! Started logfile: /image_prod/ug002_uva//J0555+3948_X_i_dfm.log on Wed Mar  4 21:04:53 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0555+3948_X_i_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0555+3948_X_i_uva.fits
! AN table 1: 24 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.75 visibilities/baseline/integration-bin.
! Found source: J0555+3948
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7776 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0555+3948_X_i]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.728870Jy  sigma=7.959415
! Fit after  self-cal, rms=1.652467Jy  sigma=4.322839
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6554 mas, bmaj=1.239 mas, bpa=6.493 degrees
! Estimated noise=3.22397 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.37333 Jy
! Component: 100  -  total flux cleaned = 1.94833 Jy
! Total flux subtracted in 100 components = 1.94833 Jy
! Clean residual min=-0.110142 max=0.350096 Jy/beam
! Clean residual mean=0.000147 rms=0.024617 Jy/beam
! Combined flux in latest and established models = 1.94833 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.94833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.936222Jy  sigma=2.422820
! Fit after  self-cal, rms=0.930337Jy  sigma=2.401986
! Inverting map 
! Added new window around map position (-0.6, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.390143 Jy
! Component: 100  -  total flux cleaned = 0.632896 Jy
! Total flux subtracted in 100 components = 0.632896 Jy
! Clean residual min=-0.055711 max=0.131221 Jy/beam
! Clean residual mean=0.000081 rms=0.012407 Jy/beam
! Combined flux in latest and established models = 2.58123 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 2.58123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.506932Jy  sigma=1.270129
! Fit after  self-cal, rms=0.500383Jy  sigma=1.246439
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167938 Jy
! Component: 100  -  total flux cleaned = 0.282694 Jy
! Total flux subtracted in 100 components = 0.282694 Jy
! Clean residual min=-0.037810 max=0.064325 Jy/beam
! Clean residual mean=0.000052 rms=0.008126 Jy/beam
! Combined flux in latest and established models = 2.86392 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 20 components and 2.86392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.337676Jy  sigma=0.843048
! Fit after  self-cal, rms=0.336683Jy  sigma=0.839592
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0851664 Jy
! Component: 100  -  total flux cleaned = 0.149217 Jy
! Total flux subtracted in 100 components = 0.149217 Jy
! Clean residual min=-0.031459 max=0.037124 Jy/beam
! Clean residual mean=0.000036 rms=0.006676 Jy/beam
! Combined flux in latest and established models = 3.01314 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 3.01314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.269043Jy  sigma=0.686233
! Fit after  self-cal, rms=0.268606Jy  sigma=0.684755
! Inverting map 
! Added new window around map position (-1.2, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0511167 Jy
! Component: 100  -  total flux cleaned = 0.0909567 Jy
! Total flux subtracted in 100 components = 0.0909567 Jy
! Clean residual min=-0.031202 max=0.030155 Jy/beam
! Clean residual mean=0.000027 rms=0.006048 Jy/beam
! Combined flux in latest and established models = 3.10409 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 39 components and 3.10409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.237845Jy  sigma=0.619750
! Fit after  self-cal, rms=0.237546Jy  sigma=0.618651
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7872 mas, bmaj=1.464 mas, bpa=6.465 degrees
! Estimated noise=2.50678 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0571463 Jy
! Component: 100  -  total flux cleaned = 0.0943632 Jy
! Component: 150  -  total flux cleaned = 0.119952 Jy
! Component: 200  -  total flux cleaned = 0.137862 Jy
! Total flux subtracted in 200 components = 0.137862 Jy
! Clean residual min=-0.043701 max=0.036176 Jy/beam
! Clean residual mean=0.000036 rms=0.008042 Jy/beam
! Combined flux in latest and established models = 3.24196 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 63 components and 3.24196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.209994Jy  sigma=0.573292
! Fit after  self-cal, rms=0.209521Jy  sigma=0.571578
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7872 x 1.464 at 6.465 degrees (North through East)
! Clean map  min=-0.041641  max=2.0183 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.00     KP        1.06     
!   LA        1.05     MK        1.02     OV        0.92     PT        0.90     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.03     KP        1.04     
!   LA        1.05     MK        1.01     OV        0.92     PT        0.90     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.00     KP        1.04     
!   LA        1.07     MK        1.01     OV        0.92     PT        0.91     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.98     KP        1.05     
!   LA        1.05     MK        1.04     OV        0.93     PT        0.91     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.99     KP        1.04     
!   LA        1.06     MK        1.03     OV        0.94     PT        0.91     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.00     KP        1.05     
!   LA        1.05     MK        1.05     OV        0.92     PT        0.91     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.99     KP        1.04     
!   LA        1.08     MK        1.05     OV        0.92     PT        0.91     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.99     KP        1.06     
!   LA        1.06     MK        1.06     OV        0.93     PT        0.90     
!   SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.01     KP        1.04     
!   LA        1.05     MK        1.05     OV        0.92     PT        0.91     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.01     KP        1.06     
!   LA        1.05     MK        1.06     OV        0.92     PT        0.91     
!   SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.00     KP        1.06     
!   LA        1.04     MK        1.10     OV        0.94     PT        0.93     
!   SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.02     KP        1.07     
!   LA        1.05     MK        1.08     OV        0.93     PT        0.90     
!   SC        1.04     
! 
! 
! Fit before self-cal, rms=0.209521Jy  sigma=0.571578
! Fit after  self-cal, rms=0.085690Jy  sigma=0.273342
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7931 mas, bmaj=1.473 mas, bpa=6.804 degrees
! Estimated noise=2.51734 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000945625 Jy
! Component: 100  -  total flux cleaned = -0.000219642 Jy
! Component: 150  -  total flux cleaned = -0.00089242 Jy
! Component: 200  -  total flux cleaned = -0.00135441 Jy
! Total flux subtracted in 200 components = -0.00135441 Jy
! Clean residual min=-0.012133 max=0.010594 Jy/beam
! Clean residual mean=0.000022 rms=0.002674 Jy/beam
! Combined flux in latest and established models = 3.2406 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 3.2406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084962Jy  sigma=0.270353
! Fit after  self-cal, rms=0.084884Jy  sigma=0.270124
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084884Jy  sigma=0.270124
! Fit after  self-cal, rms=0.063279Jy  sigma=0.219949
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7916 mas, bmaj=1.472 mas, bpa=6.574 degrees
! Estimated noise=2.51252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00228016 Jy
! Component: 100  -  total flux cleaned = -0.00223059 Jy
! Component: 150  -  total flux cleaned = -0.00233903 Jy
! Component: 200  -  total flux cleaned = -0.00225233 Jy
! Total flux subtracted in 200 components = -0.00225233 Jy
! Clean residual min=-0.005266 max=0.004927 Jy/beam
! Clean residual mean=-0.000000 rms=0.000972 Jy/beam
! Combined flux in latest and established models = 3.23835 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 79 components and 3.23835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062727Jy  sigma=0.217293
! Fit after  self-cal, rms=0.062596Jy  sigma=0.217004
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195195 Jy
! Component: 100  -  total flux cleaned = -0.000194872 Jy
! Component: 150  -  total flux cleaned = -0.000194851 Jy
! Component: 200  -  total flux cleaned = -0.00019488 Jy
! Total flux subtracted in 200 components = -0.00019488 Jy
! Clean residual min=-0.004710 max=0.004823 Jy/beam
! Clean residual mean=-0.000000 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 3.23815 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 81 components and 3.23815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062417Jy  sigma=0.216239
! Fit after  self-cal, rms=0.062385Jy  sigma=0.216137
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062385Jy  sigma=0.216137
! Fit after  self-cal, rms=0.061839Jy  sigma=0.214048
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7911 mas, bmaj=1.473 mas, bpa=6.601 degrees
! Estimated noise=2.51221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474249 Jy
! Component: 100  -  total flux cleaned = 0.000387522 Jy
! Component: 150  -  total flux cleaned = 0.000385603 Jy
! Component: 200  -  total flux cleaned = 0.00038476 Jy
! Total flux subtracted in 200 components = 0.00038476 Jy
! Clean residual min=-0.005023 max=0.004157 Jy/beam
! Clean residual mean=-0.000002 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 3.23854 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 81 components and 3.23854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061678Jy  sigma=0.213262
! Fit after  self-cal, rms=0.061656Jy  sigma=0.213180
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.57747e-05 Jy
! Component: 100  -  total flux cleaned = -3.82592e-05 Jy
! Component: 150  -  total flux cleaned = 2.22207e-05 Jy
! Component: 200  -  total flux cleaned = 7.99696e-05 Jy
! Total flux subtracted in 200 components = 7.99696e-05 Jy
! Clean residual min=-0.004827 max=0.004102 Jy/beam
! Clean residual mean=-0.000002 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 3.23862 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 82 components and 3.23862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061551Jy  sigma=0.212762
! Fit after  self-cal, rms=0.061550Jy  sigma=0.212728
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061550Jy  sigma=0.212728
! Fit after  self-cal, rms=0.061549Jy  sigma=0.212624
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.989 mas, bmaj=2.639 mas, bpa=8.148 degrees
! Estimated noise=4.32324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000556544 Jy
! Component: 100  -  total flux cleaned = -0.0004447 Jy
! Component: 150  -  total flux cleaned = -0.000356523 Jy
! Component: 200  -  total flux cleaned = -0.000390362 Jy
! Total flux subtracted in 200 components = -0.000390362 Jy
! Clean residual min=-0.004372 max=0.005080 Jy/beam
! Clean residual mean=-0.000005 rms=0.001242 Jy/beam
! Combined flux in latest and established models = 3.23823 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 82 components and 3.23823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061494Jy  sigma=0.212735
! Fit after  self-cal, rms=0.061492Jy  sigma=0.212624
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.35904e-05 Jy
! Component: 100  -  total flux cleaned = 2.45302e-05 Jy
! Component: 150  -  total flux cleaned = 2.62948e-05 Jy
! Component: 200  -  total flux cleaned = -3.96876e-06 Jy
! Total flux subtracted in 200 components = -3.96876e-06 Jy
! Clean residual min=-0.004366 max=0.005066 Jy/beam
! Clean residual mean=-0.000005 rms=0.001235 Jy/beam
! Combined flux in latest and established models = 3.23822 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 84 components and 3.23822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061485Jy  sigma=0.212904
! Fit after  self-cal, rms=0.061488Jy  sigma=0.212831
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7908 mas, bmaj=1.472 mas, bpa=6.604 degrees
! Estimated noise=2.51217 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7908 x 1.472 at 6.604 degrees (North through East)
! Clean map  min=-0.004169  max=2.0175 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061488Jy  sigma=0.212831
! Fit after  self-cal, rms=0.059406Jy  sigma=0.198416
! Inverting map and beam 
! Estimated beam: bmin=0.791 mas, bmaj=1.472 mas, bpa=6.529 degrees
! Estimated noise=2.51208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000518738 Jy
! Component: 100  -  total flux cleaned = 0.000942578 Jy
! Component: 150  -  total flux cleaned = 0.00100768 Jy
! Component: 200  -  total flux cleaned = 0.000953066 Jy
! Total flux subtracted in 200 components = 0.000953066 Jy
! Clean residual min=-0.004418 max=0.003944 Jy/beam
! Clean residual mean=-0.000001 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 3.23918 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 85 components and 3.23918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059304Jy  sigma=0.197775
! Fit after  self-cal, rms=0.059294Jy  sigma=0.197754
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000256314 Jy
! Component: 100  -  total flux cleaned = 0.000257692 Jy
! Component: 150  -  total flux cleaned = 0.000208557 Jy
! Component: 200  -  total flux cleaned = 0.000162251 Jy
! Total flux subtracted in 200 components = 0.000162251 Jy
! Clean residual min=-0.004378 max=0.003989 Jy/beam
! Clean residual mean=-0.000002 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 3.23934 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 85 components and 3.23934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059237Jy  sigma=0.197410
! Fit after  self-cal, rms=0.059239Jy  sigma=0.197398
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059239Jy  sigma=0.197398
! Fit after  self-cal, rms=0.059173Jy  sigma=0.197321
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6574 mas, bmaj=1.245 mas, bpa=6.669 degrees
! Estimated noise=3.24048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.38246 Jy
! Component: 100  -  total flux cleaned = 1.99625 Jy
! Component: 150  -  total flux cleaned = 2.35787 Jy
! Component: 200  -  total flux cleaned = 2.59019 Jy
! Total flux subtracted in 200 components = 2.59019 Jy
! Clean residual min=-0.042942 max=0.126330 Jy/beam
! Clean residual mean=0.000071 rms=0.010581 Jy/beam
! Combined flux in latest and established models = 2.59019 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 2.59019 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7908 mas, bmaj=1.472 mas, bpa=6.554 degrees
! Estimated noise=2.51193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.25154 Jy
! Component: 100  -  total flux cleaned = 0.395237 Jy
! Component: 150  -  total flux cleaned = 0.481914 Jy
! Component: 200  -  total flux cleaned = 0.537533 Jy
! Total flux subtracted in 200 components = 0.537533 Jy
! Clean residual min=-0.012096 max=0.032108 Jy/beam
! Clean residual mean=0.000014 rms=0.003343 Jy/beam
! Combined flux in latest and established models = 3.12772 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 41 components and 3.12772 Jy
! Inverting map 
! Added new window around map position (0.6, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0377506 Jy
! Component: 100  -  total flux cleaned = 0.0635911 Jy
! Component: 150  -  total flux cleaned = 0.0816243 Jy
! Component: 200  -  total flux cleaned = 0.0944802 Jy
! Total flux subtracted in 200 components = 0.0944802 Jy
! Clean residual min=-0.007774 max=0.008624 Jy/beam
! Clean residual mean=0.000001 rms=0.001416 Jy/beam
! Combined flux in latest and established models = 3.2222 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 57 components and 3.2222 Jy
! Inverting map 
! Added new window around map position (-2.2, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00728711 Jy
! Component: 100  -  total flux cleaned = 0.00956478 Jy
! Component: 150  -  total flux cleaned = 0.0109917 Jy
! Component: 200  -  total flux cleaned = 0.0115195 Jy
! Total flux subtracted in 200 components = 0.0115195 Jy
! Clean residual min=-0.006813 max=0.007080 Jy/beam
! Clean residual mean=0.000000 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 3.23372 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 71 components and 3.23372 Jy
! Inverting map 
! Added new window around map position (-2.2, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215441 Jy
! Component: 100  -  total flux cleaned = 0.00262762 Jy
! Component: 150  -  total flux cleaned = 0.00241277 Jy
! Component: 200  -  total flux cleaned = 0.00284731 Jy
! Total flux subtracted in 200 components = 0.00284731 Jy
! Clean residual min=-0.005710 max=0.005704 Jy/beam
! Clean residual mean=-0.000000 rms=0.001069 Jy/beam
! Combined flux in latest and established models = 3.23657 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 84 components and 3.23657 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.989 mas, bmaj=2.639 mas, bpa=8.095 degrees
! Estimated noise=4.32397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0036152 Jy
! Component: 100  -  total flux cleaned = 0.0032065 Jy
! Component: 150  -  total flux cleaned = 0.00261014 Jy
! Component: 200  -  total flux cleaned = 0.00216677 Jy
! Total flux subtracted in 200 components = 0.00216677 Jy
! Clean residual min=-0.004050 max=0.004723 Jy/beam
! Clean residual mean=-0.000004 rms=0.001204 Jy/beam
! Combined flux in latest and established models = 3.23874 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000463015 Jy
! Component: 100  -  total flux cleaned = -0.000819055 Jy
! Component: 150  -  total flux cleaned = -0.0011441 Jy
! Component: 200  -  total flux cleaned = -0.00148595 Jy
! Total flux subtracted in 200 components = -0.00148595 Jy
! Clean residual min=-0.004046 max=0.004630 Jy/beam
! Clean residual mean=-0.000004 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 3.23725 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 112 components and 3.23725 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7908 mas, bmaj=1.472 mas, bpa=6.554 degrees
! Estimated noise=2.51193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0028397 Jy
! Component: 100  -  total flux cleaned = -0.00245038 Jy
! Component: 150  -  total flux cleaned = -0.00245596 Jy
! Component: 200  -  total flux cleaned = -0.00228844 Jy
! Total flux subtracted in 200 components = -0.00228844 Jy
! Clean residual min=-0.005265 max=0.005310 Jy/beam
! Clean residual mean=-0.000001 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 3.23496 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 119 components and 3.23496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059777Jy  sigma=0.205866
! Fit after  self-cal, rms=0.059722Jy  sigma=0.205381
wmodel J0555+3948_X_i_map.mod
! Writing 119 model components to file: J0555+3948_X_i_map.mod
wobs   J0555+3948_X_i_uvs.fits
! Writing UV FITS file: J0555+3948_X_i_uvs.fits
wwins  J0555+3948_X_i_map.win
! wwins: Wrote 6 windows to J0555+3948_X_i_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00080235 Jy
! Component: 100  -  total flux cleaned = 0.00137681 Jy
! Component: 150  -  total flux cleaned = 0.00184131 Jy
! Component: 200  -  total flux cleaned = 0.00213875 Jy
! Component: 250  -  total flux cleaned = 0.00221225 Jy
! Component: 300  -  total flux cleaned = 0.0024218 Jy
! Component: 350  -  total flux cleaned = 0.00255726 Jy
! Component: 400  -  total flux cleaned = 0.00262321 Jy
! Component: 450  -  total flux cleaned = 0.00281725 Jy
! Component: 500  -  total flux cleaned = 0.00269111 Jy
! Component: 550  -  total flux cleaned = 0.00269281 Jy
! Component: 600  -  total flux cleaned = 0.00281457 Jy
! Component: 650  -  total flux cleaned = 0.00287328 Jy
! Component: 700  -  total flux cleaned = 0.00298941 Jy
! Component: 750  -  total flux cleaned = 0.00310411 Jy
! Component: 800  -  total flux cleaned = 0.0031051 Jy
! Component: 850  -  total flux cleaned = 0.00332727 Jy
! Component: 900  -  total flux cleaned = 0.00332574 Jy
! Component: 950  -  total flux cleaned = 0.00343343 Jy
! Component: 1000  -  total flux cleaned = 0.00348746 Jy
! Component: 1050  -  total flux cleaned = 0.00348745 Jy
! Component: 1100  -  total flux cleaned = 0.00359065 Jy
! Component: 1150  -  total flux cleaned = 0.00353953 Jy
! Component: 1200  -  total flux cleaned = 0.00364006 Jy
! Component: 1250  -  total flux cleaned = 0.00373894 Jy
! Component: 1300  -  total flux cleaned = 0.00378717 Jy
! Component: 1350  -  total flux cleaned = 0.00378723 Jy
! Component: 1400  -  total flux cleaned = 0.00359639 Jy
! Component: 1450  -  total flux cleaned = 0.00359614 Jy
! Component: 1500  -  total flux cleaned = 0.00359592 Jy
! Component: 1550  -  total flux cleaned = 0.00355058 Jy
! Component: 1600  -  total flux cleaned = 0.00341442 Jy
! Component: 1650  -  total flux cleaned = 0.00350361 Jy
! Component: 1700  -  total flux cleaned = 0.00341559 Jy
! Component: 1750  -  total flux cleaned = 0.00345829 Jy
! Component: 1800  -  total flux cleaned = 0.00341544 Jy
! Component: 1850  -  total flux cleaned = 0.00350044 Jy
! Component: 1900  -  total flux cleaned = 0.00349982 Jy
! Component: 1950  -  total flux cleaned = 0.00354089 Jy
! Component: 2000  -  total flux cleaned = 0.00345894 Jy
! Component: 2050  -  total flux cleaned = 0.00362202 Jy
! Component: 2100  -  total flux cleaned = 0.00350112 Jy
! Component: 2150  -  total flux cleaned = 0.00346201 Jy
! Component: 2200  -  total flux cleaned = 0.00358012 Jy
! Component: 2250  -  total flux cleaned = 0.00365792 Jy
! Component: 2300  -  total flux cleaned = 0.00358087 Jy
! Component: 2350  -  total flux cleaned = 0.00358087 Jy
! Component: 2400  -  total flux cleaned = 0.00365732 Jy
! Component: 2450  -  total flux cleaned = 0.00350684 Jy
! Component: 2500  -  total flux cleaned = 0.00365625 Jy
! Component: 2550  -  total flux cleaned = 0.00361969 Jy
! Component: 2600  -  total flux cleaned = 0.0036929 Jy
! Component: 2650  -  total flux cleaned = 0.00362102 Jy
! Component: 2700  -  total flux cleaned = 0.00369203 Jy
! Component: 2750  -  total flux cleaned = 0.00358617 Jy
! Component: 2800  -  total flux cleaned = 0.00372707 Jy
! Component: 2850  -  total flux cleaned = 0.003797 Jy
! Component: 2900  -  total flux cleaned = 0.00369377 Jy
! Component: 2950  -  total flux cleaned = 0.00355715 Jy
! Component: 3000  -  total flux cleaned = 0.00362515 Jy
! Component: 3050  -  total flux cleaned = 0.00359154 Jy
! Component: 3100  -  total flux cleaned = 0.00349174 Jy
! Component: 3150  -  total flux cleaned = 0.00365685 Jy
! Component: 3200  -  total flux cleaned = 0.00372234 Jy
! Component: 3250  -  total flux cleaned = 0.00369024 Jy
! Component: 3300  -  total flux cleaned = 0.00362662 Jy
! Component: 3350  -  total flux cleaned = 0.00362662 Jy
! Component: 3400  -  total flux cleaned = 0.00387938 Jy
! Component: 3450  -  total flux cleaned = 0.00381619 Jy
! Component: 3500  -  total flux cleaned = 0.00390945 Jy
! Component: 3550  -  total flux cleaned = 0.00393985 Jy
! Component: 3600  -  total flux cleaned = 0.00397032 Jy
! Component: 3650  -  total flux cleaned = 0.00390948 Jy
! Component: 3700  -  total flux cleaned = 0.00399963 Jy
! Component: 3750  -  total flux cleaned = 0.00408953 Jy
! Component: 3800  -  total flux cleaned = 0.004119 Jy
! Component: 3850  -  total flux cleaned = 0.00420733 Jy
! Component: 3900  -  total flux cleaned = 0.00423635 Jy
! Component: 3950  -  total flux cleaned = 0.00429434 Jy
! Component: 4000  -  total flux cleaned = 0.00432298 Jy
! Component: 4050  -  total flux cleaned = 0.00438044 Jy
! Total flux subtracted in 4096 components = 0.00452224 Jy
! Clean residual min=-0.001510 max=0.001481 Jy/beam
! Clean residual mean=-0.000001 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 3.23948 Jy
keep
! Adding 318 model components to the UV plane model.
! The established model now contains 434 components and 3.23948 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0555+3948_X_i_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7908 x 1.472 at 6.554 degrees (North through East)
! Clean map  min=-0.0038536  max=2.0256 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0555+3948_X_i_map.fits
wmodel /image_prod/ug002_uva//J0555+3948_X_i_map.mod
! Writing 434 model components to file: /image_prod/ug002_uva//J0555+3948_X_i_map.mod
wobs   /image_prod/ug002_uva//J0555+3948_X_i_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0555+3948_X_i_uvs.fits
wwins  /image_prod/ug002_uva//J0555+3948_X_i_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0555+3948_X_i_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.02565 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000465278 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.068908 0.068908 0.137816 0.275632 0.551264 1.10253 2.20506 4.41011 8.82022 17.6404 35.2809 70.5618
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.025 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  4353.63 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0555+3948_X_i_dfm.log closed on Wed Mar  4 21:04:57 2020