! Started logfile: /image_prod/ug002_uva//J0524-3126_S_dfm.log on Wed Mar  4 20:50:18 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0524-3126_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0524-3126_S_uva.fits
! AN table 1: 30 integrations on 1 of 1 possible baselines.
! AN table 2: 60 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.860465 visibilities/baseline/integration-bin.
! Found source: J0524-3126
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3330 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0524-3126_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  A total of 30 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  A total of 30 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  A total of 30 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.011463Jy  sigma=6.636380
! Fit after  self-cal, rms=0.941302Jy  sigma=6.180366
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.538 mas, bmaj=36.62 mas, bpa=24.18 degrees
! Estimated noise=3.49082 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.5, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0482973 Jy
! Component: 100  -  total flux cleaned = 0.0621098 Jy
! Total flux subtracted in 100 components = 0.0621098 Jy
! Clean residual min=-0.007419 max=0.007019 Jy/beam
! Clean residual mean=-0.000049 rms=0.002276 Jy/beam
! Combined flux in latest and established models = 0.0621098 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.0621098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079927Jy  sigma=0.456595
! Fit after  self-cal, rms=0.078370Jy  sigma=0.444053
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.047 mas, bmaj=36.81 mas, bpa=23.53 degrees
! Estimated noise=1.96028 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00998223 Jy
! Component: 100  -  total flux cleaned = 0.0156345 Jy
! Component: 150  -  total flux cleaned = 0.0183807 Jy
! Component: 200  -  total flux cleaned = 0.0198733 Jy
! Total flux subtracted in 200 components = 0.0198733 Jy
! Clean residual min=-0.002765 max=0.002996 Jy/beam
! Clean residual mean=0.000008 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.0819831 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 93 components and 0.0819831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077151Jy  sigma=0.433406
! Fit after  self-cal, rms=0.076844Jy  sigma=0.430914
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.047 x 36.81 at 23.53 degrees (North through East)
! Clean map  min=-0.0034616  max=0.062436 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   NL        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.87     FD        1.01     KP        0.97     LA        0.95     
!   OV        0.99     PT        0.98     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   NL        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.19     FD        0.85     KP        1.08     LA        0.97     
!   OV        1.05     PT        1.00     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   NL        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.98     KP        1.05     LA        0.97     
!   OV        0.88     PT        1.00     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.076844Jy  sigma=0.430914
! Fit after  self-cal, rms=0.076405Jy  sigma=0.428867
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.08 mas, bmaj=36.85 mas, bpa=23.5 degrees
! Estimated noise=1.90263 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231613 Jy
! Component: 100  -  total flux cleaned = 0.00194406 Jy
! Component: 150  -  total flux cleaned = 0.00165185 Jy
! Component: 200  -  total flux cleaned = 0.00137887 Jy
! Total flux subtracted in 200 components = 0.00137887 Jy
! Clean residual min=-0.002719 max=0.002819 Jy/beam
! Clean residual mean=0.000011 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.0833619 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 111 components and 0.0833619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076263Jy  sigma=0.427944
! Fit after  self-cal, rms=0.076386Jy  sigma=0.427576
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076386Jy  sigma=0.427576
! Fit after  self-cal, rms=0.077715Jy  sigma=0.426836
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.04 mas, bmaj=36.85 mas, bpa=23.46 degrees
! Estimated noise=1.90086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000543423 Jy
! Component: 100  -  total flux cleaned = 0.00045676 Jy
! Component: 150  -  total flux cleaned = 0.000492462 Jy
! Component: 200  -  total flux cleaned = 0.000459319 Jy
! Total flux subtracted in 200 components = 0.000459319 Jy
! Clean residual min=-0.002501 max=0.002720 Jy/beam
! Clean residual mean=0.000005 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.0838213 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 129 components and 0.0838212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077655Jy  sigma=0.426509
! Fit after  self-cal, rms=0.077666Jy  sigma=0.426416
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000160337 Jy
! Component: 100  -  total flux cleaned = 0.000160356 Jy
! Component: 150  -  total flux cleaned = 0.000129305 Jy
! Component: 200  -  total flux cleaned = 0.000157677 Jy
! Total flux subtracted in 200 components = 0.000157677 Jy
! Clean residual min=-0.002287 max=0.002718 Jy/beam
! Clean residual mean=0.000005 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.0839789 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 137 components and 0.0839789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077624Jy  sigma=0.426265
! Fit after  self-cal, rms=0.077612Jy  sigma=0.426246
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077612Jy  sigma=0.426246
! Fit after  self-cal, rms=0.077785Jy  sigma=0.426116
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.02 mas, bmaj=36.82 mas, bpa=23.45 degrees
! Estimated noise=1.89637 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136665 Jy
! Component: 100  -  total flux cleaned = 0.000136079 Jy
! Component: 150  -  total flux cleaned = 0.000136353 Jy
! Component: 200  -  total flux cleaned = 0.000135915 Jy
! Total flux subtracted in 200 components = 0.000135915 Jy
! Clean residual min=-0.002148 max=0.002744 Jy/beam
! Clean residual mean=0.000006 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.0841148 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 146 components and 0.0841148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077753Jy  sigma=0.425978
! Fit after  self-cal, rms=0.077751Jy  sigma=0.425955
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.42564e-05 Jy
! Component: 100  -  total flux cleaned = -4.40061e-05 Jy
! Component: 150  -  total flux cleaned = -6.78774e-05 Jy
! Component: 200  -  total flux cleaned = -6.67741e-05 Jy
! Total flux subtracted in 200 components = -6.67741e-05 Jy
! Clean residual min=-0.002092 max=0.002720 Jy/beam
! Clean residual mean=0.000005 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.0840481 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 156 components and 0.0840481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077726Jy  sigma=0.425871
! Fit after  self-cal, rms=0.077718Jy  sigma=0.425863
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077718Jy  sigma=0.425863
! Fit after  self-cal, rms=0.077500Jy  sigma=0.425846
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.45 mas, bmaj=41.08 mas, bpa=12.09 degrees
! Estimated noise=2.01139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00018914 Jy
! Component: 100  -  total flux cleaned = 0.000172198 Jy
! Component: 150  -  total flux cleaned = 0.000141197 Jy
! Component: 200  -  total flux cleaned = 0.000113926 Jy
! Total flux subtracted in 200 components = 0.000113926 Jy
! Clean residual min=-0.002062 max=0.002735 Jy/beam
! Clean residual mean=0.000007 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.084162 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 180 components and 0.084162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077491Jy  sigma=0.425827
! Fit after  self-cal, rms=0.077492Jy  sigma=0.425818
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.63335e-05 Jy
! Component: 100  -  total flux cleaned = -9.97979e-05 Jy
! Component: 150  -  total flux cleaned = -0.000139659 Jy
! Component: 200  -  total flux cleaned = -0.000151538 Jy
! Total flux subtracted in 200 components = -0.000151538 Jy
! Clean residual min=-0.002076 max=0.002729 Jy/beam
! Clean residual mean=0.000005 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.0840104 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 197 components and 0.0840104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077487Jy  sigma=0.425809
! Fit after  self-cal, rms=0.077488Jy  sigma=0.425804
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.005 mas, bmaj=36.8 mas, bpa=23.44 degrees
! Estimated noise=1.89472 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.005 x 36.8 at 23.44 degrees (North through East)
! Clean map  min=-0.0037297  max=0.059867 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.53 mas, bmaj=36.47 mas, bpa=24.11 degrees
! Estimated noise=3.32975 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.046291 Jy
! Component: 100  -  total flux cleaned = 0.061713 Jy
! Component: 150  -  total flux cleaned = 0.0704397 Jy
! Component: 200  -  total flux cleaned = 0.0742827 Jy
! Total flux subtracted in 200 components = 0.0742827 Jy
! Clean residual min=-0.006662 max=0.005371 Jy/beam
! Clean residual mean=-0.000010 rms=0.001897 Jy/beam
! Combined flux in latest and established models = 0.0742827 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 51 model components to the UV plane model.
! The established model now contains 51 components and 0.0742827 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.005 mas, bmaj=36.8 mas, bpa=23.44 degrees
! Estimated noise=1.89472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-15.5, -10.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0068802 Jy
! Component: 100  -  total flux cleaned = 0.00908316 Jy
! Component: 150  -  total flux cleaned = 0.00977295 Jy
! Component: 200  -  total flux cleaned = 0.0101497 Jy
! Total flux subtracted in 200 components = 0.0101497 Jy
! Clean residual min=-0.002735 max=0.002789 Jy/beam
! Clean residual mean=0.000011 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.0844324 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 99 components and 0.0844324 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.45 mas, bmaj=41.08 mas, bpa=12.09 degrees
! Estimated noise=2.01139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118539 Jy
! Component: 100  -  total flux cleaned = 0.00179656 Jy
! Component: 150  -  total flux cleaned = 0.00210782 Jy
! Component: 200  -  total flux cleaned = 0.00236843 Jy
! Total flux subtracted in 200 components = 0.00236843 Jy
! Clean residual min=-0.002119 max=0.002306 Jy/beam
! Clean residual mean=0.000012 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.0868009 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.74667e-05 Jy
! Component: 100  -  total flux cleaned = 0.000157516 Jy
! Component: 150  -  total flux cleaned = 0.000239766 Jy
! Component: 200  -  total flux cleaned = 0.000340267 Jy
! Total flux subtracted in 200 components = 0.000340267 Jy
! Clean residual min=-0.002187 max=0.002222 Jy/beam
! Clean residual mean=0.000009 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.0871411 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 160 components and 0.0871411 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.005 mas, bmaj=36.8 mas, bpa=23.44 degrees
! Estimated noise=1.89472 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000370573 Jy
! Component: 100  -  total flux cleaned = 0.000615227 Jy
! Component: 150  -  total flux cleaned = 0.000746533 Jy
! Component: 200  -  total flux cleaned = 0.000864094 Jy
! Total flux subtracted in 200 components = 0.000864094 Jy
! Clean residual min=-0.002058 max=0.002286 Jy/beam
! Clean residual mean=0.000007 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.0880052 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 192 components and 0.0880052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077420Jy  sigma=0.425412
! Fit after  self-cal, rms=0.077431Jy  sigma=0.425288
wmodel J0524-3126_S_map.mod
! Writing 192 model components to file: J0524-3126_S_map.mod
wobs   J0524-3126_S_uvs.fits
! Writing UV FITS file: J0524-3126_S_uvs.fits
wwins  J0524-3126_S_map.win
! wwins: Wrote 2 windows to J0524-3126_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000927611 Jy
! Component: 100  -  total flux cleaned = 0.00096158 Jy
! Component: 150  -  total flux cleaned = 0.000899892 Jy
! Component: 200  -  total flux cleaned = 0.000784636 Jy
! Component: 250  -  total flux cleaned = 0.000650496 Jy
! Component: 300  -  total flux cleaned = 0.000547427 Jy
! Component: 350  -  total flux cleaned = 0.000570794 Jy
! Component: 400  -  total flux cleaned = 0.000593113 Jy
! Component: 450  -  total flux cleaned = 0.000659826 Jy
! Component: 500  -  total flux cleaned = 0.000681306 Jy
! Component: 550  -  total flux cleaned = 0.000702111 Jy
! Component: 600  -  total flux cleaned = 0.000682461 Jy
! Component: 650  -  total flux cleaned = 0.000682616 Jy
! Component: 700  -  total flux cleaned = 0.00070192 Jy
! Component: 750  -  total flux cleaned = 0.000683256 Jy
! Component: 800  -  total flux cleaned = 0.000646875 Jy
! Component: 850  -  total flux cleaned = 0.000557138 Jy
! Component: 900  -  total flux cleaned = 0.000416759 Jy
! Component: 950  -  total flux cleaned = 0.000313555 Jy
! Component: 1000  -  total flux cleaned = 0.000212158 Jy
! Component: 1050  -  total flux cleaned = 9.58617e-05 Jy
! Component: 1100  -  total flux cleaned = -3.49935e-05 Jy
! Component: 1150  -  total flux cleaned = -0.000131441 Jy
! Component: 1200  -  total flux cleaned = -0.000210584 Jy
! Component: 1250  -  total flux cleaned = -0.000303926 Jy
! Component: 1300  -  total flux cleaned = -0.000458068 Jy
! Component: 1350  -  total flux cleaned = -0.000610399 Jy
! Component: 1400  -  total flux cleaned = -0.000746055 Jy
! Component: 1450  -  total flux cleaned = -0.000790875 Jy
! Component: 1500  -  total flux cleaned = -0.000820755 Jy
! Component: 1550  -  total flux cleaned = -0.000850476 Jy
! Component: 1600  -  total flux cleaned = -0.000894864 Jy
! Component: 1650  -  total flux cleaned = -0.000939047 Jy
! Component: 1700  -  total flux cleaned = -0.000953655 Jy
! Component: 1750  -  total flux cleaned = -0.00102724 Jy
! Component: 1800  -  total flux cleaned = -0.00108614 Jy
! Component: 1850  -  total flux cleaned = -0.00113023 Jy
! Component: 1900  -  total flux cleaned = -0.00120391 Jy
! Component: 1950  -  total flux cleaned = -0.00124823 Jy
! Component: 2000  -  total flux cleaned = -0.00130758 Jy
! Component: 2050  -  total flux cleaned = -0.00138194 Jy
! Component: 2100  -  total flux cleaned = -0.00145666 Jy
! Component: 2150  -  total flux cleaned = -0.00151671 Jy
! Component: 2200  -  total flux cleaned = -0.00159198 Jy
! Component: 2250  -  total flux cleaned = -0.00166759 Jy
! Component: 2300  -  total flux cleaned = -0.00172842 Jy
! Component: 2350  -  total flux cleaned = -0.00183538 Jy
! Component: 2400  -  total flux cleaned = -0.00192787 Jy
! Component: 2450  -  total flux cleaned = -0.00200533 Jy
! Component: 2500  -  total flux cleaned = -0.00206796 Jy
! Component: 2550  -  total flux cleaned = -0.00217847 Jy
! Component: 2600  -  total flux cleaned = -0.0022901 Jy
! Component: 2650  -  total flux cleaned = -0.00235457 Jy
! Component: 2700  -  total flux cleaned = -0.00241936 Jy
! Component: 2750  -  total flux cleaned = -0.00253407 Jy
! Component: 2800  -  total flux cleaned = -0.00260042 Jy
! Component: 2850  -  total flux cleaned = -0.00266729 Jy
! Component: 2900  -  total flux cleaned = -0.00275177 Jy
! Component: 2950  -  total flux cleaned = -0.00283722 Jy
! Component: 3000  -  total flux cleaned = -0.00294073 Jy
! Component: 3050  -  total flux cleaned = -0.00302785 Jy
! Component: 3100  -  total flux cleaned = -0.00313377 Jy
! Component: 3150  -  total flux cleaned = -0.00322306 Jy
! Component: 3200  -  total flux cleaned = -0.00333143 Jy
! Component: 3250  -  total flux cleaned = -0.00342257 Jy
! Component: 3300  -  total flux cleaned = -0.00353347 Jy
! Component: 3350  -  total flux cleaned = -0.00368352 Jy
! Component: 3400  -  total flux cleaned = -0.00375985 Jy
! Component: 3450  -  total flux cleaned = -0.00387529 Jy
! Component: 3500  -  total flux cleaned = -0.00401189 Jy
! Component: 3550  -  total flux cleaned = -0.00413088 Jy
! Component: 3600  -  total flux cleaned = -0.00425145 Jy
! Component: 3650  -  total flux cleaned = -0.00437354 Jy
! Component: 3700  -  total flux cleaned = -0.00449717 Jy
! Component: 3750  -  total flux cleaned = -0.00462247 Jy
! Component: 3800  -  total flux cleaned = -0.0047713 Jy
! Component: 3850  -  total flux cleaned = -0.00487903 Jy
! Component: 3900  -  total flux cleaned = -0.00498832 Jy
! Component: 3950  -  total flux cleaned = -0.00509899 Jy
! Component: 4000  -  total flux cleaned = -0.005234 Jy
! Component: 4050  -  total flux cleaned = -0.00534823 Jy
! Total flux subtracted in 4096 components = -0.00546425 Jy
! Clean residual min=-0.001182 max=0.001218 Jy/beam
! Clean residual mean=-0.000007 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.082541 Jy
keep
! Adding 272 model components to the UV plane model.
! The established model now contains 464 components and 0.0825411 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0524-3126_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.005 x 36.8 at 23.44 degrees (North through East)
! Clean map  min=-0.002479  max=0.059899 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0524-3126_S_map.fits
wmodel /image_prod/ug002_uva//J0524-3126_S_map.mod
! Writing 464 model components to file: /image_prod/ug002_uva//J0524-3126_S_map.mod
wobs   /image_prod/ug002_uva//J0524-3126_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0524-3126_S_uvs.fits
wwins  /image_prod/ug002_uva//J0524-3126_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0524-3126_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0598987 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00047908 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.39945 2.39945 4.7989 9.5978 19.1956 38.3912 76.7824
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.059 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  125.028 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0524-3126_S_dfm.log closed on Wed Mar  4 20:50:22 2020