! Started logfile: /image_prod/ug002_uva//J0532+0732_X_dfm.log on Wed Mar 4 20:53:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0532+0732_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0532+0732_X_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.911793 visibilities/baseline/integration-bin. ! Found source: J0532+0732 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 44904 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0532+0732_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.266948Jy sigma=8.690398 ! Fit after self-cal, rms=0.760926Jy sigma=6.426261 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6326 mas, bmaj=1.579 mas, bpa=0.1006 degrees ! Estimated noise=0.798055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209738 Jy ! Component: 100 - total flux cleaned = 0.340831 Jy ! Total flux subtracted in 100 components = 0.340831 Jy ! Clean residual min=-0.033756 max=0.105804 Jy/beam ! Clean residual mean=-0.000143 rms=0.010747 Jy/beam ! Combined flux in latest and established models = 0.340831 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.340831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.589911Jy sigma=2.828082 ! Fit after self-cal, rms=0.589455Jy sigma=2.823257 ! Inverting map ! Added new window around map position (0.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114529 Jy ! Component: 100 - total flux cleaned = 0.206484 Jy ! Total flux subtracted in 100 components = 0.206484 Jy ! Clean residual min=-0.031280 max=0.092000 Jy/beam ! Clean residual mean=-0.000119 rms=0.008630 Jy/beam ! Combined flux in latest and established models = 0.547315 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 45 components and 0.547315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.488647Jy sigma=2.316732 ! Fit after self-cal, rms=0.487369Jy sigma=2.306318 ! Inverting map ! Added new window around map position (-1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0920878 Jy ! Component: 100 - total flux cleaned = 0.166726 Jy ! Total flux subtracted in 100 components = 0.166726 Jy ! Clean residual min=-0.022807 max=0.046222 Jy/beam ! Clean residual mean=-0.000099 rms=0.006879 Jy/beam ! Combined flux in latest and established models = 0.714041 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 62 components and 0.714041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.409134Jy sigma=1.916567 ! Fit after self-cal, rms=0.409009Jy sigma=1.915329 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.065463 Jy ! Component: 100 - total flux cleaned = 0.123447 Jy ! Total flux subtracted in 100 components = 0.123447 Jy ! Clean residual min=-0.020408 max=0.036427 Jy/beam ! Clean residual mean=-0.000085 rms=0.005865 Jy/beam ! Combined flux in latest and established models = 0.837489 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.837488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.353239Jy sigma=1.652856 ! Fit after self-cal, rms=0.353192Jy sigma=1.652459 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520387 Jy ! Component: 100 - total flux cleaned = 0.0990357 Jy ! Total flux subtracted in 100 components = 0.0990357 Jy ! Clean residual min=-0.018296 max=0.030649 Jy/beam ! Clean residual mean=-0.000074 rms=0.005142 Jy/beam ! Combined flux in latest and established models = 0.936524 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 99 components and 0.936524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.310147Jy sigma=1.456244 ! Fit after self-cal, rms=0.310098Jy sigma=1.455860 ! Inverting map ! Added new window around map position (0.6, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432455 Jy ! Component: 100 - total flux cleaned = 0.0829512 Jy ! Total flux subtracted in 100 components = 0.0829512 Jy ! Clean residual min=-0.016564 max=0.026890 Jy/beam ! Clean residual mean=-0.000065 rms=0.004563 Jy/beam ! Combined flux in latest and established models = 1.01948 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 115 components and 1.01948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.275544Jy sigma=1.300920 ! Fit after self-cal, rms=0.275497Jy sigma=1.300468 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7384 mas, bmaj=1.769 mas, bpa=-0.148 degrees ! Estimated noise=0.448686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0927924 Jy ! Component: 100 - total flux cleaned = 0.168237 Jy ! Component: 150 - total flux cleaned = 0.231498 Jy ! Component: 200 - total flux cleaned = 0.285127 Jy ! Total flux subtracted in 200 components = 0.285127 Jy ! Clean residual min=-0.020743 max=0.043343 Jy/beam ! Clean residual mean=-0.000064 rms=0.006150 Jy/beam ! Combined flux in latest and established models = 1.3046 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 143 components and 1.3046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165367Jy sigma=0.845927 ! Fit after self-cal, rms=0.164878Jy sigma=0.839500 ! Inverting map ! Added new window around map position (0, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0494676 Jy ! Component: 100 - total flux cleaned = 0.0899336 Jy ! Component: 150 - total flux cleaned = 0.12448 Jy ! Component: 200 - total flux cleaned = 0.15416 Jy ! Total flux subtracted in 200 components = 0.15416 Jy ! Clean residual min=-0.012906 max=0.025341 Jy/beam ! Clean residual mean=-0.000032 rms=0.003919 Jy/beam ! Combined flux in latest and established models = 1.45876 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 166 components and 1.45876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114953Jy sigma=0.639510 ! Fit after self-cal, rms=0.114698Jy sigma=0.637376 ! Inverting map ! Added new window around map position (-0.4, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275821 Jy ! Component: 100 - total flux cleaned = 0.0500193 Jy ! Component: 150 - total flux cleaned = 0.0692882 Jy ! Component: 200 - total flux cleaned = 0.0859355 Jy ! Total flux subtracted in 200 components = 0.0859355 Jy ! Clean residual min=-0.010791 max=0.015558 Jy/beam ! Clean residual mean=-0.000014 rms=0.002954 Jy/beam ! Combined flux in latest and established models = 1.5447 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 205 components and 1.5447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093174Jy sigma=0.563102 ! Fit after self-cal, rms=0.092986Jy sigma=0.560463 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7384 x 1.769 at -0.148 degrees (North through East) ! Clean map min=-0.010324 max=0.36571 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 1.19 KP 1.01 ! LA 1.01 MK 1.40 OV 0.97 PT 0.91 ! SC 1.28 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.04 HN 1.15 KP 0.99 ! LA 1.01 MK 1.33 OV 0.98 PT 0.91 ! SC 1.30 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.05 HN 1.14 KP 1.01 ! LA 1.01 MK 1.30 OV 0.98 PT 0.91 ! SC 1.23 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 1.12 KP 1.00 ! LA 1.01 MK 1.31 OV 0.98 PT 0.90 ! SC 1.19 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.08 KP 0.98 ! LA 1.02 MK 1.22 OV 0.96 PT 0.85 ! SC 1.18 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.04 KP 1.00 ! LA 1.02 MK 1.21 OV 0.95 PT 0.91 ! SC 1.09 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.01 KP 1.00 ! LA 1.00 MK 1.13 OV 0.95 PT 0.90 ! SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 0.98 KP 1.00 ! LA 1.00 MK 1.09 OV 0.95 PT 0.90 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.94 KP 0.98 ! LA 1.01 MK 1.02 OV 0.96 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.93 KP 0.98 ! LA 1.00 MK 1.03 OV 0.96 PT 0.91 ! SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.91 KP 0.97 ! LA 1.00 MK 1.02 OV 0.94 PT 0.90 ! SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.90 KP 0.99 ! LA 0.99 MK 0.98 OV 0.95 PT 0.89 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.092986Jy sigma=0.560463 ! Fit after self-cal, rms=0.065656Jy sigma=0.459309 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7592 mas, bmaj=1.801 mas, bpa=0.2284 degrees ! Estimated noise=0.472391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101079 Jy ! Component: 100 - total flux cleaned = 0.0164169 Jy ! Component: 150 - total flux cleaned = 0.0195219 Jy ! Component: 200 - total flux cleaned = 0.0218179 Jy ! Total flux subtracted in 200 components = 0.0218179 Jy ! Clean residual min=-0.006108 max=0.007930 Jy/beam ! Clean residual mean=-0.000009 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 1.56652 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 233 components and 1.56652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063164Jy sigma=0.446421 ! Fit after self-cal, rms=0.063006Jy sigma=0.445030 ! Inverting map ! Added new window around map position (-0.6, 8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637782 Jy ! Component: 100 - total flux cleaned = 0.00844378 Jy ! Component: 150 - total flux cleaned = 0.0104976 Jy ! Component: 200 - total flux cleaned = 0.0128689 Jy ! Total flux subtracted in 200 components = 0.0128689 Jy ! Clean residual min=-0.005299 max=0.006474 Jy/beam ! Clean residual mean=-0.000010 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 1.57938 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 249 components and 1.57938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061277Jy sigma=0.434769 ! Fit after self-cal, rms=0.061220Jy sigma=0.434185 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061220Jy sigma=0.434185 ! Fit after self-cal, rms=0.059262Jy sigma=0.426046 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7549 mas, bmaj=1.779 mas, bpa=0.1646 degrees ! Estimated noise=0.464693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459185 Jy ! Component: 100 - total flux cleaned = 0.00822092 Jy ! Component: 150 - total flux cleaned = 0.0113748 Jy ! Component: 200 - total flux cleaned = 0.0137622 Jy ! Total flux subtracted in 200 components = 0.0137622 Jy ! Clean residual min=-0.004340 max=0.005764 Jy/beam ! Clean residual mean=-0.000008 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 1.59315 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 267 components and 1.59315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058498Jy sigma=0.422336 ! Fit after self-cal, rms=0.058473Jy sigma=0.422073 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043148 Jy ! Component: 100 - total flux cleaned = 0.00531736 Jy ! Component: 150 - total flux cleaned = 0.00632947 Jy ! Component: 200 - total flux cleaned = 0.00725905 Jy ! Total flux subtracted in 200 components = 0.00725905 Jy ! Clean residual min=-0.003873 max=0.004386 Jy/beam ! Clean residual mean=-0.000005 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 1.60041 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 286 components and 1.60041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057773Jy sigma=0.417126 ! Fit after self-cal, rms=0.057707Jy sigma=0.416752 ! Inverting map ! Added new window around map position (1.2, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487476 Jy ! Component: 100 - total flux cleaned = 0.00745604 Jy ! Component: 150 - total flux cleaned = 0.00887484 Jy ! Component: 200 - total flux cleaned = 0.0101457 Jy ! Total flux subtracted in 200 components = 0.0101457 Jy ! Clean residual min=-0.003438 max=0.003097 Jy/beam ! Clean residual mean=-0.000006 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 1.61055 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 310 components and 1.61055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057033Jy sigma=0.413002 ! Fit after self-cal, rms=0.056971Jy sigma=0.412740 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056971Jy sigma=0.412740 ! Fit after self-cal, rms=0.056872Jy sigma=0.411685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.757 mas, bmaj=1.772 mas, bpa=0.7609 degrees ! Estimated noise=0.464374 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315524 Jy ! Component: 100 - total flux cleaned = 0.0054546 Jy ! Component: 150 - total flux cleaned = 0.00670927 Jy ! Component: 200 - total flux cleaned = 0.00770901 Jy ! Total flux subtracted in 200 components = 0.00770901 Jy ! Clean residual min=-0.003203 max=0.002649 Jy/beam ! Clean residual mean=-0.000006 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 1.61826 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 333 components and 1.61826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056520Jy sigma=0.409625 ! Fit after self-cal, rms=0.056503Jy sigma=0.409532 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124521 Jy ! Component: 100 - total flux cleaned = 0.00185359 Jy ! Component: 150 - total flux cleaned = 0.00271033 Jy ! Component: 200 - total flux cleaned = 0.00352021 Jy ! Total flux subtracted in 200 components = 0.00352021 Jy ! Clean residual min=-0.002984 max=0.002476 Jy/beam ! Clean residual mean=-0.000006 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 1.62178 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 344 components and 1.62178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056314Jy sigma=0.408335 ! Fit after self-cal, rms=0.056302Jy sigma=0.408280 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056302Jy sigma=0.408280 ! Fit after self-cal, rms=0.056365Jy sigma=0.408099 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.849 mas, bmaj=2.585 mas, bpa=8.192 degrees ! Estimated noise=0.813435 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312476 Jy ! Component: 100 - total flux cleaned = 0.00520637 Jy ! Component: 150 - total flux cleaned = 0.00677703 Jy ! Component: 200 - total flux cleaned = 0.00836969 Jy ! Total flux subtracted in 200 components = 0.00836969 Jy ! Clean residual min=-0.004103 max=0.004864 Jy/beam ! Clean residual mean=-0.000016 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 1.63015 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 362 components and 1.63015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056176Jy sigma=0.407451 ! Fit after self-cal, rms=0.056154Jy sigma=0.407347 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 45.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456928 Jy ! Component: 100 - total flux cleaned = 0.00733288 Jy ! Component: 150 - total flux cleaned = 0.0092662 Jy ! Component: 200 - total flux cleaned = 0.0103364 Jy ! Total flux subtracted in 200 components = 0.0103364 Jy ! Clean residual min=-0.003720 max=0.003672 Jy/beam ! Clean residual mean=-0.000014 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 1.64049 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 395 components and 1.64049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055922Jy sigma=0.406575 ! Fit after self-cal, rms=0.055896Jy sigma=0.406453 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7579 mas, bmaj=1.772 mas, bpa=0.9311 degrees ! Estimated noise=0.46498 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7579 x 1.772 at 0.9311 degrees (North through East) ! Clean map min=-0.002675 max=0.36451 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6464 mas, bmaj=1.565 mas, bpa=1.273 degrees ! Estimated noise=0.833879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.21781 Jy ! Component: 100 - total flux cleaned = 0.362035 Jy ! Component: 150 - total flux cleaned = 0.477103 Jy ! Component: 200 - total flux cleaned = 0.574138 Jy ! Total flux subtracted in 200 components = 0.574138 Jy ! Clean residual min=-0.027606 max=0.059897 Jy/beam ! Clean residual mean=-0.000121 rms=0.008246 Jy/beam ! Combined flux in latest and established models = 0.574138 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.574138 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7579 mas, bmaj=1.772 mas, bpa=0.9311 degrees ! Estimated noise=0.46498 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185075 Jy ! Component: 100 - total flux cleaned = 0.324974 Jy ! Component: 150 - total flux cleaned = 0.434079 Jy ! Component: 200 - total flux cleaned = 0.521789 Jy ! Total flux subtracted in 200 components = 0.521789 Jy ! Clean residual min=-0.022928 max=0.052883 Jy/beam ! Clean residual mean=-0.000119 rms=0.008585 Jy/beam ! Combined flux in latest and established models = 1.09593 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 121 components and 1.09593 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0723593 Jy ! Component: 100 - total flux cleaned = 0.132926 Jy ! Component: 150 - total flux cleaned = 0.183992 Jy ! Component: 200 - total flux cleaned = 0.22718 Jy ! Total flux subtracted in 200 components = 0.22718 Jy ! Clean residual min=-0.013861 max=0.026475 Jy/beam ! Clean residual mean=-0.000067 rms=0.004601 Jy/beam ! Combined flux in latest and established models = 1.32311 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 160 components and 1.32311 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036618 Jy ! Component: 100 - total flux cleaned = 0.067743 Jy ! Component: 150 - total flux cleaned = 0.0943142 Jy ! Component: 200 - total flux cleaned = 0.117111 Jy ! Total flux subtracted in 200 components = 0.117111 Jy ! Clean residual min=-0.009392 max=0.014028 Jy/beam ! Clean residual mean=-0.000040 rms=0.002692 Jy/beam ! Combined flux in latest and established models = 1.44022 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 195 components and 1.44022 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196319 Jy ! Component: 100 - total flux cleaned = 0.0365976 Jy ! Component: 150 - total flux cleaned = 0.051287 Jy ! Component: 200 - total flux cleaned = 0.0640448 Jy ! Total flux subtracted in 200 components = 0.0640448 Jy ! Clean residual min=-0.007024 max=0.007952 Jy/beam ! Clean residual mean=-0.000025 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 1.50426 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 227 components and 1.50426 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111117 Jy ! Component: 100 - total flux cleaned = 0.0208424 Jy ! Component: 150 - total flux cleaned = 0.0290802 Jy ! Component: 200 - total flux cleaned = 0.0360741 Jy ! Total flux subtracted in 200 components = 0.0360741 Jy ! Clean residual min=-0.005237 max=0.005304 Jy/beam ! Clean residual mean=-0.000016 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 1.54034 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 263 components and 1.54034 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.849 mas, bmaj=2.585 mas, bpa=8.192 degrees ! Estimated noise=0.813435 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182112 Jy ! Component: 100 - total flux cleaned = 0.0297763 Jy ! Component: 150 - total flux cleaned = 0.0395905 Jy ! Component: 200 - total flux cleaned = 0.0482534 Jy ! Total flux subtracted in 200 components = 0.0482534 Jy ! Clean residual min=-0.008371 max=0.006747 Jy/beam ! Clean residual mean=-0.000029 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 1.58859 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719207 Jy ! Component: 100 - total flux cleaned = 0.0132291 Jy ! Component: 150 - total flux cleaned = 0.0181047 Jy ! Component: 200 - total flux cleaned = 0.0224495 Jy ! Total flux subtracted in 200 components = 0.0224495 Jy ! Clean residual min=-0.006556 max=0.005030 Jy/beam ! Clean residual mean=-0.000023 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 1.61104 Jy ! Adding 145 model components to the UV plane model. ! The established model now contains 364 components and 1.61104 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7579 mas, bmaj=1.772 mas, bpa=0.9311 degrees ! Estimated noise=0.46498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366717 Jy ! Component: 100 - total flux cleaned = 0.0062127 Jy ! Component: 150 - total flux cleaned = 0.00851674 Jy ! Component: 200 - total flux cleaned = 0.0103583 Jy ! Total flux subtracted in 200 components = 0.0103583 Jy ! Clean residual min=-0.002683 max=0.002555 Jy/beam ! Clean residual mean=-0.000005 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 1.6214 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 386 components and 1.6214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056217Jy sigma=0.408087 ! Fit after self-cal, rms=0.056084Jy sigma=0.406573 wmodel J0532+0732_X_map.mod ! Writing 386 model components to file: J0532+0732_X_map.mod wobs J0532+0732_X_uvs.fits ! Writing UV FITS file: J0532+0732_X_uvs.fits wwins J0532+0732_X_map.win ! wwins: Wrote 11 windows to J0532+0732_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104068 Jy ! Component: 100 - total flux cleaned = -0.00129794 Jy ! Component: 150 - total flux cleaned = -0.00142023 Jy ! Component: 200 - total flux cleaned = -0.00130255 Jy ! Component: 250 - total flux cleaned = -0.0012655 Jy ! Component: 300 - total flux cleaned = -0.00130146 Jy ! Component: 350 - total flux cleaned = -0.00140862 Jy ! Component: 400 - total flux cleaned = -0.00147726 Jy ! Component: 450 - total flux cleaned = -0.00157848 Jy ! Component: 500 - total flux cleaned = -0.00164583 Jy ! Component: 550 - total flux cleaned = -0.00177597 Jy ! Component: 600 - total flux cleaned = -0.00183952 Jy ! Component: 650 - total flux cleaned = -0.00180901 Jy ! Component: 700 - total flux cleaned = -0.00184012 Jy ! Component: 750 - total flux cleaned = -0.00187024 Jy ! Component: 800 - total flux cleaned = -0.00175208 Jy ! Component: 850 - total flux cleaned = -0.00175239 Jy ! Component: 900 - total flux cleaned = -0.00172459 Jy ! Component: 950 - total flux cleaned = -0.00172489 Jy ! Component: 1000 - total flux cleaned = -0.00166982 Jy ! Component: 1050 - total flux cleaned = -0.00177812 Jy ! Component: 1100 - total flux cleaned = -0.00164434 Jy ! Component: 1150 - total flux cleaned = -0.00161763 Jy ! Component: 1200 - total flux cleaned = -0.00153975 Jy ! Component: 1250 - total flux cleaned = -0.00161647 Jy ! Component: 1300 - total flux cleaned = -0.00161605 Jy ! Component: 1350 - total flux cleaned = -0.00164065 Jy ! Component: 1400 - total flux cleaned = -0.0015422 Jy ! Component: 1450 - total flux cleaned = -0.00149397 Jy ! Component: 1500 - total flux cleaned = -0.00154182 Jy ! Component: 1550 - total flux cleaned = -0.00147111 Jy ! Component: 1600 - total flux cleaned = -0.00147099 Jy ! Component: 1650 - total flux cleaned = -0.00147103 Jy ! Component: 1700 - total flux cleaned = -0.00142561 Jy ! Component: 1750 - total flux cleaned = -0.00126884 Jy ! Component: 1800 - total flux cleaned = -0.00129117 Jy ! Component: 1850 - total flux cleaned = -0.00115956 Jy ! Component: 1900 - total flux cleaned = -0.00107287 Jy ! Component: 1950 - total flux cleaned = -0.000987333 Jy ! Component: 2000 - total flux cleaned = -0.000903043 Jy ! Component: 2050 - total flux cleaned = -0.000798831 Jy ! Component: 2100 - total flux cleaned = -0.000654301 Jy ! Component: 2150 - total flux cleaned = -0.000572462 Jy ! Component: 2200 - total flux cleaned = -0.000531873 Jy ! Component: 2250 - total flux cleaned = -0.000371777 Jy ! Component: 2300 - total flux cleaned = -0.000352021 Jy ! Component: 2350 - total flux cleaned = -0.000273607 Jy ! Component: 2400 - total flux cleaned = -0.000196213 Jy ! Component: 2450 - total flux cleaned = -0.000176996 Jy ! Component: 2500 - total flux cleaned = -0.000119832 Jy ! Component: 2550 - total flux cleaned = -0.000100826 Jy ! Component: 2600 - total flux cleaned = -6.3341e-05 Jy ! Component: 2650 - total flux cleaned = 2.92415e-05 Jy ! Component: 2700 - total flux cleaned = 8.40993e-05 Jy ! Component: 2750 - total flux cleaned = 6.60032e-05 Jy ! Component: 2800 - total flux cleaned = 0.000227778 Jy ! Component: 2850 - total flux cleaned = 0.000210047 Jy ! Component: 2900 - total flux cleaned = 0.000368826 Jy ! Component: 2950 - total flux cleaned = 0.000421063 Jy ! Component: 3000 - total flux cleaned = 0.000473083 Jy ! Component: 3050 - total flux cleaned = 0.000576155 Jy ! Component: 3100 - total flux cleaned = 0.000593325 Jy ! Component: 3150 - total flux cleaned = 0.000677986 Jy ! Component: 3200 - total flux cleaned = 0.000728239 Jy ! Component: 3250 - total flux cleaned = 0.000761258 Jy ! Component: 3300 - total flux cleaned = 0.000843685 Jy ! Component: 3350 - total flux cleaned = 0.000876269 Jy ! Component: 3400 - total flux cleaned = 0.000876439 Jy ! Component: 3450 - total flux cleaned = 0.000940688 Jy ! Component: 3500 - total flux cleaned = 0.000956834 Jy ! Component: 3550 - total flux cleaned = 0.00100434 Jy ! Component: 3600 - total flux cleaned = 0.00106705 Jy ! Component: 3650 - total flux cleaned = 0.0010514 Jy ! Component: 3700 - total flux cleaned = 0.00111332 Jy ! Component: 3750 - total flux cleaned = 0.00117472 Jy ! Component: 3800 - total flux cleaned = 0.00123544 Jy ! Component: 3850 - total flux cleaned = 0.00126546 Jy ! Component: 3900 - total flux cleaned = 0.00129531 Jy ! Component: 3950 - total flux cleaned = 0.001325 Jy ! Component: 4000 - total flux cleaned = 0.00136912 Jy ! Component: 4050 - total flux cleaned = 0.00142758 Jy ! Total flux subtracted in 4096 components = 0.00148561 Jy ! Clean residual min=-0.000946 max=0.000774 Jy/beam ! Clean residual mean=-0.000003 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 1.62288 Jy keep ! Adding 370 model components to the UV plane model. ! The established model now contains 755 components and 1.62288 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0532+0732_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7579 x 1.772 at 0.9311 degrees (North through East) ! Clean map min=-0.0020677 max=0.37038 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0532+0732_X_map.fits wmodel /image_prod/ug002_uva//J0532+0732_X_map.mod ! Writing 755 model components to file: /image_prod/ug002_uva//J0532+0732_X_map.mod wobs /image_prod/ug002_uva//J0532+0732_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0532+0732_X_uvs.fits wwins /image_prod/ug002_uva//J0532+0732_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J0532+0732_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.370377 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000264801 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.214485 0.214485 0.42897 0.857939 1.71588 3.43176 6.86352 13.727 27.4541 54.9081 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.37 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1398.7 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0532+0732_X_dfm.log closed on Wed Mar 4 20:53:40 2020