! Started logfile: /image_prod/ug002_uva//J0555+3948_X_h_dfm.log on Wed Mar 4 21:04:48 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0555+3948_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0555+3948_X_h_uva.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.898039 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8244 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0555+3948_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.582159Jy sigma=8.047740 ! Fit after self-cal, rms=1.493849Jy sigma=4.153094 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.642 mas, bmaj=1.163 mas, bpa=5.445 degrees ! Estimated noise=2.79979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.27171 Jy ! Component: 100 - total flux cleaned = 1.81542 Jy ! Total flux subtracted in 100 components = 1.81542 Jy ! Clean residual min=-0.104528 max=0.352357 Jy/beam ! Clean residual mean=0.000105 rms=0.022863 Jy/beam ! Combined flux in latest and established models = 1.81542 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.81542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.893662Jy sigma=2.483398 ! Fit after self-cal, rms=0.889702Jy sigma=2.469979 ! Inverting map ! Added new window around map position (-0.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.383792 Jy ! Component: 100 - total flux cleaned = 0.619781 Jy ! Total flux subtracted in 100 components = 0.619781 Jy ! Clean residual min=-0.054608 max=0.126246 Jy/beam ! Clean residual mean=0.000077 rms=0.011687 Jy/beam ! Combined flux in latest and established models = 2.4352 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 2.4352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.481782Jy sigma=1.307131 ! Fit after self-cal, rms=0.474994Jy sigma=1.278961 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161686 Jy ! Component: 100 - total flux cleaned = 0.271744 Jy ! Total flux subtracted in 100 components = 0.271744 Jy ! Clean residual min=-0.039389 max=0.061158 Jy/beam ! Clean residual mean=0.000064 rms=0.007781 Jy/beam ! Combined flux in latest and established models = 2.70695 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 2.70695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.327526Jy sigma=0.890030 ! Fit after self-cal, rms=0.326465Jy sigma=0.885839 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0806783 Jy ! Component: 100 - total flux cleaned = 0.139722 Jy ! Total flux subtracted in 100 components = 0.139722 Jy ! Clean residual min=-0.034331 max=0.038550 Jy/beam ! Clean residual mean=0.000058 rms=0.006473 Jy/beam ! Combined flux in latest and established models = 2.84667 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 2.84667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.270139Jy sigma=0.751595 ! Fit after self-cal, rms=0.269915Jy sigma=0.750240 ! Inverting map ! Added new window around map position (8.4, -13.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476006 Jy ! Component: 100 - total flux cleaned = 0.0848717 Jy ! Total flux subtracted in 100 components = 0.0848717 Jy ! Clean residual min=-0.031850 max=0.037903 Jy/beam ! Clean residual mean=0.000054 rms=0.005932 Jy/beam ! Combined flux in latest and established models = 2.93154 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 2.93154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.246091Jy sigma=0.696570 ! Fit after self-cal, rms=0.245967Jy sigma=0.695563 ! Inverting map ! Added new window around map position (-2.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392444 Jy ! Component: 100 - total flux cleaned = 0.0693207 Jy ! Total flux subtracted in 100 components = 0.0693207 Jy ! Clean residual min=-0.028422 max=0.033800 Jy/beam ! Clean residual mean=0.000051 rms=0.005534 Jy/beam ! Combined flux in latest and established models = 3.00086 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 3.00086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229063Jy sigma=0.654381 ! Fit after self-cal, rms=0.228877Jy sigma=0.652952 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7687 mas, bmaj=1.356 mas, bpa=6.156 degrees ! Estimated noise=2.26529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0528604 Jy ! Component: 100 - total flux cleaned = 0.0933846 Jy ! Component: 150 - total flux cleaned = 0.127149 Jy ! Component: 200 - total flux cleaned = 0.155747 Jy ! Total flux subtracted in 200 components = 0.155747 Jy ! Clean residual min=-0.034320 max=0.034262 Jy/beam ! Clean residual mean=0.000076 rms=0.006876 Jy/beam ! Combined flux in latest and established models = 3.15661 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 71 components and 3.15661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.200452Jy sigma=0.586769 ! Fit after self-cal, rms=0.200163Jy sigma=0.585656 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7687 x 1.356 at 6.156 degrees (North through East) ! Clean map min=-0.033243 max=1.8901 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 1.04 ! LA 1.02 MK 1.05 NL 1.06 OV 0.89 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.01 KP 1.05 ! LA 0.99 MK 1.05 NL 1.06 OV 0.92 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.99 KP 1.06 ! LA 1.02 MK 1.05 NL 1.07 OV 0.92 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.01 KP 1.03 ! LA 1.02 MK 1.04 NL 1.07 OV 0.92 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.99 KP 1.05 ! LA 1.01 MK 1.04 NL 1.07 OV 0.92 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 1.04 ! LA 1.02 MK 1.05 NL 1.07 OV 0.84 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.02 KP 1.04 ! LA 1.01 MK 1.06 NL 1.06 OV 0.92 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.06 ! LA 1.02 MK 1.07 NL 1.07 OV 0.90 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.00 KP 1.04 ! LA 1.01 MK 1.06 NL 1.09 OV 0.92 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.03 ! LA 1.02 MK 1.06 NL 1.08 OV 0.92 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00 KP 1.06 ! LA 1.01 MK 1.05 NL 1.07 OV 0.91 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.01 KP 1.06 ! LA 1.04 MK 1.05 NL 1.08 OV 0.94 ! PT 0.91 SC 1.00 ! ! ! Fit before self-cal, rms=0.200163Jy sigma=0.585656 ! Fit after self-cal, rms=0.089278Jy sigma=0.311775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7746 mas, bmaj=1.365 mas, bpa=7.024 degrees ! Estimated noise=2.26592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0180005 Jy ! Component: 100 - total flux cleaned = -0.02488 Jy ! Component: 150 - total flux cleaned = -0.0313204 Jy ! Component: 200 - total flux cleaned = -0.0359562 Jy ! Total flux subtracted in 200 components = -0.0359562 Jy ! Clean residual min=-0.013811 max=0.010907 Jy/beam ! Clean residual mean=0.000010 rms=0.002341 Jy/beam ! Combined flux in latest and established models = 3.12065 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 3.12065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083009Jy sigma=0.290571 ! Fit after self-cal, rms=0.082638Jy sigma=0.289817 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082638Jy sigma=0.289817 ! Fit after self-cal, rms=0.072515Jy sigma=0.256601 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7729 mas, bmaj=1.364 mas, bpa=6.791 degrees ! Estimated noise=2.2602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00756703 Jy ! Component: 100 - total flux cleaned = -0.0110629 Jy ! Component: 150 - total flux cleaned = -0.0146358 Jy ! Component: 200 - total flux cleaned = -0.0174795 Jy ! Total flux subtracted in 200 components = -0.0174795 Jy ! Clean residual min=-0.007687 max=0.009453 Jy/beam ! Clean residual mean=0.000000 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 3.10317 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 102 components and 3.10317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069245Jy sigma=0.246836 ! Fit after self-cal, rms=0.069135Jy sigma=0.246565 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063548 Jy ! Component: 100 - total flux cleaned = 0.00482307 Jy ! Component: 150 - total flux cleaned = 0.00342684 Jy ! Component: 200 - total flux cleaned = 0.00198983 Jy ! Total flux subtracted in 200 components = 0.00198983 Jy ! Clean residual min=-0.007175 max=0.007077 Jy/beam ! Clean residual mean=0.000002 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 3.10516 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 113 components and 3.10516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067425Jy sigma=0.241590 ! Fit after self-cal, rms=0.067372Jy sigma=0.241401 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067372Jy sigma=0.241401 ! Fit after self-cal, rms=0.066051Jy sigma=0.238681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7722 mas, bmaj=1.365 mas, bpa=6.863 degrees ! Estimated noise=2.2591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00523768 Jy ! Component: 100 - total flux cleaned = -0.00685082 Jy ! Component: 150 - total flux cleaned = -0.00785744 Jy ! Component: 200 - total flux cleaned = -0.00911441 Jy ! Total flux subtracted in 200 components = -0.00911441 Jy ! Clean residual min=-0.006272 max=0.007169 Jy/beam ! Clean residual mean=-0.000000 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 3.09605 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 118 components and 3.09605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064521Jy sigma=0.234027 ! Fit after self-cal, rms=0.064492Jy sigma=0.233965 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481926 Jy ! Component: 100 - total flux cleaned = 0.00466675 Jy ! Component: 150 - total flux cleaned = 0.00391049 Jy ! Component: 200 - total flux cleaned = 0.00335241 Jy ! Total flux subtracted in 200 components = 0.00335241 Jy ! Clean residual min=-0.005790 max=0.005734 Jy/beam ! Clean residual mean=0.000001 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 3.0994 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 134 components and 3.0994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063546Jy sigma=0.230856 ! Fit after self-cal, rms=0.063522Jy sigma=0.230794 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063522Jy sigma=0.230794 ! Fit after self-cal, rms=0.062727Jy sigma=0.229476 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.872 mas, bmaj=2.452 mas, bpa=8.094 degrees ! Estimated noise=3.95042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00825453 Jy ! Component: 100 - total flux cleaned = -0.00974126 Jy ! Component: 150 - total flux cleaned = -0.0110368 Jy ! Component: 200 - total flux cleaned = -0.0125505 Jy ! Total flux subtracted in 200 components = -0.0125505 Jy ! Clean residual min=-0.006354 max=0.007505 Jy/beam ! Clean residual mean=0.000002 rms=0.001800 Jy/beam ! Combined flux in latest and established models = 3.08685 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 146 components and 3.08685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062008Jy sigma=0.230685 ! Fit after self-cal, rms=0.062018Jy sigma=0.230493 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00212511 Jy ! Component: 100 - total flux cleaned = -0.00356089 Jy ! Component: 150 - total flux cleaned = -0.00503149 Jy ! Component: 200 - total flux cleaned = -0.00614067 Jy ! Total flux subtracted in 200 components = -0.00614067 Jy ! Clean residual min=-0.006130 max=0.007186 Jy/beam ! Clean residual mean=0.000002 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 3.08071 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 155 components and 3.08071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061863Jy sigma=0.231481 ! Fit after self-cal, rms=0.061880Jy sigma=0.231451 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7716 mas, bmaj=1.364 mas, bpa=6.935 degrees ! Estimated noise=2.25789 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7716 x 1.364 at 6.935 degrees (North through East) ! Clean map min=-0.0072895 max=1.8871 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061880Jy sigma=0.231451 ! Fit after self-cal, rms=0.059961Jy sigma=0.216053 ! Inverting map and beam ! Estimated beam: bmin=0.7718 mas, bmaj=1.364 mas, bpa=6.927 degrees ! Estimated noise=2.26005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111934 Jy ! Component: 100 - total flux cleaned = -0.00128944 Jy ! Component: 150 - total flux cleaned = -0.00223605 Jy ! Component: 200 - total flux cleaned = -0.00281197 Jy ! Total flux subtracted in 200 components = -0.00281197 Jy ! Clean residual min=-0.005796 max=0.004985 Jy/beam ! Clean residual mean=0.000002 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 3.0779 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 163 components and 3.0779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059232Jy sigma=0.212132 ! Fit after self-cal, rms=0.059193Jy sigma=0.212051 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393246 Jy ! Component: 100 - total flux cleaned = -0.000640151 Jy ! Component: 150 - total flux cleaned = -0.000985989 Jy ! Component: 200 - total flux cleaned = -0.00142696 Jy ! Total flux subtracted in 200 components = -0.00142696 Jy ! Clean residual min=-0.005541 max=0.004699 Jy/beam ! Clean residual mean=0.000002 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 3.07647 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 172 components and 3.07647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058820Jy sigma=0.210114 ! Fit after self-cal, rms=0.058804Jy sigma=0.210081 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058804Jy sigma=0.210081 ! Fit after self-cal, rms=0.058360Jy sigma=0.209473 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.644 mas, bmaj=1.169 mas, bpa=6.367 degrees ! Estimated noise=2.79699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.27153 Jy ! Component: 100 - total flux cleaned = 1.85368 Jy ! Component: 150 - total flux cleaned = 2.20422 Jy ! Component: 200 - total flux cleaned = 2.42854 Jy ! Total flux subtracted in 200 components = 2.42854 Jy ! Clean residual min=-0.040372 max=0.122053 Jy/beam ! Clean residual mean=0.000040 rms=0.009631 Jy/beam ! Combined flux in latest and established models = 2.42854 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 2.42854 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7713 mas, bmaj=1.363 mas, bpa=6.982 degrees ! Estimated noise=2.25954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.232101 Jy ! Component: 100 - total flux cleaned = 0.365408 Jy ! Component: 150 - total flux cleaned = 0.445786 Jy ! Component: 200 - total flux cleaned = 0.496994 Jy ! Total flux subtracted in 200 components = 0.496994 Jy ! Clean residual min=-0.014247 max=0.031878 Jy/beam ! Clean residual mean=0.000019 rms=0.003213 Jy/beam ! Combined flux in latest and established models = 2.92553 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 2.92554 Jy ! Inverting map ! Added new window around map position (0.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0358083 Jy ! Component: 100 - total flux cleaned = 0.0615317 Jy ! Component: 150 - total flux cleaned = 0.0808857 Jy ! Component: 200 - total flux cleaned = 0.0942814 Jy ! Total flux subtracted in 200 components = 0.0942814 Jy ! Clean residual min=-0.010366 max=0.015037 Jy/beam ! Clean residual mean=0.000007 rms=0.001798 Jy/beam ! Combined flux in latest and established models = 3.01982 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 50 components and 3.01982 Jy ! Inverting map ! Added new window around map position (-1.6, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128165 Jy ! Component: 100 - total flux cleaned = 0.0198117 Jy ! Component: 150 - total flux cleaned = 0.025157 Jy ! Component: 200 - total flux cleaned = 0.0299837 Jy ! Total flux subtracted in 200 components = 0.0299837 Jy ! Clean residual min=-0.008634 max=0.007405 Jy/beam ! Clean residual mean=0.000004 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 3.0498 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 3.0498 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.873 mas, bmaj=2.451 mas, bpa=8.138 degrees ! Estimated noise=3.95677 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102882 Jy ! Component: 100 - total flux cleaned = 0.0144427 Jy ! Component: 150 - total flux cleaned = 0.0165063 Jy ! Component: 200 - total flux cleaned = 0.0175795 Jy ! Total flux subtracted in 200 components = 0.0175795 Jy ! Clean residual min=-0.005891 max=0.006934 Jy/beam ! Clean residual mean=0.000002 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 3.06738 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.8, -21.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00561087 Jy ! Component: 100 - total flux cleaned = 0.00669218 Jy ! Component: 150 - total flux cleaned = 0.00695666 Jy ! Component: 200 - total flux cleaned = 0.00720156 Jy ! Total flux subtracted in 200 components = 0.00720156 Jy ! Clean residual min=-0.005236 max=0.005767 Jy/beam ! Clean residual mean=0.000004 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 3.07458 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 118 components and 3.07458 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7713 mas, bmaj=1.363 mas, bpa=6.982 degrees ! Estimated noise=2.25954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032048 Jy ! Component: 100 - total flux cleaned = 0.000789488 Jy ! Component: 150 - total flux cleaned = 0.00155376 Jy ! Component: 200 - total flux cleaned = 0.00202 Jy ! Total flux subtracted in 200 components = 0.00202 Jy ! Clean residual min=-0.007656 max=0.007188 Jy/beam ! Clean residual mean=0.000002 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 3.0766 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 130 components and 3.0766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060363Jy sigma=0.226086 ! Fit after self-cal, rms=0.060370Jy sigma=0.225115 wmodel J0555+3948_X_h_map.mod ! Writing 130 model components to file: J0555+3948_X_h_map.mod wobs J0555+3948_X_h_uvs.fits ! Writing UV FITS file: J0555+3948_X_h_uvs.fits wwins J0555+3948_X_h_map.win ! wwins: Wrote 10 windows to J0555+3948_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131233 Jy ! Component: 100 - total flux cleaned = -0.00191416 Jy ! Component: 150 - total flux cleaned = -0.00147238 Jy ! Component: 200 - total flux cleaned = -0.000840917 Jy ! Component: 250 - total flux cleaned = -2.87227e-05 Jy ! Component: 300 - total flux cleaned = 0.000559136 Jy ! Component: 350 - total flux cleaned = 0.00112722 Jy ! Component: 400 - total flux cleaned = 0.00167568 Jy ! Component: 450 - total flux cleaned = 0.00203133 Jy ! Component: 500 - total flux cleaned = 0.00281239 Jy ! Component: 550 - total flux cleaned = 0.00306597 Jy ! Component: 600 - total flux cleaned = 0.00356184 Jy ! Component: 650 - total flux cleaned = 0.00396531 Jy ! Component: 700 - total flux cleaned = 0.00428287 Jy ! Component: 750 - total flux cleaned = 0.00451475 Jy ! Component: 800 - total flux cleaned = 0.00466527 Jy ! Component: 850 - total flux cleaned = 0.00459137 Jy ! Component: 900 - total flux cleaned = 0.00466219 Jy ! Component: 950 - total flux cleaned = 0.00444781 Jy ! Component: 1000 - total flux cleaned = 0.00472986 Jy ! Component: 1050 - total flux cleaned = 0.00472842 Jy ! Component: 1100 - total flux cleaned = 0.00472809 Jy ! Component: 1150 - total flux cleaned = 0.00472884 Jy ! Component: 1200 - total flux cleaned = 0.00459819 Jy ! Component: 1250 - total flux cleaned = 0.00486055 Jy ! Component: 1300 - total flux cleaned = 0.00492666 Jy ! Component: 1350 - total flux cleaned = 0.00511551 Jy ! Component: 1400 - total flux cleaned = 0.00511658 Jy ! Component: 1450 - total flux cleaned = 0.00523856 Jy ! Component: 1500 - total flux cleaned = 0.00535908 Jy ! Component: 1550 - total flux cleaned = 0.0052401 Jy ! Component: 1600 - total flux cleaned = 0.00535899 Jy ! Component: 1650 - total flux cleaned = 0.00530129 Jy ! Component: 1700 - total flux cleaned = 0.00564638 Jy ! Component: 1750 - total flux cleaned = 0.00564629 Jy ! Component: 1800 - total flux cleaned = 0.00575972 Jy ! Component: 1850 - total flux cleaned = 0.00598319 Jy ! Component: 1900 - total flux cleaned = 0.00625634 Jy ! Component: 1950 - total flux cleaned = 0.00630992 Jy ! Component: 2000 - total flux cleaned = 0.00668385 Jy ! Component: 2050 - total flux cleaned = 0.00663123 Jy ! Component: 2100 - total flux cleaned = 0.00689123 Jy ! Component: 2150 - total flux cleaned = 0.00704689 Jy ! Component: 2200 - total flux cleaned = 0.00725165 Jy ! Component: 2250 - total flux cleaned = 0.00735311 Jy ! Component: 2300 - total flux cleaned = 0.00770366 Jy ! Component: 2350 - total flux cleaned = 0.00824777 Jy ! Component: 2400 - total flux cleaned = 0.00824798 Jy ! Component: 2450 - total flux cleaned = 0.0084898 Jy ! Component: 2500 - total flux cleaned = 0.00853819 Jy ! Component: 2550 - total flux cleaned = 0.00868064 Jy ! Component: 2600 - total flux cleaned = 0.00905719 Jy ! Component: 2650 - total flux cleaned = 0.00905758 Jy ! Component: 2700 - total flux cleaned = 0.00910428 Jy ! Component: 2750 - total flux cleaned = 0.00901232 Jy ! Component: 2800 - total flux cleaned = 0.00932998 Jy ! Component: 2850 - total flux cleaned = 0.00923975 Jy ! Component: 2900 - total flux cleaned = 0.00923976 Jy ! Component: 2950 - total flux cleaned = 0.00937237 Jy ! Component: 3000 - total flux cleaned = 0.00937247 Jy ! Component: 3050 - total flux cleaned = 0.00950303 Jy ! Component: 3100 - total flux cleaned = 0.00954621 Jy ! Component: 3150 - total flux cleaned = 0.00984357 Jy ! Component: 3200 - total flux cleaned = 0.00967504 Jy ! Component: 3250 - total flux cleaned = 0.00980074 Jy ! Component: 3300 - total flux cleaned = 0.00975937 Jy ! Component: 3350 - total flux cleaned = 0.00984091 Jy ! Component: 3400 - total flux cleaned = 0.0100851 Jy ! Component: 3450 - total flux cleaned = 0.0101256 Jy ! Component: 3500 - total flux cleaned = 0.0103254 Jy ! Component: 3550 - total flux cleaned = 0.0105242 Jy ! Component: 3600 - total flux cleaned = 0.0106028 Jy ! Component: 3650 - total flux cleaned = 0.01072 Jy ! Component: 3700 - total flux cleaned = 0.0106813 Jy ! Component: 3750 - total flux cleaned = 0.0107584 Jy ! Component: 3800 - total flux cleaned = 0.0110631 Jy ! Component: 3850 - total flux cleaned = 0.0110635 Jy ! Component: 3900 - total flux cleaned = 0.0111388 Jy ! Component: 3950 - total flux cleaned = 0.0112506 Jy ! Component: 4000 - total flux cleaned = 0.0112506 Jy ! Component: 4050 - total flux cleaned = 0.0113966 Jy ! Total flux subtracted in 4096 components = 0.0114329 Jy ! Clean residual min=-0.001880 max=0.001876 Jy/beam ! Clean residual mean=0.000000 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 3.08803 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 423 components and 3.08803 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0555+3948_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7713 x 1.363 at 6.982 degrees (North through East) ! Clean map min=-0.0046679 max=1.9001 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0555+3948_X_h_map.fits wmodel /image_prod/ug002_uva//J0555+3948_X_h_map.mod ! Writing 423 model components to file: /image_prod/ug002_uva//J0555+3948_X_h_map.mod wobs /image_prod/ug002_uva//J0555+3948_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0555+3948_X_h_uvs.fits wwins /image_prod/ug002_uva//J0555+3948_X_h_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0555+3948_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.90009 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000587778 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0928028 0.0928028 0.185606 0.371211 0.742422 1.48484 2.96969 5.93938 11.8788 23.7575 47.515 95.03 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.9 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3232.66 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0555+3948_X_h_dfm.log closed on Wed Mar 4 21:04:52 2020