! Started logfile: /image_prod/ug002_uva//J0555+3948_X_d_dfm.log on Wed Mar 4 21:04:25 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0555+3948_X_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0555+3948_X_d_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.797531 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7752 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0555+3948_X_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.800963Jy sigma=7.925189 ! Fit after self-cal, rms=1.736729Jy sigma=4.358953 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6416 mas, bmaj=1.484 mas, bpa=8.923 degrees ! Estimated noise=3.29593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.43372 Jy ! Component: 100 - total flux cleaned = 2.0445 Jy ! Total flux subtracted in 100 components = 2.0445 Jy ! Clean residual min=-0.109563 max=0.292653 Jy/beam ! Clean residual mean=0.000044 rms=0.025173 Jy/beam ! Combined flux in latest and established models = 2.0445 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 2.0445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.980456Jy sigma=2.415260 ! Fit after self-cal, rms=0.972689Jy sigma=2.381413 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.344932 Jy ! Component: 100 - total flux cleaned = 0.540988 Jy ! Total flux subtracted in 100 components = 0.540988 Jy ! Clean residual min=-0.087135 max=0.125282 Jy/beam ! Clean residual mean=0.000036 rms=0.019152 Jy/beam ! Combined flux in latest and established models = 2.58549 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 2.58549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.665067Jy sigma=1.771593 ! Fit after self-cal, rms=0.663414Jy sigma=1.766313 ! Inverting map ! Added new window around map position (-1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141691 Jy ! Component: 100 - total flux cleaned = 0.246013 Jy ! Total flux subtracted in 100 components = 0.246013 Jy ! Clean residual min=-0.083729 max=0.114293 Jy/beam ! Clean residual mean=0.000033 rms=0.017926 Jy/beam ! Combined flux in latest and established models = 2.8315 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 2.8315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.566356Jy sigma=1.611336 ! Fit after self-cal, rms=0.565724Jy sigma=1.607590 ! Inverting map ! Added new window around map position (4.8, -12.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106206 Jy ! Component: 100 - total flux cleaned = 0.18431 Jy ! Total flux subtracted in 100 components = 0.18431 Jy ! Clean residual min=-0.073069 max=0.102753 Jy/beam ! Clean residual mean=0.000030 rms=0.016716 Jy/beam ! Combined flux in latest and established models = 3.01581 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 3.01581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.521782Jy sigma=1.503047 ! Fit after self-cal, rms=0.521114Jy sigma=1.499708 ! Inverting map ! Added new window around map position (1.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101582 Jy ! Component: 100 - total flux cleaned = 0.169348 Jy ! Total flux subtracted in 100 components = 0.169348 Jy ! Clean residual min=-0.067405 max=0.084487 Jy/beam ! Clean residual mean=0.000030 rms=0.015534 Jy/beam ! Combined flux in latest and established models = 3.18516 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 44 components and 3.18516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.476822Jy sigma=1.390628 ! Fit after self-cal, rms=0.474708Jy sigma=1.385968 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7975 mas, bmaj=1.666 mas, bpa=8.625 degrees ! Estimated noise=2.57343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110184 Jy ! Component: 100 - total flux cleaned = 0.193046 Jy ! Component: 150 - total flux cleaned = 0.258641 Jy ! Component: 200 - total flux cleaned = 0.312323 Jy ! Total flux subtracted in 200 components = 0.312323 Jy ! Clean residual min=-0.077913 max=0.091431 Jy/beam ! Clean residual mean=-0.000060 rms=0.018683 Jy/beam ! Combined flux in latest and established models = 3.49749 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 60 components and 3.49749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.415928Jy sigma=1.288760 ! Fit after self-cal, rms=0.415466Jy sigma=1.286762 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7975 x 1.666 at 8.625 degrees (North through East) ! Clean map min=-0.07385 max=2.0063 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 0.89 KP 1.04 ! LA 0.92 MK 1.03 NL 1.19 OV 0.95 ! PT 0.85 SC 1.13 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.96 HN 0.90 KP 1.04 ! LA 0.92 MK 1.05 NL 1.19 OV 0.96 ! PT 0.87 SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.96 HN 0.91 KP 1.02 ! LA 0.94 MK 1.01 NL 1.20 OV 0.95 ! PT 0.88 SC 1.14 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.89 KP 1.02 ! LA 0.94 MK 1.04 NL 1.21 OV 0.96 ! PT 0.85 SC 1.13 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 0.91 KP 1.04 ! LA 0.96 MK 1.04 NL 1.21 OV 0.96 ! PT 0.88 SC 1.16 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.97 HN 0.91 KP 1.03 ! LA 0.95 MK 1.06 NL 1.21 OV 0.94 ! PT 0.88 SC 1.15 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.95 KP 1.04 ! LA 0.96 MK 1.08 NL 1.26 OV 0.96 ! PT 0.87 SC 1.17 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.95 KP 1.03 ! LA 0.95 MK 1.06 NL 1.20 OV 0.96 ! PT 0.86 SC 1.22 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 0.96 KP 1.05 ! LA 0.97 MK 1.03 NL 1.22 OV 0.96 ! PT 0.88 SC 1.20 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 0.96 KP 1.03 ! LA 0.96 MK 1.09 NL 1.23 OV 0.99 ! PT 0.87 SC 1.19 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 0.95 KP 1.05 ! LA 0.97 MK 1.08 NL 1.23 OV 0.99 ! PT 0.88 SC 1.20 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.98 KP 1.04 ! LA 0.97 MK 1.06 NL 1.24 OV 1.01 ! PT 0.86 SC 1.20 ! ! ! Fit before self-cal, rms=0.415466Jy sigma=1.286762 ! Fit after self-cal, rms=0.269269Jy sigma=0.846497 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8207 mas, bmaj=1.682 mas, bpa=7.86 degrees ! Estimated noise=2.62185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0135448 Jy ! Component: 100 - total flux cleaned = -0.0417765 Jy ! Component: 150 - total flux cleaned = -0.0635361 Jy ! Component: 200 - total flux cleaned = -0.0793604 Jy ! Total flux subtracted in 200 components = -0.0793604 Jy ! Clean residual min=-0.046016 max=0.052794 Jy/beam ! Clean residual mean=0.000029 rms=0.010227 Jy/beam ! Combined flux in latest and established models = 3.41812 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 83 components and 3.41812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.244657Jy sigma=0.762294 ! Fit after self-cal, rms=0.243520Jy sigma=0.759435 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.243520Jy sigma=0.759435 ! Fit after self-cal, rms=0.168449Jy sigma=0.512366 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8103 mas, bmaj=1.679 mas, bpa=9.3 degrees ! Estimated noise=2.59127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0376249 Jy ! Component: 100 - total flux cleaned = -0.0580254 Jy ! Component: 150 - total flux cleaned = -0.0671093 Jy ! Component: 200 - total flux cleaned = -0.0746972 Jy ! Total flux subtracted in 200 components = -0.0746972 Jy ! Clean residual min=-0.025216 max=0.027787 Jy/beam ! Clean residual mean=0.000018 rms=0.005193 Jy/beam ! Combined flux in latest and established models = 3.34343 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 97 components and 3.34343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.149410Jy sigma=0.453634 ! Fit after self-cal, rms=0.148331Jy sigma=0.451200 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.2, 11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486611 Jy ! Component: 100 - total flux cleaned = 0.00102617 Jy ! Component: 150 - total flux cleaned = -0.00222272 Jy ! Component: 200 - total flux cleaned = -0.00457129 Jy ! Total flux subtracted in 200 components = -0.00457129 Jy ! Clean residual min=-0.023226 max=0.025640 Jy/beam ! Clean residual mean=0.000017 rms=0.004794 Jy/beam ! Combined flux in latest and established models = 3.33886 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 115 components and 3.33886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141076Jy sigma=0.424620 ! Fit after self-cal, rms=0.140398Jy sigma=0.422980 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.140398Jy sigma=0.422980 ! Fit after self-cal, rms=0.133037Jy sigma=0.403617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8061 mas, bmaj=1.678 mas, bpa=9.457 degrees ! Estimated noise=2.58317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.023162 Jy ! Component: 100 - total flux cleaned = -0.03135 Jy ! Component: 150 - total flux cleaned = -0.0374298 Jy ! Component: 200 - total flux cleaned = -0.0391864 Jy ! Total flux subtracted in 200 components = -0.0391864 Jy ! Clean residual min=-0.020426 max=0.021031 Jy/beam ! Clean residual mean=0.000015 rms=0.003927 Jy/beam ! Combined flux in latest and established models = 3.29967 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 121 components and 3.29967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123327Jy sigma=0.374051 ! Fit after self-cal, rms=0.122796Jy sigma=0.373010 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0059158 Jy ! Component: 100 - total flux cleaned = 0.00329591 Jy ! Component: 150 - total flux cleaned = 0.00237172 Jy ! Component: 200 - total flux cleaned = 0.00150928 Jy ! Total flux subtracted in 200 components = 0.00150928 Jy ! Clean residual min=-0.018805 max=0.016916 Jy/beam ! Clean residual mean=0.000016 rms=0.003658 Jy/beam ! Combined flux in latest and established models = 3.30118 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 134 components and 3.30118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.118193Jy sigma=0.357683 ! Fit after self-cal, rms=0.117847Jy sigma=0.356975 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117847Jy sigma=0.356975 ! Fit after self-cal, rms=0.113569Jy sigma=0.346806 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.94 mas, bmaj=2.394 mas, bpa=4.236 degrees ! Estimated noise=4.15058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.019265 Jy ! Component: 100 - total flux cleaned = -0.0252622 Jy ! Component: 150 - total flux cleaned = -0.0288239 Jy ! Component: 200 - total flux cleaned = -0.0322881 Jy ! Total flux subtracted in 200 components = -0.0322881 Jy ! Clean residual min=-0.019016 max=0.017010 Jy/beam ! Clean residual mean=0.000037 rms=0.004244 Jy/beam ! Combined flux in latest and established models = 3.26889 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 150 components and 3.26889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108299Jy sigma=0.340325 ! Fit after self-cal, rms=0.108033Jy sigma=0.338853 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00282134 Jy ! Component: 100 - total flux cleaned = -0.0050044 Jy ! Component: 150 - total flux cleaned = -0.00499383 Jy ! Component: 200 - total flux cleaned = -0.00498688 Jy ! Total flux subtracted in 200 components = -0.00498688 Jy ! Clean residual min=-0.018327 max=0.016050 Jy/beam ! Clean residual mean=0.000037 rms=0.004058 Jy/beam ! Combined flux in latest and established models = 3.26391 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 162 components and 3.2639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106602Jy sigma=0.337597 ! Fit after self-cal, rms=0.106489Jy sigma=0.337202 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8031 mas, bmaj=1.678 mas, bpa=9.553 degrees ! Estimated noise=2.57626 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8031 x 1.678 at 9.553 degrees (North through East) ! Clean map min=-0.016671 max=2.0067 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106489Jy sigma=0.337202 ! Fit after self-cal, rms=0.100999Jy sigma=0.313820 ! Inverting map and beam ! Estimated beam: bmin=0.8017 mas, bmaj=1.68 mas, bpa=9.434 degrees ! Estimated noise=2.57188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0118841 Jy ! Component: 100 - total flux cleaned = -0.0153561 Jy ! Component: 150 - total flux cleaned = -0.016603 Jy ! Component: 200 - total flux cleaned = -0.0169703 Jy ! Total flux subtracted in 200 components = -0.0169703 Jy ! Clean residual min=-0.015309 max=0.013800 Jy/beam ! Clean residual mean=0.000010 rms=0.002743 Jy/beam ! Combined flux in latest and established models = 3.24693 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 169 components and 3.24693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097191Jy sigma=0.298575 ! Fit after self-cal, rms=0.096968Jy sigma=0.298305 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410878 Jy ! Component: 100 - total flux cleaned = -0.00133069 Jy ! Component: 150 - total flux cleaned = -0.00160982 Jy ! Component: 200 - total flux cleaned = -0.00160691 Jy ! Total flux subtracted in 200 components = -0.00160691 Jy ! Clean residual min=-0.014653 max=0.012961 Jy/beam ! Clean residual mean=0.000010 rms=0.002643 Jy/beam ! Combined flux in latest and established models = 3.24533 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 182 components and 3.24533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095489Jy sigma=0.292211 ! Fit after self-cal, rms=0.095399Jy sigma=0.292110 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095399Jy sigma=0.292110 ! Fit after self-cal, rms=0.092996Jy sigma=0.287808 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6443 mas, bmaj=1.493 mas, bpa=9.685 degrees ! Estimated noise=3.29937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.43914 Jy ! Component: 100 - total flux cleaned = 2.07347 Jy ! Component: 150 - total flux cleaned = 2.41452 Jy ! Component: 200 - total flux cleaned = 2.61174 Jy ! Total flux subtracted in 200 components = 2.61174 Jy ! Clean residual min=-0.039843 max=0.103238 Jy/beam ! Clean residual mean=0.000019 rms=0.009081 Jy/beam ! Combined flux in latest and established models = 2.61174 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 2.61174 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7998 mas, bmaj=1.679 mas, bpa=9.524 degrees ! Estimated noise=2.56838 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.191401 Jy ! Component: 100 - total flux cleaned = 0.296353 Jy ! Component: 150 - total flux cleaned = 0.364598 Jy ! Component: 200 - total flux cleaned = 0.414524 Jy ! Total flux subtracted in 200 components = 0.414524 Jy ! Clean residual min=-0.017971 max=0.034894 Jy/beam ! Clean residual mean=-0.000016 rms=0.004828 Jy/beam ! Combined flux in latest and established models = 3.02627 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 39 components and 3.02627 Jy ! Inverting map ! Added new window around map position (-2, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0407092 Jy ! Component: 100 - total flux cleaned = 0.0729607 Jy ! Component: 150 - total flux cleaned = 0.0994247 Jy ! Component: 200 - total flux cleaned = 0.12185 Jy ! Total flux subtracted in 200 components = 0.12185 Jy ! Clean residual min=-0.014647 max=0.021474 Jy/beam ! Clean residual mean=-0.000001 rms=0.003346 Jy/beam ! Combined flux in latest and established models = 3.14812 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 58 components and 3.14812 Jy ! Inverting map ! Added new window around map position (-0.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215058 Jy ! Component: 100 - total flux cleaned = 0.0379062 Jy ! Component: 150 - total flux cleaned = 0.0505154 Jy ! Component: 200 - total flux cleaned = 0.0591105 Jy ! Total flux subtracted in 200 components = 0.0591105 Jy ! Clean residual min=-0.012879 max=0.016687 Jy/beam ! Clean residual mean=0.000004 rms=0.002810 Jy/beam ! Combined flux in latest and established models = 3.20723 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 80 components and 3.20723 Jy ! Inverting map ! Added new window around map position (6.2, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011662 Jy ! Component: 100 - total flux cleaned = 0.0172168 Jy ! Component: 150 - total flux cleaned = 0.0210493 Jy ! Component: 200 - total flux cleaned = 0.0246455 Jy ! Total flux subtracted in 200 components = 0.0246455 Jy ! Clean residual min=-0.010949 max=0.012905 Jy/beam ! Clean residual mean=0.000005 rms=0.002544 Jy/beam ! Combined flux in latest and established models = 3.23187 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 101 components and 3.23187 Jy ! Inverting map ! Added new window around map position (2.4, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00554716 Jy ! Component: 100 - total flux cleaned = 0.00968904 Jy ! Component: 150 - total flux cleaned = 0.0121447 Jy ! Component: 200 - total flux cleaned = 0.0144418 Jy ! Total flux subtracted in 200 components = 0.0144418 Jy ! Clean residual min=-0.010206 max=0.011934 Jy/beam ! Clean residual mean=0.000008 rms=0.002356 Jy/beam ! Combined flux in latest and established models = 3.24631 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 119 components and 3.24632 Jy ! Inverting map ! Added new window around map position (7, -11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586411 Jy ! Component: 100 - total flux cleaned = 0.00809383 Jy ! Component: 150 - total flux cleaned = 0.00957637 Jy ! Component: 200 - total flux cleaned = 0.0101328 Jy ! Total flux subtracted in 200 components = 0.0101328 Jy ! Clean residual min=-0.009511 max=0.010403 Jy/beam ! Clean residual mean=0.000007 rms=0.002199 Jy/beam ! Combined flux in latest and established models = 3.25645 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 133 components and 3.25645 Jy ! Inverting map ! Added new window around map position (1.4, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143713 Jy ! Component: 100 - total flux cleaned = 0.0020112 Jy ! Component: 150 - total flux cleaned = 0.00253815 Jy ! Component: 200 - total flux cleaned = 0.00352608 Jy ! Total flux subtracted in 200 components = 0.00352608 Jy ! Clean residual min=-0.009188 max=0.009497 Jy/beam ! Clean residual mean=0.000006 rms=0.002071 Jy/beam ! Combined flux in latest and established models = 3.25997 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 160 components and 3.25997 Jy ! Inverting map ! Added new window around map position (-5.4, -19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00740749 Jy ! Component: 100 - total flux cleaned = 0.00964101 Jy ! Component: 150 - total flux cleaned = 0.0112766 Jy ! Component: 200 - total flux cleaned = 0.012397 Jy ! Total flux subtracted in 200 components = 0.012397 Jy ! Clean residual min=-0.008887 max=0.008537 Jy/beam ! Clean residual mean=0.000005 rms=0.001961 Jy/beam ! Combined flux in latest and established models = 3.27237 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 175 components and 3.27237 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.942 mas, bmaj=2.394 mas, bpa=4.749 degrees ! Estimated noise=4.15378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0006131 Jy ! Component: 100 - total flux cleaned = 0.000604401 Jy ! Component: 150 - total flux cleaned = 0.00159695 Jy ! Component: 200 - total flux cleaned = 0.00251905 Jy ! Total flux subtracted in 200 components = 0.00251905 Jy ! Clean residual min=-0.012270 max=0.012192 Jy/beam ! Clean residual mean=0.000004 rms=0.002738 Jy/beam ! Combined flux in latest and established models = 3.27489 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226227 Jy ! Component: 100 - total flux cleaned = 0.000240402 Jy ! Component: 150 - total flux cleaned = 0.000432214 Jy ! Component: 200 - total flux cleaned = 0.000435743 Jy ! Total flux subtracted in 200 components = 0.000435743 Jy ! Clean residual min=-0.012058 max=0.011494 Jy/beam ! Clean residual mean=0.000003 rms=0.002635 Jy/beam ! Combined flux in latest and established models = 3.27533 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 214 components and 3.27533 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7998 mas, bmaj=1.679 mas, bpa=9.524 degrees ! Estimated noise=2.56838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00441251 Jy ! Component: 100 - total flux cleaned = -0.00484781 Jy ! Component: 150 - total flux cleaned = -0.00424849 Jy ! Component: 200 - total flux cleaned = -0.00405897 Jy ! Total flux subtracted in 200 components = -0.00405897 Jy ! Clean residual min=-0.008158 max=0.008096 Jy/beam ! Clean residual mean=0.000003 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 3.27127 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 238 components and 3.27127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081540Jy sigma=0.250124 ! Fit after self-cal, rms=0.080650Jy sigma=0.246158 wmodel J0555+3948_X_d_map.mod ! Writing 238 model components to file: J0555+3948_X_d_map.mod wobs J0555+3948_X_d_uvs.fits ! Writing UV FITS file: J0555+3948_X_d_uvs.fits wwins J0555+3948_X_d_map.win ! wwins: Wrote 14 windows to J0555+3948_X_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120289 Jy ! Component: 100 - total flux cleaned = -0.00145995 Jy ! Component: 150 - total flux cleaned = -0.00195866 Jy ! Component: 200 - total flux cleaned = -0.00256507 Jy ! Component: 250 - total flux cleaned = -0.00327775 Jy ! Component: 300 - total flux cleaned = -0.00362573 Jy ! Component: 350 - total flux cleaned = -0.00407935 Jy ! Component: 400 - total flux cleaned = -0.00441195 Jy ! Component: 450 - total flux cleaned = -0.00473706 Jy ! Component: 500 - total flux cleaned = -0.0050547 Jy ! Component: 550 - total flux cleaned = -0.00526428 Jy ! Component: 600 - total flux cleaned = -0.00536874 Jy ! Component: 650 - total flux cleaned = -0.0057744 Jy ! Component: 700 - total flux cleaned = -0.00577241 Jy ! Component: 750 - total flux cleaned = -0.00508567 Jy ! Component: 800 - total flux cleaned = -0.00508575 Jy ! Component: 850 - total flux cleaned = -0.00470449 Jy ! Component: 900 - total flux cleaned = -0.00451664 Jy ! Component: 950 - total flux cleaned = -0.00433141 Jy ! Component: 1000 - total flux cleaned = -0.00350784 Jy ! Component: 1050 - total flux cleaned = -0.00323765 Jy ! Component: 1100 - total flux cleaned = -0.00252621 Jy ! Component: 1150 - total flux cleaned = -0.00226426 Jy ! Component: 1200 - total flux cleaned = -0.0020903 Jy ! Component: 1250 - total flux cleaned = -0.00191756 Jy ! Component: 1300 - total flux cleaned = -0.00149488 Jy ! Component: 1350 - total flux cleaned = -0.00124352 Jy ! Component: 1400 - total flux cleaned = -0.000750327 Jy ! Component: 1450 - total flux cleaned = -0.000831206 Jy ! Component: 1500 - total flux cleaned = -0.000749666 Jy ! Component: 1550 - total flux cleaned = -3.36337e-05 Jy ! Component: 1600 - total flux cleaned = -3.41551e-05 Jy ! Component: 1650 - total flux cleaned = 0.00035385 Jy ! Component: 1700 - total flux cleaned = 0.000736184 Jy ! Component: 1750 - total flux cleaned = 0.00118864 Jy ! Component: 1800 - total flux cleaned = 0.00111325 Jy ! Component: 1850 - total flux cleaned = 0.00148302 Jy ! Component: 1900 - total flux cleaned = 0.00148331 Jy ! Component: 1950 - total flux cleaned = 0.00199 Jy ! Component: 2000 - total flux cleaned = 0.00227597 Jy ! Component: 2050 - total flux cleaned = 0.00220492 Jy ! Component: 2100 - total flux cleaned = 0.00220698 Jy ! Component: 2150 - total flux cleaned = 0.00248481 Jy ! Component: 2200 - total flux cleaned = 0.00289651 Jy ! Component: 2250 - total flux cleaned = 0.00255622 Jy ! Component: 2300 - total flux cleaned = 0.00309479 Jy ! Component: 2350 - total flux cleaned = 0.00342676 Jy ! Component: 2400 - total flux cleaned = 0.00342794 Jy ! Component: 2450 - total flux cleaned = 0.00368889 Jy ! Component: 2500 - total flux cleaned = 0.00368958 Jy ! Component: 2550 - total flux cleaned = 0.00400916 Jy ! Component: 2600 - total flux cleaned = 0.00407308 Jy ! Component: 2650 - total flux cleaned = 0.00438659 Jy ! Component: 2700 - total flux cleaned = 0.00469589 Jy ! Component: 2750 - total flux cleaned = 0.00481903 Jy ! Component: 2800 - total flux cleaned = 0.00500176 Jy ! Component: 2850 - total flux cleaned = 0.00500171 Jy ! Component: 2900 - total flux cleaned = 0.00518115 Jy ! Component: 2950 - total flux cleaned = 0.0055364 Jy ! Component: 3000 - total flux cleaned = 0.00571107 Jy ! Component: 3050 - total flux cleaned = 0.0055946 Jy ! Component: 3100 - total flux cleaned = 0.0058249 Jy ! Component: 3150 - total flux cleaned = 0.00565301 Jy ! Component: 3200 - total flux cleaned = 0.0058783 Jy ! Component: 3250 - total flux cleaned = 0.0062145 Jy ! Component: 3300 - total flux cleaned = 0.00582579 Jy ! Component: 3350 - total flux cleaned = 0.00615548 Jy ! Component: 3400 - total flux cleaned = 0.00626411 Jy ! Component: 3450 - total flux cleaned = 0.0062641 Jy ! Component: 3500 - total flux cleaned = 0.00642451 Jy ! Component: 3550 - total flux cleaned = 0.00642404 Jy ! Component: 3600 - total flux cleaned = 0.0062661 Jy ! Component: 3650 - total flux cleaned = 0.00678721 Jy ! Component: 3700 - total flux cleaned = 0.00668352 Jy ! Component: 3750 - total flux cleaned = 0.00699085 Jy ! Component: 3800 - total flux cleaned = 0.00709238 Jy ! Component: 3850 - total flux cleaned = 0.00724415 Jy ! Component: 3900 - total flux cleaned = 0.00744401 Jy ! Component: 3950 - total flux cleaned = 0.00749335 Jy ! Component: 4000 - total flux cleaned = 0.00764092 Jy ! Component: 4050 - total flux cleaned = 0.00764134 Jy ! Total flux subtracted in 4096 components = 0.00802865 Jy ! Clean residual min=-0.002434 max=0.002639 Jy/beam ! Clean residual mean=0.000003 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 3.27929 Jy keep ! Adding 347 model components to the UV plane model. ! The established model now contains 585 components and 3.27929 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0555+3948_X_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7998 x 1.679 at 9.524 degrees (North through East) ! Clean map min=-0.0096134 max=2.0252 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0555+3948_X_d_map.fits wmodel /image_prod/ug002_uva//J0555+3948_X_d_map.mod ! Writing 585 model components to file: /image_prod/ug002_uva//J0555+3948_X_d_map.mod wobs /image_prod/ug002_uva//J0555+3948_X_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0555+3948_X_d_uvs.fits wwins /image_prod/ug002_uva//J0555+3948_X_d_map.win ! wwins: Wrote 15 windows to /image_prod/ug002_uva//J0555+3948_X_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.0252 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000844214 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.125057 0.125057 0.250113 0.500226 1.00045 2.00091 4.00181 8.00362 16.0072 32.0145 64.029 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.025 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2398.91 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0555+3948_X_d_dfm.log closed on Wed Mar 4 21:04:30 2020