100 components = 1.82577 Jy ! Clean residual min=-0.147149 max=0.332435 Jy/beam ! Clean residual mean=0.000049 rms=0.032692 Jy/beam ! Combined flux in latest and established models = 1.82577 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.82577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.923600Jy sigma=2.510155 ! Fit after self-cal, rms=0.918770Jy sigma=2.491377 ! Inverting map ! Added new window around map position (-0.6, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.366955 Jy ! Component: 100 - total flux cleaned = 0.583908 Jy ! Total flux subtracted in 100 components = 0.583908 Jy ! Clean residual min=-0.086274 max=0.119582 Jy/beam ! Clean residual mean=0.000033 rms=0.020518 Jy/beam ! Combined flux in latest and established models = 2.40968 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 2.40968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.558650Jy sigma=1.562469 ! Fit after self-cal, rms=0.551166Jy sigma=1.533544 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147428 Jy ! Component: 100 - total flux cleaned = 0.248242 Jy ! Total flux subtracted in 100 components = 0.248242 Jy ! Clean residual min=-0.078505 max=0.096835 Jy/beam ! Clean residual mean=0.000026 rms=0.017533 Jy/beam ! Combined flux in latest and established models = 2.65792 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 2.65792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.435548Jy sigma=1.295491 ! Fit after self-cal, rms=0.434403Jy sigma=1.291689 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7563 mas, bmaj=1.576 mas, bpa=-2.173 degrees ! Estimated noise=3.24105 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152036 Jy ! Component: 100 - total flux cleaned = 0.256498 Jy ! Component: 150 - total flux cleaned = 0.336987 Jy ! Component: 200 - total flux cleaned = 0.40024 Jy ! Total flux subtracted in 200 components = 0.40024 Jy ! Clean residual min=-0.074610 max=0.104034 Jy/beam ! Clean residual mean=0.000013 rms=0.018688 Jy/beam ! Combined flux in latest and established models = 3.05816 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 43 components and 3.05816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.322516Jy sigma=1.059482 ! Fit after self-cal, rms=0.317923Jy sigma=1.044280 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7563 x 1.576 at -2.173 degrees (North through East) ! Clean map min=-0.068188 max=1.8552 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 KP 0.99 MK 0.96 ! NL 1.05 OV 0.87 PT 0.93 SC 1.25 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 KP 0.97 MK 0.98 ! NL 1.08 OV 0.88 PT 0.94 SC 1.25 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 KP 0.97 MK 0.99 ! NL 1.08 OV 0.85 PT 0.95 SC 1.28 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 KP 0.96 MK 0.97 ! NL 1.05 OV 0.89 PT 0.97 SC 1.26 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 KP 0.95 MK 0.97 ! NL 1.11 OV 0.89 PT 0.95 SC 1.25 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 KP 0.98 MK 0.98 ! NL 1.07 OV 0.87 PT 0.92 SC 1.29 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 KP 0.98 MK 0.98 ! NL 1.09 OV 0.88 PT 0.94 SC 1.27 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 KP 0.97 MK 0.98 ! NL 1.04 OV 0.90 PT 0.93 SC 1.27 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 KP 0.98 MK 1.00 ! NL 1.09 OV 0.89 PT 0.92 SC 1.28 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 KP 0.99 MK 1.01 ! NL 1.06 OV 0.88 PT 0.99 SC 1.26 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 KP 0.98 MK 1.01 ! NL 1.10 OV 0.89 PT 0.94 SC 1.28 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 KP 0.95 MK 1.05 ! NL 1.08 OV 0.89 PT 0.97 SC 1.26 ! ! ! Fit before self-cal, rms=0.317923Jy sigma=1.044280 ! Fit after self-cal, rms=0.182204Jy sigma=0.611667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7998 mas, bmaj=1.597 mas, bpa=-3.809 degrees ! Estimated noise=3.34591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 23.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483856 Jy ! Component: 100 - total flux cleaned = -0.00740744 Jy ! Component: 150 - total flux cleaned = -0.00979892 Jy ! Component: 200 - total flux cleaned = -0.0137286 Jy ! Total flux subtracted in 200 components = -0.0137286 Jy ! Clean residual min=-0.036852 max=0.036431 Jy/beam ! Clean residual mean=0.000004 rms=0.007940 Jy/beam ! Combined flux in latest and established models = 3.04443 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 3.04443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.161870Jy sigma=0.519678 ! Fit after self-cal, rms=0.160641Jy sigma=0.515076 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.160641Jy sigma=0.515076 ! Fit after self-cal, rms=0.111660Jy sigma=0.340510 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7859 mas, bmaj=1.606 mas, bpa=-2.426 degrees ! Estimated noise=3.32341 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00496096 Jy ! Component: 100 - total flux cleaned = -0.00780012 Jy ! Component: 150 - total flux cleaned = -0.0104993 Jy ! Component: 200 - total flux cleaned = -0.0138171 Jy ! Total flux subtracted in 200 components = -0.0138171 Jy ! Clean residual min=-0.017890 max=0.017198 Jy/beam ! Clean residual mean=0.000004 rms=0.003782 Jy/beam ! Combined flux in latest and established models = 3.03061 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 3.03061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100950Jy sigma=0.307894 ! Fit after self-cal, rms=0.099471Jy sigma=0.305185 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00398179 Jy ! Component: 100 - total flux cleaned = -0.00665372 Jy ! Component: 150 - total flux cleaned = -0.00792238 Jy ! Component: 200 - total flux cleaned = -0.00878972 Jy ! Total flux subtracted in 200 components = -0.00878972 Jy ! Clean residual min=-0.016204 max=0.015727 Jy/beam ! Clean residual mean=0.000004 rms=0.003536 Jy/beam ! Combined flux in latest and established models = 3.02182 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 3.02182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096378Jy sigma=0.296419 ! Fit after self-cal, rms=0.095967Jy sigma=0.295784 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095967Jy sigma=0.295784 ! Fit after self-cal, rms=0.091524Jy sigma=0.285406 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7833 mas, bmaj=1.607 mas, bpa=-2.213 degrees ! Estimated noise=3.31598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00606871 Jy ! Component: 100 - total flux cleaned = -0.00806108 Jy ! Component: 150 - total flux cleaned = -0.0103604 Jy ! Component: 200 - total flux cleaned = -0.0115169 Jy ! Total flux subtracted in 200 components = -0.0115169 Jy ! Clean residual min=-0.014134 max=0.013298 Jy/beam ! Clean residual mean=0.000004 rms=0.002965 Jy/beam ! Combined flux in latest and established models = 3.01031 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 3.01031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087297Jy sigma=0.273797 ! Fit after self-cal, rms=0.086800Jy sigma=0.273036 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158944 Jy ! Component: 100 - total flux cleaned = -0.00310698 Jy ! Component: 150 - total flux cleaned = -0.0035518 Jy ! Component: 200 - total flux cleaned = -0.0041888 Jy ! Total flux subtracted in 200 components = -0.0041888 Jy ! Clean residual min=-0.013687 max=0.012773 Jy/beam ! Clean residual mean=0.000004 rms=0.002853 Jy/beam ! Combined flux in latest and established models = 3.00612 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 83 components and 3.00612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085337Jy sigma=0.268677 ! Fit after self-cal, rms=0.085175Jy sigma=0.268394 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085175Jy sigma=0.268394 ! Fit after self-cal, rms=0.083145Jy sigma=0.264141 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.936 mas, bmaj=2.448 mas, bpa=8.226 degrees ! Estimated noise=5.25347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00357071 Jy ! Component: 100 - total flux cleaned = -0.00270415 Jy ! Component: 150 - total flux cleaned = -0.0027008 Jy ! Component: 200 - total flux cleaned = -0.00290407 Jy ! Total flux subtracted in 200 components = -0.00290407 Jy ! Clean residual min=-0.015881 max=0.013888 Jy/beam ! Clean residual mean=0.000008 rms=0.003614 Jy/beam ! Combined flux in latest and established models = 3.00321 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 99 components and 3.00321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081318Jy sigma=0.261636 ! Fit after self-cal, rms=0.081047Jy sigma=0.261213 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155269 Jy ! Component: 100 - total flux cleaned = -0.00194375 Jy ! Component: 150 - total flux cleaned = -0.00213612 Jy ! Component: 200 - total flux cleaned = -0.00265141 Jy ! Total flux subtracted in 200 components = -0.00265141 Jy ! Clean residual min=-0.014687 max=0.013253 Jy/beam ! Clean residual mean=0.000008 rms=0.003495 Jy/beam ! Combined flux in latest and established models = 3.00056 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 106 components and 3.00056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080324Jy sigma=0.260499 ! Fit after self-cal, rms=0.080279Jy sigma=0.260407 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7814 mas, bmaj=1.608 mas, bpa=-2.033 degrees ! Estimated noise=3.30915 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7814 x 1.608 at -2.033 degrees (North through East) ! Clean map min=-0.013857 max=1.8641 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080279Jy sigma=0.260407 ! Fit after self-cal, rms=0.073762Jy sigma=0.237291 ! Inverting map and beam ! Estimated beam: bmin=0.7806 mas, bmaj=1.607 mas, bpa=-1.981 degrees ! Estimated noise=3.30493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00341274 Jy ! Component: 100 - total flux cleaned = -0.005024 Jy ! Component: 150 - total flux cleaned = -0.00658813 Jy ! Component: 200 - total flux cleaned = -0.00739043 Jy ! Total flux subtracted in 200 components = -0.00739043 Jy ! Clean residual min=-0.011019 max=0.011570 Jy/beam ! Clean residual mean=0.000003 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 2.99317 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 115 components and 2.99317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072014Jy sigma=0.230026 ! Fit after self-cal, rms=0.071853Jy sigma=0.229739 ! Inverting map ! Added new window around map position (-3, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339725 Jy ! Component: 100 - total flux cleaned = 0.00186082 Jy ! Component: 150 - total flux cleaned = 0.0020713 Jy ! Component: 200 - total flux cleaned = 0.0022595 Jy ! Total flux subtracted in 200 components = 0.0022595 Jy ! Clean residual min=-0.010017 max=0.010655 Jy/beam ! Clean residual mean=0.000003 rms=0.002163 Jy/beam ! Combined flux in latest and established models = 2.99543 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 129 components and 2.99543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069882Jy sigma=0.221593 ! Fit after self-cal, rms=0.069827Jy sigma=0.221051 ! Inverting map ! Added new window around map position (0, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00921706 Jy ! Component: 100 - total flux cleaned = 0.010118 Jy ! Component: 150 - total flux cleaned = 0.0104867 Jy ! Component: 200 - total flux cleaned = 0.010646 Jy ! Total flux subtracted in 200 components = 0.010646 Jy ! Clean residual min=-0.009158 max=0.008993 Jy/beam ! Clean residual mean=0.000003 rms=0.002016 Jy/beam ! Combined flux in latest and established models = 3.00608 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 148 components and 3.00608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068176Jy sigma=0.215102 ! Fit after self-cal, rms=0.068089Jy sigma=0.214787 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068089Jy sigma=0.214787 ! Fit after self-cal, rms=0.066772Jy sigma=0.212392 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6376 mas, bmaj=1.385 mas, bpa=-3.37 degrees ! Estimated noise=4.2209 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.32153 Jy ! Component: 100 - total flux cleaned = 1.89689 Jy ! Component: 150 - total flux cleaned = 2.22681 Jy ! Component: 200 - total flux cleaned = 2.43381 Jy ! Total flux subtracted in 200 components = 2.43381 Jy ! Clean residual min=-0.055933 max=0.111324 Jy/beam ! Clean residual mean=0.000018 rms=0.012505 Jy/beam ! Combined flux in latest and established models = 2.43381 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 2.43381 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7794 mas, bmaj=1.606 mas, bpa=-1.873 degrees ! Estimated noise=3.29933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201292 Jy ! Component: 100 - total flux cleaned = 0.312722 Jy ! Component: 150 - total flux cleaned = 0.378568 Jy ! Component: 200 - total flux cleaned = 0.421051 Jy ! Total flux subtracted in 200 components = 0.421051 Jy ! Clean residual min=-0.020020 max=0.024872 Jy/beam ! Clean residual mean=0.000003 rms=0.004558 Jy/beam ! Combined flux in latest and established models = 2.85486 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 32 components and 2.85486 Jy ! Inverting map ! Added new window around map position (-1.8, 29.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315477 Jy ! Component: 100 - total flux cleaned = 0.0492695 Jy ! Component: 150 - total flux cleaned = 0.0653665 Jy ! Component: 200 - total flux cleaned = 0.0780013 Jy ! Total flux subtracted in 200 components = 0.0780013 Jy ! Clean residual min=-0.014294 max=0.016274 Jy/beam ! Clean residual mean=0.000002 rms=0.002870 Jy/beam ! Combined flux in latest and established models = 2.93286 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 52 components and 2.93286 Jy ! Inverting map ! Added new window around map position (3.4, -28.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014286 Jy ! Component: 100 - total flux cleaned = 0.0227489 Jy ! Component: 150 - total flux cleaned = 0.0280134 Jy ! Component: 200 - total flux cleaned = 0.0315632 Jy ! Total flux subtracted in 200 components = 0.0315632 Jy ! Clean residual min=-0.011518 max=0.011855 Jy/beam ! Clean residual mean=0.000002 rms=0.002237 Jy/beam ! Combined flux in latest and established models = 2.96442 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 77 components and 2.96442 Jy ! Inverting map ! Added new window around map position (-3.4, 30.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00883287 Jy ! Component: 100 - total flux cleaned = 0.012825 Jy ! Component: 150 - total flux cleaned = 0.0164564 Jy ! Component: 200 - total flux cleaned = 0.0192072 Jy ! Total flux subtracted in 200 components = 0.0192072 Jy ! Clean residual min=-0.009547 max=0.008387 Jy/beam ! Clean residual mean=0.000002 rms=0.001910 Jy/beam ! Combined flux in latest and established models = 2.98363 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 95 components and 2.98363 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.937 mas, bmaj=2.449 mas, bpa=8.491 degrees ! Estimated noise=5.25234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00992519 Jy ! Component: 100 - total flux cleaned = 0.0124592 Jy ! Component: 150 - total flux cleaned = 0.0139155 Jy ! Component: 200 - total flux cleaned = 0.015219 Jy ! Total flux subtracted in 200 components = 0.015219 Jy ! Clean residual min=-0.009228 max=0.010122 Jy/beam ! Clean residual mean=0.000004 rms=0.002674 Jy/beam ! Combined flux in latest and established models = 2.99885 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000968637 Jy ! Component: 100 - total flux cleaned = 0.00149567 Jy ! Component: 150 - total flux cleaned = 0.00215807 Jy ! Component: 200 - total flux cleaned = 0.00292285 Jy ! Total flux subtracted in 200 components = 0.00292285 Jy ! Clean residual min=-0.008723 max=0.009807 Jy/beam ! Clean residual mean=0.000004 rms=0.002511 Jy/beam ! Combined flux in latest and established models = 3.00177 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 144 components and 3.00177 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7794 mas, bmaj=1.606 mas, bpa=-1.873 degrees ! Estimated noise=3.29933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00154861 Jy ! Component: 100 - total flux cleaned = -0.000785318 Jy ! Component: 150 - total flux cleaned = -0.000265322 Jy ! Component: 200 - total flux cleaned = 0.000532073 Jy ! Total flux subtracted in 200 components = 0.000532073 Jy ! Clean residual min=-0.007631 max=0.007620 Jy/beam ! Clean residual mean=0.000002 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 3.00231 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 166 components and 3.0023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063245Jy sigma=0.201871 ! Fit after self-cal, rms=0.062571Jy sigma=0.199868 wmodel J0555+3948_X_k_map.mod ! Writing 166 model components to file: J0555+3948_X_k_map.mod wobs J0555+3948_X_k_uvs.fits ! Writing UV FITS file: J0555+3948_X_k_uvs.fits wwins J0555+3948_X_k_map.win ! wwins: Wrote 9 windows to J0555+3948_X_k_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000356136 Jy ! Component: 100 - total flux cleaned = 0.000772847 Jy ! Component: 150 - total flux cleaned = 0.00239072 Jy ! Component: 200 - total flux cleaned = 0.00337645 Jy ! Component: 250 - total flux cleaned = 0.00432287 Jy ! Component: 300 - total flux cleaned = 0.00482695 Jy ! Component: 350 - total flux cleaned = 0.00502286 Jy ! Component: 400 - total flux cleaned = 0.0051193 Jy ! Component: 450 - total flux cleaned = 0.00530051 Jy ! Component: 500 - total flux cleaned = 0.0053897 Jy ! Component: 550 - total flux cleaned = 0.0059036 Jy ! Component: 600 - total flux cleaned = 0.00615432 Jy ! Component: 650 - total flux cleaned = 0.00664236 Jy ! Component: 700 - total flux cleaned = 0.00680112 Jy ! Component: 750 - total flux cleaned = 0.00703423 Jy ! Component: 800 - total flux cleaned = 0.00726209 Jy ! Component: 850 - total flux cleaned = 0.00740987 Jy ! Component: 900 - total flux cleaned = 0.00748333 Jy ! Component: 950 - total flux cleaned = 0.00762614 Jy ! Component: 1000 - total flux cleaned = 0.00776708 Jy ! Component: 1050 - total flux cleaned = 0.00790504 Jy ! Component: 1100 - total flux cleaned = 0.00817303 Jy ! Component: 1150 - total flux cleaned = 0.00817424 Jy ! Component: 1200 - total flux cleaned = 0.00843269 Jy ! Component: 1250 - total flux cleaned = 0.00862268 Jy ! Component: 1300 - total flux cleaned = 0.0089942 Jy ! Component: 1350 - total flux cleaned = 0.00911606 Jy ! Component: 1400 - total flux cleaned = 0.00929698 Jy ! Component: 1450 - total flux cleaned = 0.00953421 Jy ! Component: 1500 - total flux cleaned = 0.00988079 Jy ! Component: 1550 - total flux cleaned = 0.0102214 Jy ! Component: 1600 - total flux cleaned = 0.0102195 Jy ! Component: 1650 - total flux cleaned = 0.0104391 Jy ! Component: 1700 - total flux cleaned = 0.0106006 Jy ! Component: 1750 - total flux cleaned = 0.0106537 Jy ! Component: 1800 - total flux cleaned = 0.010812 Jy ! Component: 1850 - total flux cleaned = 0.0109156 Jy ! Component: 1900 - total flux cleaned = 0.0110179 Jy ! Component: 1950 - total flux cleaned = 0.0111188 Jy ! Component: 2000 - total flux cleaned = 0.0113662 Jy ! Component: 2050 - total flux cleaned = 0.0113664 Jy ! Component: 2100 - total flux cleaned = 0.0117023 Jy ! Component: 2150 - total flux cleaned = 0.0117963 Jy ! Component: 2200 - total flux cleaned = 0.011749 Jy ! Component: 2250 - total flux cleaned = 0.01175 Jy ! Component: 2300 - total flux cleaned = 0.0119326 Jy ! Component: 2350 - total flux cleaned = 0.0119783 Jy ! Component: 2400 - total flux cleaned = 0.0122872 Jy ! Component: 2450 - total flux cleaned = 0.012374 Jy ! Component: 2500 - total flux cleaned = 0.0125895 Jy ! Component: 2550 - total flux cleaned = 0.0128018 Jy ! Component: 2600 - total flux cleaned = 0.0129698 Jy ! Component: 2650 - total flux cleaned = 0.0133013 Jy ! Component: 2700 - total flux cleaned = 0.01326 Jy ! Component: 2750 - total flux cleaned = 0.0135435 Jy ! Component: 2800 - total flux cleaned = 0.0135431 Jy ! Component: 2850 - total flux cleaned = 0.0138973 Jy ! Component: 2900 - total flux cleaned = 0.0140513 Jy ! Component: 2950 - total flux cleaned = 0.0140895 Jy ! Component: 3000 - total flux cleaned = 0.0142792 Jy ! Component: 3050 - total flux cleaned = 0.0143544 Jy ! Component: 3100 - total flux cleaned = 0.0145399 Jy ! Component: 3150 - total flux cleaned = 0.0146866 Jy ! Component: 3200 - total flux cleaned = 0.0148675 Jy ! Component: 3250 - total flux cleaned = 0.0149393 Jy ! Component: 3300 - total flux cleaned = 0.0152222 Jy ! Component: 3350 - total flux cleaned = 0.0154662 Jy ! Component: 3400 - total flux cleaned = 0.0155008 Jy ! Component: 3450 - total flux cleaned = 0.0158076 Jy ! Component: 3500 - total flux cleaned = 0.0156724 Jy ! Component: 3550 - total flux cleaned = 0.01594 Jy ! Component: 3600 - total flux cleaned = 0.0161048 Jy ! Component: 3650 - total flux cleaned = 0.0161703 Jy ! Component: 3700 - total flux cleaned = 0.0162672 Jy ! Component: 3750 - total flux cleaned = 0.0163955 Jy ! Component: 3800 - total flux cleaned = 0.0166168 Jy ! Component: 3850 - total flux cleaned = 0.0165852 Jy ! Component: 3900 - total flux cleaned = 0.0166779 Jy ! Component: 3950 - total flux cleaned = 0.016862 Jy ! Component: 4000 - total flux cleaned = 0.0170739 Jy ! Component: 4050 - total flux cleaned = 0.0172243 Jy ! Total flux subtracted in 4096 components = 0.0172537 Jy ! Clean residual min=-0.001477 max=0.001514 Jy/beam ! Clean residual mean=0.000001 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 3.01956 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 481 components and 3.01956 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0555+3948_X_k_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7794 x 1.606 at -1.873 degrees (North through East) ! Clean map min=-0.0098178 max=1.8786 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0555+3948_X_k_map.fits wmodel /image_prod/ug002_uva//J0555+3948_X_k_map.mod ! Writing 481 model components to file: /image_prod/ug002_uva//J0555+3948_X_k_map.mod wobs /image_prod/ug002_uva//J0555+3948_X_k_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0555+3948_X_k_uvs.fits wwins /image_prod/ug002_uva//J0555+3948_X_k_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0555+3948_X_k_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.87857 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000512461 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0818378 0.0818378 0.163676 0.327351 0.654703 1.30941 2.61881 5.23762 10.4752 20.9505 41.901 83.8019 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.878 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3665.78 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0555+3948_X_k_dfm.log closed on Wed Mar 4 21:05:08 2020