! Started logfile: /image_prod/ug002_uva//J0533+4822_X_b_dfm.log on Wed Mar  4 20:54:26 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0533+4822_X_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0533+4822_X_b_uva.fits
! AN table 1: 16 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.713542 visibilities/baseline/integration-bin.
! Found source: J0533+4822
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 4932 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0533+4822_X_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.611835Jy  sigma=8.754208
! Fit after  self-cal, rms=0.277353Jy  sigma=1.508407
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6982 mas, bmaj=2.238 mas, bpa=9.953 degrees
! Estimated noise=3.27384 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.979158 Jy
! Component: 100  -  total flux cleaned = 1.19268 Jy
! Total flux subtracted in 100 components = 1.19268 Jy
! Clean residual min=-0.022469 max=0.059554 Jy/beam
! Clean residual mean=0.000001 rms=0.006451 Jy/beam
! Combined flux in latest and established models = 1.19268 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.19268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109481Jy  sigma=0.609113
! Fit after  self-cal, rms=0.109472Jy  sigma=0.609095
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0551864 Jy
! Component: 100  -  total flux cleaned = 0.0817242 Jy
! Total flux subtracted in 100 components = 0.0817242 Jy
! Clean residual min=-0.016715 max=0.024563 Jy/beam
! Clean residual mean=0.000001 rms=0.003961 Jy/beam
! Combined flux in latest and established models = 1.2744 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.2744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078251Jy  sigma=0.437915
! Fit after  self-cal, rms=0.078173Jy  sigma=0.437582
! Inverting map 
! Added new window around map position (10, 40.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191284 Jy
! Component: 100  -  total flux cleaned = 0.0247637 Jy
! Total flux subtracted in 100 components = 0.0247637 Jy
! Clean residual min=-0.014858 max=0.018113 Jy/beam
! Clean residual mean=0.000001 rms=0.003326 Jy/beam
! Combined flux in latest and established models = 1.29917 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 1.29917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075245Jy  sigma=0.416320
! Fit after  self-cal, rms=0.074956Jy  sigma=0.414388
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9054 mas, bmaj=2.322 mas, bpa=9.183 degrees
! Estimated noise=1.96196 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00213728 Jy
! Component: 100  -  total flux cleaned = -0.00241621 Jy
! Component: 150  -  total flux cleaned = -0.00265358 Jy
! Component: 200  -  total flux cleaned = -0.00286585 Jy
! Total flux subtracted in 200 components = -0.00286585 Jy
! Clean residual min=-0.013745 max=0.014279 Jy/beam
! Clean residual mean=0.000001 rms=0.002931 Jy/beam
! Combined flux in latest and established models = 1.2963 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 1.2963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073504Jy  sigma=0.406636
! Fit after  self-cal, rms=0.073449Jy  sigma=0.406295
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9054 x 2.322 at 9.183 degrees (North through East)
! Clean map  min=-0.012988  max=1.2614 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     KP        0.99     LA        1.02     
!   MK        1.04     NL        0.99     OV        1.02     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     KP        1.01     LA        1.03     
!   MK        1.03     NL        0.98     OV        1.00     PT        0.96     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     KP        1.01     LA        1.03     
!   MK        1.04     NL        1.00     OV        1.02     PT        0.96     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     KP        1.00     LA        1.04     
!   MK        1.05     NL        1.00     OV        1.02     PT        0.97     
!   SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     KP        1.00     LA        1.04     
!   MK        1.02     NL        0.95     OV        1.01     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     KP        1.01     LA        1.03     
!   MK        1.02     NL        0.97     OV        1.01     PT        0.98     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     KP        1.01     LA        1.04     
!   MK        1.05     NL        0.98     OV        1.01     PT        0.98     
!   SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     KP        1.00     LA        1.01     
!   MK        1.06     NL        1.01     OV        0.98     PT        0.99     
!   SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     KP        1.01     LA        1.01     
!   MK        1.06     NL        0.99     OV        0.99     PT        1.01     
!   SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     KP        1.00     LA        1.03     
!   MK        1.04     NL        0.95     OV        1.02     PT        0.98     
!   SC        0.93     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     KP        1.00     LA        1.00     
!   MK        1.04     NL        0.99     OV        0.99     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     KP        1.01     LA        1.02     
!   MK        1.01     NL        0.99     OV        1.01     PT        0.96     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.073449Jy  sigma=0.406295
! Fit after  self-cal, rms=0.059933Jy  sigma=0.332197
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9035 mas, bmaj=2.312 mas, bpa=9.247 degrees
! Estimated noise=1.95851 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187968 Jy
! Component: 100  -  total flux cleaned = 0.00351765 Jy
! Component: 150  -  total flux cleaned = 0.00414823 Jy
! Component: 200  -  total flux cleaned = 0.00429393 Jy
! Total flux subtracted in 200 components = 0.00429393 Jy
! Clean residual min=-0.006680 max=0.007112 Jy/beam
! Clean residual mean=0.000000 rms=0.001522 Jy/beam
! Combined flux in latest and established models = 1.30059 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 45 components and 1.30059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058473Jy  sigma=0.326663
! Fit after  self-cal, rms=0.058441Jy  sigma=0.326059
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058441Jy  sigma=0.326059
! Fit after  self-cal, rms=0.057432Jy  sigma=0.318255
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9033 mas, bmaj=2.31 mas, bpa=9.228 degrees
! Estimated noise=1.96001 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00297154 Jy
! Component: 100  -  total flux cleaned = 0.00373117 Jy
! Component: 150  -  total flux cleaned = 0.00415222 Jy
! Component: 200  -  total flux cleaned = 0.00442869 Jy
! Total flux subtracted in 200 components = 0.00442869 Jy
! Clean residual min=-0.004916 max=0.006004 Jy/beam
! Clean residual mean=-0.000000 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 1.30502 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 50 components and 1.30502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056899Jy  sigma=0.315474
! Fit after  self-cal, rms=0.056881Jy  sigma=0.315258
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00665543 Jy
! Component: 100  -  total flux cleaned = 0.0106771 Jy
! Component: 150  -  total flux cleaned = 0.0124752 Jy
! Component: 200  -  total flux cleaned = 0.0137024 Jy
! Total flux subtracted in 200 components = 0.0137024 Jy
! Clean residual min=-0.004162 max=0.004217 Jy/beam
! Clean residual mean=0.000001 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 1.31873 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 65 components and 1.31873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055899Jy  sigma=0.309939
! Fit after  self-cal, rms=0.055832Jy  sigma=0.309671
! Inverting map 
! Added new window around map position (4.4, 6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023416 Jy
! Component: 100  -  total flux cleaned = 0.00358055 Jy
! Component: 150  -  total flux cleaned = 0.00484102 Jy
! Component: 200  -  total flux cleaned = 0.00517806 Jy
! Total flux subtracted in 200 components = 0.00517806 Jy
! Clean residual min=-0.003609 max=0.003596 Jy/beam
! Clean residual mean=0.000001 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 1.3239 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 1.3239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055424Jy  sigma=0.307410
! Fit after  self-cal, rms=0.055407Jy  sigma=0.307339
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055407Jy  sigma=0.307339
! Fit after  self-cal, rms=0.055186Jy  sigma=0.306513
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9027 mas, bmaj=2.309 mas, bpa=9.218 degrees
! Estimated noise=1.96019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187515 Jy
! Component: 100  -  total flux cleaned = 0.00229108 Jy
! Component: 150  -  total flux cleaned = 0.00273948 Jy
! Component: 200  -  total flux cleaned = 0.00301759 Jy
! Total flux subtracted in 200 components = 0.00301759 Jy
! Clean residual min=-0.003263 max=0.003125 Jy/beam
! Clean residual mean=0.000001 rms=0.000688 Jy/beam
! Combined flux in latest and established models = 1.32692 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 85 components and 1.32692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054974Jy  sigma=0.305262
! Fit after  self-cal, rms=0.054971Jy  sigma=0.305220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000691908 Jy
! Component: 100  -  total flux cleaned = 0.00106994 Jy
! Component: 150  -  total flux cleaned = 0.00130816 Jy
! Component: 200  -  total flux cleaned = 0.00164159 Jy
! Total flux subtracted in 200 components = 0.00164159 Jy
! Clean residual min=-0.003044 max=0.002969 Jy/beam
! Clean residual mean=0.000001 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 1.32856 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 94 components and 1.32856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054863Jy  sigma=0.304584
! Fit after  self-cal, rms=0.054859Jy  sigma=0.304569
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054859Jy  sigma=0.304569
! Fit after  self-cal, rms=0.054806Jy  sigma=0.304454
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.068 mas, bmaj=2.641 mas, bpa=-1.136 degrees
! Estimated noise=2.56913 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127344 Jy
! Component: 100  -  total flux cleaned = 0.0015766 Jy
! Component: 150  -  total flux cleaned = 0.0017443 Jy
! Component: 200  -  total flux cleaned = 0.0019218 Jy
! Total flux subtracted in 200 components = 0.0019218 Jy
! Clean residual min=-0.002670 max=0.002687 Jy/beam
! Clean residual mean=0.000001 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 1.33048 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 117 components and 1.33048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054772Jy  sigma=0.304220
! Fit after  self-cal, rms=0.054767Jy  sigma=0.304184
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000465339 Jy
! Component: 100  -  total flux cleaned = 0.000587064 Jy
! Component: 150  -  total flux cleaned = 0.000752532 Jy
! Component: 200  -  total flux cleaned = 0.000852854 Jy
! Total flux subtracted in 200 components = 0.000852854 Jy
! Clean residual min=-0.002534 max=0.002739 Jy/beam
! Clean residual mean=0.000001 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 1.33134 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 135 components and 1.33134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054755Jy  sigma=0.304068
! Fit after  self-cal, rms=0.054751Jy  sigma=0.304062
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9024 mas, bmaj=2.309 mas, bpa=9.219 degrees
! Estimated noise=1.96009 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9024 x 2.309 at 9.219 degrees (North through East)
! Clean map  min=-0.0030136  max=1.2632 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054751Jy  sigma=0.304062
! Fit after  self-cal, rms=0.051102Jy  sigma=0.265593
! Inverting map and beam 
! Estimated beam: bmin=0.9024 mas, bmaj=2.308 mas, bpa=9.218 degrees
! Estimated noise=1.96033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000587425 Jy
! Component: 100  -  total flux cleaned = 0.00115116 Jy
! Component: 150  -  total flux cleaned = 0.00155869 Jy
! Component: 200  -  total flux cleaned = 0.00170111 Jy
! Total flux subtracted in 200 components = 0.00170111 Jy
! Clean residual min=-0.002515 max=0.002798 Jy/beam
! Clean residual mean=0.000000 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 1.33304 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 143 components and 1.33304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051000Jy  sigma=0.265032
! Fit after  self-cal, rms=0.050999Jy  sigma=0.265023
! Inverting map 
! Added new window around map position (-11, -30.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167331 Jy
! Component: 100  -  total flux cleaned = 0.00200542 Jy
! Component: 150  -  total flux cleaned = 0.0022479 Jy
! Component: 200  -  total flux cleaned = 0.00237855 Jy
! Total flux subtracted in 200 components = 0.00237855 Jy
! Clean residual min=-0.002297 max=0.002245 Jy/beam
! Clean residual mean=0.000001 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 1.33542 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 158 components and 1.33542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050863Jy  sigma=0.264204
! Fit after  self-cal, rms=0.050851Jy  sigma=0.264169
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050851Jy  sigma=0.264169
! Fit after  self-cal, rms=0.050834Jy  sigma=0.264101
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6975 mas, bmaj=2.225 mas, bpa=9.998 degrees
! Estimated noise=3.25895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.974668 Jy
! Component: 100  -  total flux cleaned = 1.18726 Jy
! Component: 150  -  total flux cleaned = 1.24436 Jy
! Component: 200  -  total flux cleaned = 1.2719 Jy
! Total flux subtracted in 200 components = 1.2719 Jy
! Clean residual min=-0.008844 max=0.013358 Jy/beam
! Clean residual mean=-0.000001 rms=0.002254 Jy/beam
! Combined flux in latest and established models = 1.2719 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 1.2719 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9021 mas, bmaj=2.308 mas, bpa=9.221 degrees
! Estimated noise=1.96042 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.01799 Jy
! Component: 100  -  total flux cleaned = 0.0293266 Jy
! Component: 150  -  total flux cleaned = 0.0377957 Jy
! Component: 200  -  total flux cleaned = 0.0444964 Jy
! Total flux subtracted in 200 components = 0.0444964 Jy
! Clean residual min=-0.004555 max=0.005552 Jy/beam
! Clean residual mean=-0.000001 rms=0.001083 Jy/beam
! Combined flux in latest and established models = 1.3164 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 29 components and 1.3164 Jy
! Inverting map 
! Added new window around map position (-12.4, -26.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00565727 Jy
! Component: 100  -  total flux cleaned = 0.00936228 Jy
! Component: 150  -  total flux cleaned = 0.0117218 Jy
! Component: 200  -  total flux cleaned = 0.0137938 Jy
! Total flux subtracted in 200 components = 0.0137938 Jy
! Clean residual min=-0.003391 max=0.003597 Jy/beam
! Clean residual mean=-0.000000 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 1.33019 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 45 components and 1.33019 Jy
! Inverting map 
! Added new window around map position (-7.2, -47.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00254635 Jy
! Component: 100  -  total flux cleaned = 0.0033424 Jy
! Component: 150  -  total flux cleaned = 0.00396675 Jy
! Component: 200  -  total flux cleaned = 0.00454793 Jy
! Total flux subtracted in 200 components = 0.00454793 Jy
! Clean residual min=-0.002822 max=0.002995 Jy/beam
! Clean residual mean=-0.000000 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 1.33474 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 65 components and 1.33474 Jy
! Inverting map 
! Added new window around map position (8.2, 15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162025 Jy
! Component: 100  -  total flux cleaned = 0.00292488 Jy
! Component: 150  -  total flux cleaned = 0.00372204 Jy
! Component: 200  -  total flux cleaned = 0.00424448 Jy
! Total flux subtracted in 200 components = 0.00424448 Jy
! Clean residual min=-0.002506 max=0.002599 Jy/beam
! Clean residual mean=0.000000 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 1.33898 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 82 components and 1.33898 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.068 mas, bmaj=2.64 mas, bpa=-1.16 degrees
! Estimated noise=2.57082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000666595 Jy
! Component: 100  -  total flux cleaned = 0.000443982 Jy
! Component: 150  -  total flux cleaned = 0.000347597 Jy
! Component: 200  -  total flux cleaned = 0.000308676 Jy
! Total flux subtracted in 200 components = 0.000308676 Jy
! Clean residual min=-0.002356 max=0.002515 Jy/beam
! Clean residual mean=0.000000 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 1.33929 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124185 Jy
! Component: 100  -  total flux cleaned = 0.00108163 Jy
! Component: 150  -  total flux cleaned = 0.0012482 Jy
! Component: 200  -  total flux cleaned = 0.00128565 Jy
! Total flux subtracted in 200 components = 0.00128565 Jy
! Clean residual min=-0.001816 max=0.001842 Jy/beam
! Clean residual mean=0.000000 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 1.34058 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 141 components and 1.34058 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9021 mas, bmaj=2.308 mas, bpa=9.221 degrees
! Estimated noise=1.96042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000102465 Jy
! Component: 100  -  total flux cleaned = -4.00371e-05 Jy
! Component: 150  -  total flux cleaned = 0.000152039 Jy
! Component: 200  -  total flux cleaned = 0.000568387 Jy
! Total flux subtracted in 200 components = 0.000568387 Jy
! Clean residual min=-0.001950 max=0.001969 Jy/beam
! Clean residual mean=0.000000 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 1.34115 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 164 components and 1.34115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050815Jy  sigma=0.264174
! Fit after  self-cal, rms=0.050732Jy  sigma=0.263806
wmodel J0533+4822_X_b_map.mod
! Writing 164 model components to file: J0533+4822_X_b_map.mod
wobs   J0533+4822_X_b_uvs.fits
! Writing UV FITS file: J0533+4822_X_b_uvs.fits
wwins  J0533+4822_X_b_map.win
! wwins: Wrote 9 windows to J0533+4822_X_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173597 Jy
! Component: 100  -  total flux cleaned = -0.000337541 Jy
! Component: 150  -  total flux cleaned = -0.000431766 Jy
! Component: 200  -  total flux cleaned = -0.000522813 Jy
! Component: 250  -  total flux cleaned = -0.000639863 Jy
! Component: 300  -  total flux cleaned = -0.000753076 Jy
! Component: 350  -  total flux cleaned = -0.000835744 Jy
! Component: 400  -  total flux cleaned = -0.000916514 Jy
! Component: 450  -  total flux cleaned = -0.000863866 Jy
! Component: 500  -  total flux cleaned = -0.000787206 Jy
! Component: 550  -  total flux cleaned = -0.000712066 Jy
! Component: 600  -  total flux cleaned = -0.000687402 Jy
! Component: 650  -  total flux cleaned = -0.000686965 Jy
! Component: 700  -  total flux cleaned = -0.000757426 Jy
! Component: 750  -  total flux cleaned = -0.000710379 Jy
! Component: 800  -  total flux cleaned = -0.000732969 Jy
! Component: 850  -  total flux cleaned = -0.000620829 Jy
! Component: 900  -  total flux cleaned = -0.000620783 Jy
! Component: 950  -  total flux cleaned = -0.00062065 Jy
! Component: 1000  -  total flux cleaned = -0.000535028 Jy
! Component: 1050  -  total flux cleaned = -0.000577322 Jy
! Component: 1100  -  total flux cleaned = -0.000535625 Jy
! Component: 1150  -  total flux cleaned = -0.000617268 Jy
! Component: 1200  -  total flux cleaned = -0.000637296 Jy
! Component: 1250  -  total flux cleaned = -0.00061717 Jy
! Component: 1300  -  total flux cleaned = -0.000676399 Jy
! Component: 1350  -  total flux cleaned = -0.000618024 Jy
! Component: 1400  -  total flux cleaned = -0.000636976 Jy
! Component: 1450  -  total flux cleaned = -0.000655897 Jy
! Component: 1500  -  total flux cleaned = -0.000712087 Jy
! Component: 1550  -  total flux cleaned = -0.000693997 Jy
! Component: 1600  -  total flux cleaned = -0.000766634 Jy
! Component: 1650  -  total flux cleaned = -0.000820292 Jy
! Component: 1700  -  total flux cleaned = -0.000819972 Jy
! Component: 1750  -  total flux cleaned = -0.000802236 Jy
! Component: 1800  -  total flux cleaned = -0.000837023 Jy
! Component: 1850  -  total flux cleaned = -0.00081961 Jy
! Component: 1900  -  total flux cleaned = -0.000819468 Jy
! Component: 1950  -  total flux cleaned = -0.000785849 Jy
! Component: 2000  -  total flux cleaned = -0.000835782 Jy
! Component: 2050  -  total flux cleaned = -0.000868595 Jy
! Component: 2100  -  total flux cleaned = -0.000803373 Jy
! Component: 2150  -  total flux cleaned = -0.000706633 Jy
! Component: 2200  -  total flux cleaned = -0.000738476 Jy
! Component: 2250  -  total flux cleaned = -0.000691066 Jy
! Component: 2300  -  total flux cleaned = -0.000675582 Jy
! Component: 2350  -  total flux cleaned = -0.0006756 Jy
! Component: 2400  -  total flux cleaned = -0.000706535 Jy
! Component: 2450  -  total flux cleaned = -0.000736888 Jy
! Component: 2500  -  total flux cleaned = -0.000766916 Jy
! Component: 2550  -  total flux cleaned = -0.000736827 Jy
! Component: 2600  -  total flux cleaned = -0.000840775 Jy
! Component: 2650  -  total flux cleaned = -0.00081122 Jy
! Component: 2700  -  total flux cleaned = -0.000869473 Jy
! Component: 2750  -  total flux cleaned = -0.000869579 Jy
! Component: 2800  -  total flux cleaned = -0.000855364 Jy
! Component: 2850  -  total flux cleaned = -0.000969119 Jy
! Component: 2900  -  total flux cleaned = -0.00098311 Jy
! Component: 2950  -  total flux cleaned = -0.000954938 Jy
! Component: 3000  -  total flux cleaned = -0.0010104 Jy
! Component: 3050  -  total flux cleaned = -0.0010516 Jy
! Component: 3100  -  total flux cleaned = -0.00105167 Jy
! Component: 3150  -  total flux cleaned = -0.00107896 Jy
! Component: 3200  -  total flux cleaned = -0.0011194 Jy
! Component: 3250  -  total flux cleaned = -0.00114609 Jy
! Component: 3300  -  total flux cleaned = -0.00118593 Jy
! Component: 3350  -  total flux cleaned = -0.00119923 Jy
! Component: 3400  -  total flux cleaned = -0.00119948 Jy
! Component: 3450  -  total flux cleaned = -0.00123852 Jy
! Component: 3500  -  total flux cleaned = -0.00130285 Jy
! Component: 3550  -  total flux cleaned = -0.00135397 Jy
! Component: 3600  -  total flux cleaned = -0.00139184 Jy
! Component: 3650  -  total flux cleaned = -0.00140433 Jy
! Component: 3700  -  total flux cleaned = -0.00140429 Jy
! Component: 3750  -  total flux cleaned = -0.00142903 Jy
! Component: 3800  -  total flux cleaned = -0.00140431 Jy
! Component: 3850  -  total flux cleaned = -0.00142891 Jy
! Component: 3900  -  total flux cleaned = -0.001429 Jy
! Component: 3950  -  total flux cleaned = -0.00150139 Jy
! Component: 4000  -  total flux cleaned = -0.00150135 Jy
! Component: 4050  -  total flux cleaned = -0.0015609 Jy
! Total flux subtracted in 4096 components = -0.00153718 Jy
! Clean residual min=-0.000805 max=0.000744 Jy/beam
! Clean residual mean=0.000000 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 1.33961 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 448 components and 1.33961 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0533+4822_X_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9021 x 2.308 at 9.221 degrees (North through East)
! Clean map  min=-0.0016915  max=1.2624 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0533+4822_X_b_map.fits
wmodel /image_prod/ug002_uva//J0533+4822_X_b_map.mod
! Writing 448 model components to file: /image_prod/ug002_uva//J0533+4822_X_b_map.mod
wobs   /image_prod/ug002_uva//J0533+4822_X_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0533+4822_X_b_uvs.fits
wwins  /image_prod/ug002_uva//J0533+4822_X_b_map.win
! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0533+4822_X_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.26239 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000199371 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0473793 0.0473793 0.0947585 0.189517 0.379034 0.758068 1.51614 3.03227 6.06455 12.1291 24.2582 48.5164 97.0328
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.262 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  6331.88 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0533+4822_X_b_dfm.log closed on Wed Mar  4 20:54:30 2020