! Started logfile: /image_prod/ug002_uva//J0525-2338_S_dfm.log on Wed Mar  4 20:50:28 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0525-2338_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0525-2338_S_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.967222 visibilities/baseline/integration-bin.
! Found source: J0525-2338
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5223 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0525-2338_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.224419Jy  sigma=7.210975
! Fit after  self-cal, rms=0.416521Jy  sigma=2.425637
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.576 mas, bmaj=6.966 mas, bpa=-6.393 degrees
! Estimated noise=2.32998 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.479082 Jy
! Component: 100  -  total flux cleaned = 0.605605 Jy
! Total flux subtracted in 100 components = 0.605605 Jy
! Clean residual min=-0.040540 max=0.049632 Jy/beam
! Clean residual mean=0.000047 rms=0.009529 Jy/beam
! Combined flux in latest and established models = 0.605605 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.605605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.187581Jy  sigma=0.978283
! Fit after  self-cal, rms=0.187406Jy  sigma=0.976867
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.053 mas, bmaj=7.996 mas, bpa=-5.831 degrees
! Estimated noise=1.71493 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0514467 Jy
! Component: 100  -  total flux cleaned = 0.0740703 Jy
! Component: 150  -  total flux cleaned = 0.0863608 Jy
! Component: 200  -  total flux cleaned = 0.0922301 Jy
! Total flux subtracted in 200 components = 0.0922301 Jy
! Clean residual min=-0.036144 max=0.029785 Jy/beam
! Clean residual mean=0.000095 rms=0.007792 Jy/beam
! Combined flux in latest and established models = 0.697835 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 24 components and 0.697835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.173331Jy  sigma=0.892759
! Fit after  self-cal, rms=0.173261Jy  sigma=0.892221
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.053 x 7.996 at -5.831 degrees (North through East)
! Clean map  min=-0.035087  max=0.59945 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        1.06     HN        1.18     KP        1.05     
!   LA        1.06     MK        1.02     NL        1.03     OV        0.65     
!   PT        1.06     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.04     HN        1.18     KP        1.02     
!   LA        1.03     MK        0.97     NL        0.98     OV        0.96     
!   PT        1.03     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        1.05     HN        1.18     KP        1.04     
!   LA        1.05     MK        0.98     NL        0.93     OV        0.64     
!   PT        1.07     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.173261Jy  sigma=0.892221
! Fit after  self-cal, rms=0.125400Jy  sigma=0.512905
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.05 mas, bmaj=7.94 mas, bpa=-5.377 degrees
! Estimated noise=1.71909 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353445 Jy
! Component: 100  -  total flux cleaned = 0.00381448 Jy
! Component: 150  -  total flux cleaned = 0.00381732 Jy
! Component: 200  -  total flux cleaned = 0.0037183 Jy
! Total flux subtracted in 200 components = 0.0037183 Jy
! Clean residual min=-0.012863 max=0.013974 Jy/beam
! Clean residual mean=-0.000083 rms=0.003171 Jy/beam
! Combined flux in latest and established models = 0.701553 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 33 components and 0.701553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124877Jy  sigma=0.511548
! Fit after  self-cal, rms=0.125064Jy  sigma=0.510841
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.125064Jy  sigma=0.510841
! Fit after  self-cal, rms=0.084581Jy  sigma=0.425093
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.049 mas, bmaj=7.933 mas, bpa=-5.461 degrees
! Estimated noise=1.71569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.74267e-05 Jy
! Component: 100  -  total flux cleaned = -0.000304287 Jy
! Component: 150  -  total flux cleaned = -0.000394476 Jy
! Component: 200  -  total flux cleaned = -0.000434998 Jy
! Total flux subtracted in 200 components = -0.000434998 Jy
! Clean residual min=-0.003250 max=0.003321 Jy/beam
! Clean residual mean=-0.000014 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.701118 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.701118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084472Jy  sigma=0.424592
! Fit after  self-cal, rms=0.084475Jy  sigma=0.424373
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (28, -94).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168399 Jy
! Component: 100  -  total flux cleaned = 0.00144668 Jy
! Component: 150  -  total flux cleaned = 0.00116673 Jy
! Component: 200  -  total flux cleaned = 0.000920416 Jy
! Total flux subtracted in 200 components = 0.000920416 Jy
! Clean residual min=-0.002832 max=0.002846 Jy/beam
! Clean residual mean=-0.000011 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.702039 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 51 components and 0.702039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084296Jy  sigma=0.423446
! Fit after  self-cal, rms=0.084286Jy  sigma=0.423403
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084286Jy  sigma=0.423403
! Fit after  self-cal, rms=0.084215Jy  sigma=0.423356
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.048 mas, bmaj=7.932 mas, bpa=-5.47 degrees
! Estimated noise=1.7139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000189162 Jy
! Component: 100  -  total flux cleaned = -0.000295406 Jy
! Component: 150  -  total flux cleaned = -0.000437737 Jy
! Component: 200  -  total flux cleaned = -0.000523558 Jy
! Total flux subtracted in 200 components = -0.000523558 Jy
! Clean residual min=-0.002742 max=0.002720 Jy/beam
! Clean residual mean=-0.000011 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.701515 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 55 components and 0.701515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084145Jy  sigma=0.423012
! Fit after  self-cal, rms=0.084145Jy  sigma=0.422968
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173712 Jy
! Component: 100  -  total flux cleaned = -0.000290918 Jy
! Component: 150  -  total flux cleaned = -0.000326541 Jy
! Component: 200  -  total flux cleaned = -0.000328011 Jy
! Total flux subtracted in 200 components = -0.000328011 Jy
! Clean residual min=-0.002706 max=0.002679 Jy/beam
! Clean residual mean=-0.000011 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.701187 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 62 components and 0.701187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084102Jy  sigma=0.422779
! Fit after  self-cal, rms=0.084101Jy  sigma=0.422740
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084101Jy  sigma=0.422740
! Fit after  self-cal, rms=0.084077Jy  sigma=0.422723
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.603 mas, bmaj=17.89 mas, bpa=-1.942 degrees
! Estimated noise=2.20215 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132465 Jy
! Component: 100  -  total flux cleaned = -0.000194949 Jy
! Component: 150  -  total flux cleaned = -0.00019169 Jy
! Component: 200  -  total flux cleaned = -0.000235627 Jy
! Total flux subtracted in 200 components = -0.000235627 Jy
! Clean residual min=-0.003091 max=0.002942 Jy/beam
! Clean residual mean=-0.000024 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.700951 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 69 components and 0.700951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084060Jy  sigma=0.422698
! Fit after  self-cal, rms=0.084059Jy  sigma=0.422640
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.1289e-05 Jy
! Component: 100  -  total flux cleaned = -7.53551e-05 Jy
! Component: 150  -  total flux cleaned = -9.43954e-05 Jy
! Component: 200  -  total flux cleaned = -0.000130297 Jy
! Total flux subtracted in 200 components = -0.000130297 Jy
! Clean residual min=-0.003099 max=0.002935 Jy/beam
! Clean residual mean=-0.000024 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.700821 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 72 components and 0.700821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084049Jy  sigma=0.422648
! Fit after  self-cal, rms=0.084048Jy  sigma=0.422596
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.048 mas, bmaj=7.93 mas, bpa=-5.465 degrees
! Estimated noise=1.71302 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.048 x 7.93 at -5.465 degrees (North through East)
! Clean map  min=-0.0025694  max=0.60115 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084048Jy  sigma=0.422596
! Fit after  self-cal, rms=0.078908Jy  sigma=0.386796
! Inverting map and beam 
! Estimated beam: bmin=3.047 mas, bmaj=7.934 mas, bpa=-5.486 degrees
! Estimated noise=1.71311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000153664 Jy
! Component: 100  -  total flux cleaned = -0.000190907 Jy
! Component: 150  -  total flux cleaned = -0.000163643 Jy
! Component: 200  -  total flux cleaned = -0.00013762 Jy
! Total flux subtracted in 200 components = -0.00013762 Jy
! Clean residual min=-0.002706 max=0.002532 Jy/beam
! Clean residual mean=-0.000011 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.700683 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 80 components and 0.700683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078876Jy  sigma=0.386647
! Fit after  self-cal, rms=0.078876Jy  sigma=0.386619
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000213414 Jy
! Component: 100  -  total flux cleaned = -0.00018711 Jy
! Component: 150  -  total flux cleaned = -0.000162517 Jy
! Component: 200  -  total flux cleaned = -0.000139654 Jy
! Total flux subtracted in 200 components = -0.000139654 Jy
! Clean residual min=-0.002702 max=0.002483 Jy/beam
! Clean residual mean=-0.000011 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.700544 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 84 components and 0.700544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078853Jy  sigma=0.386523
! Fit after  self-cal, rms=0.078854Jy  sigma=0.386502
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078854Jy  sigma=0.386502
! Fit after  self-cal, rms=0.078874Jy  sigma=0.386494
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.581 mas, bmaj=6.925 mas, bpa=-5.895 degrees
! Estimated noise=2.31248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.475082 Jy
! Component: 100  -  total flux cleaned = 0.601221 Jy
! Component: 150  -  total flux cleaned = 0.649311 Jy
! Component: 200  -  total flux cleaned = 0.669785 Jy
! Total flux subtracted in 200 components = 0.669785 Jy
! Clean residual min=-0.005721 max=0.010952 Jy/beam
! Clean residual mean=-0.000008 rms=0.001627 Jy/beam
! Combined flux in latest and established models = 0.669786 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.669786 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.047 mas, bmaj=7.933 mas, bpa=-5.482 degrees
! Estimated noise=1.71285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127833 Jy
! Component: 100  -  total flux cleaned = 0.0195499 Jy
! Component: 150  -  total flux cleaned = 0.0236399 Jy
! Component: 200  -  total flux cleaned = 0.0259605 Jy
! Total flux subtracted in 200 components = 0.0259605 Jy
! Clean residual min=-0.003110 max=0.002687 Jy/beam
! Clean residual mean=-0.000013 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.695746 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 72 components and 0.695746 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.603 mas, bmaj=17.9 mas, bpa=-1.964 degrees
! Estimated noise=2.20183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253197 Jy
! Component: 100  -  total flux cleaned = 0.00311089 Jy
! Component: 150  -  total flux cleaned = 0.00357284 Jy
! Component: 200  -  total flux cleaned = 0.00389377 Jy
! Total flux subtracted in 200 components = 0.00389377 Jy
! Clean residual min=-0.003050 max=0.003156 Jy/beam
! Clean residual mean=-0.000024 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.69964 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119824 Jy
! Component: 100  -  total flux cleaned = 0.000171633 Jy
! Component: 150  -  total flux cleaned = 0.000219055 Jy
! Component: 200  -  total flux cleaned = 0.000240394 Jy
! Total flux subtracted in 200 components = 0.000240394 Jy
! Clean residual min=-0.003033 max=0.003216 Jy/beam
! Clean residual mean=-0.000024 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.69988 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 130 components and 0.69988 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.047 mas, bmaj=7.933 mas, bpa=-5.482 degrees
! Estimated noise=1.71285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.59492e-05 Jy
! Component: 100  -  total flux cleaned = 7.91163e-05 Jy
! Component: 150  -  total flux cleaned = 8.00642e-05 Jy
! Component: 200  -  total flux cleaned = 0.000201683 Jy
! Total flux subtracted in 200 components = 0.000201683 Jy
! Clean residual min=-0.002551 max=0.002597 Jy/beam
! Clean residual mean=-0.000011 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.700082 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 147 components and 0.700082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078885Jy  sigma=0.386578
! Fit after  self-cal, rms=0.078873Jy  sigma=0.386443
wmodel J0525-2338_S_map.mod
! Writing 147 model components to file: J0525-2338_S_map.mod
wobs   J0525-2338_S_uvs.fits
! Writing UV FITS file: J0525-2338_S_uvs.fits
wwins  J0525-2338_S_map.win
! wwins: Wrote 3 windows to J0525-2338_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000773098 Jy
! Component: 100  -  total flux cleaned = -0.00121513 Jy
! Component: 150  -  total flux cleaned = -0.00130002 Jy
! Component: 200  -  total flux cleaned = -0.00142013 Jy
! Component: 250  -  total flux cleaned = -0.0013819 Jy
! Component: 300  -  total flux cleaned = -0.00134475 Jy
! Component: 350  -  total flux cleaned = -0.00120045 Jy
! Component: 400  -  total flux cleaned = -0.00116503 Jy
! Component: 450  -  total flux cleaned = -0.0010628 Jy
! Component: 500  -  total flux cleaned = -0.000996904 Jy
! Component: 550  -  total flux cleaned = -0.000964458 Jy
! Component: 600  -  total flux cleaned = -0.000964577 Jy
! Component: 650  -  total flux cleaned = -0.000964397 Jy
! Component: 700  -  total flux cleaned = -0.000964088 Jy
! Component: 750  -  total flux cleaned = -0.000963918 Jy
! Component: 800  -  total flux cleaned = -0.000993397 Jy
! Component: 850  -  total flux cleaned = -0.000964438 Jy
! Component: 900  -  total flux cleaned = -0.000879699 Jy
! Component: 950  -  total flux cleaned = -0.000879632 Jy
! Component: 1000  -  total flux cleaned = -0.000934129 Jy
! Component: 1050  -  total flux cleaned = -0.000960534 Jy
! Component: 1100  -  total flux cleaned = -0.000906672 Jy
! Component: 1150  -  total flux cleaned = -0.000933256 Jy
! Component: 1200  -  total flux cleaned = -0.000933209 Jy
! Component: 1250  -  total flux cleaned = -0.000881861 Jy
! Component: 1300  -  total flux cleaned = -0.000907486 Jy
! Component: 1350  -  total flux cleaned = -0.000882187 Jy
! Component: 1400  -  total flux cleaned = -0.000857448 Jy
! Component: 1450  -  total flux cleaned = -0.000882313 Jy
! Component: 1500  -  total flux cleaned = -0.000881633 Jy
! Component: 1550  -  total flux cleaned = -0.000809535 Jy
! Component: 1600  -  total flux cleaned = -0.000691144 Jy
! Component: 1650  -  total flux cleaned = -0.000667854 Jy
! Component: 1700  -  total flux cleaned = -0.000598575 Jy
! Component: 1750  -  total flux cleaned = -0.000621449 Jy
! Component: 1800  -  total flux cleaned = -0.00055334 Jy
! Component: 1850  -  total flux cleaned = -0.000485629 Jy
! Component: 1900  -  total flux cleaned = -0.00041909 Jy
! Component: 1950  -  total flux cleaned = -0.000419321 Jy
! Component: 2000  -  total flux cleaned = -0.000353923 Jy
! Component: 2050  -  total flux cleaned = -0.000310972 Jy
! Component: 2100  -  total flux cleaned = -0.000289785 Jy
! Component: 2150  -  total flux cleaned = -0.000331977 Jy
! Component: 2200  -  total flux cleaned = -0.000226884 Jy
! Component: 2250  -  total flux cleaned = -0.00028944 Jy
! Component: 2300  -  total flux cleaned = -0.000207237 Jy
! Component: 2350  -  total flux cleaned = -0.000227633 Jy
! Component: 2400  -  total flux cleaned = -0.000167356 Jy
! Component: 2450  -  total flux cleaned = -0.000167561 Jy
! Component: 2500  -  total flux cleaned = -0.000147809 Jy
! Component: 2550  -  total flux cleaned = -0.00014785 Jy
! Component: 2600  -  total flux cleaned = -0.000109044 Jy
! Component: 2650  -  total flux cleaned = -0.000147743 Jy
! Component: 2700  -  total flux cleaned = -0.000128386 Jy
! Component: 2750  -  total flux cleaned = 4.26309e-06 Jy
! Component: 2800  -  total flux cleaned = -7.13012e-05 Jy
! Component: 2850  -  total flux cleaned = -7.12994e-05 Jy
! Component: 2900  -  total flux cleaned = -3.44354e-05 Jy
! Component: 2950  -  total flux cleaned = -8.97388e-05 Jy
! Component: 3000  -  total flux cleaned = -8.96317e-05 Jy
! Component: 3050  -  total flux cleaned = -8.96035e-05 Jy
! Component: 3100  -  total flux cleaned = -0.0001254 Jy
! Component: 3150  -  total flux cleaned = -8.96727e-05 Jy
! Component: 3200  -  total flux cleaned = -0.000142683 Jy
! Component: 3250  -  total flux cleaned = -0.000159999 Jy
! Component: 3300  -  total flux cleaned = -0.000107669 Jy
! Component: 3350  -  total flux cleaned = -0.000125049 Jy
! Component: 3400  -  total flux cleaned = -9.07206e-05 Jy
! Component: 3450  -  total flux cleaned = -0.000175903 Jy
! Component: 3500  -  total flux cleaned = -0.000108269 Jy
! Component: 3550  -  total flux cleaned = -0.000108587 Jy
! Component: 3600  -  total flux cleaned = -0.000158745 Jy
! Component: 3650  -  total flux cleaned = -0.000158722 Jy
! Component: 3700  -  total flux cleaned = -0.000224731 Jy
! Component: 3750  -  total flux cleaned = -0.000241113 Jy
! Component: 3800  -  total flux cleaned = -0.000257398 Jy
! Component: 3850  -  total flux cleaned = -0.00025733 Jy
! Component: 3900  -  total flux cleaned = -0.000289631 Jy
! Component: 3950  -  total flux cleaned = -0.000305775 Jy
! Component: 4000  -  total flux cleaned = -0.000353774 Jy
! Component: 4050  -  total flux cleaned = -0.000353773 Jy
! Total flux subtracted in 4096 components = -0.000385384 Jy
! Clean residual min=-0.000924 max=0.000946 Jy/beam
! Clean residual mean=-0.000004 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.699697 Jy
keep
! Adding 275 model components to the UV plane model.
! The established model now contains 422 components and 0.699696 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0525-2338_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.047 x 7.933 at -5.482 degrees (North through East)
! Clean map  min=-0.0019786  max=0.60565 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0525-2338_S_map.fits
wmodel /image_prod/ug002_uva//J0525-2338_S_map.mod
! Writing 422 model components to file: /image_prod/ug002_uva//J0525-2338_S_map.mod
wobs   /image_prod/ug002_uva//J0525-2338_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0525-2338_S_uvs.fits
wwins  /image_prod/ug002_uva//J0525-2338_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0525-2338_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.605654 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000277055 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.137234 0.137234 0.274468 0.548937 1.09787 2.19575 4.3915 8.78299 17.566 35.132 70.2639
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.605 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2186.04 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0525-2338_S_dfm.log closed on Wed Mar  4 20:50:32 2020