! Started logfile: /image_prod/ug002_uva//J0542-0913_X_dfm.log on Wed Mar 4 20:58:28 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0542-0913_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0542-0913_X_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.906963 visibilities/baseline/integration-bin. ! Found source: J0542-0913 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 36732 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0542-0913_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.191287Jy sigma=7.966936 ! Fit after self-cal, rms=0.405538Jy sigma=2.845477 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6707 mas, bmaj=1.742 mas, bpa=-6.691 degrees ! Estimated noise=1.06192 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.427839 Jy ! Component: 100 - total flux cleaned = 0.561523 Jy ! Total flux subtracted in 100 components = 0.561523 Jy ! Clean residual min=-0.021627 max=0.063569 Jy/beam ! Clean residual mean=0.000068 rms=0.005167 Jy/beam ! Combined flux in latest and established models = 0.561523 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.561523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.166896Jy sigma=1.071231 ! Fit after self-cal, rms=0.166865Jy sigma=1.071097 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0745613 Jy ! Component: 100 - total flux cleaned = 0.119971 Jy ! Total flux subtracted in 100 components = 0.119971 Jy ! Clean residual min=-0.014395 max=0.023286 Jy/beam ! Clean residual mean=0.000037 rms=0.002868 Jy/beam ! Combined flux in latest and established models = 0.681494 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.681494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102330Jy sigma=0.654932 ! Fit after self-cal, rms=0.102295Jy sigma=0.654747 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0280526 Jy ! Component: 100 - total flux cleaned = 0.0456653 Jy ! Total flux subtracted in 100 components = 0.0456653 Jy ! Clean residual min=-0.012799 max=0.015117 Jy/beam ! Clean residual mean=0.000025 rms=0.002379 Jy/beam ! Combined flux in latest and established models = 0.72716 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 0.72716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088121Jy sigma=0.569245 ! Fit after self-cal, rms=0.088108Jy sigma=0.569190 ! Inverting map ! Added new window around map position (2.4, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150197 Jy ! Component: 100 - total flux cleaned = 0.0258066 Jy ! Total flux subtracted in 100 components = 0.0258066 Jy ! Clean residual min=-0.013039 max=0.013822 Jy/beam ! Clean residual mean=0.000020 rms=0.002196 Jy/beam ! Combined flux in latest and established models = 0.752966 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.752966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083691Jy sigma=0.542411 ! Fit after self-cal, rms=0.083521Jy sigma=0.541314 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8484 mas, bmaj=2.117 mas, bpa=-6.623 degrees ! Estimated noise=0.555171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167379 Jy ! Component: 100 - total flux cleaned = 0.0238129 Jy ! Component: 150 - total flux cleaned = 0.0290953 Jy ! Component: 200 - total flux cleaned = 0.0334174 Jy ! Total flux subtracted in 200 components = 0.0334174 Jy ! Clean residual min=-0.010473 max=0.010061 Jy/beam ! Clean residual mean=0.000014 rms=0.002344 Jy/beam ! Combined flux in latest and established models = 0.786384 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 69 components and 0.786384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077638Jy sigma=0.503162 ! Fit after self-cal, rms=0.077511Jy sigma=0.502340 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8484 x 2.117 at -6.623 degrees (North through East) ! Clean map min=-0.0099353 max=0.60444 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.01 KP 1.07 ! LA 1.03 MK 1.04 NL 1.08 OV 1.02 ! PT 0.90 SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.98 KP 1.05 ! LA 1.03 MK 1.02 NL 1.08 OV 1.01 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.99 KP 1.05 ! LA 1.00 MK 1.02 NL 1.08 OV 1.00 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 HN 1.02 KP 1.03 ! LA 1.03 MK 1.03 NL 1.04 OV 1.01 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.04 HN 0.97 KP 1.04 ! LA 1.00 MK 1.02 NL 1.06 OV 1.00 ! PT 0.91 SC 1.07 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.96 KP 1.04 ! LA 0.98 MK 0.99 NL 1.09 OV 1.01 ! PT 0.90 SC 1.07 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 0.95 KP 1.03 ! LA 0.99 MK 1.06 NL 1.10 OV 0.99 ! PT 0.88 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.97 KP 1.05 ! LA 1.01 MK 0.98 NL 1.07 OV 1.02 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 1.00 KP 1.01 ! LA 1.01 MK 0.97 NL 1.05 OV 0.98 ! PT 0.91 SC 1.07 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 0.98 KP 1.04 ! LA 0.99 MK 1.00 NL 1.07 OV 1.01 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 0.96 KP 1.04 ! LA 1.00 MK 0.98 NL 1.04 OV 0.99 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.97 HN 0.99 KP 1.06 ! LA 0.99 MK 1.02 NL 1.07 OV 1.01 ! PT 0.89 SC 1.01 ! ! ! Fit before self-cal, rms=0.077511Jy sigma=0.502340 ! Fit after self-cal, rms=0.060506Jy sigma=0.401068 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8544 mas, bmaj=2.13 mas, bpa=-6.777 degrees ! Estimated noise=0.554672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00658817 Jy ! Component: 100 - total flux cleaned = -0.00993682 Jy ! Component: 150 - total flux cleaned = -0.0109161 Jy ! Component: 200 - total flux cleaned = -0.0116376 Jy ! Total flux subtracted in 200 components = -0.0116376 Jy ! Clean residual min=-0.003586 max=0.003313 Jy/beam ! Clean residual mean=-0.000004 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.774746 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.774746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059630Jy sigma=0.395404 ! Fit after self-cal, rms=0.059615Jy sigma=0.395252 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059615Jy sigma=0.395252 ! Fit after self-cal, rms=0.059105Jy sigma=0.391731 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8548 mas, bmaj=2.134 mas, bpa=-6.717 degrees ! Estimated noise=0.554224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00425908 Jy ! Component: 100 - total flux cleaned = -0.00574073 Jy ! Component: 150 - total flux cleaned = -0.00686347 Jy ! Component: 200 - total flux cleaned = -0.00708085 Jy ! Total flux subtracted in 200 components = -0.00708085 Jy ! Clean residual min=-0.002565 max=0.002332 Jy/beam ! Clean residual mean=-0.000003 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.767665 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.767665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058675Jy sigma=0.388924 ! Fit after self-cal, rms=0.058669Jy sigma=0.388875 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.41907e-05 Jy ! Component: 100 - total flux cleaned = -0.000123786 Jy ! Component: 150 - total flux cleaned = -0.000233138 Jy ! Component: 200 - total flux cleaned = -0.000283716 Jy ! Total flux subtracted in 200 components = -0.000283716 Jy ! Clean residual min=-0.002447 max=0.002219 Jy/beam ! Clean residual mean=-0.000003 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.767381 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.767381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058568Jy sigma=0.388230 ! Fit after self-cal, rms=0.058566Jy sigma=0.388209 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058566Jy sigma=0.388209 ! Fit after self-cal, rms=0.058206Jy sigma=0.385766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=2.135 mas, bpa=-6.705 degrees ! Estimated noise=0.55405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226117 Jy ! Component: 100 - total flux cleaned = -0.00340614 Jy ! Component: 150 - total flux cleaned = -0.00380883 Jy ! Component: 200 - total flux cleaned = -0.00400751 Jy ! Total flux subtracted in 200 components = -0.00400751 Jy ! Clean residual min=-0.002236 max=0.001701 Jy/beam ! Clean residual mean=0.000002 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.763374 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.763374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058032Jy sigma=0.384658 ! Fit after self-cal, rms=0.058030Jy sigma=0.384645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154439 Jy ! Component: 100 - total flux cleaned = 0.000193383 Jy ! Component: 150 - total flux cleaned = 0.000155243 Jy ! Component: 200 - total flux cleaned = 0.000119861 Jy ! Total flux subtracted in 200 components = 0.000119861 Jy ! Clean residual min=-0.002164 max=0.001591 Jy/beam ! Clean residual mean=0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.763494 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 111 components and 0.763494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057984Jy sigma=0.384362 ! Fit after self-cal, rms=0.057984Jy sigma=0.384356 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057984Jy sigma=0.384356 ! Fit after self-cal, rms=0.057910Jy sigma=0.383966 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.112 mas, bmaj=3.783 mas, bpa=1.985 degrees ! Estimated noise=0.73361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00215065 Jy ! Component: 100 - total flux cleaned = -0.00332635 Jy ! Component: 150 - total flux cleaned = -0.00365236 Jy ! Component: 200 - total flux cleaned = -0.00367744 Jy ! Total flux subtracted in 200 components = -0.00367744 Jy ! Clean residual min=-0.001605 max=0.001659 Jy/beam ! Clean residual mean=0.000005 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.759816 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 129 components and 0.759816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057853Jy sigma=0.383633 ! Fit after self-cal, rms=0.057852Jy sigma=0.383625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.51619e-06 Jy ! Component: 100 - total flux cleaned = 3.33797e-05 Jy ! Component: 150 - total flux cleaned = 5.00611e-05 Jy ! Component: 200 - total flux cleaned = 4.96589e-05 Jy ! Total flux subtracted in 200 components = 4.96589e-05 Jy ! Clean residual min=-0.001626 max=0.001647 Jy/beam ! Clean residual mean=0.000005 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.759866 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 134 components and 0.759866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057843Jy sigma=0.383569 ! Fit after self-cal, rms=0.057843Jy sigma=0.383565 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8554 mas, bmaj=2.136 mas, bpa=-6.706 degrees ! Estimated noise=0.553907 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8554 x 2.136 at -6.706 degrees (North through East) ! Clean map min=-0.0020029 max=0.60426 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057843Jy sigma=0.383565 ! Fit after self-cal, rms=0.054506Jy sigma=0.356666 ! Inverting map and beam ! Estimated beam: bmin=0.8561 mas, bmaj=2.137 mas, bpa=-6.684 degrees ! Estimated noise=0.553988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107728 Jy ! Component: 100 - total flux cleaned = -0.00147867 Jy ! Component: 150 - total flux cleaned = -0.00158719 Jy ! Component: 200 - total flux cleaned = -0.00158707 Jy ! Total flux subtracted in 200 components = -0.00158707 Jy ! Clean residual min=-0.001713 max=0.001401 Jy/beam ! Clean residual mean=0.000002 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.758279 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 142 components and 0.758279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054437Jy sigma=0.356213 ! Fit after self-cal, rms=0.054436Jy sigma=0.356203 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101358 Jy ! Component: 100 - total flux cleaned = 0.000102108 Jy ! Component: 150 - total flux cleaned = 0.000101848 Jy ! Component: 200 - total flux cleaned = 5.30896e-05 Jy ! Total flux subtracted in 200 components = 5.30896e-05 Jy ! Clean residual min=-0.001564 max=0.001334 Jy/beam ! Clean residual mean=0.000002 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.758332 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 149 components and 0.758332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054412Jy sigma=0.356053 ! Fit after self-cal, rms=0.054412Jy sigma=0.356050 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054412Jy sigma=0.356050 ! Fit after self-cal, rms=0.054383Jy sigma=0.355905 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6754 mas, bmaj=1.753 mas, bpa=-6.73 degrees ! Estimated noise=1.07093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.43125 Jy ! Component: 100 - total flux cleaned = 0.562988 Jy ! Component: 150 - total flux cleaned = 0.635055 Jy ! Component: 200 - total flux cleaned = 0.678414 Jy ! Total flux subtracted in 200 components = 0.678414 Jy ! Clean residual min=-0.007627 max=0.022227 Jy/beam ! Clean residual mean=0.000023 rms=0.001854 Jy/beam ! Combined flux in latest and established models = 0.678414 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.678414 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8563 mas, bmaj=2.137 mas, bpa=-6.69 degrees ! Estimated noise=0.553859 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367521 Jy ! Component: 100 - total flux cleaned = 0.0544052 Jy ! Component: 150 - total flux cleaned = 0.0637625 Jy ! Component: 200 - total flux cleaned = 0.0695515 Jy ! Total flux subtracted in 200 components = 0.0695515 Jy ! Clean residual min=-0.002054 max=0.003112 Jy/beam ! Clean residual mean=0.000005 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.747965 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 45 components and 0.747965 Jy ! Inverting map ! Added new window around map position (1.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395392 Jy ! Component: 100 - total flux cleaned = 0.0066887 Jy ! Component: 150 - total flux cleaned = 0.00746118 Jy ! Component: 200 - total flux cleaned = 0.00796684 Jy ! Total flux subtracted in 200 components = 0.00796684 Jy ! Clean residual min=-0.001846 max=0.002073 Jy/beam ! Clean residual mean=0.000003 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.755932 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 61 components and 0.755932 Jy ! Inverting map ! Added new window around map position (-0.2, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015926 Jy ! Component: 100 - total flux cleaned = 0.00173693 Jy ! Component: 150 - total flux cleaned = 0.00187081 Jy ! Component: 200 - total flux cleaned = 0.00199611 Jy ! Total flux subtracted in 200 components = 0.00199611 Jy ! Clean residual min=-0.001560 max=0.001605 Jy/beam ! Clean residual mean=0.000002 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.757928 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 75 components and 0.757928 Jy ! Inverting map ! Added new window around map position (-3.2, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149271 Jy ! Component: 100 - total flux cleaned = 0.00184087 Jy ! Component: 150 - total flux cleaned = 0.00189398 Jy ! Component: 200 - total flux cleaned = 0.00194699 Jy ! Total flux subtracted in 200 components = 0.00194699 Jy ! Clean residual min=-0.001431 max=0.001529 Jy/beam ! Clean residual mean=0.000002 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.759875 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 90 components and 0.759875 Jy ! Inverting map ! Added new window around map position (3.4, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119118 Jy ! Component: 100 - total flux cleaned = 0.00133736 Jy ! Component: 150 - total flux cleaned = 0.00129083 Jy ! Component: 200 - total flux cleaned = 0.00124703 Jy ! Total flux subtracted in 200 components = 0.00124703 Jy ! Clean residual min=-0.001315 max=0.001404 Jy/beam ! Clean residual mean=0.000002 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.761122 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 104 components and 0.761122 Jy ! Inverting map ! Added new window around map position (1.6, 27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676144 Jy ! Component: 100 - total flux cleaned = 0.000846578 Jy ! Component: 150 - total flux cleaned = 0.000926182 Jy ! Component: 200 - total flux cleaned = 0.000887871 Jy ! Total flux subtracted in 200 components = 0.000887871 Jy ! Clean residual min=-0.001205 max=0.001272 Jy/beam ! Clean residual mean=0.000002 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.76201 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 116 components and 0.76201 Jy ! Inverting map ! Added new window around map position (5.8, 23.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313137 Jy ! Component: 100 - total flux cleaned = 0.000462469 Jy ! Component: 150 - total flux cleaned = 0.000569479 Jy ! Component: 200 - total flux cleaned = 0.000569729 Jy ! Total flux subtracted in 200 components = 0.000569729 Jy ! Clean residual min=-0.001125 max=0.001230 Jy/beam ! Clean residual mean=0.000002 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.76258 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 126 components and 0.76258 Jy ! Inverting map ! Added new window around map position (-1, -37.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000719251 Jy ! Component: 100 - total flux cleaned = 0.000856466 Jy ! Component: 150 - total flux cleaned = 0.000954276 Jy ! Component: 200 - total flux cleaned = 0.000954705 Jy ! Total flux subtracted in 200 components = 0.000954705 Jy ! Clean residual min=-0.001128 max=0.001102 Jy/beam ! Clean residual mean=0.000002 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.763534 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 144 components and 0.763535 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.114 mas, bmaj=3.783 mas, bpa=2.066 degrees ! Estimated noise=0.732689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225569 Jy ! Component: 100 - total flux cleaned = 0.000131558 Jy ! Component: 150 - total flux cleaned = 1.43708e-05 Jy ! Component: 200 - total flux cleaned = -0.00010999 Jy ! Total flux subtracted in 200 components = -0.00010999 Jy ! Clean residual min=-0.001183 max=0.001204 Jy/beam ! Clean residual mean=0.000003 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.763425 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159313 Jy ! Component: 100 - total flux cleaned = -0.000295199 Jy ! Component: 150 - total flux cleaned = -0.000410988 Jy ! Component: 200 - total flux cleaned = -0.000520572 Jy ! Total flux subtracted in 200 components = -0.000520572 Jy ! Clean residual min=-0.001172 max=0.001168 Jy/beam ! Clean residual mean=0.000003 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.762904 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 181 components and 0.762904 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8563 mas, bmaj=2.137 mas, bpa=-6.69 degrees ! Estimated noise=0.553859 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.03973e-05 Jy ! Component: 100 - total flux cleaned = 8.93379e-05 Jy ! Component: 150 - total flux cleaned = 6.00683e-05 Jy ! Component: 200 - total flux cleaned = 3.26043e-05 Jy ! Total flux subtracted in 200 components = 3.26043e-05 Jy ! Clean residual min=-0.001116 max=0.001017 Jy/beam ! Clean residual mean=0.000001 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.762937 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 196 components and 0.762936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054285Jy sigma=0.355252 ! Fit after self-cal, rms=0.054277Jy sigma=0.355198 wmodel J0542-0913_X_map.mod ! Writing 196 model components to file: J0542-0913_X_map.mod wobs J0542-0913_X_uvs.fits ! Writing UV FITS file: J0542-0913_X_uvs.fits wwins J0542-0913_X_map.win ! wwins: Wrote 10 windows to J0542-0913_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.12395e-05 Jy ! Component: 100 - total flux cleaned = -0.000191246 Jy ! Component: 150 - total flux cleaned = -0.000261748 Jy ! Component: 200 - total flux cleaned = -0.000295805 Jy ! Component: 250 - total flux cleaned = -0.000312835 Jy ! Component: 300 - total flux cleaned = -0.00034515 Jy ! Component: 350 - total flux cleaned = -0.000345207 Jy ! Component: 400 - total flux cleaned = -0.000314339 Jy ! Component: 450 - total flux cleaned = -0.000374958 Jy ! Component: 500 - total flux cleaned = -0.000389624 Jy ! Component: 550 - total flux cleaned = -0.00040443 Jy ! Component: 600 - total flux cleaned = -0.000404414 Jy ! Component: 650 - total flux cleaned = -0.000447246 Jy ! Component: 700 - total flux cleaned = -0.000404919 Jy ! Component: 750 - total flux cleaned = -0.000405104 Jy ! Component: 800 - total flux cleaned = -0.000391624 Jy ! Component: 850 - total flux cleaned = -0.000418726 Jy ! Component: 900 - total flux cleaned = -0.000351346 Jy ! Component: 950 - total flux cleaned = -0.000351489 Jy ! Component: 1000 - total flux cleaned = -0.000298703 Jy ! Component: 1050 - total flux cleaned = -0.000324988 Jy ! Component: 1100 - total flux cleaned = -0.000286248 Jy ! Component: 1150 - total flux cleaned = -0.000299099 Jy ! Component: 1200 - total flux cleaned = -0.000261038 Jy ! Component: 1250 - total flux cleaned = -0.000261411 Jy ! Component: 1300 - total flux cleaned = -0.000211856 Jy ! Component: 1350 - total flux cleaned = -0.000236393 Jy ! Component: 1400 - total flux cleaned = -0.000212072 Jy ! Component: 1450 - total flux cleaned = -0.000175868 Jy ! Component: 1500 - total flux cleaned = -0.000140065 Jy ! Component: 1550 - total flux cleaned = -0.000163819 Jy ! Component: 1600 - total flux cleaned = -0.000116606 Jy ! Component: 1650 - total flux cleaned = -4.66496e-05 Jy ! Component: 1700 - total flux cleaned = -2.36365e-05 Jy ! Component: 1750 - total flux cleaned = -7.94642e-07 Jy ! Component: 1800 - total flux cleaned = -2.3506e-05 Jy ! Component: 1850 - total flux cleaned = -8.90431e-07 Jy ! Component: 1900 - total flux cleaned = 1.04396e-05 Jy ! Component: 1950 - total flux cleaned = 2.16637e-05 Jy ! Component: 2000 - total flux cleaned = 9.89331e-05 Jy ! Component: 2050 - total flux cleaned = 9.89175e-05 Jy ! Component: 2100 - total flux cleaned = 0.000131617 Jy ! Component: 2150 - total flux cleaned = 0.000153306 Jy ! Component: 2200 - total flux cleaned = 0.000207072 Jy ! Component: 2250 - total flux cleaned = 0.000238996 Jy ! Component: 2300 - total flux cleaned = 0.00027068 Jy ! Component: 2350 - total flux cleaned = 0.000228646 Jy ! Component: 2400 - total flux cleaned = 0.000301738 Jy ! Component: 2450 - total flux cleaned = 0.000322379 Jy ! Component: 2500 - total flux cleaned = 0.000281089 Jy ! Component: 2550 - total flux cleaned = 0.000352524 Jy ! Component: 2600 - total flux cleaned = 0.000322099 Jy ! Component: 2650 - total flux cleaned = 0.000412827 Jy ! Component: 2700 - total flux cleaned = 0.000402874 Jy ! Component: 2750 - total flux cleaned = 0.000353097 Jy ! Component: 2800 - total flux cleaned = 0.000363152 Jy ! Component: 2850 - total flux cleaned = 0.000422066 Jy ! Component: 2900 - total flux cleaned = 0.000431668 Jy ! Component: 2950 - total flux cleaned = 0.000489863 Jy ! Component: 3000 - total flux cleaned = 0.000431996 Jy ! Component: 3050 - total flux cleaned = 0.000479862 Jy ! Component: 3100 - total flux cleaned = 0.0004609 Jy ! Component: 3150 - total flux cleaned = 0.000451446 Jy ! Component: 3200 - total flux cleaned = 0.000395051 Jy ! Component: 3250 - total flux cleaned = 0.000404514 Jy ! Component: 3300 - total flux cleaned = 0.00040456 Jy ! Component: 3350 - total flux cleaned = 0.000423027 Jy ! Component: 3400 - total flux cleaned = 0.000386237 Jy ! Component: 3450 - total flux cleaned = 0.000358856 Jy ! Component: 3500 - total flux cleaned = 0.000358878 Jy ! Component: 3550 - total flux cleaned = 0.000331652 Jy ! Component: 3600 - total flux cleaned = 0.000313687 Jy ! Component: 3650 - total flux cleaned = 0.000295823 Jy ! Component: 3700 - total flux cleaned = 0.000322442 Jy ! Component: 3750 - total flux cleaned = 0.00027818 Jy ! Component: 3800 - total flux cleaned = 0.000348467 Jy ! Component: 3850 - total flux cleaned = 0.000313458 Jy ! Component: 3900 - total flux cleaned = 0.000261265 Jy ! Component: 3950 - total flux cleaned = 0.000287187 Jy ! Component: 4000 - total flux cleaned = 0.000261357 Jy ! Component: 4050 - total flux cleaned = 0.000252813 Jy ! Total flux subtracted in 4096 components = 0.000201706 Jy ! Clean residual min=-0.000498 max=0.000473 Jy/beam ! Clean residual mean=0.000000 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.763138 Jy keep ! Adding 333 model components to the UV plane model. ! The established model now contains 528 components and 0.763139 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0542-0913_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8563 x 2.137 at -6.69 degrees (North through East) ! Clean map min=-0.0014708 max=0.60553 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0542-0913_X_map.fits wmodel /image_prod/ug002_uva//J0542-0913_X_map.mod ! Writing 528 model components to file: /image_prod/ug002_uva//J0542-0913_X_map.mod wobs /image_prod/ug002_uva//J0542-0913_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0542-0913_X_uvs.fits wwins /image_prod/ug002_uva//J0542-0913_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0542-0913_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.605534 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000149174 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0739052 0.0739052 0.14781 0.295621 0.591242 1.18248 2.36497 4.72994 9.45987 18.9197 37.8395 75.679 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.605 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4059.25 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0542-0913_X_dfm.log closed on Wed Mar 4 20:58:34 2020