! Started logfile: /image_prod/ug002_uva//J0552-0727_S_b_dfm.log on Wed Mar  4 21:02:01 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0552-0727_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0552-0727_S_b_uva.fits
! AN table 1: 55 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.999134 visibilities/baseline/integration-bin.
! Found source: J0552-0727
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3462 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0552-0727_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.000042Jy  sigma=9.658100
! Fit after  self-cal, rms=0.963873Jy  sigma=9.304915
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.222 mas, bmaj=26.86 mas, bpa=-10.66 degrees
! Estimated noise=1.63932 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.028819 Jy
! Component: 100  -  total flux cleaned = 0.0357156 Jy
! Total flux subtracted in 100 components = 0.0357156 Jy
! Clean residual min=-0.004113 max=0.003395 Jy/beam
! Clean residual mean=-0.000009 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.0357156 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0357156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052231Jy  sigma=0.483427
! Fit after  self-cal, rms=0.050804Jy  sigma=0.469386
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.333 mas, bmaj=25.37 mas, bpa=-10.32 degrees
! Estimated noise=1.27845 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00464958 Jy
! Component: 100  -  total flux cleaned = 0.00609538 Jy
! Component: 150  -  total flux cleaned = 0.00671357 Jy
! Component: 200  -  total flux cleaned = 0.00693282 Jy
! Total flux subtracted in 200 components = 0.00693282 Jy
! Clean residual min=-0.002348 max=0.002168 Jy/beam
! Clean residual mean=-0.000006 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.0426484 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 46 components and 0.0426484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050412Jy  sigma=0.465217
! Fit after  self-cal, rms=0.050420Jy  sigma=0.465079
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.333 x 25.37 at -10.32 degrees (North through East)
! Clean map  min=-0.002499  max=0.039853 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.17     HN        1.06     KP        0.96     LA        0.89     
!   NL        0.92     OV        0.97     PT        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        0.97     KP        1.05     LA        0.88     
!   NL        0.92     OV        1.07     PT        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        1.16     KP        0.99     LA        0.87     
!   NL        1.00     OV        0.99     PT        1.04     
! 
! 
! Fit before self-cal, rms=0.050420Jy  sigma=0.465079
! Fit after  self-cal, rms=0.049631Jy  sigma=0.463373
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.446 mas, bmaj=25.69 mas, bpa=-10.42 degrees
! Estimated noise=1.26741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000199646 Jy
! Component: 100  -  total flux cleaned = 0.000267241 Jy
! Component: 150  -  total flux cleaned = 0.000253843 Jy
! Component: 200  -  total flux cleaned = 0.000229735 Jy
! Total flux subtracted in 200 components = 0.000229735 Jy
! Clean residual min=-0.002153 max=0.002275 Jy/beam
! Clean residual mean=-0.000007 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.0428782 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 93 components and 0.0428782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049620Jy  sigma=0.463260
! Fit after  self-cal, rms=0.049684Jy  sigma=0.462941
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049684Jy  sigma=0.462941
! Fit after  self-cal, rms=0.050045Jy  sigma=0.461723
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.413 mas, bmaj=25.85 mas, bpa=-10.51 degrees
! Estimated noise=1.27049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228237 Jy
! Component: 100  -  total flux cleaned = 8.76651e-05 Jy
! Component: 150  -  total flux cleaned = -6.27374e-06 Jy
! Component: 200  -  total flux cleaned = -6.5645e-05 Jy
! Total flux subtracted in 200 components = -6.5645e-05 Jy
! Clean residual min=-0.002014 max=0.002326 Jy/beam
! Clean residual mean=-0.000006 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.0428125 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 121 components and 0.0428126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050033Jy  sigma=0.461632
! Fit after  self-cal, rms=0.050096Jy  sigma=0.461491
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.53568e-05 Jy
! Component: 100  -  total flux cleaned = -1.34413e-05 Jy
! Component: 150  -  total flux cleaned = -1.35668e-05 Jy
! Component: 200  -  total flux cleaned = -2.30228e-05 Jy
! Total flux subtracted in 200 components = -2.30228e-05 Jy
! Clean residual min=-0.001984 max=0.002286 Jy/beam
! Clean residual mean=-0.000006 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.0427895 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 137 components and 0.0427895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050090Jy  sigma=0.461443
! Fit after  self-cal, rms=0.050092Jy  sigma=0.461435
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050092Jy  sigma=0.461435
! Fit after  self-cal, rms=0.050196Jy  sigma=0.461243
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.343 mas, bmaj=25.98 mas, bpa=-10.57 degrees
! Estimated noise=1.26538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.36249e-05 Jy
! Component: 100  -  total flux cleaned = -4.16326e-05 Jy
! Component: 150  -  total flux cleaned = -6.73914e-05 Jy
! Component: 200  -  total flux cleaned = -7.81346e-05 Jy
! Total flux subtracted in 200 components = -7.81346e-05 Jy
! Clean residual min=-0.001925 max=0.002318 Jy/beam
! Clean residual mean=-0.000006 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.0427114 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 152 components and 0.0427114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050185Jy  sigma=0.461185
! Fit after  self-cal, rms=0.050216Jy  sigma=0.461151
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.5844e-05 Jy
! Component: 100  -  total flux cleaned = -2.59998e-05 Jy
! Component: 150  -  total flux cleaned = -3.5209e-05 Jy
! Component: 200  -  total flux cleaned = -1.69303e-05 Jy
! Total flux subtracted in 200 components = -1.69303e-05 Jy
! Clean residual min=-0.001902 max=0.002289 Jy/beam
! Clean residual mean=-0.000006 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.0426945 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 164 components and 0.0426945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050210Jy  sigma=0.461126
! Fit after  self-cal, rms=0.050212Jy  sigma=0.461121
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050212Jy  sigma=0.461121
! Fit after  self-cal, rms=0.050107Jy  sigma=0.461091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.598 mas, bmaj=25.53 mas, bpa=-10.12 degrees
! Estimated noise=1.3012 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.46782e-05 Jy
! Component: 100  -  total flux cleaned = -1.04194e-05 Jy
! Component: 150  -  total flux cleaned = -3.73306e-05 Jy
! Component: 200  -  total flux cleaned = -5.52363e-05 Jy
! Total flux subtracted in 200 components = -5.52363e-05 Jy
! Clean residual min=-0.001713 max=0.002342 Jy/beam
! Clean residual mean=-0.000007 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.0426392 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 192 components and 0.0426392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050103Jy  sigma=0.461083
! Fit after  self-cal, rms=0.050110Jy  sigma=0.461076
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.86319e-05 Jy
! Component: 100  -  total flux cleaned = -1.84766e-05 Jy
! Component: 150  -  total flux cleaned = -3.16023e-06 Jy
! Component: 200  -  total flux cleaned = 6.6376e-06 Jy
! Total flux subtracted in 200 components = 6.6376e-06 Jy
! Clean residual min=-0.001726 max=0.002337 Jy/beam
! Clean residual mean=-0.000007 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.0426459 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 205 components and 0.0426458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050108Jy  sigma=0.461069
! Fit after  self-cal, rms=0.050111Jy  sigma=0.461067
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.294 mas, bmaj=26.08 mas, bpa=-10.6 degrees
! Estimated noise=1.26114 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.294 x 26.08 at -10.6 degrees (North through East)
! Clean map  min=-0.0018864  max=0.039189 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.162 mas, bmaj=27.71 mas, bpa=-10.88 degrees
! Estimated noise=1.60895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.029492 Jy
! Component: 100  -  total flux cleaned = 0.0373236 Jy
! Component: 150  -  total flux cleaned = 0.0406541 Jy
! Component: 200  -  total flux cleaned = 0.0411623 Jy
! Total flux subtracted in 200 components = 0.0411623 Jy
! Clean residual min=-0.003215 max=0.002754 Jy/beam
! Clean residual mean=-0.000006 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.0411623 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0411623 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.294 mas, bmaj=26.08 mas, bpa=-10.6 degrees
! Estimated noise=1.26114 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000589783 Jy
! Component: 100  -  total flux cleaned = 0.00069772 Jy
! Component: 150  -  total flux cleaned = 0.000787107 Jy
! Component: 200  -  total flux cleaned = 0.000884454 Jy
! Total flux subtracted in 200 components = 0.000884454 Jy
! Clean residual min=-0.002050 max=0.002157 Jy/beam
! Clean residual mean=-0.000006 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.0420468 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 51 components and 0.0420468 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.598 mas, bmaj=25.53 mas, bpa=-10.12 degrees
! Estimated noise=1.3012 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000425806 Jy
! Component: 100  -  total flux cleaned = 0.000498528 Jy
! Component: 150  -  total flux cleaned = 0.000489391 Jy
! Component: 200  -  total flux cleaned = 0.000464372 Jy
! Total flux subtracted in 200 components = 0.000464372 Jy
! Clean residual min=-0.001772 max=0.002356 Jy/beam
! Clean residual mean=-0.000007 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.0425112 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.47005e-05 Jy
! Component: 100  -  total flux cleaned = 1.24564e-05 Jy
! Component: 150  -  total flux cleaned = 3.19573e-05 Jy
! Component: 200  -  total flux cleaned = 5.71007e-05 Jy
! Total flux subtracted in 200 components = 5.71007e-05 Jy
! Clean residual min=-0.001752 max=0.002357 Jy/beam
! Clean residual mean=-0.000007 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.0425683 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 87 components and 0.0425683 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.294 mas, bmaj=26.08 mas, bpa=-10.6 degrees
! Estimated noise=1.26114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.85719e-05 Jy
! Component: 100  -  total flux cleaned = -1.85484e-05 Jy
! Component: 150  -  total flux cleaned = -1.82514e-05 Jy
! Component: 200  -  total flux cleaned = -5.75125e-06 Jy
! Total flux subtracted in 200 components = -5.75125e-06 Jy
! Clean residual min=-0.001904 max=0.002229 Jy/beam
! Clean residual mean=-0.000006 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.0425625 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 97 components and 0.0425625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050109Jy  sigma=0.461087
! Fit after  self-cal, rms=0.050112Jy  sigma=0.461077
wmodel J0552-0727_S_b_map.mod
! Writing 97 model components to file: J0552-0727_S_b_map.mod
wobs   J0552-0727_S_b_uvs.fits
! Writing UV FITS file: J0552-0727_S_b_uvs.fits
wwins  J0552-0727_S_b_map.win
! wwins: Wrote 1 windows to J0552-0727_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000742999 Jy
! Component: 100  -  total flux cleaned = 0.000777786 Jy
! Component: 150  -  total flux cleaned = 0.000778123 Jy
! Component: 200  -  total flux cleaned = 0.000778179 Jy
! Component: 250  -  total flux cleaned = 0.000804346 Jy
! Component: 300  -  total flux cleaned = 0.000803658 Jy
! Component: 350  -  total flux cleaned = 0.00068732 Jy
! Component: 400  -  total flux cleaned = 0.000599883 Jy
! Component: 450  -  total flux cleaned = 0.000558587 Jy
! Component: 500  -  total flux cleaned = 0.000478373 Jy
! Component: 550  -  total flux cleaned = 0.00042086 Jy
! Component: 600  -  total flux cleaned = 0.000347286 Jy
! Component: 650  -  total flux cleaned = 0.000329408 Jy
! Component: 700  -  total flux cleaned = 0.000261959 Jy
! Component: 750  -  total flux cleaned = 0.000229868 Jy
! Component: 800  -  total flux cleaned = 0.000213605 Jy
! Component: 850  -  total flux cleaned = 0.000183968 Jy
! Component: 900  -  total flux cleaned = 0.000240529 Jy
! Component: 950  -  total flux cleaned = 0.000309165 Jy
! Component: 1000  -  total flux cleaned = 0.000335783 Jy
! Component: 1050  -  total flux cleaned = 0.000401009 Jy
! Component: 1100  -  total flux cleaned = 0.000400809 Jy
! Component: 1150  -  total flux cleaned = 0.000450561 Jy
! Component: 1200  -  total flux cleaned = 0.000474622 Jy
! Component: 1250  -  total flux cleaned = 0.000486457 Jy
! Component: 1300  -  total flux cleaned = 0.000486586 Jy
! Component: 1350  -  total flux cleaned = 0.000520832 Jy
! Component: 1400  -  total flux cleaned = 0.000498486 Jy
! Component: 1450  -  total flux cleaned = 0.000520474 Jy
! Component: 1500  -  total flux cleaned = 0.000488459 Jy
! Component: 1550  -  total flux cleaned = 0.000499124 Jy
! Component: 1600  -  total flux cleaned = 0.000468023 Jy
! Component: 1650  -  total flux cleaned = 0.000468062 Jy
! Component: 1700  -  total flux cleaned = 0.000447895 Jy
! Component: 1750  -  total flux cleaned = 0.000437908 Jy
! Component: 1800  -  total flux cleaned = 0.000437779 Jy
! Component: 1850  -  total flux cleaned = 0.000428359 Jy
! Component: 1900  -  total flux cleaned = 0.00041912 Jy
! Component: 1950  -  total flux cleaned = 0.000400774 Jy
! Component: 2000  -  total flux cleaned = 0.000373625 Jy
! Component: 2050  -  total flux cleaned = 0.00032907 Jy
! Component: 2100  -  total flux cleaned = 0.000311565 Jy
! Component: 2150  -  total flux cleaned = 0.000302712 Jy
! Component: 2200  -  total flux cleaned = 0.000277023 Jy
! Component: 2250  -  total flux cleaned = 0.000260138 Jy
! Component: 2300  -  total flux cleaned = 0.000251766 Jy
! Component: 2350  -  total flux cleaned = 0.00024348 Jy
! Component: 2400  -  total flux cleaned = 0.000219115 Jy
! Component: 2450  -  total flux cleaned = 0.000195165 Jy
! Component: 2500  -  total flux cleaned = 0.000202985 Jy
! Component: 2550  -  total flux cleaned = 0.00017161 Jy
! Component: 2600  -  total flux cleaned = 0.000140846 Jy
! Component: 2650  -  total flux cleaned = 0.000140878 Jy
! Component: 2700  -  total flux cleaned = 0.000125769 Jy
! Component: 2750  -  total flux cleaned = 0.000103277 Jy
! Component: 2800  -  total flux cleaned = 8.09907e-05 Jy
! Component: 2850  -  total flux cleaned = 5.15093e-05 Jy
! Component: 2900  -  total flux cleaned = 4.41539e-05 Jy
! Component: 2950  -  total flux cleaned = 2.95813e-05 Jy
! Component: 3000  -  total flux cleaned = 7.9637e-06 Jy
! Component: 3050  -  total flux cleaned = -2.77595e-05 Jy
! Component: 3100  -  total flux cleaned = -5.60354e-05 Jy
! Component: 3150  -  total flux cleaned = -7.70983e-05 Jy
! Component: 3200  -  total flux cleaned = -9.10418e-05 Jy
! Component: 3250  -  total flux cleaned = -0.000125779 Jy
! Component: 3300  -  total flux cleaned = -0.00015336 Jy
! Component: 3350  -  total flux cleaned = -0.000167096 Jy
! Component: 3400  -  total flux cleaned = -0.000214761 Jy
! Component: 3450  -  total flux cleaned = -0.00022828 Jy
! Component: 3500  -  total flux cleaned = -0.000268616 Jy
! Component: 3550  -  total flux cleaned = -0.000295354 Jy
! Component: 3600  -  total flux cleaned = -0.000321889 Jy
! Component: 3650  -  total flux cleaned = -0.000348243 Jy
! Component: 3700  -  total flux cleaned = -0.000387638 Jy
! Component: 3750  -  total flux cleaned = -0.000407196 Jy
! Component: 3800  -  total flux cleaned = -0.000420193 Jy
! Component: 3850  -  total flux cleaned = -0.000452543 Jy
! Component: 3900  -  total flux cleaned = -0.000491136 Jy
! Component: 3950  -  total flux cleaned = -0.000523105 Jy
! Component: 4000  -  total flux cleaned = -0.000535864 Jy
! Component: 4050  -  total flux cleaned = -0.000561234 Jy
! Total flux subtracted in 4096 components = -0.000586406 Jy
! Clean residual min=-0.000324 max=0.000334 Jy/beam
! Clean residual mean=-0.000001 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.0419761 Jy
keep
! Adding 366 model components to the UV plane model.
! The established model now contains 463 components and 0.0419761 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0552-0727_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.294 x 26.08 at -10.6 degrees (North through East)
! Clean map  min=-0.0013809  max=0.038842 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0552-0727_S_b_map.fits
wmodel /image_prod/ug002_uva//J0552-0727_S_b_map.mod
! Writing 463 model components to file: /image_prod/ug002_uva//J0552-0727_S_b_map.mod
wobs   /image_prod/ug002_uva//J0552-0727_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0552-0727_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J0552-0727_S_b_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0552-0727_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0388419 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000128578 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.993092 0.993092 1.98618 3.97237 7.94474 15.8895 31.7789 63.5579
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.038 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  302.086 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0552-0727_S_b_dfm.log closed on Wed Mar  4 21:02:05 2020