! Started logfile: /image_prod/ug002_uva//J0532+0732_S_dfm.log on Wed Mar  4 20:53:28 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0532+0732_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0532+0732_S_uva.fits
! AN table 1: 114 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.844737 visibilities/baseline/integration-bin.
! Found source: J0532+0732
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2889 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0532+0732_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.146691Jy  sigma=9.746996
! Fit after  self-cal, rms=0.764576Jy  sigma=7.528731
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.51 mas, bmaj=36.09 mas, bpa=25.32 degrees
! Estimated noise=1.67302 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.229229 Jy
! Component: 100  -  total flux cleaned = 0.369719 Jy
! Total flux subtracted in 100 components = 0.369719 Jy
! Clean residual min=-0.064316 max=0.080748 Jy/beam
! Clean residual mean=0.000318 rms=0.024993 Jy/beam
! Combined flux in latest and established models = 0.369719 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 45 components and 0.369719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.435936Jy  sigma=2.313420
! Fit after  self-cal, rms=0.435498Jy  sigma=2.308759
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.73 mas, bmaj=33.93 mas, bpa=24.8 degrees
! Estimated noise=1.45749 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150723 Jy
! Component: 100  -  total flux cleaned = 0.213958 Jy
! Component: 150  -  total flux cleaned = 0.236097 Jy
! Component: 200  -  total flux cleaned = 0.229911 Jy
! Total flux subtracted in 200 components = 0.229911 Jy
! Clean residual min=-0.048601 max=0.048985 Jy/beam
! Clean residual mean=0.000416 rms=0.024714 Jy/beam
! Combined flux in latest and established models = 0.59963 Jy
! Performing phase self-cal
! Adding 140 model components to the UV plane model.
! The established model now contains 182 components and 0.59963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.271621Jy  sigma=1.403133
! Fit after  self-cal, rms=0.271361Jy  sigma=1.401846
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.73 x 33.93 at 24.8 degrees (North through East)
! Clean map  min=-0.069318  max=0.36158 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.53     KP        1.32     LA        0.88     OV        1.82     
!   PT        0.60     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.38     KP        1.21     LA        0.86     OV        1.54     
!   PT        0.62     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.33     KP        1.22     LA        0.84     OV        1.36     
!   PT        0.61     
! 
! 
! Fit before self-cal, rms=0.271361Jy  sigma=1.401846
! Fit after  self-cal, rms=0.097127Jy  sigma=0.657058
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.54 mas, bmaj=33.92 mas, bpa=23.38 degrees
! Estimated noise=1.64146 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0281362 Jy
! Component: 100  -  total flux cleaned = -0.0315952 Jy
! Component: 150  -  total flux cleaned = -0.0307824 Jy
! Component: 200  -  total flux cleaned = -0.0301236 Jy
! Total flux subtracted in 200 components = -0.0301236 Jy
! Clean residual min=-0.010258 max=0.010255 Jy/beam
! Clean residual mean=-0.000005 rms=0.004819 Jy/beam
! Combined flux in latest and established models = 0.569506 Jy
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 265 components and 0.569506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072191Jy  sigma=0.461922
! Fit after  self-cal, rms=0.072104Jy  sigma=0.459954
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072104Jy  sigma=0.459954
! Fit after  self-cal, rms=0.062812Jy  sigma=0.435065
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.2 mas, bmaj=34.26 mas, bpa=23.26 degrees
! Estimated noise=1.57413 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267584 Jy
! Component: 100  -  total flux cleaned = 0.00225288 Jy
! Component: 150  -  total flux cleaned = 0.00195966 Jy
! Component: 200  -  total flux cleaned = 0.00320167 Jy
! Total flux subtracted in 200 components = 0.00320167 Jy
! Clean residual min=-0.003685 max=0.003726 Jy/beam
! Clean residual mean=-0.000001 rms=0.001911 Jy/beam
! Combined flux in latest and established models = 0.572708 Jy
selfcal
! Performing phase self-cal
! Adding 103 model components to the UV plane model.
! The established model now contains 364 components and 0.572708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058402Jy  sigma=0.399603
! Fit after  self-cal, rms=0.058210Jy  sigma=0.399287
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167261 Jy
! Component: 100  -  total flux cleaned = 0.00329851 Jy
! Component: 150  -  total flux cleaned = 0.00364224 Jy
! Component: 200  -  total flux cleaned = 0.00406735 Jy
! Total flux subtracted in 200 components = 0.00406735 Jy
! Clean residual min=-0.002217 max=0.002216 Jy/beam
! Clean residual mean=-0.000001 rms=0.001277 Jy/beam
! Combined flux in latest and established models = 0.576775 Jy
! Performing phase self-cal
! Adding 128 model components to the UV plane model.
! The established model now contains 481 components and 0.576775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057079Jy  sigma=0.392042
! Fit after  self-cal, rms=0.057023Jy  sigma=0.391970
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057023Jy  sigma=0.391970
! Fit after  self-cal, rms=0.056144Jy  sigma=0.389458
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.18 mas, bmaj=34.27 mas, bpa=23.31 degrees
! Estimated noise=1.56422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362003 Jy
! Component: 100  -  total flux cleaned = 0.00577349 Jy
! Component: 150  -  total flux cleaned = 0.0065726 Jy
! Component: 200  -  total flux cleaned = 0.0071063 Jy
! Total flux subtracted in 200 components = 0.0071063 Jy
! Clean residual min=-0.001172 max=0.001171 Jy/beam
! Clean residual mean=0.000002 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.583881 Jy
selfcal
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 571 components and 0.583881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055735Jy  sigma=0.386341
! Fit after  self-cal, rms=0.055703Jy  sigma=0.386322
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000347151 Jy
! Component: 100  -  total flux cleaned = 0.000702318 Jy
! Component: 150  -  total flux cleaned = 0.00125011 Jy
! Component: 200  -  total flux cleaned = 0.00180223 Jy
! Total flux subtracted in 200 components = 0.00180223 Jy
! Clean residual min=-0.000802 max=0.000806 Jy/beam
! Clean residual mean=0.000000 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.585683 Jy
! Performing phase self-cal
! Adding 96 model components to the UV plane model.
! The established model now contains 658 components and 0.585683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055567Jy  sigma=0.385487
! Fit after  self-cal, rms=0.055561Jy  sigma=0.385477
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055561Jy  sigma=0.385477
! Fit after  self-cal, rms=0.055618Jy  sigma=0.385155
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.84 mas, bmaj=33.91 mas, bpa=23.52 degrees
! Estimated noise=1.55739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140552 Jy
! Component: 100  -  total flux cleaned = 0.00219415 Jy
! Component: 150  -  total flux cleaned = 0.00263404 Jy
! Component: 200  -  total flux cleaned = 0.00302766 Jy
! Total flux subtracted in 200 components = 0.00302766 Jy
! Clean residual min=-0.000515 max=0.000517 Jy/beam
! Clean residual mean=0.000000 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.588711 Jy
selfcal
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 752 components and 0.588711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055544Jy  sigma=0.384675
! Fit after  self-cal, rms=0.055540Jy  sigma=0.384669
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000281549 Jy
! Component: 100  -  total flux cleaned = 0.000590373 Jy
! Component: 150  -  total flux cleaned = 0.000824835 Jy
! Component: 200  -  total flux cleaned = 0.00111529 Jy
! Total flux subtracted in 200 components = 0.00111529 Jy
! Clean residual min=-0.000394 max=0.000392 Jy/beam
! Clean residual mean=-0.000001 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.589826 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 825 components and 0.589826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055506Jy  sigma=0.384478
! Fit after  self-cal, rms=0.055507Jy  sigma=0.384475
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=14.2 mas, bmaj=34.24 mas, bpa=23.34 degrees
! Estimated noise=1.56571 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.2 x 34.24 at 23.34 degrees (North through East)
! Clean map  min=-0.025866  max=0.34084 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.73 mas, bmaj=35.72 mas, bpa=24.1 degrees
! Estimated noise=1.89698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.246698 Jy
! Component: 100  -  total flux cleaned = 0.379654 Jy
! Component: 150  -  total flux cleaned = 0.470222 Jy
! Component: 200  -  total flux cleaned = 0.53407 Jy
! Total flux subtracted in 200 components = 0.53407 Jy
! Clean residual min=-0.036083 max=0.035718 Jy/beam
! Clean residual mean=0.000134 rms=0.014013 Jy/beam
! Combined flux in latest and established models = 0.53407 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 74 model components to the UV plane model.
! The established model now contains 74 components and 0.53407 Jy
! Inverting map and beam 
! Estimated beam: bmin=14.2 mas, bmaj=34.24 mas, bpa=23.34 degrees
! Estimated noise=1.56571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0412179 Jy
! Component: 100  -  total flux cleaned = 0.0593029 Jy
! Component: 150  -  total flux cleaned = 0.0660079 Jy
! Component: 200  -  total flux cleaned = 0.0662435 Jy
! Total flux subtracted in 200 components = 0.0662435 Jy
! Clean residual min=-0.019621 max=0.019789 Jy/beam
! Clean residual mean=0.000182 rms=0.009388 Jy/beam
! Combined flux in latest and established models = 0.600314 Jy
! Adding 143 model components to the UV plane model.
! The established model now contains 215 components and 0.600314 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.84 mas, bmaj=33.91 mas, bpa=23.52 degrees
! Estimated noise=1.55739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119772 Jy
! Component: 100  -  total flux cleaned = -0.00118808 Jy
! Component: 150  -  total flux cleaned = -0.00204604 Jy
! Component: 200  -  total flux cleaned = -0.00266085 Jy
! Total flux subtracted in 200 components = -0.00266085 Jy
! Clean residual min=-0.010003 max=0.010084 Jy/beam
! Clean residual mean=0.000076 rms=0.004857 Jy/beam
! Combined flux in latest and established models = 0.597653 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164399 Jy
! Component: 100  -  total flux cleaned = 0.000741431 Jy
! Component: 150  -  total flux cleaned = 0.00119109 Jy
! Component: 200  -  total flux cleaned = 0.000899947 Jy
! Total flux subtracted in 200 components = 0.000899947 Jy
! Clean residual min=-0.005039 max=0.005052 Jy/beam
! Clean residual mean=0.000025 rms=0.002473 Jy/beam
! Combined flux in latest and established models = 0.598553 Jy
! Adding 211 model components to the UV plane model.
! The established model now contains 417 components and 0.598553 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=14.2 mas, bmaj=34.24 mas, bpa=23.34 degrees
! Estimated noise=1.56571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00164736 Jy
! Component: 100  -  total flux cleaned = -0.00165047 Jy
! Component: 150  -  total flux cleaned = -0.00142843 Jy
! Component: 200  -  total flux cleaned = -0.00141462 Jy
! Total flux subtracted in 200 components = -0.00141462 Jy
! Clean residual min=-0.002651 max=0.002649 Jy/beam
! Clean residual mean=0.000004 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 0.597138 Jy
selfcal
! Performing phase self-cal
! Adding 119 model components to the UV plane model.
! The established model now contains 527 components and 0.597138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056516Jy  sigma=0.393260
! Fit after  self-cal, rms=0.056471Jy  sigma=0.393092
wmodel J0532+0732_S_map.mod
! Writing 527 model components to file: J0532+0732_S_map.mod
wobs   J0532+0732_S_uvs.fits
! Writing UV FITS file: J0532+0732_S_uvs.fits
wwins  J0532+0732_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /image_prod/ug002_uva//J0532+0732_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.2 x 34.24 at 23.34 degrees (North through East)
! Clean map  min=-0.028691  max=0.31925 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0532+0732_S_map.fits
wmodel /image_prod/ug002_uva//J0532+0732_S_map.mod
! Writing 527 model components to file: /image_prod/ug002_uva//J0532+0732_S_map.mod
wobs   /image_prod/ug002_uva//J0532+0732_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0532+0732_S_uvs.fits
wwins  /image_prod/ug002_uva//J0532+0732_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.319252 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00132183 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.24212 1.24212 2.48424 4.96849 9.93698 19.874 39.7479 79.4958
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0039 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.319 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  241.522 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0532+0732_S_dfm.log closed on Wed Mar  4 20:53:31 2020