! Started logfile: /image_prod/ug002_uva//J0555+3948_X_j_dfm.log on Wed Mar 4 21:04:58 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0555+3948_X_j_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0555+3948_X_j_uva.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! AN table 2: 6 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.861111 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6696 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0555+3948_X_j] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=2.422620Jy sigma=7.912364 ! Fit after self-cal, rms=1.423782Jy sigma=4.268662 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6313 mas, bmaj=1.203 mas, bpa=-1.131 degrees ! Estimated noise=2.95625 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07888 Jy ! Component: 100 - total flux cleaned = 1.51565 Jy ! Total flux subtracted in 100 components = 1.51565 Jy ! Clean residual min=-0.147250 max=0.303228 Jy/beam ! Clean residual mean=0.000098 rms=0.033339 Jy/beam ! Combined flux in latest and established models = 1.51565 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.51565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.101781Jy sigma=3.888202 ! Fit after self-cal, rms=1.097893Jy sigma=3.878136 ! Inverting map ! Added new window around map position (-0.8, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.310002 Jy ! Component: 100 - total flux cleaned = 0.489467 Jy ! Total flux subtracted in 100 components = 0.489467 Jy ! Clean residual min=-0.113190 max=0.197460 Jy/beam ! Clean residual mean=0.000046 rms=0.030968 Jy/beam ! Combined flux in latest and established models = 2.00511 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 2.00511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.858272Jy sigma=3.895476 ! Fit after self-cal, rms=0.854330Jy sigma=3.885669 ! Inverting map ! Added new window around map position (10, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181243 Jy ! Component: 100 - total flux cleaned = 0.295264 Jy ! Total flux subtracted in 100 components = 0.295264 Jy ! Clean residual min=-0.108237 max=0.184426 Jy/beam ! Clean residual mean=0.000034 rms=0.028290 Jy/beam ! Combined flux in latest and established models = 2.30038 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 2.30038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.777612Jy sigma=3.717813 ! Fit after self-cal, rms=0.768673Jy sigma=3.699694 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7526 mas, bmaj=1.427 mas, bpa=-2.226 degrees ! Estimated noise=2.24016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159583 Jy ! Component: 100 - total flux cleaned = 0.250708 Jy ! Component: 150 - total flux cleaned = 0.288133 Jy ! Component: 200 - total flux cleaned = 0.309649 Jy ! Total flux subtracted in 200 components = 0.309649 Jy ! Clean residual min=-0.142151 max=0.208834 Jy/beam ! Clean residual mean=-0.000112 rms=0.041281 Jy/beam ! Combined flux in latest and established models = 2.61003 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 2.61003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.710905Jy sigma=3.604164 ! Fit after self-cal, rms=0.702764Jy sigma=3.589825 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7526 x 1.427 at -2.226 degrees (North through East) ! Clean map min=-0.1314 max=1.4916 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.92 HN 0.93 KP 0.90 ! LA 1.97 MK 0.96 NL 3.01 OV 0.83 ! SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.78 FD 0.79 HN 0.90 KP 0.94 ! LA 0.90 MK 1.20 OV 0.84 PT 0.78 ! SC 0.90 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.92 HN 0.91 KP 0.93 ! LA 2.01 MK 0.94 NL 2.17 OV 0.81 ! SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.80 FD 0.82 HN 0.89 KP 0.95 ! LA 0.89 MK 1.17 OV 0.84 PT 0.80 ! SC 0.89 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.90 HN 0.92 KP 0.91 ! LA 2.07 MK 1.01 NL 2.34 OV 0.82 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 FD 0.75 HN 0.93 KP 0.95 ! LA 0.88 MK 1.18 OV 0.84 PT 0.76 ! SC 0.91 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.91 HN 0.93 KP 0.96 ! LA 1.84 MK 0.95 NL 2.70 OV 0.80 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.79 HN 0.93 KP 0.93 ! LA 0.89 MK 1.11 OV 0.83 PT 0.72 ! SC 0.94 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.97 HN 0.89 KP 1.00 ! LA 1.80 MK 0.98 NL 2.00 OV 0.81 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.82 FD 0.78 HN 0.92 KP 0.94 ! LA 0.88 MK 1.13 OV 0.84 PT 0.77 ! SC 0.94 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.96 HN 0.90 KP 0.95 ! LA 1.89 MK 0.97 NL 2.17 OV 0.86 ! SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.81 FD 0.78 HN 0.97 KP 0.96 ! LA 0.88 MK 1.12 OV 0.83 PT 0.79 ! SC 0.94 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.96 HN 0.92 KP 0.90 ! LA 1.87 MK 0.97 NL 1.93 OV 0.84 ! SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.78 HN 0.93 KP 0.95 ! LA 0.86 MK 1.15 OV 0.84 PT 0.76 ! SC 0.95 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.93 HN 0.93 KP 0.89 ! LA 1.77 MK 1.06 NL 2.31 OV 0.80 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.79 HN 0.95 KP 0.96 ! LA 0.89 MK 1.14 OV 0.84 PT 0.74 ! SC 0.95 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.90 HN 0.95 KP 0.93 ! LA 1.94 MK 1.02 NL 2.66 OV 0.86 ! SC 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.80 HN 0.93 KP 0.97 ! LA 0.87 MK 1.12 OV 0.87 PT 0.79 ! SC 0.98 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.94 HN 0.91 KP 0.95 ! LA 2.00 MK 0.99 NL 2.34 OV 0.81 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.82 HN 0.93 KP 0.92 ! LA 0.88 MK 1.16 OV 0.87 PT 0.77 ! SC 1.00 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.88 HN 0.93 KP 0.95 ! LA 2.32 MK 1.02 NL 2.25 OV 0.83 ! SC 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.78 HN 0.96 KP 0.96 ! LA 0.86 MK 1.13 OV 0.85 PT 0.77 ! SC 0.99 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.88 HN 0.92 KP 0.99 ! LA 2.20 MK 1.01 NL 2.24 OV 0.83 ! SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.79 HN 0.95 KP 0.96 ! LA 0.86 MK 1.11 OV 0.86 PT 0.76 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.702764Jy sigma=3.589825 ! Fit after self-cal, rms=1.300552Jy sigma=2.089241 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7434 mas, bmaj=1.381 mas, bpa=-1.343 degrees ! Estimated noise=2.40644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111196 Jy ! Component: 100 - total flux cleaned = 0.14124 Jy ! Component: 150 - total flux cleaned = 0.165412 Jy ! Component: 200 - total flux cleaned = 0.183635 Jy ! Total flux subtracted in 200 components = 0.183635 Jy ! Clean residual min=-0.115867 max=0.088889 Jy/beam ! Clean residual mean=0.000337 rms=0.022532 Jy/beam ! Combined flux in latest and established models = 2.79366 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 2.79366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.254712Jy sigma=2.110977 ! Fit after self-cal, rms=1.254500Jy sigma=2.105660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.254500Jy sigma=2.105660 ! Fit after self-cal, rms=1.783866Jy sigma=1.371222 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7462 mas, bmaj=1.378 mas, bpa=-2.256 degrees ! Estimated noise=2.47849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00860883 Jy ! Component: 100 - total flux cleaned = -0.00707087 Jy ! Component: 150 - total flux cleaned = -0.00572581 Jy ! Component: 200 - total flux cleaned = -0.00345031 Jy ! Total flux subtracted in 200 components = -0.00345031 Jy ! Clean residual min=-0.051671 max=0.039904 Jy/beam ! Clean residual mean=0.000087 rms=0.010147 Jy/beam ! Combined flux in latest and established models = 2.79021 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 73 components and 2.79021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.771587Jy sigma=1.333246 ! Fit after self-cal, rms=1.771039Jy sigma=1.323365 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0191337 Jy ! Component: 100 - total flux cleaned = -0.0213237 Jy ! Component: 150 - total flux cleaned = -0.019704 Jy ! Component: 200 - total flux cleaned = -0.0162371 Jy ! Total flux subtracted in 200 components = -0.0162371 Jy ! Clean residual min=-0.047294 max=0.038253 Jy/beam ! Clean residual mean=0.000079 rms=0.009648 Jy/beam ! Combined flux in latest and established models = 2.77397 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 78 components and 2.77397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.767279Jy sigma=1.311773 ! Fit after self-cal, rms=1.767167Jy sigma=1.308620 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.767167Jy sigma=1.308620 ! Fit after self-cal, rms=1.826373Jy sigma=1.288017 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7414 mas, bmaj=1.373 mas, bpa=-2.676 degrees ! Estimated noise=2.51904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193091 Jy ! Component: 100 - total flux cleaned = 0.0274883 Jy ! Component: 150 - total flux cleaned = 0.0306432 Jy ! Component: 200 - total flux cleaned = 0.0340034 Jy ! Total flux subtracted in 200 components = 0.0340034 Jy ! Clean residual min=-0.042661 max=0.035505 Jy/beam ! Clean residual mean=0.000067 rms=0.008987 Jy/beam ! Combined flux in latest and established models = 2.80798 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 81 components and 2.80798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.816398Jy sigma=1.279078 ! Fit after self-cal, rms=1.816246Jy sigma=1.275946 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0104017 Jy ! Component: 100 - total flux cleaned = -0.0105582 Jy ! Component: 150 - total flux cleaned = -0.00815564 Jy ! Component: 200 - total flux cleaned = -0.00558741 Jy ! Total flux subtracted in 200 components = -0.00558741 Jy ! Clean residual min=-0.042381 max=0.033771 Jy/beam ! Clean residual mean=0.000062 rms=0.008807 Jy/beam ! Combined flux in latest and established models = 2.80239 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 84 components and 2.80239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.813663Jy sigma=1.272835 ! Fit after self-cal, rms=1.813630Jy sigma=1.271768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.813630Jy sigma=1.271768 ! Fit after self-cal, rms=1.876927Jy sigma=1.258383 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.862 mas, bmaj=2.352 mas, bpa=-1.891 degrees ! Estimated noise=4.43659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469803 Jy ! Component: 100 - total flux cleaned = 0.0496969 Jy ! Component: 150 - total flux cleaned = 0.0497319 Jy ! Component: 200 - total flux cleaned = 0.0484544 Jy ! Total flux subtracted in 200 components = 0.0484544 Jy ! Clean residual min=-0.065953 max=0.054022 Jy/beam ! Clean residual mean=0.000170 rms=0.015370 Jy/beam ! Combined flux in latest and established models = 2.85084 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 2.85084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.865583Jy sigma=1.276629 ! Fit after self-cal, rms=1.865635Jy sigma=1.269705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00416365 Jy ! Component: 100 - total flux cleaned = -0.00772041 Jy ! Component: 150 - total flux cleaned = -0.00983691 Jy ! Component: 200 - total flux cleaned = -0.0113298 Jy ! Total flux subtracted in 200 components = -0.0113298 Jy ! Clean residual min=-0.063962 max=0.053430 Jy/beam ! Clean residual mean=0.000161 rms=0.015219 Jy/beam ! Combined flux in latest and established models = 2.83951 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 2.83951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.864387Jy sigma=1.276923 ! Fit after self-cal, rms=1.864470Jy sigma=1.274926 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7371 mas, bmaj=1.368 mas, bpa=-3.079 degrees ! Estimated noise=2.56102 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7371 x 1.368 at -3.079 degrees (North through East) ! Clean map min=-0.040185 max=1.713 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.864470Jy sigma=1.274926 ! Fit after self-cal, rms=4.223825Jy sigma=0.394880 ! Inverting map and beam ! Estimated beam: bmin=0.7383 mas, bmaj=1.371 mas, bpa=-3.176 degrees ! Estimated noise=2.56906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00952273 Jy ! Component: 100 - total flux cleaned = 0.0127808 Jy ! Component: 150 - total flux cleaned = 0.0133694 Jy ! Component: 200 - total flux cleaned = 0.0133771 Jy ! Total flux subtracted in 200 components = 0.0133771 Jy ! Clean residual min=-0.018365 max=0.017441 Jy/beam ! Clean residual mean=0.000032 rms=0.003394 Jy/beam ! Combined flux in latest and established models = 2.85289 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 99 components and 2.85289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=4.223362Jy sigma=0.344311 ! Fit after self-cal, rms=4.226199Jy sigma=0.338646 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00365494 Jy ! Component: 100 - total flux cleaned = -0.00365784 Jy ! Component: 150 - total flux cleaned = -0.00364971 Jy ! Component: 200 - total flux cleaned = -0.00488327 Jy ! Total flux subtracted in 200 components = -0.00488327 Jy ! Clean residual min=-0.016194 max=0.015735 Jy/beam ! Clean residual mean=0.000030 rms=0.003130 Jy/beam ! Combined flux in latest and established models = 2.84801 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 2.84801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=4.226093Jy sigma=0.325531 ! Fit after self-cal, rms=4.226361Jy sigma=0.324396 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=4.226361Jy sigma=0.324396 ! Fit after self-cal, rms=3.008849Jy sigma=0.310784 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6205 mas, bmaj=1.16 mas, bpa=-1.895 degrees ! Estimated noise=3.26288 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.20845 Jy ! Component: 100 - total flux cleaned = 1.74714 Jy ! Component: 150 - total flux cleaned = 2.06512 Jy ! Component: 200 - total flux cleaned = 2.26574 Jy ! Total flux subtracted in 200 components = 2.26574 Jy ! Clean residual min=-0.046118 max=0.110607 Jy/beam ! Clean residual mean=0.000051 rms=0.010422 Jy/beam ! Combined flux in latest and established models = 2.26574 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 2.26574 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7347 mas, bmaj=1.368 mas, bpa=-2.969 degrees ! Estimated noise=2.55453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203014 Jy ! Component: 100 - total flux cleaned = 0.322579 Jy ! Component: 150 - total flux cleaned = 0.399193 Jy ! Component: 200 - total flux cleaned = 0.450195 Jy ! Total flux subtracted in 200 components = 0.450195 Jy ! Clean residual min=-0.017900 max=0.029360 Jy/beam ! Clean residual mean=0.000007 rms=0.004040 Jy/beam ! Combined flux in latest and established models = 2.71594 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 2.71594 Jy ! Inverting map ! Added new window around map position (0.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360665 Jy ! Component: 100 - total flux cleaned = 0.0622369 Jy ! Component: 150 - total flux cleaned = 0.0818149 Jy ! Component: 200 - total flux cleaned = 0.090467 Jy ! Total flux subtracted in 200 components = 0.090467 Jy ! Clean residual min=-0.012691 max=0.013653 Jy/beam ! Clean residual mean=0.000015 rms=0.002772 Jy/beam ! Combined flux in latest and established models = 2.8064 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 45 components and 2.8064 Jy ! Inverting map ! Added new window around map position (11, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00888945 Jy ! Component: 100 - total flux cleaned = 0.0129699 Jy ! Component: 150 - total flux cleaned = 0.0166244 Jy ! Component: 200 - total flux cleaned = 0.0192092 Jy ! Total flux subtracted in 200 components = 0.0192092 Jy ! Clean residual min=-0.011824 max=0.012105 Jy/beam ! Clean residual mean=0.000017 rms=0.002514 Jy/beam ! Combined flux in latest and established models = 2.82561 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 58 components and 2.82561 Jy ! Inverting map ! Added new window around map position (13.6, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432646 Jy ! Component: 100 - total flux cleaned = 0.00608592 Jy ! Component: 150 - total flux cleaned = 0.00703651 Jy ! Component: 200 - total flux cleaned = 0.00733836 Jy ! Total flux subtracted in 200 components = 0.00733836 Jy ! Clean residual min=-0.011229 max=0.010597 Jy/beam ! Clean residual mean=0.000017 rms=0.002337 Jy/beam ! Combined flux in latest and established models = 2.83295 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 73 components and 2.83295 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.839 mas, bmaj=2.351 mas, bpa=-0.821 degrees ! Estimated noise=4.47751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789652 Jy ! Component: 100 - total flux cleaned = 0.000814967 Jy ! Component: 150 - total flux cleaned = 0.00111017 Jy ! Component: 200 - total flux cleaned = 0.000609032 Jy ! Total flux subtracted in 200 components = 0.000609032 Jy ! Clean residual min=-0.016138 max=0.014623 Jy/beam ! Clean residual mean=0.000056 rms=0.003760 Jy/beam ! Combined flux in latest and established models = 2.83356 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210127 Jy ! Component: 100 - total flux cleaned = -0.000398725 Jy ! Component: 150 - total flux cleaned = -0.00092275 Jy ! Component: 200 - total flux cleaned = -0.0010766 Jy ! Total flux subtracted in 200 components = -0.0010766 Jy ! Clean residual min=-0.015769 max=0.014055 Jy/beam ! Clean residual mean=0.000055 rms=0.003660 Jy/beam ! Combined flux in latest and established models = 2.83248 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 103 components and 2.83248 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7347 mas, bmaj=1.368 mas, bpa=-2.969 degrees ! Estimated noise=2.55453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196602 Jy ! Component: 100 - total flux cleaned = 0.0019651 Jy ! Component: 150 - total flux cleaned = 0.00219561 Jy ! Component: 200 - total flux cleaned = 0.00241658 Jy ! Total flux subtracted in 200 components = 0.00241658 Jy ! Clean residual min=-0.010876 max=0.010471 Jy/beam ! Clean residual mean=0.000016 rms=0.002188 Jy/beam ! Combined flux in latest and established models = 2.8349 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 113 components and 2.8349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=3.008048Jy sigma=0.275862 ! Fit after self-cal, rms=3.008060Jy sigma=0.270141 wmodel J0555+3948_X_j_map.mod ! Writing 113 model components to file: J0555+3948_X_j_map.mod wobs J0555+3948_X_j_uvs.fits ! Writing UV FITS file: J0555+3948_X_j_uvs.fits wwins J0555+3948_X_j_map.win ! wwins: Wrote 6 windows to J0555+3948_X_j_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120445 Jy ! Component: 100 - total flux cleaned = -0.00103672 Jy ! Component: 150 - total flux cleaned = -0.000712539 Jy ! Component: 200 - total flux cleaned = -0.000398851 Jy ! Component: 250 - total flux cleaned = 0.000357592 Jy ! Component: 300 - total flux cleaned = 0.00123996 Jy ! Component: 350 - total flux cleaned = 0.00152682 Jy ! Component: 400 - total flux cleaned = 0.00138746 Jy ! Component: 450 - total flux cleaned = 0.00193354 Jy ! Component: 500 - total flux cleaned = 0.00206627 Jy ! Component: 550 - total flux cleaned = 0.00219987 Jy ! Component: 600 - total flux cleaned = 0.00270999 Jy ! Component: 650 - total flux cleaned = 0.00283382 Jy ! Component: 700 - total flux cleaned = 0.00332713 Jy ! Component: 750 - total flux cleaned = 0.00344575 Jy ! Component: 800 - total flux cleaned = 0.00392089 Jy ! Component: 850 - total flux cleaned = 0.00438899 Jy ! Component: 900 - total flux cleaned = 0.00496153 Jy ! Component: 950 - total flux cleaned = 0.00507533 Jy ! Component: 1000 - total flux cleaned = 0.00562797 Jy ! Component: 1050 - total flux cleaned = 0.00551707 Jy ! Component: 1100 - total flux cleaned = 0.00573122 Jy ! Component: 1150 - total flux cleaned = 0.00573146 Jy ! Component: 1200 - total flux cleaned = 0.00583387 Jy ! Component: 1250 - total flux cleaned = 0.00603963 Jy ! Component: 1300 - total flux cleaned = 0.00603878 Jy ! Component: 1350 - total flux cleaned = 0.00613727 Jy ! Component: 1400 - total flux cleaned = 0.00603736 Jy ! Component: 1450 - total flux cleaned = 0.00594129 Jy ! Component: 1500 - total flux cleaned = 0.00622927 Jy ! Component: 1550 - total flux cleaned = 0.00651054 Jy ! Component: 1600 - total flux cleaned = 0.00669368 Jy ! Component: 1650 - total flux cleaned = 0.00651115 Jy ! Component: 1700 - total flux cleaned = 0.00678256 Jy ! Component: 1750 - total flux cleaned = 0.00669442 Jy ! Component: 1800 - total flux cleaned = 0.00695749 Jy ! Component: 1850 - total flux cleaned = 0.00704485 Jy ! Component: 1900 - total flux cleaned = 0.00738582 Jy ! Component: 1950 - total flux cleaned = 0.00721804 Jy ! Component: 2000 - total flux cleaned = 0.00746703 Jy ! Component: 2050 - total flux cleaned = 0.00763026 Jy ! Component: 2100 - total flux cleaned = 0.00770997 Jy ! Component: 2150 - total flux cleaned = 0.00778901 Jy ! Component: 2200 - total flux cleaned = 0.00763094 Jy ! Component: 2250 - total flux cleaned = 0.00778705 Jy ! Component: 2300 - total flux cleaned = 0.00770838 Jy ! Component: 2350 - total flux cleaned = 0.0075556 Jy ! Component: 2400 - total flux cleaned = 0.00763209 Jy ! Component: 2450 - total flux cleaned = 0.00785761 Jy ! Component: 2500 - total flux cleaned = 0.00748778 Jy ! Component: 2550 - total flux cleaned = 0.00748817 Jy ! Component: 2600 - total flux cleaned = 0.0077781 Jy ! Component: 2650 - total flux cleaned = 0.00727744 Jy ! Component: 2700 - total flux cleaned = 0.00727774 Jy ! Component: 2750 - total flux cleaned = 0.0071365 Jy ! Component: 2800 - total flux cleaned = 0.00713661 Jy ! Component: 2850 - total flux cleaned = 0.00692973 Jy ! Component: 2900 - total flux cleaned = 0.00686128 Jy ! Component: 2950 - total flux cleaned = 0.00665789 Jy ! Component: 3000 - total flux cleaned = 0.00645759 Jy ! Component: 3050 - total flux cleaned = 0.00672277 Jy ! Component: 3100 - total flux cleaned = 0.00672175 Jy ! Component: 3150 - total flux cleaned = 0.00659146 Jy ! Component: 3200 - total flux cleaned = 0.00652649 Jy ! Component: 3250 - total flux cleaned = 0.00633433 Jy ! Component: 3300 - total flux cleaned = 0.00645997 Jy ! Component: 3350 - total flux cleaned = 0.00621014 Jy ! Component: 3400 - total flux cleaned = 0.00620964 Jy ! Component: 3450 - total flux cleaned = 0.00633311 Jy ! Component: 3500 - total flux cleaned = 0.00621219 Jy ! Component: 3550 - total flux cleaned = 0.00615128 Jy ! Component: 3600 - total flux cleaned = 0.00579291 Jy ! Component: 3650 - total flux cleaned = 0.00561538 Jy ! Component: 3700 - total flux cleaned = 0.00567401 Jy ! Component: 3750 - total flux cleaned = 0.0055573 Jy ! Component: 3800 - total flux cleaned = 0.00555729 Jy ! Component: 3850 - total flux cleaned = 0.00527114 Jy ! Component: 3900 - total flux cleaned = 0.00532662 Jy ! Component: 3950 - total flux cleaned = 0.00493289 Jy ! Component: 4000 - total flux cleaned = 0.00482191 Jy ! Component: 4050 - total flux cleaned = 0.0048219 Jy ! Total flux subtracted in 4096 components = 0.00460291 Jy ! Clean residual min=-0.002729 max=0.002730 Jy/beam ! Clean residual mean=0.000005 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 2.8395 Jy keep ! Adding 335 model components to the UV plane model. ! The established model now contains 447 components and 2.8395 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0555+3948_X_j_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7347 x 1.368 at -2.969 degrees (North through East) ! Clean map min=-0.0076921 max=1.7359 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0555+3948_X_j_map.fits wmodel /image_prod/ug002_uva//J0555+3948_X_j_map.mod ! Writing 447 model components to file: /image_prod/ug002_uva//J0555+3948_X_j_map.mod wobs /image_prod/ug002_uva//J0555+3948_X_j_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0555+3948_X_j_uvs.fits wwins /image_prod/ug002_uva//J0555+3948_X_j_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0555+3948_X_j_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.73588 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000921932 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.159331 0.159331 0.318661 0.637323 1.27465 2.54929 5.09858 10.1972 20.3943 40.7887 81.5773 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.735 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1882.88 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0555+3948_X_j_dfm.log closed on Wed Mar 4 21:05:02 2020